Computer does not notice that my iPod is connected

Whenever I plug my iPod into my computer, My iPod will light up, but iTunes doesn't notice it is there, and neither does my computer, it will not charge or sync music which is very annoying, seeing as I just got it for Christmas...
Help me please, any ideas are welcome,
Thanks in advance

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

Similar Messages

  • My iPod is connected to my computer. The iPod registers that it is connected to the computer, but iTunes and my computer do not register that my iPod is connected. I have tried to update and re-install but nothing is working. Can anyone help me out please

    So I am trying to connect my ipod to my itunes So I can transfer music from CDS I have on to my ipod...The ipod says it's connected to the computer,But itunes and my conputer do not register my ipod is connected...I have trierd to update and reintalinng it and still not working...Anyone wanna help me please

    tmplHi pranoop,
    If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • I updated my computer to os x 10.5.8 so I can synchronize iphone with itunes.  For some reason computer does not noticed it has been updated.  Can anyone advise?

    I updated my computer to os x 10.5.8 so I can synchronize iphone with itunes.  For some reason computer does not noticed it has been updated.  Can anyone advise?

    Try what Terence Devlin posted in this topic:
    Terence Devlin
    Apr 14, 2015 11:21 AM
    Re: Is Iphoto gone ? i want it back!
    in response to Johannes666
    Recommended
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Computer does not recognize my new ipod model A1446

    My computer does not recognize my new ipod model A1446.  Cannot set up or sinc

    You are under warranty.  Call iPod Nano tech support. 

  • Windows not recognizing that my ipod is connected

    Right now im annoyed!! What happened is this! I got a ipon nano for christmas and installed all the software on my mums computer at home, the ipod worked fine. I returned to my house after xmas and installed the software again, and everytime i instert my wire nothing happens, the screen on my ipod doesnt change and itunes says that no ipod is connected. I tried uninstalling everything and reinstalling, still didnt work, so then tried installing updater, but asked me to connect ipod to update, still didnt recognize my ipod. I read through all of my leaflets and noticed that it said that ipod can onloy be installed on any one computer or apple device at anytime?
    So yesterday i went into the apple store, and they played around with my wire as they thought it might be the problem, they were NO help at all, just told me it worked and theres and to go home and try it, needles to say it didnt work, ive just tried my wire in my friends laptop who is an ipod shuffle and it worked fine. Now what the **** is going on?? its utterly disgraceful that these things cost so much and i cant use it!

    Okay, first, lets try putting the iPod into Disk Mode then it should be recognized by the computer. Does it say "Do Not Disconnect" on the iPod when it's connected?

  • Computer does not boot when pxi 1033 is connected

    hiiiiii...........i am using NI pxi-1033 for my application & this pxi is connected to my system through PCIe-8361. i am using it from last 10 months, now suddenly my computer does not boot up. i start pxi first then start the computer but computer screen shows no signal. there is no blue screen error.
    can you give me any point to troubleshoot the problem.

    This probably doesn't help, since your setup used to work, but I have had to run the MXI Compatibility Tool on more than one PC.
    http://joule.ni.com/nidu/cds/view/p/id/3119/lang/en
    One PC would only boot one time in ten, before running the tool.

  • Computer does not recognize that I have plugged in a headset?

        I have tried a variety of things, currently I have disabled speakers and headphones such that the sound on my computer flows through my headphones, however I'd like to fix this problem since i ant to use the mic on my headset as well. The headset does not appear on my playback devices. I am using windows 7.

    Hello Shern,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your Windows 7 computer recognising the headset mic. I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As with this we can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Computers not recognizing that my ipod is connected

    Not too long ago, my ipod froze. It was left to die therefore it could be charged back to life, and the battery did die, but now it won't charge because not a single computer is recognizing that the ipod has been connected. I've tried more than one computer, (2 PC's, 1 mac - right now it's restored to a PC), i've tried more than one cable, and I've even tried to charge it in my boyfriends car ipod charger/tuner player (and his ipod works perfectly fine on it)!
    The ipod turns on, so an apple is seen on the screen, but after a few minutes while it's still on the screen, it shuts itself off and says "Please Wait Very Low Battery" but I can't charge it! I'm so confused!
    I'm very confused and would like to try to fix this asap!
    If anyone has any idea what to do, please, I'd greatly appreciate it!

    I received some help from my brother, and searched how to put the ipod in disk mode, and so far it has been charging and is showing up in my itunes!

  • ITunes does not start automatically when iPod is connected

    iTunes used to start automatically when I connected iTunes. It no longer does. Can I fix that?
    Dave

    Connect your iPod and open iTunes. Towards the bottom of the iPod screen, there are four check boxes. The top one says "Open iTunes when iPod is connected." Check that box and click apply. If it is checked, uncheck it and click apply, eject and reconnect your iPod, then recheck it and click apply.

  • HT1351 my computer cant even tell that my ipod is connected.

    my computer cant even tell my ipod is connected. the cable is connected to my ipod and the other side to my usb port, what should i do?

    Well.
    It was the cord.
    I was using a third party one that didn't jive well with my new laptop.

  • Trying to sync my husbands old Ipad to my computer and the computer does not recognize it as even being connected.  When I open Itunes nothing shows to sync.

    I am trying to sync an old Ipad to my computer.  It says it is version 3.2.  When I plug it into my USB, nothing happens.  My computer will not even recognize it.  I can sync my Ipad 2 and all Ipods with no problem.  Have no idea what to do???????????????

    ipadsammamish wrote:
    I am trying to sync an old Ipad to my computer.  It says it is version 3.2.  When I plug it into my USB, nothing happens.  ...
    Have you charged it using the Wall Charger... If not... Plug it in for about an hour and then Connect to your computer.
    There is also this, should you need it...
    iPad not appearing in iTunes

  • My old ipod classic will charge but will no longer sync to my itunes.  My computer does not recoginze that it is plugged in.  Is it time to replace it?

    My old ipod classic will charge when I plug it it in but my computer will no longer recognize that it is plugged in and Itunes will not pop up.  Is it time to retire this 5 year old classic?

    Hello, a.higgins. 
    Thank you for visiting Apple Support Communities. 
    Here are some troubleshooting steps in the article below that I would recommend going through. 
    iTunes: iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/ts1410
    Cheers,
    Jason H. 

  • My computer does not auto read my iphone when connected. How? Can't sync.

    When i plug in my iphone 3GS to my laptop, there was no auto read.
    I tried switching off my phone and rebooting my laptop and just downloaded the latest version of itunes. Nothing seemed to work. How?

    http://support.apple.com/kb/TS1495

  • Computer not recognizing that my ipod is pluged in!!

    I have recently reformatted my comeputer and got some new music put on my itunes and when i tried to plug in my ipod it just doesnt do anything...like the little screen on the ipod that usually sais "do not disconnect" doesnt come up...the computer doesnt even accnowladge that anything is pluged in...i tried downloading the newest ipod softwhare and that didnt work...i tried putting in the origional disk that came with it and that didnt do anything...also when i plug my ipod into the computer it drains the battery instead of charging it...suggestions??

    I don't know if this might work for you guys but this is what got my problem solved. If you experience the following, the Ipod was working but suddenly it stops working (i.e. the ipod screen is totally blank no icons like battery low or whatever) and when you connect it to the computer the little sign that means do not disconnect does not appear (the pc does not recognized that the ipod is connected) then maybe this might solve your problem. Do not connect the Ipod to the computer for about 24 hours. Do not try to charge it or anything just leave it by itself let the battery drained then try it the next day and hopefully the icon of battery is low will appear then you can charge it by connecting to the pc.
    This is what happened to me by accident i guess, i had given up and had realized that i had just spend two hundred dollars on something that didn't work but today i tried to turned it on and the battery is low icon appeared so i connected to the PC and now it works.
    Good Luck.

  • Computer does not recognize exteranl drive

    I have been using a Maxtor OneTouch II FireWire 800 external drive as backup for several years and it has worked fine until recently. Recently when I turn on the drive the computer does not recognize that the drive is connected on either the FireWire or USB port. I disconnected the drive and shut down the computer several times with no success. When I connect the drive to my Windows Dell laptop the laptop recognizes that the external drive is connected. Any ideas about what could be the issue with my iMac?

    All USB 1.1 devices will no doubt work on a USB 2.0 port (as long as the running system has the proper driver for it). However, not all USB 2.0 devices will work on a USB 1.1 port.
    Any suggestions about how to isolate the issue?
    The device itself (the hard drive) seems to work. To rule out FireWire port on device, you would need to connect it to another computer over FireWire to see if it works. To rule out FireWire port on iMac, you would need to connect some other FireWire device that is known to be working. For the cable, you would need to get another one that is known to be working and try it with the FireWire drive.
    Also is there anything I can try from a software perspective?
    You can start up from your Mac OS X installation disc for Panther (10.3), by inserting the disc and holding down the C key during a restart. When you get to the first Installer screen, go up to the Menu Bar under the Installer menu and select the command to run Disk Utility. See if the hard drive shows up in the Disk Utility sidebar, when you are started up from a different system.

Maybe you are looking for