Cost center creation prefix with 0000000(zeros)

Hi All
Is there any way to creat cost center prefix with 0000(Zeros).I have created cost center called 0000012345 and when i saved this data 0000 were discapperd.Is there any way to create cost center with prefix Zeros(0000000)

Hi Praneeth
Thanks for your reply, i agree with you, but once i have done with above step which is explained from your screen, and i pressed enter,by defeault 0000 got disappered.Please see below screens
Screen 1:
Scree 2

Similar Messages

  • Adding cost center on OKB9 with cost element company code with valuation ar

    hi ,
    can anybody help me out with the Adding cost center on OKB9 with cost element company code with valuation area configuration.
    i have to do this configuration but do not know the detailed steps for that one.
    Good points will be awarded.

    Hi Prem
    Select the 1 in column acct assignment details column then in the left side in detail per business area/valuation area enter your valuation area.
    Thanks
    Ashok

  • Cost center Group associated with a Cost center

    Hi Experts ,
    I have a requirement , where I need to find the cost center group of given cost center.
    Is there any FM to do the same?
    I have Cost center in the Input and should get Cost Center group associated with it.
    Thanks !!

    BAPI_COSTCENTER_GETDETAIL

  • Error in cost center assessment integration with FI

    We just upgraded our test system with support pack SAPKH50020 and when we test cost center assessment, we are getting the error message "For document type SA, an entry is required in field Reference"
    The same process is working in our production system, which is under support pack SAPKH50010.  We are using the same doc type, and the configuration for this doc type is the same as in our test system. 
    OSS told us that the only solution is to change the doc type configuration or use a user exit to populate the Reference field.    However, I don't understand why this process is working in the old support pack and not in the new one.    
    Has anybody encountered the same issue?  If so, how was it resolved?  
    thank you,
    Lanny

    Hi Phaneendra,
    Thank you for your response.  But the real question is why is this process different between support pack SAPKH50010 and SAPKH50020.   In support pack SAPKH50010, we also uses document type SA with reference field required, but the cost center assessment is able to post to it without any customization.    Now, in support pack SAPKH50020, this no longer works.    So I'm just wondering if any of you have encountered similar issue after upgrading the support pack. 
    thanks
    Lanny

  • Cost Center Creation - Manual/LSMW

    Hi Experts .....
    We are trying to create the cost center data using the tcode PP02, in infotype 1001, subtype A 011. when the record is manually created, relevant cost centers are displayed in infotype 0001 (Organizational Assignment). But the same transaction, when run by an LSMW, infotype 0001 is not updated. However, in PO13, cost center relationship is created in both the cases.
    It would be great if some one can suggest the solution for uploading the cost centers for bulk data.

    Hi Kumar,
    Definitly it should work.
    Suppose if you are changing the CC for a position first it should delimit the dates and then is should add new CC to that posiiton.
    check the LSMW agian whether it is correct or not.
    OR, try to create the CC through PPOS_OLD and slece the position GOTO Account assignment.
    then Select the position GOTO master CC and give the CC which you want to use with dates. which intun updates the PP02 -- Position, CC relationship also. if you want you can check.
    let me know if you have probelm again.
    Reward me if helps,
    thanks,
    Vasu.

  • Cost Center Integrated Planning with GP12N

    We are using the New GL in 6.0.  I have made all of the Integrated Planning settings in the versions for both the GL Planning and the Cost Center Planning.  If I load the Cost Center Planning through KP06, the transfer works fine.  However, it was my understanding that you could load Cost Center Planning through GP12N, and see it in Cost Center reporting.  This does not seem to work.  Am I missing some particular setting?  We are loading into FAGLFLEXT.
    Thank you for any suggestions.

    Hi,
    - this is not going to happen; cost centre planning is flowing from CO to FI and not viceversa. the same apply if you run a cost centre allocation in accouting: it is not posting to CO.
    - you can use FI planning for accounts not managed as cost element and cost centre planning for the others.
    - as an alternative you can design cost centre reporting in accouting with transaction FGI0.
    Paolo

  • Change cost assignment (cost center) in confirmation with badi?

    Dear experts,
    for a certain request, we want to implement logic that will clear out the cost center when creating or saving the confirmation.
    We have tried the DOC_CHANGE BADI but this does not seem to do the trick. following code:
    LOOP AT acct_data into ls_acct_data.
        IF ls_acct_data-acc_cat EQ 'OR'.
          CLEAR ls_acct_data-cost_ctr.
        ENDIF.
        MODIFY acct_data from ls_acct_data.
    ENDLOOP.
    ET_ACC[] = acct_data
    Is my code wrong, or should i use another badi?
    Regards,
    Tom

    Hi,
    I have tried the following but does not seem to change anything:
    Loop at IT_ACC into ls_acct_data.
      If ls_acct_data-acc_cat EQ 'OR'.
        CLEAR ls_acct_data-cost_ctr.
      Endif.
      MODIFY it_acc from ls_acct_data transporting acc_cat.
      Endloop.
    Also with the following method, it is not changing the account assignment. I am in doubt that this badi could actually change the account assignment on confirmation?
    Loop at IT_ACC into ls_acct_data.
        If ls_acct_data-acc_cat EQ 'OR'.
          CLEAR ls_acct_data-cost_ctr.
          Append ls_acct_data TO lt_acc.
        Endif.
      Endloop.
      ET_ACC[] = lt_acc.
    Edited by: Tom Seminckx on Jan 20, 2009 1:18 PM

  • Cost center creation in Batch

    Hi All,
    I need to create lot of cost centers. Is there any way to create them in batch. If there is a way, please let me know step by step procedure for the same. Thanks in advance.
    Regaards,
    S.Sumana

    Hello,
    There is no readymade document for cost center.
    The logic is one and the same. You need to complete the following steps:
    Please take help from ABAPer.
    In recording you have to complete the following steps:
    Maintain Object Attributes
    Maintain Source Structures
    Maintain Source Fields
    Maintain Structure Relations
    Maintain Field Mapping and Conversion Rules
    Maintain Fixed Values, Translations, User-Defined Routines
    Specify Files
    Assign Files
    Read Data
    Display Read Data
    Convert Data
    Display Converted Data
    Create Batch Input Session
    Run Batch Input Session (Takes you to SM35)
    Please let me know if you need any further help.
    Regards,
    Ravi

  • Reg:Cost Center Creation?

    Hi all,
       I would like to capture the expenses incurred by vendor while transporting goods from plant location to customer location in one cost center.
    will any please let me know-
    what are all the config I have to do?
    plz starting from the Create Costcenter step by step?
    *points will be rewarded

    hi
    for Cost center seetings
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COALE/COALE_ALE_060.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COOMCCA/COOMCCA.pdf
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/13/05b3ae635611d2b43b006094b9c9b4/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/08/51457e43b511d182b30000e829fbfe/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/66/bc783643c211d182b30000e829fbfe/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/13/248f38c521853ae10000009b38f8cf/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/25/908fc66d8411d194f000a0c93031df/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/af/3f89c89e6711d395da00a0c929f4c9/frameset.htm

  • Sending mails when save button clicked on KS01 - Cost Center creation

    I Want to send a email to my officials when i entered the data and  click a saved button in KS01 after or before creating Cost Center..

    Hi Ravi,
    The package for ks01 is KBAS.
    In this u have exit COOMKS02 before saving.
    So write logic to send mail in the function module of this user exit which is triggered before saving.
    Regards,
    Vineesh.

  • COST CENTER CREATION

    CAN ANYONE TELL ME HOW TO CREATE A COST CENTER?

    Dear Raghu Shankar,
    Use T code KS01 for creating Cost center,Enter the cost center name,Controlling Area,valid From & To date and the Cost center
    category,Profit Center & save the data.
    Regards
    Mangalraj.S

  • SD data in cost center creation.

    Hi Gurus,
    I have got a request to create a cost center wherein the user has mentioned to create the SD data also. For which he has mentioned the Business Unit code.
    I need to understand what is created in this process and how. I have fair understanding that this is done to book all the costs of a particular BU to the new cost center created. But do not know the process of it.
    Please explain.
    Thanks,
    Tushar

    Hi,
    Cost centre's properties (fields) are fixed and cannot be changed/added. Please, specify your request...
    Regards,
    Eli

  • Force user to change cost center master data with validity date

    Dear All!
    we do have customer fields in table for cost centers (CSKS) and would like to force the user to do changes for these customer fields in combination with the change of the validity from/to date. I did not find any possibility to add this functionality with the customizing transaction OKEG or any other transaction. We now would need some good ideas from you as SAP experts!
    Regards,

    Hi,
    You can use COOMKS02 enhancement.
    Regards,
    Eli

  • LSMW Cost Center creation using BAPI BUS0012

    Hi
    I am creating a LSMW using BAPI BUS0012, I have done the setting for inbound Idoc Processing, but when i am clicking on maintain structure relations, i am getting an error No Target structure could be
    found
    please let me know what to do ?
    thanks in advance
    Lokesh

    Hi
    YOu can check http://help.sap.com/saphelp_nw04/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm
    Here you may get a answer to your question.
    Cheers,
    Hakim

  • Creation & Assignment of Cost Center?

    Hello Experts,
    I have done all the configuration in SAP HCM but I don't have any knowledge about Cost center.
    So please guide me how to create Cost Center? and with whom it should be assigned?
    Because at the time of hiring employee cost center is required in IT0001.
    Regards
    Rohit

    Hi Rohit,
    Create cost center via KS01.
    Assigning cost center to org unit or position is your company's decision.
    We are assigning cost centers to positions since our org units and cost centers are not totally in -line.
    Regards,
    Dilek

Maybe you are looking for