Cost of different alternative
Hi SAP gurus,
I have a product which contain 4 alternative.
Now I want to know which one is of low cost.
So every time I have to make one alternative active & then run CK11N transaction. (This is time consuming )
Is there any way through which I can easy get the Cost of different alternative in single transaction.
Best Regards,
Parag Save
Dear Parag,
I dont think it's required to keep 01 active status for the alternative BOM which is to costed and remaining BOM with 02 status.
Instead in CK11N,after entering the costing,variant,plant,material,click on the quantity structure tab page and here you can
directly assign the alternative BOM and routing or else production version for costing purpose.
Check and revert back.
Regards
Mangalraj.S
Similar Messages
-
Messg-AAPO189 :Account object Cost Center differs from that in asset master
At the time of Asset Acquisition in T-Code F-90 using Internal order, the system throws the following error:
Message-AAPO189 :Account object Cost Center differs from that in asset master
But in Asset Master data and Internal Order Master data's Cost Centers are same.
And we are not facing this problem for all Assets (only for few asset class only we are facing this error).
Please guide on this.
Note:
We are not using Joint Venture Accounting.
Regards
JS
Edited by: JS on Aug 12, 2009 7:14 PMClosed
-
Hi Expert,
The actual cost showing different in two report cji3 & cn41.Plz help me.
ThanksI did whatever you have suggested me.but i have not found desired result.
scenario is- In cn41 report
suppose the actual cost in wbs is 6649095
But under this network & activity level the actual cost is 6461522
In cji3 report at network activity level the actual cost is 6461522 & the actual cost of wbs is also 6461522
Plz guide me why cn41 report showing different actual cost at wbs level.
regards -
Report for cost centers with alternative chart of account
Hi.
I try to make a report in cost center accounting and in profit center accounting with alternative chart of accounts. We have primary chart of account for 20 companies and alternative chart of account for 1 company. How can I make a report in CO-OM and PC accounting with alternative accouns? Is there any metod? Are on the intrenet somewhere instructions?
ThanksMarko,
CCA reports are possible only by cost elements (which an have different description from a GL account).
PCA reports are possible only for main account (alternative account not available in GLPCT table). -
Unplanned delivery cost for different Vendor
Hi,
For a import PO we need to pay OCTOI to Municipal corporation.
Unfortunately while PO creation the octroi condition was not entered.
Now we need to post a invoice for this and the condition is, we must post this to material.
We dont want to do direct FI entry as then this will not load on material.
Entring Unplanned delivery cost at the time of invoice will not be possible is the Vendor is different.
Any suggestions please...
RajeshDear Rajesh,
unplanned delivery cost is basically which not plan at the time of PO and it will be expected at the time of invoice.
you can enter extra amount in unplanned delivery cost, but check at the time of Stimulate which a/c is being captured.
The Unplanned Delivery cost is default in separate GL or in Stock Account depends upon the configuration.
check In SPRO ,Maintain settings as shown
MM---> Logistic Invoice Verification -->Incoming Invoice --> Configure How unplanned delivery costs are posted
Please check the below link for more information
http://www.sap-img.com/financial/unplanned-and-plan-delivery-costs-in-stock-and-gl-account.htm
Unplanned delivery costs in MIRO
Regards,
PK. -
Post unplanned delivery cost to different freight G/L Accounts
Hi,
Regarding the freight costs the business process is at the time Purchase Order creation, the company does not know what is the freight costs that is going to be charged by the vendor. The freight charges will be known when the vendor sends the Invoice. The purchase order contains the materials to be drop shipped by vendor directly to customer or cross dock delivery to company premises.
The business requirement is when the MIRO invoice is posted, user will enter the freight charges at the document header level and that value needs to be split among the PO Line items and needs to be posted to separate Freight Cost G/L Accounts based on the account assignment category. For drop ship items the freight cost to be posted to one G/L Account and for cross dock items it needs to be posted to a different G/L Account. Later on this freight cost to be applied to customer invoice for charging the customer with the vendor freight cost.
The solution option we have considered is to define two statistical freight condition types at PO Level (one to be triggered for Drop ship materials and the other to be for Cross dock items), in the pricing procedure assign two different Account keys to these condition types. At MIRO users enters the freight cost as unplanned delivery cost, write the code in a user exit to split this value among the freight line items of the MIRO invoice. As separate Account keys are assigned to the condition types the values can be posted to separate G/Ls. To bring these values to customer invoice we will develop a custom routine in SD pricing procedure.
Request the experts to let me know if there is any simple way to map this requirement.
Thanks & Regards,
GLN.Hi,
As at the time of the PO you do not know the freight costs and you want to post the freight costs in the MIRO as unplanned delivery costs . and there is no way you have to post as unplanned .
Here your requirements are 1. Post to separate GL accounts and 2. distribution among line items .
However both of your requirements are given with sap standard functionality with the below sap link .
Logistics Invoice Verification (MM-IV-LIV) - SAP Library
check spro--mm--liv--incoming invoice ---configure how unplanned delivery costs are treated .
at the same time when you maintain the condition type for frieght iN PO , they will become the planned delivery costs . if this come in to picture FR/IR account will come into the pictute at GR and IR .
i think your requirement will be partially met . and the coding part may become fuzzy rather to go with the standard.
Regards, -
Standard cost with different dimentions
Hi,
We have a scenario where one material can be sold at different length.
Ex: Mat A is wire
1 mr std price $2
2 Mr std price $5
3 mr std price $6
etc., till 10 mtr
user wants to have same material number but to handle the all the prices in standard price at different lengths.
I recommended that this is not possible with SAP so go with different materialnumbers with different lengths.
Is that correct or am i missing something from functionality, can any one help.Hi,
The product is not manufactured its procured from vendor.
If the customer places an order for 5 mt then the the same will bought from vendor and sell to customer.
No inhouse manufacturing or assembling
we recommended to use the different material code for different length.
Just want to confir if thats correct or we can we use one material code for all lenghts.
if we use Variant pricing that will help Sales order process but standard cost in material cannot be updated using variant pricing. -
Shipment Cost for different Forwarding agents in one Shipment Document
Hi.
I have an requirement, can we create one shipment type, which is based on multiple Forwading Agents,
i.e suppose if we have a Route with priliminary & subsequent legs having forwrding agents different at each stage.cost has to be calculated according to the forwarding agents with in the document according to the ROUTE .plz suggest..
Regards.
Sujith.Hi Sujith,
This situation may arriase anytime.
it is possible to create one shipment cost document for more than 2 forwarding agents.
Standard SAP gives all the option in such scenario.
No Z developments required for achieving seperate costing for individual forwarder.
Regards,
Dnyandeo H. Ainarkar -
Allocation of cost to different cost center
Hi Techies,
I have to allocate cost from one cost center to different cost center according to percentage (%). Company wants to show same cost on sender and then breakdown according to % on receiver cost center.
Example: Company wants to allocate cost from CCenter A to Ccenter B1, B2, B3.... according to % like 74.1% to B1, 14.8% to B2. Now which allocation functionality (Assessment, Distribution) I should use to solve this problem. I would really appreciate if you have method or process step to perform this process.
Thank You,
KennyUse transaction KSU2 to call the Assessment Cycle.
Click on "First Segment" and in the segment header, under Sender Values, select Posted Amounts and key in 100% (since you wish to assess all the costs). Under Receiver Tracing Factor, select Fixed Percentages.
Click on the "Senders/Receivers" tab. Now under "Senders", do an F4 (dropdown list) in the Cost Centres field and select your Cost Centres (or groups).
Similarly click on the Cost Elements and dropdown to select your Cost Elements or groups.
Now under Receivers, in the Cost Centre field, key in the Cost Centres you wish to post costs to.
Click the next tab Sender Values
Here, enter Share in % as 100% (default) and under version, enter 0.
Now click on the Receiver Tracing Factor tab. You should see all the Cost Centres you entered under Receivers in the Sender/Receiver tab. Enter the %s you wish to apportion to each Cost Centre.
Save this cycle and run this for the period in question. Before you run this, make sure you post some costs to the Sender Cost Centres. Else the system will find nothing to assess and come back with the same error.
Hope this helps.
Cheers. -
Hi,
In Our system , GL Raw mat Consumption ( Good s Issue) value is differs from Cost element (Raw Mat Consumption). Pls advice why this differance and how to get solve this.
Thanx in advanceHi
It need not be the same in both sides. If certain costs are posted in controlling area (cross-company code, functional area, business area, etc.) the same need not get updated in FI side until the time reconciliation is done.
Regards -
VPRS cost copying different in Returns order and Credit for returns
Hi SAP Gurus,
we created returns order, returns delivery and Credit for Returns.But the VPRS cost copying in Credit for Returns different than Returns order.I have tested in DEV its working fine but in PRD its taking different. I compared copy contrls,condition settings and pricing procedure i didnt found any difference. where i need to check other than these areas.
Regards,
NookaHi,
If if works in DEV then there is no problem with configuration.(Compare configuration of DEV with PRD).
Please check that all change request are moved correctly or not,speciallty related to your scenario.
Any enhancement change request are moved or not.(Because DEV and PRD are different clients. Some requests are client specific.)
Thanks,
Vrajesh
Edited by: Vrajesh G. Nayak on Jan 20, 2010 5:23 AM -
In DFS, How to make servers LEAST COST for different subnets.
Hello, We setup DFS in our domain (SERVER1) and we replicated the DFS namespace into a server which is also a member of the domain but it is on a DIFFERENT SUBNET (let's call this server SERVER2).
How can I make sure that the SERVER2 DFS redirection should NOT go to SERVER1 unless SERVER2 is down, etc.? or How do we make sure SERVER2 clients don’t go to the wrong site and vice versa WHEN we enable DFS on multiple systems?
I have also enable least expensive target selection (site-costing) in DFS but I am not sure if that will work.
Note: SERVER2 is not a Domain Controller
SERVER1 is Server 2008 Standard
SERVER2 is Server 2008 R2 Standard
Please help and Thank you in advance.
Regards,
Rod
--- Network Security AdministratorDear Mandy,
I have run the command DFSUTIL /PKTINFO on SERVER2 Client's computer and seems like it is referred
to SERVER1 DFS namespace targets.
Namespace Referrals is set to Lowest cost.
Here is the output of the command:
C:\>DFSUTIL /PKTINFO
1 entries...
Entry: \Jessel.local\SysVol
ShortEntry: \Jessel.local\SysVol
Expires in 0 seconds
UseCount: 0 Type:0x1 ( DFS )
0:[\filesv02.Jessel.local\SysVol] AccessStatus: 0 ( ACTIVE TARGETSET )
1:[\FILESV03.Jessel.local\SysVol]
DfsUtil command completed successfully.
Please advise.
Thank You very much.
Rod Lopez
--- Network Security Administrator -
Details of SAP Certification Cost in different countries
This is Vijay. i had a strong work experience in SAP ECC6 FI as END USER, planning to do SAP FI CERTIFICATION in Dubai / Singapore, can I enroll only for the exam without enrolling for classroom/online training, as I am good enough with the subject and where it cost less to take exam.
Appreciate it if you can help me in this regard.
<<Moderator: Heading has been changed from "Hi Experts" to meaningful header line and punctuation marks are corrected>>
Message was edited by: Ravi Sankar VennaHi Vijay,
With regards to the email, enclosed below the detailed explanation on the SAP - Certification for Associate.
The rules of registering for SAP certification are considerably different in the countries located in Asia-Pacific region that includes India. This difference is important and has to be discussed in more details because it directly influences the overall cost of becoming a certified SAP specialist.
To appear for the associate level certification without attending any SAP course you need a minimum of 1 (one) year of SAP implementation experience or 2 (two) years of support experience with a minimum of 6 (six) months experience in the module and version of SAP in which you are going to get certified.
The last year of your work experience should be with your present employer.
Your present employer should be either a customer or a partner of SAP.
Enclosed below the are the fees structures for different regions as per the link provided below:
SAP Certification Cost, SAP Certification Fees - SAP Certification
Country
Registration Fee
Other Expenses
Australia
560 AUD
No special requirements.
Canada
500 CAD
No special requirements.
Egypt
400 USD
Please read our post about SAP certification in Middle East and North Africa.
France
400 EUR
No special requirements.
Germany
400 EUR
No special requirements.
India
40000 INR
If you do not fulfill the requirements related to the previous work experience, you have to additionally pay for a training course from an authorized SAP training provider.
Russia
400 EUR
No special requirements.
Singapore
795 SGD
No special requirements.
South Africa
3900 ZAR
No special requirements.
Spain
400 EUR
No special requirements.
UAE
400 USD (1472 AED; 1500 SAR)
Please read our post about SAP certification in Middle East and North Africa.
UK and Ireland
350 GBP
No special requirements.
USA
500 USD
No special requirements.
But getting a slot to write the exam in Dubai is easy and the cost is $400 to appear for Associate. If you are still working for the same company in SAP - FI then i think it should not be a problem for you to write the exam without any training.
Wish you good luck and I hope it solves your purpose.
Cheers -
How SAP Cost Estimate determine Subcontracting Cost, if different Scale Quantity?
As per subject, why 32 instead 36 or 40?
Can we set for it?Davis,
You can create different production order like one production order for new equipment Or Other For second old equipment and old equipment order you can increase the material component quantity .
or second i agree with Mr. Biju K
you can create two cost center
old equipment : xxxxx
new equipment : yyyyy
you can create different work center base on two separate cost center so all cost book in separately in cost center. -
How to track cost for different Vendors through SAP PM
Hi
Maintenance needs to discuss with SAP PM Consultant for tracking the different vendor for civil, painting and external services jobs from asset locations and class. It means that total expenses of Civil, Painting and external services jobs for different locations should be easily gathered.
Also ,As temporary solution of identifying posting for different vendors, how maintenance will be able to find actual amount posted for different vendors
Regards
chandHi
can you tell me where we can make control
When RFQ is created the PR is not allowed to change when the PR is manually created & it is working perfectly.
but when PR is created thorugh work order then even if RFQ is created/released it is allowing to change PR when created throogh work order
Please tell me where is control
Regards
chand
Maybe you are looking for
-
How do I set up an instrument in Logic that can control various perimeters at a time?
Hey guys, I want to make a composition, using the guidelines from an amazing John Cage composition called 'Variations II'. The guidelines involve measuring out a set of lines and dots, the measurements each relating to a sound's frequency, amplitude,
-
IMac 27" i7 quad.. System fonts too small.
Title says it all. Just upgraded from a 24" 3.06 model and while I love everything so far, the main difference is that with the higher resolution, I can now barely read the menu bar fonts as well as browser menubars/bookmarks and even the system prof
-
Any ideas? I'm on a MacBook Air.
-
HI, I am using <t:div id = ""> I want to pass EL in id. Can i do this? I have tried, but its not working.
-
Windows 7 with bootcamp - sound
i just recently installed windows 7 on my macbook using bootcamp. Everything works except i don't seem to have any sound. what should i do... also wondering about connecting to the internet using airport...(using windows 7 on mac)