Configure Role of Business System " as Central Integration Server , PI
Hi Experts,
I am running transaction code IDX5 in my xi system it is showing as "system is not a central integration server unable to start the program ".In SXMB_ADM role of business system need to configured .If we need to configure how to do this .
Regards
Praveen
Hi Praveen,
For configuration of integration server please go to SXMB_ADM>In configuration choose Integration engine configuration->And add one runtime parameter IS_URL...and specify the role of business system as Integration server and specify the corresponding Integration server i.e dest://httpdestination. This destination is RFC destination that should be created in PI sytem of type 'H 'which contains the target host as host name of PI system and path prefix as '/sap/xi/engine?type=entry'.
Thanks & Regards,
Priyanka Anagani
Similar Messages
-
Problem by Maintaining a Business System for the Integration Server
Hi to all,
I have the following problem. I tried to change some Business systems configuration in SLD but accidentally deleted defined Business System for our Integration Server. After that I tried to create that business system again but I have the following error:
Integration Server already defined. There is already an integration server defined for the selected technical system. Please select role Application System.
Since than Im receiving the following error message when I try to refresh my adapter engine cache:
com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element
Do you know how can I define the Business System again currently I can't see it in SLD Business systems?
Ive also checked the IS URL (TR: SXMB_MONI) and it seems that its ok.
Regards
NaychoHi Naycho,
i think you have to clean up some sld rubbish
Go to SLD / Administration / Content Maintenance. Choose left side "all classes" or "landscape description" and right side "business system". Delete all entries you find for your business system, after that try to recreate it.
Regards,
Udo -
SLD: recreate deleted Business System of type Integration Server
Hi,
accidentally i deletet the business system of type "Integration Server" in the SLD. And i can't recreate it. It always says:
"Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
Any ideas to create such a business system?
The old one isn't there in the list, after i deleted it.
regards,
msHi,
If you change/delete the host name of the Integration Server after the installation in either the SLD or the exchange profile, you must adjust it accordingly in the exchange profile or the SLD, respectively
Maintaining a Business System for the Integration Server
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
Regarding Integration server in Business System
Regarding Integration server in Business System
Refer editing the Business System
http://help.sap.com/saphelp_nw04/helpdata/en/59/2cb3a3c93a4c7086500b8345143418/frameset.htm
Thanks
Swarup
Edited by: Swarup Sawant on Jul 7, 2008 2:03 PM -
Connect one Business system with two Integration Server
Hello,
Can we able to connect one Business System with two Integration Server?
I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
Is this possible ?Is there any work around solution there?
Thanks.Hello ,
This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14 .
I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14 ?
Thanks.
Lakshmi
Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM -
Business System of type Integration Server In SLD .
Hi
Can anybody tell what is the criteria on which we decide whether a business system to be created in the sld should be of type Integration Server or Application System .
And also can we have only one Business system of the type integration server in the sld ?
Can anyone please explain the concept behind this.
Thanks
Nilesh.
Edited by: Nilesh Taunk on Jun 19, 2008 7:24 AMhi,
steps to create a business system
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
If there is no business system for integration server, that means the post installation steps are not completed or someone messed with the business system for integration server.
To define a business system, follow post installation steps from install guide.
http://service.sap.com/instguides
SAP NetWeaver -> Release 04 -> Installation -> SAP XI -> Installation Guide - SAP Exchange Infrastructure 3.0 SR1 follow page 38
If you do not have integration server, that means your XI will not work.
Thanks,
Vijaya -
No role for business system defined in SXMS_CONF_ITEMS
Hi Experts.
I have the following problem. We were set up the XI in our company and now we are trying to configure and run it propertly. We had some problems so far and now there is the next one: I configured the simple scenario FILE-XI-FILE but it doesn't work <b>:(</b>. Every step from the scenario was completed successfully (after some problems) but when I have started runtime Workbench (RWB) in order to monitor the functionality of XI and I choosed <b>Component Monitoring | Components | Integration Server | Integration Engine GPI</b> I see that I have an error in Self-Test Status | <b>Are roles in SXML_CONF_ITEMS and SLD consistent</b>? In detail it's <b>No role for business system defined in SXMS_CONF_ITEMS</b>. My business and technical systems look to be well configured but now I'm hopeless because I can't find nothing more specific about <b>SXMS_CONF_ITEMS</b> table. I tried some notes and threads from the forum but nothing helped me after all. So please help if someone has an experience with something similar. Any help will be appreciated. Thanks
OndrejHi,
The role of a business system is defined centrally in the SLD. However, you can overwrite this setting locally in the table SXMS_CONF_ITEMS.
This test checks whether the role descriptions are consistent. If not, the locally defined role is used at runtime.
Check in transaction SXMB_ADM -> integration engine configuration a parameter (Corresponding Integ. Server) if all parameters are correct n not lost.
refer : http://help.sap.com/saphelp_nw04/helpdata/en/a5/1b5342d8a7be30e10000000a155106/content.htm
Runtime Workbench - Integration Engine
http://help.sap.com/saphelp_nw04s/helpdata/en/70/58b43be7492354e10000000a114084/frameset.htm
Regards
Aashish Sinha
PS : reward points if helpful -
Role for business system defined in SXMS_CONF_ITEMS'
hi
in RWB integration engine status is red in detail it is showing.
'No role for business system defined in SXMS_CONF_ITEMS'.
how can i fix this.
regards,
krushiHI
Runtime Workbench - Integration Engine
Are the Roles in SXMS_CONF_ITEMS and the SLD Consistent?
//***The role of a business system is defined centrally in the SLD. However, you can overwrite this setting locally in the table SXMS_CONF_ITEMS.
This test checks whether the role descriptions are consistent. If not, the locally defined role is used at runtime.
extract taken from this thread
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/1b5342d8a7be30e10000000a155106/frameset.htm
Message was edited by:
Anusha Ramsiva -
Configuration URL in Business system
Hi Experts,
Question 1
I am creating Business system for ecc of type Web as ABAP in PI 7.3 and in second step i have provided all technical system details and there is field called configuration URL. What information I ahve to fill here. When i clicked on Info button it displayed the following content
" URL of the selected technical system. This can be any application server or web dispatcher URL.
It is used to distribute central web service configuration data to the backend system.http://HOST:PORT"
Please tell me where can I find this URL.
Question 2.
We upgraded the XI 3.0 to PI 7.3 system. We already have existing SAP system(ECC, APO, CRM Etc.). I am trying to change the Related Integration Server of Business systems of Type Web as ABAP to another Related Integration Server, the system is throwing below error.
This error is throwned because we have not maintained Configuration URL in Business system.
Please let me know how to over come this problem.
java.lang.NullPointerException: while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'url' at com.sap.sld.wd.businesssystem.BusinessSystemDetailView.saveConfigURL(BusinessSystemDetailView.java:1338) at com.sap.sld.wd.businesssystem.BusinessSystemDetailView.onActionSaveIntegration(BusinessSystemDetailView.java:814) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystemDetailView.wdInvokeEventHandler(InternalBusinessSystemDetailView.java:812) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:142) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:75) at
Thanks In advanceTry this one, port can be web dispatcher or of Central Instance
http://<Server>:<port>/sap/xi/engine?type=entry -
Registration of Business system for the Integration Engine Java in the SLD issue
Hi,
We have completed the installation of PI-AEX 7.4 SR1 then we ran the below wizards successfully.
- Configuration Wizard: PI-AEX initial setup
- Configuration Wizard: PI Self Test for AEX
However when we were Checking the AEX Configuration as per help.sap.com
Check the registration of a business system for the Integration Engine Java in the SLD:
Enter https://<host>:<port>/sld .
Choose Start of the navigation path Business System Next navigation step Integration Engine Java <SID> Next navigation step Integration End of the navigation path.
The pipeline URL must be: http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet?ximessage=true .
More information: SAP Note 1435392
for us the Pipeline URL is as below
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
and the rest " ?ximessage=true " is not there.
Also we ran the below wizard
Configuration Wizard: PI Self Test for AEX
and it finished successfully without any issue.
Any Suggestions what could be missing.
Thanks,
Regard
Ahmed MohammedHi,
I found the below SAPNOTE which confirms that the Pipeline URL should be
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
1564449 - PI CTC Wrong Pipeline Url after AEX Initial Setup
However on help.sap.com it is different.
Any one experienced the same ?
Regards
Ahmed Mohammed -
System Landscape : Corresponding Integration server not maintained
Hi Guys,
In ECC, SXMB_ADM - > Integration Engine Configuration
Edit ->Change Global Configuration data
System Landscape tab...
It shows System Landscape : Corresponding Integration server not maintained
I have maintained the corresponding integration server in the SLD where in the business I created for ECC,
I put the business system that I have created for Integration server
Yet The error persists...any idea?
Regards,
TejaHi Guys,
I have done all the setting suggested,,
then came across a thread on the forum
Unable to load Integration Server data from SLD
Regarding the System Landscape button in transaction sxmb_adm -> Integration Engine Configuration,
this button is obsolete and no longer works correctly. You can ignore the error message you get.
Thanks,
Teja -
Use PI as "Application System" instaed of "Integration Server"
All,
i have quite complicated scenario in which:
message is sent ECC > XI, this mesage triggered number of sub-interfaces XI>OraDB (via jdbc), each sub-interface activate DB stored procedure (which returns large data volumes). all returned data should be "re-packed" into IDocs which are submitted back to ECC.
I tried to encapsulate all "sub-interfaces" in a simple ECC->XI proxy interface generated coed, and implement the DB calls as XI>DB (Proxy2JDBC) interfaces. in order to enable these interfaces (for which the start point is XI) i had to change the XI (at sxmb_adm and SLD) to "Application System" instead of "Integration Server". at this point i re-tested my proxy interfaces ECC>XI and they were not working?
how can this be done?
any other possible solutions to the above scenario?
Regards'
uriuri karagila wrote:
All,
> i had to change the XI (at sxmb_adm and SLD) to "Application System" instead of "Integration Server". at this point i re-tested my proxy interfaces ECC-->XI and they were not working?
>
> how can this be done?
> any other possible solutions to the above scenario?
>
> Regards'
>
> uri
Does your sys. Admin is aware of what you are trying to do?
You better not....
Don't let your customer define the interface to you.
You are not just a SAP PI developer.
You should be looking at the whole business process and
tell the customer what is the best way to implement the interface.
And so, I believe this integration dilemma can be simplified.
Good luck. -
One business system and two FTP server locations
Hi,
We have one business system and two FTP server locations related to it. We have to send two different messages to this business system.
It has to be send to both the ftp server locations.
How do we configure the receiver determination and receiver agreements ?
Do we need two receiver Business systems for this?
How do we configure the receiver agreements especially?
Urgent
Regards,
Johnhi
1) you must create 2 CC, each one to one FTP server.
2) how you send diferent message to each FTP yo only have to define 2 Reveiver determination, and two Interface Determination.
3)one sender Agreement
4)2 receiver agreement.
take in mind you only have 1 BS you must create 2 receiver determination, else if have 2 one receiver would be enouhgt
Thanks
Rodrigo -
Role of business system in SLD
I am doing PI post configuration with Central SLD on solution manager.What should be the Role of the business system for solution manager?In sxmb_adm should I give this as application system? And what should be the corresponding integration server?
Hi,
it should be application and should be connected to PI as any other R3 application system. If you connect it ti PI, then enter the PI destination as explained in the PI configuration guide, section connection to other business systems.
If you are not using PI, then it is not relevant - you should leave both fields empty
regards,
jaime -
while creating a business system, the business system role can be given as an application system or integration server
what is the signifance of using it as an integration server and as application systemHi Harsh,
However it's not clear from documnetation
they mentioned that we can use INTEGRATION server in both the cases weather it's application sys. or other sys.
But i think while craeating it for R/3 sys. i.e. Wwe AS ABAP we use it as Integration server else as application system.
Check this link: point 8 and 9
http://help.sap.com/saphelp_nw2004s/helpdata/en/87/7277e8fba34421a45d97a41ec27381/frameset.htm
Sachin -
Business Systems and Related Integration Servers
Each Standalone Business System has a corresponding Related Integration Server.
Suppose I am Developing a scenario for a Business System in the development environment, I have a related XI Development Integration Server (call it XD1) then I want to transport the changes to the test environment. Since this business system is defined to only point to XD1 as the integration server, in the test environment I want it to use the Test Integration Server (call it XD2). But the Business SYstem is pointing to XD1 only!
What I am saying is: Given that one Business System only points to one Integration Server, do I need one Business System for Development (call it BS_DEV), and one for test (call it BS_TST)?
Kind Regards,
Tony.If you have only 1 sld and you want to move the XI objects from development(XIDEV) to Quality(XIQA).
you will have to define the 2 business system groups and the related transport targets in the SLD..
1st transport group XIDEV --
BS_DEV will have XIDEV as the integration server.
2nd transport group XIQA --
BS_QA will have XIQA as the integration server.
So you will have to name the business system differently as DEV and QA
Some references
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/frameset.htm
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Cheer's
Maybe you are looking for
-
QM_Follow up action in usage decision
Dear QM Experts, 1. We can record the defects in inspection lot (01 origin) which creates quality notification in background under F2 type. 2. If the defects are recorded usage decision is given as Rejected. Requirement is auto email should b
-
Ilustrator freezes creating a new document with web profile.
Hi, I have the illustrator instalation from creative cloud subscription and everytime i create a new document and on the profile combo choose "web", the illustrator freezes forever. Im using mac version in a macbook pro 13" corei7 with 8gigs ram.
-
How can I turn off other languages on my ipad the next generation running ios7? I have the international language set to English but it's showing a foreign language and sometimes it shows the foreign language with English. Thank you.
-
Function return type could be sequence?
I tried to write a function return a sequence, but netbeans don't allow it. is it possible? if not, how can I solve it?
-
How can you delete an unwanted ios upgrade download?
I had a terrible time downgrading (lost a few things in the process) to iOs6 last night and now, like a virus, ios7 seems to have crept back in. Unwanted! Anyone knows how to delete this waste of a gigabyte from the iphone? It shows up already as "do