Condition Record Price is not updated in Inforecord

Dear Experts
For a material , the price in the condituion record is maintained as below.But in the info record the value is showing as 14 , instead of 10 at present.
Validity from      Validity to      amount
3/2/2008     3/30/2011     14
3/31/2011     3/31/2011     10
4/1/2011     4/30/2011     14
5/1/2011     12/31/9999     10
please help how to get the condition record amount in Inforecord.
Thanks
chandra

Hi Chandra,
You should run the program "RM06INP0" with SE38 to update the latest prices in PIR.

Similar Messages

  • Po prices is not updateing from inforecord

    Guru
    In Po when enter the Material & QTy & Price for that material is appering from info earlear now  the problem is that Price is not picking from the last Po or Inforecord what must be problem. can u help me
    Thanks
    Sudhir

    Hi
    Price from inforecord has following steps
    1) System will search for inforecord with valid price if it finds then the price will be pulled to PO
    2) If there is  inforecord and no valid price then system will look for last PO to pull the price.
    3) If there is no info record then we have to enter the price manually.
    In your case check the above prerequisites additon to that
    1) If it is refering the last PO no then check whether the item is deleted or not.
    2) If it is refereing the valid price in info record then check the validity period of the PIR.
    Hope it helps.
    Thanks/Karthik

  • Inforecord Efective price is not Updating

    Dear All
    I have seen that the Effective price is not updating in Inforecord.
    Kindly can I know why it is not updating?
    I am Maintaining gross price condition
    eg:ZM00 8:00/-
    Result: Condition
    Net Price: 8.00/-
    Effective Price: 0.00/-
    Regards
    Chaitanya

    System can only update Net or Effective price in the info record based on the customizing setting made.
    sproMMPIR---Define price history.
    Reg,
    Deepak.
    Edited by: deepak k b on Oct 30, 2008 7:22 AM

  • PO price is not picking from Inforecord

    Hello All,
    When PO is created by one particular user the price is not picked from inforecord. Inforecord validity periods are active and this price is not of previous purchase order. The problem is only for this user. Can you please advice what needs to be done here.
    Thanks a lot in advance.
    Best regards,
    Raji

    Hi,
    1. Check out user profile whether EVO parameter is maintained properly for all the users.
    2. Check in EVO parameter key you set radio button on Always copy.
    EVO is parameter ID for Defining Defualt values for buyer. Relevent customization carried out in SPRO --> Mat mangt --> Pur --> Env data --> define default value for buyer.
    Rewards, if helpful to you.
    rgds,
    rajesh

  • In material master standerd price field not updating in group currency

    In material master accounting 1 tab, under price and values  table. standerd price is not updating in group currency.
    Can you sugest me how to resolve this issue

    Hi,
    As per My Knowledge,Wht ever currency is assigned as company code currency , tht will only be updated in Material Master as Per standard.
    Thanks
    Goutam

  • Last Purchase price is not updated

    Hi
    The last purchase price is not updated when posting a GRPO.
    Any Ideas?
    Its 2005 A SP01 PL48
    Thanks
    Franz

    Check this WIKI
    [Does a Goods Receipt PO update the Last Purchase Price List?|https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=36438427]

  • Unit selling price is not updating

    Hi
    I am updating unit selling price of an item using API.
    code:
       v_line_tbl (1).request_date := SYSDATE;
       v_line_tbl (1).unit_selling_price := 299;
    in the above code request_date is updating to sysdate but selling price is not updating.
    how to do this?
    Thanks

    The CALCULATE_PRICE_FLAG is in the OE_ORDER_LINES_ALL table.  This setting could override determines pricing engine calls which could be overriding your update.
    Values -
    Calculate Price (Y)
    Partial Price (P)       
    Freeze Price (N)
    Thank you,
    Debbie

  • Do something on a Record if it not updated for sometime

    I'm in need of answer for the below. Kindly help
    I would like to perform some operation on a record, if it not updated / modified for more than 30 seconds. How can we achieve this in Oracle ?

    Hi,
    You should have a column in the table called last modified date,
    which will be updated using a trigger that updates the column with sysdate when ever it is updated.
    See the follwoing
    SQL> CREATE TABLE TEST
      2  (
      3     ID             NUMBER
      4    ,LAST_MODIFIED_DATE DATE
      5  );
    Table created.
    SQL>
    SQL> CREATE OR REPLACE TRIGGER TRG_TEST_UPDATE
      2     BEFORE INSERT
      3     ON TEST
      4     FOR EACH ROW
      5  BEGIN
      6     :NEW.LAST_MODIFIED_DATE := SYSDATE;
      7  END;
      8  /
    Trigger created.
    SQL>
    SQL> INSERT INTO TEST (ID)
      2       VALUES (1);
    1 row created.
    SQL>     
    SQL> SELECT * FROM TEST;
            ID LAST_MODI
             1 08-MAR-11
    --After 30 seconds.
    SQL>     
    SQL> SELECT *
      2    FROM TEST
      3   WHERE (SYSDATE - LAST_MODIFIED_DATE) * 24 * 3600 > 30;
            ID LAST_MODI
             1 08-MAR-11
    SQL> G.

  • Missing Condition record price in PO history tab

    Hi
    I have a scenario where in the condition record values are coming in conditions tab of PO and the discounts are calculated and shows net price which is less than the Gross price in conditions tab, But when i check in Purchase order history tab, for goods receipt, only Gross price is coming not the Net price.
    can any one help in this??

    Hi,
       The po price will be greyed out if the price is determined based on discount or similar conditions. You have to change the price at item level - conditions tab.
       But in your issue, the PO is already having subsequent documents. (Hope you found the issue in dev only, not in PRD) You may cancel the already posted documents (GR and IR). Now, correct the condition type (acrual flag in M/06) and then assign the acrual key against the condition type in the pricing schema in M/08. Assign the GL account for the acrual key in OBYC. Create a new PO and test the scenario again.
    Regards,
    AKPT

  • Condition record exist but not set in SO

    Hi SDN Team,
    I have a problem.  Where in the sales order for the Discount condition type condition record where already exist in diffferent validity period.
    EG
    ZAJ1 discount condition type - with the same key combination with different valididity period
    EG:
    ZAJ1 - 27.01.2009 to 15.02.2009
    ZAJ1 - 16-02-2009 to 15-03-2009
    The reason is not set for the ZAJ1 condition in the Sales Order is due to the sales order was created before the pricing condition record validity datet.  Sales order where created on 11.02.2009.  But the condition record where valid from 16.02.2009  that is the reason the condition record was not set in the sales order.
    Based on this explanation user agreed and the call was closed. 
    I have also explained Where ZAJ1 has condition record. but which is not set in the document. if pricing was carried out again it will set the condition for the item.
    But now again the call was reopened stating that -
    At the time of creating the sales order the ZAJ1Condition record exist in the period 27-01-2009 to 15-02-2009. now the primary rebate should be used by the system. Unfortunately it did not.
    Based on the reopend call - i have further investigated the issue but i could not find the root cause.
    Based on this when i checked the previous order where the ZAJ1 condition was well picked up with the validity period 27-01-2009 to 15-02-2009, what might be the reason the condition type was not picked up in the sales order?
    Can you please let me know with your expertise in solving this issue.
    Regards,
    J

    1)Requirement is set with 2 (itme with pricing). and calculation type is assigned with own calculation type.
    2) In the pricing analysis - it shows as per below
    This message tells you that the condition record exists, but has not been set in the document. If pricing was carried out again for the document item, then the condition would be set.
    There are different reasons for this:
    The condition was deleted manually in the item condition screen.
    The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again.
    If the condition type is used for subsequent settlement (rebate), there may be subsequent updating of business volume (the agreement is is created retrospectively). The document conditions do not contain the condition record, as the condition record was not created when pricing was carried out. Updating of business volume is carried out using special functions for subsequent settlement.
    When an item was added, the condition record was accessed with key fields other than change time. This could lead to different results in the requirements check at the time of adding and the change time. This can occur when modifications are made.
    In billing (or when copying orders): Certain condition types were not determined in the source document (this is usually controlled by the pricing requirements). When creating the document, the document flow (TVCPF,TVCPA) is processed using a pricing type that does not redetermine these condition types, although they are supposed to be called via the requirements.
    Thanks,
    J

  • WHY Price is not defaulted from inforecord in a P.O with material group.

    When i tried to create P O for a material group & i mentioned material text, Price was not defaulted in PO from inforecord unless i mention inforecord number even if  i mentioned vendor & valid inforecord is exist for the same material group & vendor.

    Hi,
    Data will be adopted only from PR,RFQ & contract.Eventhough if u maintained inforecord, data will not flown from info record it is only the price picked from inforecord.
    thanks
    suresh

  • Costing issue-Why Info record price is not read ?

    Hi,
    We have an issue while costing a Material procured externally.
    Valuation Variant >>> Priority 1-Info record price. >>Priority 2-Material Master valuation price.
    However, system is picking the price matained in the Material master.
    I have verified the validity of the info record and the Blocks on the Vendor and seems ok.
    Are there any specific checks need to carry out to know if the info record is a valid one.
    Any idea why system is picking Price from Material Master?
    Your help is appreciated.
    Kind Regards
    Umapathi G

    HI Umapathi
    Does any scheduling agreement exists for this info record
    refer this link.. This issue is pretty common these days and has been discussed many times in the forum
    CK11N- Material cost estimate with & without agreement
    Regards
    Ajay M

  • Adopted Info record price should not be changed in PO

    Dear All
    I do have a requirement that, my company wants to maintain info records for each vendor price combination, and wants user should not change adopted prices/conditions etc in PO while creating the PO.
    Can this be possible without doing any ABAP coding using BADI?
    Thank you

    HI,
    Its possible by MM configuration in Condition type ( PBXX or PB00).
    What u want to do is In the conition type T.Code :M/06
    Under the Changes wich can be made tab, thaer is
    Manual entries  , Plz give' D'     in the tab , that means manual entries not possible.
    Hope it clear,
    Regards,
    Andra

  • Moving Avg Price is not updating in material master even after PO GR

    Dear Gurus,
    All of the materials in our company won't update the MAP even after the goods movement, and the Price control is set as 'V'.
    Can anybody give me the idea how to track the IMG setting?
    Jamie

    Check the Mat type
    Check Qty , value update is active .
    Please give the above details
    MAP works as below- Is your understanding correct ?. From then current stock position and Inv value , When you do GR for 30 qty at  $300 / EA. MAP is moved from 300 to 301
    Item
    Qty
    MAP
    Stock Value
    Current
           1,000
              300
           300,000
    GR done for 30 Qty with price 330/Ea
           1,030
              301
           309,900

  • Catlog item price is not updated after pubishing catalog sucessfully

    Hi,
    Hi All,
    Our user has updated catalog item price for sullplier and published successfully long ago, but when ever user creating Shopping cart fro that catalog then item price is still showing old price instead of new price.
    Request you to any one advice me, how to solve this issue?
    Many Tnaks,
    Venkat

    is the TREX running ??
    In your SRM system go to transaction SM59 and under TCP/IP-Connections search for destination called
    TREXDEFAULT_REG, double-click on it and click on connection test button (your destination might have a different name).
    Please check following table entries.
    /CCM/D_CTLG_REQ SE
    /CCM/D_IDX_META inactive index
    /CCM/D_IDX_CHAR any entries for inactive index ?
    are u publshing the entire master catalog ?? or part of it ??
    thanks
    -Adrivit

Maybe you are looking for