Configuration archive after configuration change

Hello,
I'm assuming this can work with switches, routers, and controllers. I'm running PI 2.1 and am trying to get the configuration archive functionality working. I have both of these options checked under System Settings > Configuration Archive:
:: Archive configuration out-of-box
:: Archive configuration on receiving configuration change events
On the IOS device, these settings were configured for syslog/snmp:
logging buffered 100000
 no logging event link-status
logging trap notifications
logging facility local6
logging source-interface Loopback0
logging <Prime IP>
snmp-server community ***** RW 13
snmp-server enable traps config
snmp-server enable traps syslog
snmp-server host <Prime IP> version 2c *****
I do not see any syslog messages in PI under alarms/alerts and the configuration never gets archived. I haven't run tcpdump yet to determine if PI is receiving these traps but I was hoping it was something simple I was overlooking. Thanks for any assistance that can be provided.

Thank you for the reply. To answer your question, yes. Community information matches with PI credentials.
I actually did get it to work yesterday. I did original testing on a 1921 router which is still not working, but when I tried configuring the same information on some switches (3750's) it worked. I thought routers would be configured the same - are there hardware limitations to this?
I look in the built-in CLI template 'Configure Logging' in PI and it only has switches and WLCs as available devices to push out to but I don't know what to make of it.

Similar Messages

  • How to load the boot menu using the command line , after the configuration change ?

    how to load the boot menu using the command line , after the configuration change ?

    Hi @Bask-48 
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp you are trying to change the boot order.  Here is a link to Configuring the Boot Order in the System BIOS
    that will assist you.
    Good Luck and Happy Holidays!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • X121e bios loop : "configuration changed - restart the system"

    After changing some settings in BIOS i got stuck in a reboot - loop.
    * Cannot access the BIOS any more - pressing F1 changes the message to "Entering BIOS Setup Utility" followed by the message "configuration changed - restart the system"
    * F12 changes the message to "Preparing Boot Device List" followed by  "configuration changed - restart the system" and the system reboots again.
    * Tried to remove the battery, pressing the power button for 10-15 sec. and reboot with AC Adapter connected
    * Tried to remove the battery and unplug the bios battery for 3 days the reset the bios - doesn't work
    * Tried to boot via USB (BIOS update, FreeDOS with BIOS update, Ubuntu-Live-USB) - nothing worked .. didn't change the boot-order - i always prefer USB boot
    * Removing hard-disk produces the message "no operating system found"
    Are there any tricks for resetting the BIOS to defaults, flashing BIOS without booting from USB?
    see
    * http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/E-325-bios-settings-changed-keeps-rebooting/td-p/...
    * http://forums.lenovo.com/t5/X-Serie-ThinkPad-Notebooks-inkl/x121e-Configuration-changed-Restart-Syst...
    - there are several people with this issue ...

    In service center they said that motherboard is glitchy and needs replacement.
    So it was a hardware fault.

  • Configuration changes in long cycle orders

    Hi,
    We are currently working on with ETO client and have a scenario where Orders are configured using guided selling which triggers multiple child models as required. Each of these child models are connected to each other but can be manufactured and shipped separately. Order life cycle could range from 2 month to one year and changes are quite frequent. We would like to know the best practices we can adopt in configurator change management after booking in such large BOMs?
    Thanks
    Greg

    Hi,
    The code looks fine. To check whether the role still gets shutdown or not, you can handle the role's Stopping event, and write some messages to, say, table storage. Then if you see the message in table storage, it means the role has been restarted. Also please
    try to write some messages in the Changing event to check whether your event handler is called.
    Best Regards,
    Ming Xu
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Is there a way to restart my Java cloud service? What are "non-dynamic configuration changes"?

    I am trying to deploy an ADF application to my trial instance of Java cloud, I am getting the following error:
    2013-10-15 08:24:18 CDT: Deploy Application started
    2013-10-15 08:24:19 CDT: weblogic.management.DeploymentException: [Deployer:149189]An attempt was made to execute the 'deploy' operation on an application named 'xyzAPP' that is not currently available. The application may have been created after non-dynamic configuration changes were activated. If so, the operation can not be performed until server is restarted so that the application will be available.
    2013-10-15 08:24:19 CDT: WL action state: failed
    2013-10-15 08:24:19 CDT: Action FAILED with WL action state: failed
    2013-10-15 08:24:19 CDT: Check the server log of your Java cloud service for more info about the failure.
    There are tutorials available for deploying your first ADF app to the cloud, which I followed carefully. Except for one thing, the ADF app was originally developed in Jdeveloper 11.1.2.4 and then migrated to 11.1.1.6. Could that be what is causing the problem? How can I try to troubleshoot this?

    Hi,
    You will have to raise an sr towards the hosting team to perform the restart.
    Kind regards,
    Flori

  • [TP x120e] Continuous "Configuration changed - Restart the system." error

    I played with my bios (disabled/enabled mic, webcam, LAN and so), but after exiting the bios, Thinkpad x120e  reboots continuously with the error message "Configuration changed - Restart the system.". I was not able to boot from any USB/HDD and also I can not enter to the BIOS. Hard bios reset won't help. Any ideas?
    Thanks!

    Hello,
    Have you tried unplugging all power, including the internal CMOS/RTC backup battery, from the ThinkPad X120e, leading the unit alone for a few minutes to let any capacitors holding a residual electic charge drain, holding down the power button for 30 seconds to complete the operation, then plugging in the AC charger without either of the batteries installed, then holding down the F1 key while pressing the power button to see if that gets you into the BIOS settings?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • STMS Configuration - Change Virtual System with Real System

    Dear all,
    My system, if I go in the transaction STMS in DEV system, was configureted in the following way:
    DEV => QA => PROD (Virtual System)
    Now, I want to change the PROD Virtual System in PROD Real System.
    How Can procede?
    Can you explain step-by-step the process?
    Because the system was configureted from other people, and I'm new to using the STMS.
    Thanks in advanced for your help.
    Best Regards,
    Giulio

    Hi,
    After the planned system is physically installed it is time to replace the Virtual System with the realized system.
    The procedure for the same is as under:
    1) Delete the Virtual System from the transport domain
    . Login into Transport Domain system client 000
    · Using STMS got to Overview=> Systems
    · Chose SAP Virtual System=> Delete (confirm)
    · Distribute configuration change.
    As soon as the configuration change is distributed, the virtual system is deleted. The import queue for this system in TMS disappears but it is available as import buffer at the operating systems level.
    Now add the new (physical system) to the transport domain:
    If STMS is configured as standalone system then first delete STMS configuration on PRD system
    login into PRD system client 000. (delete STMS configuration if present.)
    run stms -> it's ask for set up STMS -> click on other configurition (F6)
    Target Host -> host name of domain controller ( host name of transport domain system)
    System number -> Instance number of domain controller ( instance number of transport domain system)
    Now,
    Go to the Transport Domain Controller and accept the system. (As the import buffer is available at the    operating system level, no change requests will be lost)
    Distribute the configuration changes.
    regards,
    kaushal

  • Please ensure that the applicationhost.config file is correct and recommit the last configuration changes made

    I am receiving event ID 5189 on Server 2008 R2, IIS 7.5.  I experience this error across a number of servers, each of which is running only the default web site, but have 600+ applications running on the default web site.  Each application
    has its own application pool.  My point is, the applicationhost.config is rather large.
    I have seen a number of posts on this error message, but my issue itself seems to differ somewhat.  I am aware of a similar post: http://social.technet.microsoft.com/Forums/en-US/3128ee93-1319-4cc2-9257-003512caf476/event-id-5189-microsoftwindowswas?forum=exchangesvrgeneral
    which points to KB http://technet.microsoft.com/en-us/library/cc734988%28v=ws.10%29.aspx
    However, in my case, it doesn't seem that the extreme measures for this resolution are required.  The error usually indicates a corrupted applicationhost.config that must be manually fixed, or otherwise the WAS service needs to be restarted, or the
    server itself, etc.
    In my case, the issue can usually be fixed by an application pool recycle, or at worst a stop/start.  I have an application which is sensitive to recycles, and so we do not have periodic recycle events configured for this application, which is the bulk
    of the applications on the servers.  It seems to me that this issue is usually caused by the application being in use when there is an applicationhost.config change.
    For instance, we have one application that we deploy using msdeploy.  We found that when we ran an installation for this application via msdeploy, we were receiving this event, and we would subsequently get 500 errors in the application (sometimes the
    application pool corresponds to that which is identified in the event log, sometimes it doesn't).    It seems like applications that were being hit at the time the applicationhost.config was modified by msdeploy were affected.  In an attempt
    to correct this, we moved from msdeploy to a batch file containing appcmd commands.  This also did not resolve the issue.
    I have another application which is installed using PowerShell commandlets.  We started to notice that this script also caused the issue to occur on occasion.  As I continued to identify different processes that resulted in the same issue, I came
    to the conclusion that this is likely due to any change in the applicationhost.config.  I assume the issue is that the applicationhost.config is modified during a read operation to the file by the application pool, or WAS service, and that the recycle
    event, which corrects the issue, forces a re-read of the applicationhost.config, resolving the bad-read issue.
    Has anyone else experienced this, or do you have any recommendations?  My current work-around is to not install any applications during peak hours, and performing an IISRESET after installs are completed, to ensure application stability.
    Message              : The Windows Process Activation Service failed to generate an application pool config file for application pool 'myAppPool'. The error type is '7'. To resolve this issue,
    please ensure that the applicationhost.config file is correct and recommit the last configuration changes made. The data field contains the error number.
    Id                   : 5189
    Version              : 0
    Qualifiers           : 49152
    Level                : 2
    Task                 : 0
    Opcode               : 0
    Keywords             : 36028797018963968
    RecordId             : 324108
    ProviderName         : Microsoft-Windows-WAS
    ProviderId           : 524b5d04-133c-4a62-8362-64e8edb9ce40
    LogName              : System
    ProcessId            : 0
    ThreadId             : 0
    MachineName          : MyComputer
    TimeCreated          : 3/3/2014 9:03:24 PM
    ContainerLog         : system
    MatchedQueryIds      : {}
    Bookmark             : System.Diagnostics.Eventing.Reader.EventBookmark
    LevelDisplayName     : Error
    KeywordsDisplayNames : {Classic}
    Properties           : {System.Diagnostics.Eventing.Reader.EventProperty, System.Diagnostics.Eventing.Reader.EventProperty, System.Diagnostics.Eventing.Reader.EventProperty}

    As an update to this issue, after doing some research, it appears the behavior is related to a new feature in IIS7 called Application Pool Isolation (http://technet.microsoft.com/en-us/library/dd163536.aspx).
    This new feature prevents cross-application spillage by isolating the configuration for each application pool in IIS.  So in reality, an application pool never actually reads the applicationhost.config - that is just a master file, and each time it
    is update, it triggers a change to the individual application pool configuration files, located in C:\inetpub\temp\apppools.
    We did try setting Advanced Settings > Disable Recycling for Configuration Change to true, but after an IIS reset we were still able to reproduce the issue - worse actually, because in our test program, which continually hits the web
    service, and also continually makes apphost.config changes, when the two events collide, the 500.19 issue precipitates; but after an additional change to the apphost.config, it seems that the additional changes will actually correct the issue (seemingly forcing
    another recycle, which is also how we resolve the issue manually); after making this setting adjustment, once the 500.19 issue precipitates, additional changes to the apphost.config does not correct the problem, only a manual recycle corrects it.  This
    is the recycling.disallowRotationOnConfigChange property of the app pool.  We also set the setting for recycling.disallowOverlappingRotation to True as well, with the same result.
    We ARE able to prevent this issue by setting the C:\inetpub\temp\apppools\myapppool\myapppool.config to read-only, but for obvious reasons, this is not a desired work-around.
    It seems like what is happening is that any change to the ApplicationHost.config is resulting in each of the C:\inetpub\temp\apppools temp application pool config files being updated as well, in addition to triggering an application pool recycle.  It
    seems to me the desired behavior would be that these files are only updated if the applicationhost.config changes are specific to that application pool - but that doesn't seem to be the behavior.
    After turning on failed request tracing, I was able to narrow the error down more:
    ModuleName
    AnonymousAuthenticationModule
    Notification
    2
    HttpStatus
    500
    HttpReason
    Internal Server Error
    HttpSubStatus
    19
    ErrorCode
    2147942413
    ConfigExceptionInfo
    \\?\C:\inetpub\application\application\web.config ( 9) :Failed to decrypt attribute 'password'
    Notification
    AUTHENTICATE_REQUEST
    ErrorCode
    The data is invalid. (0x8007000d)
    This seems to be pretty static.  Trying to look into possible causes of this issue.

  • Log configuration changes to syslog on Nexus 7000?

    I need to be able to log any configuration changes to syslog on our Nexus switches. On IOS this is easy with the archive commands, but I'm a little stuck trying to do this on our Nexus gear. On the IOS gear I run the commands:
    archive
    log config
    logging enable
    logging size 100
    hidekeys
    notify syslog
    How do I do the equivalent on NX-OS?

    ​Cisco NX-OS can log configuration change events along with the individual changes when AAA command accounting is enabled.
    With command accounting enabled, all CLI commands entered, including configuration commands, are logged to the configured AAA server. Using this information, a forensic trail for configuration change events along with the individual commands entered for those changes can be recorded and reviewed.
    Because of this capability, it is strongly advised that AAA command accounting be enabled and configured.
    Refer to the “TACACS+ Command Accounting” section of this document for more information.
    The Nexus 7000, by default keeps a local accounting log of all the configuration commands entered on the device; you can view this with the 'show accounting log' command.
    In NX-OS, we changed the way logging works.  We keep a local accounting log of all the
    configuration changes ("show accounting log"), but if you want to send those logs to a
    server, it must be done with through a TACACS server.  Please see the below documentation:
    Configuring AAA on Nexus
    TACACS command accounting
    -Thanks
    Vinod
    **Encourage Contributors. RATE Them.**

  • Configuration Changes Post Installation

    Hi All,
    Can someone in the group tell me how is the below scenario handled in other projects involving OM/Configurator/Service modules:
    Status: Star item created > Manufactured > Shipped and Installed at customer site
    Situation: Customer calls-in and request for some configuration changes. For e.g. a battery of 6v needs to be upgraded to battery of 12v.
    We have a requirement to keep a track of such changes made to the configuration after the configured item is shipped and installed at the customer site.
    Thanks,
    Nitin

    Hi All,
    Can someone in the group tell me how is the below scenario handled in other projects involving OM/Configurator/Service modules:
    Status: Star item created > Manufactured > Shipped and Installed at customer site
    Situation: Customer calls-in and request for some configuration changes. For e.g. a battery of 6v needs to be upgraded to battery of 12v.
    We have a requirement to keep a track of such changes made to the configuration after the configured item is shipped and installed at the customer site.
    Thanks,
    Nitin

  • Schedule WLAN configuration changes using CPI

    I need to make some configuration changes to a WLAN on our controllers after hours, yet I cant figure out how to do it.  The controllers are running v 7.3.101.0 (5508s & 2504s), CPI is version 1.3
    When I go to Configure > Scheduled Configuration Tasks > WLAN Configuration I get the following message
    No saved task exists.  You can schedule WLAN task for required Controller from " Configure > Controllers > COntroller IP > WLANs > Wlan configuration" page. 
    When I go there I dont see any options to schedule a change.  When I make configuration changes to a WLAN and click save I get a warning messages that leads me to believe that the changes will be effective immediately. 
    Am I missing something?

    Please go to the below link and and see Configuring Scheduled Configuration Tasks. It will help you.
    http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/configuration/guide/ctrlcfg.html#wp1098517

  • Internal Order type - Configuration change

    Hi
    I have created an Internal Order type in January and we have create internal orders under that order type in our production server and have used those as well.
    I want to remove the revenue posting tick which has been allowed in this order type which was done at the time when the order type was created.
    If I remove the revenue posting setting now, do i need to replace the internal orders which has been created under that order type with new ones after the configuration change? OR will the entries posted earlier (before the configuration change) work according to the old order type settings and will the order work according to the new settings after the change date?
    Thanks
    Trishan

    Hi,
    Don't you know if there is any program that updates the old order master data, according to posterior changes in the order type?
    Thanks. Best regards,
    Cátia

  • AUDIT CONFIGURATION CHANGED : SLOT INACTIVE

    Hello ,
    We've configured security autid via parameters below :
    rsau/max_diskspace/per_day:     1996800K
    rsau/max_diskspace/local          2048000K    
    rsau/max_diskspace/per_file      665600K
    rsau/enable                               1              
    rsau/selection_slots                     30    
    rsau/local/file D:\usr\sap\FKP\DVEBMGS00\log\++++++++.AUD
    FN_AUDIT ++++++++######.AUD
    DIR_AUDIT D:\usr\sap\FKP\DVEBMGS00\log           
    In our production system and we repaired security audit screens with abap consultants . Then  we could activate audit log for 30 slots . It works very well . We restarted system several times and we didn't get any problem about security configuration .
    After a few months  , we restarted the system and the slots which we add later changed to inactive .You can see  SM20 logs below :
    Application Server Stopped
    Application Server Started
    Audit Configuration Changed
    Audit: Slot 1: Class 191, Severity 2, User USER1, Client 200,
    Audit: Slot 2: Class 191, Severity 2, User USER2 , Client 200,
    Audit: Slot 3: Class 191, Severity 2, User USER3, Client 200,
    Audit: Slot 4: Class 191, Severity 2, User USER4, Client 200,
    Audit: Slot 5: Class 191, Severity 2, User USER5, Client 200,
    Audit: Slot 6: Class 191, Severity 2, User USER6, Client 200,
    Audit: Slot 7: Class 191, Severity 2, User USER7, Client *,
    Audit: Slot 8: Class 191, Severity 2, User USER8, Client *,
    Audit: Slot 9: Class 191, Severity 2, User USER9, Client *,
    Audit: Slot 10: Class 191, Severity 2, User USER10, Client *,
    Audit: Slot 11 Inactive
    Audit: Slot 12 Inactive
    Audit: Slot 13 Inactive
    Audit: Slot 14 Inactive
    Audit: Slot 15 Inactive
    Audit: Slot 16 Inactive
    Audit: Slot 17 Inactive
    Audit: Slot 18 Inactive
    Audit: Slot 19 Inactive
    Audit: Slot 20 Inactive
    Audit: Slot 21 Inactive
    Audit: Slot 22 Inactive
    Audit: Slot 23 Inactive
    Audit: Slot 24 Inactive
    Audit: Slot 25 Inactive
    Audit: Slot 26 Inactive
    Audit: Slot 27 Inactive
    Audit: Slot 28 Inactive
    Audit: Slot 29 Inactive
    Audit: Slot 30 Inactive
    We didn't change any parameters or audit configuration before restart   but as I said , after restart audit configuration has changed.
    Does anyone has an idea about why audit configuration has changed  ?
    Thanks & Regards
    Ozlem Otunctemur

    Özlem Ötünçtemur wrote:
    rsau/selection_slots                     30    
    ... we repaired security audit screens with abap consultants .
    Have you considered that these ABAP consultants might have made a mess?
    The selection slots does not support more than 12 tabs and thankfully your ABAP consultants can't "repair" the SAP kernel which writes the log.
    You should read SAP Note # 7 in this case and ask SAP for assistance.
    Cheers,
    Julius

  • ACS Applying configuration changes failed

    Hello
    I have a problem with ACS version 5.1.0.44.6. running on 1120 appliance.
    After making some changes to authorization rules of Device Admin access services, I can no loger access authorization page for Device admin access services. Error on Access Policies page is: . This System Faliure occurred: {0}. Your changes have not been saved. Click OK to return to the list page.
    Logs recorded this:
    Severity         
    FATAL
    Message                                                                                                           
    Applaying configuration changes failed 
    Category
    CSOacs_Internal_Opreations_Diagnostics
    Code
    31102 
    Details
    LastErrorMessage=Policy DB problem: Policy value type is not supported. ConfigTransactionID=2968
    After this we can no longer authenticate on any device with TACACS+. Telnet from switch to the ACS server on port 49 returns  % Connection refused by remote host. RADIUS authentication and authorization for VPN users on same server is working fine.
    Do you have any idea how to solve this problem?
    Hrvoje

    Thanks for the screenshot! 
    It appeared to be an issue in StatusMonitor that I also could reproduce: we don’t work correctly with the structure when virtual directories and applications are mixed, i.e. due to this bug we cannot find web application if it’s under the virtual directory,
    that’s under the web site.
    I.e. app named WebSite/Dir/App1 cannot be found by SM during adding application insights:
    WebSite
       ---> Dir (virtual directory)
              ---> App1 (web application)
    We'll triage this bug and address in one of the nearest StatusMonitor updates.
    Thanks for finding this issue!

  • 1532E MAP disassociating - Cause=Radio reset due to configuration change.

    Hello,
    have a1532E MAP with WLC 2504 and 7.6.100.0 that shows oddly enough "Cause=Radio reset due to configuration change" and the interface resets.
    Any idea how this comes about without any changes made.
    Relevant log attached.

    After updating to 7.6.120 we've noticed that some of our AP's wouldn't  come up. After looking in the switch's logs I found this
    chassis: Ports  PoE usage has exceeded threshold of 80%.
    The power drawn is 117w (show power-over-ethernet). 
    When I use the following command: show power-over-ethernet brief I get this:
      PoE   | Power  Power    Alloc Alloc Actual Configured  Detection   Power Pre-std
      Port  | Enable Priority By    Power Power  Type        Status      Class Detect
      ----- + ------ -------- ----- ----- ------ ----------- ----------- ----- ------
      1     | Yes    low      lldp  17 W  7.0 W              Delivering  3     off
      2     | Yes    low      lldp  17 W  7.0 W              Delivering  3     off
      3     | Yes    low      lldp  17 W  6.8 W              Delivering  3     off
      4     | Yes    low      lldp  17 W  7.1 W              Delivering  3     off
      5     | Yes    low      lldp  17 W  7.0 W              Delivering  3     off
      6     | Yes    low      lldp  17 W  6.9 W              Delivering  3     off
      7     | Yes    low      lldp  17 W  6.8 W              Delivering  3     off
      8     | Yes    low      lldp  17 W  6.7 W              Delivering  3     off
      9     | Yes    low      lldp  17 W  6.9 W              Delivering  3     off
      10    | Yes    low      usage 17 W  0.0 W              Disabled    3     off
    Port 10 is where the missing AP is on. 
    How is it possible that after the update to 7.6.120 the AP won't work anymore?

Maybe you are looking for