Costing of Material without BOM & its Impact in COPA

Hello,
I have a scenario wherein Few Finished materials does not have BOM and Routing. However client is aware of Standard Price for these Materials. These materials are lying in stock since long but may get sold. Client is ready to update standard price by MR21 and would not mind to exclude these materials from costing run. However We have profitability analysis active, so as per my understanding while selling such parts for which system does not have costing run, it will give cost estimate error since no costing variant was used for price calculation of these materials.
Need your suggestions.
Regards,
Rahul

Hi….
You don’t use MR21 because SAP don’t create CO-PA
document without standard cost estimate of material which have
price control “S” when you create billing document  .
To change material current stock’s amount, you can use MR21.
MR21 don’t have a role to release standard cost to material master.
For material which don’t have BOM and routing but have price control “S”
, you should calculate standard cost using t-code KKPAN to create billing
document without error related to standard cost.

Similar Messages

  • Production Order for a material without BOM and Routing

    Is it possible to create a production order for a given material without routing and BOM, I know we can
    create a production order for a material without a BOM (with a default routing) just wanted to check with
    the above criteria
    Thanks in Advance!!

    Members:
    Thank you for your valuable replies and time
    Santosh:
    Tried what you have mentioned, but system still picks up a default routing
    Kaushik:
    Maintained Default values in OPJG for the given order type, but system still picks up
    default routing
    Mangalraj:
    have no issue in creating a production order without a BOM, but I am trying to see
    is there a way where I can create a production order without a BOM and routing (not
    even default operation )
    Any suggestions on how to create a production order for a material without a BOM
    and routing (not even default one )

  • In sub contract PO no error shown for without BOM material..

    Dear All,
    I am creating subcontracting PO with item catagory "L" for material "XYZ" and for material "XYZ" i have not created any BOM.
    Then also system is not giving any error while saving PO.
    Generally it should give the error "Not possible to determine any components"
    Also in mesage determination i have assigned mesage ME154 as error still it is not showing as error.
    What could be the reason and what need to do to solve the same.
    Naren

    Dear Jurgen,
    If it is giving an error i will able to use the notes...
    Here i am not getting an error which is my concern
    what i should do to get the error if i am putting material without BOM in PO andnot entering any components..
    Naren

  • Impacts in COPA of changing material and customer master data

    Dear experts,
    In my company we are considering following scenario:
    Currently mySAPerp 6.0 is implemented for all modules for the mother company.
    We have developed a new global template where there are significant changes versus the existing system, especially in the SD processes. Material and customer master also change significantly in terms of content in the tables/fields and/or values in the fields.
    The idea was to build the template from scratch in a new machine and roll-out all group affiliates, but now we are considering the possibility of making an evolutionary of the current system and try to stretch it to the processes defined in the global template.
    The scenario we want to analyze is: Keeping same organizational structure in terms of Company code, CO area and Operating Concern in existing SAP client and make an evolutionary of the existing settings to the global template processes.
    The doubts we are having are the following:
    Changing material & customer master data: Impact in COPA
    Option 1: Material master data and customer master data codes are maintained but content in the tables/fields is changed substantially, both in terms of logical content of specific fields and/or the values in the specific fields. We have following examples of changes.
    Case 1: source field in material master changes logical content. E.g. Material master field MVGR1 is currently used for product series (design line) and the content changes to be the Market Segment. The product series will be moved to a classification field. At least 5 other fields are affected by this. How can data in terms of COPA line items be converted so that they are aligned at time of reporting?
    Case 2: the source field is not changed so that the logical content of the field remains but the values change, i.e. for the same concept there will be different codifications. How can data in terms of COPA line items be converted so that they are aligned at time of reporting?
    Case 3: Characteristics where currently the source material master field is a Z field and the derivation is via table look up and where the Z field changes to a classification field. How can you convert the existing COPA line items to ensure that attributes are aligned? Should new characteristics be created or just change the derivation logic of the characteristic?
    Option 2: Material master data and customer data codes are re-created (codification of records is changed), meaning that new material and customer codes will exist and content in tables/fields is changed (as in option 1)
    Case: material and customer codes are changed. How can data in terms of COPA line items be converted so that they are aligned at time of reporting?
    Iu2019ve never phased a similar scenario and I fear that maintaining operating concern while changing source master data and also SD flows (we have new billing types, item categories, sales doc. Types, order reasons) may lead to inconsistencies and problems in COPA.
    I would like to ask you experts if you have come across a similar scenario and if from your experience, it is something feasible to do or there are many risks involved. What can be the impact of this scenario in existing Operating Concern for both option 1 and 2 and what would be the key activities to perform to adapt the existing operating concern. What will be the impact of the needed conversions on P&L reporting?
    Sorry for the long story. I hope you can help me out.
    Thanks and Regards,
    Eric

    Hi,
       First i think you will need to test if it works for new COPA documents created via billing.
      If it works fine then the issue is if you wish to apply these changes to the historical data already posted.
      Normally there are transactions like KE4S where you can repost the billing document to COPA
      However this may not be viable for bulk postings
      You can perform realignment (KEND) but this only works at the PA segment level (table CE4XXXX)
    regards
    Waman

  • Material costing without BOM and routing

    I have recd an order on sample basis. I want to cost the materia. I don't have BOM and routing.  I want to cost that material manually.  Is there any provision in SAP to do costing in such type of scenarios.

    Dear BSR,
    I guess you are meaning about cost estimate without quantity structure.
    Check T Code KKPAN.
    Regards
    Mangalraj.S

  • PGI Should get block - without material cost in material master

    Hi All,
    The scenario is we want to show error message while doing PGI if the material does not have any material cost in material master. How it is possible? Will we able to do with standards?
    Scenario: Material cost is nil in the material master, system should through error message if it do PGI for that material.
    Please let us know to solve it out.
    Thanks and Regards
    Lakshmikanth

    Dear friend
    According to me this should not be SD consultants worry at all
    1.The moving ave price or standard price needs to be mentioned in MMR by MM people depending on the material type and valuation class choosen and whether you are choosing accounting view
    2.Most of the material types which comes for sales like FERT i dont think you can save their Material master records without mentioning either standard price or moving ave price in the accounting view
    (It really surprises me that there is a material available for sale without mentioning either standard price or moving ave price in the accounting view of its master record) ( What i mean is it is already mandatory )
    If not made then in OMS9 you can make it as mandatory
    All these should solve your purpose
    From SD side you can include VPRS condition type in the pricing procedure which will be statistical
    Try changing  that to mandatory and see what is the impact
    I think now at sales order level itself you can control
    Regards
    Raja

  • Prodction order without BOM

    Hi,
    Please tell me  we have creating Production order without BOM(Bill of Material) & post the BOM Component of Production Order Manually. when developing the report Material Number wise then BOM not found in the report. So, i want to know that how to relate BOM Component with Material Number & which will be table to use in this report.
    AmAn

    Hi Aman,
    which report?
    If you don't select the BOM, then certainly there is no BOM component.
    Furthermore, BOM are not referenced in the production order, but the components copied into the order, i.e. these are saved in table AFPO.
    But if the components are not maintained manually in the production order (same table), and only the consumption posted directly as unplanned consumption, then you will have trouble getting a link. Possibly only in MSEG by identifying the production order number as the cost collector.
    Regards,
    Kay

  • Bills of material without plant.

    Hi,
    what is the impact to create a Bill of Material without Plant ?
    Best regards

    Hi,
    Special features of group BOMS:
    A plant check is not carried out for the materials in a
    group BOM.
    A group BOM is not exploded in material requirements
    planning and in the production order.
    Group bills of material are mainly created in the design
    phase and then later assigned to one or more plants for
    production.
    A collection of bills of material that lets you describe a
    product or a number of similar products.
    The following bills of material comprise a BOM group:
    All the variants of a variant BOM
    All the alternatives of a multiple BOM
    Regards

  • MRP run without bom explosion

    Dear All,
    Can it possible to run mrp without bom explosion against demand management & demand program for 78 weeks its mid-long term?
    BOM is not considered by client,so it possible to run mrp without bom?
    Regards
    Gajjen

    Hi,
    You Can run MRP with out BOM explosion
    Option 1: In MRP 4- Set  MRP dependent requirement - 1
    or
    Option 2: Make the BOM status to 2 In active.
    or
    Option 3:
    IF you want BOM for Other purpose such as costing, Then
    Create a New BOM status as per your requirement in OS23,  Remove the  check mark of MRP  Explosion .and assign to the BOM status to respective bom
    Regards,
    Sundaresan
    Edited by: Sundaresan . E. V on Aug 26, 2010 5:03 PM

  • Sample production run without bom,routing

    at our client place we have a scenario where we will run sample production (before real production run) without creating bom/routing for the material...
    someone suggested we use finance internal order and then post the material documents in migo against that internal order and labor costs in kb21n..
    is this the only easiest way for this kind of scenario? or do you have any other ideas?

    Hi Swatghi Rege,
    You can create a production order without Routing and without BOM by creating a new order type.
    To be able to create an order without Routing: Change the Config in OPL8 ( order type dependent parameters) as routing optional.
    To be able to create the Order without the BOM you will need to:
    - Configure a new BOM Application. This can be done in tcode OS30.
    - Create a BOM ID in T-code OS31 with BOM Usage as Production.
    - Assign this BOM ID in BOM Application.
    - In the ID maintain a BOM alone without any items.
    - Finally in OPL8, you need to assign the new BOM Application for your Order type.
    Thansk and Regards,
    Mariano

  • Posting Actual Costs at Material Level

    Hi All
    For our standard costs we will have BOM Components, Activities from Routings and additive costs. We also have activated Material Ledger and will use it for Actual Costing, the objective being that each and every actual cost will be brought to the SKU level. For BOM components and activities that is no problem since it will be done through settlement.
    However for cost components that have additive costs how do we settle them to the material ledger? Do we need to do MR22 for difference between standard and actual? Is there a way to do this through a template allocation or some other allocation method?
    Thank you

    Hi
    Lets assume, you have Std cost of 100 USD involving Material + Labor and an additive cost of 10 USD entered manually from CK74N...
    During production order processing - You would issue material components and confirm Labor hrs... Say, this amounts to 120 USD as against the std cost of 100 USD...
    However, in prod orders, there will be nothing posted against the additive std cost of 10 USD... If you wish, you need to post it either through template allocation from some cost centers or use some assessment cycle or transfer manually from KB11N or use a costing sheet
    Regards
    Ajay M

  • How to get report for cost estimates material cost only

    Hi Gurus,
    We have requirement in sales order costing that we need to develope report which shows only Material cost for all BOM levels.
    Normally at lower levels cost of Material and activity cost will be treated as Material cost for next level. Here I want to consider only material cost not activity cost at lower levels
    Pls suggest the logic and tables for exploding BOM and fetching material cost only.
    Thanks
    Sneha

    Sneha
    If you tick the "Roll up" indicatorfor each cost component  in Cost Comp Str OKTZ, then overheads do  not get added to the material cost... This is my understanding about it.. Is it behaving some thing different in your case??
    br, Ajay M

  • Is it possible to activate Batch Management for a material without Class?

    Dear Experts,
                           Is it possible to activate Batch Management for a material without having Class & Characteristics maintained. As my requirement is to procure Fuels in Batches only with external no. assignment without any parameters to be checked at the time of Goods Receipt? Batches are needed for Accountability purpose.
    Regards

    >
    Chandan H N wrote:
    > Dear Experts,
    >
    >                        Is it possible to activate Batch Management for a material without having Class & Characteristics maintained. As my requirement is to procure Fuels in Batches only with external no. assignment without any parameters to be checked at the time of Goods Receipt? Batches are needed for Accountability purpose.
    >
    > Regards
    Please check this answered link:
    Batch-classification view
    If you want classify a batch, then you should have maintained the batch classification in material master which is either class 022 or class 023 (depends on your batch level set in cusotmizing). The material class 001 has no impact on the batch classifcition, it is what it is: a classification for the material.
    Edited by: Afshad Irani on Jun 20, 2010 4:40 PM

  • MRP run for header material with bom usage-3

    Dear All,
    We have header material with bom usage-3.We maintain the stock at child components only ,not at header
    I have created the planned independent requirement for header material.I have created a sales order but sales order is not shown in md04.
    What can be the further setting  I am missing for mrp run of above scenario.
    with regards,
    pradeep

    Dear ,
    Couple of checks points for you :
    1.Check the material master Sales Org Veie-Item Categoery .As you have mentioned Item Categoery -TAQ which is not relevent for requirement planning throgh schedule line category -CT ( CT means there will not be any inventory or good movement and requirement will not be passed for MRP ) .Only CP -line item categoery does requirement passing through MRP and it will show u in MD04. So the summery is if you want to generate an MTO order for the same FG material , you should matian the Sales Line item categoery as MTO in sales Org View and it will pop up in VA01 whiel logging Sales Order .
    Generally , TAQ item categoery are used in Project Billing or Delivery .ok  and they will not be having any availabilit check so it KP ( no check ) .
    But for MTO order , you should have availablty chek 02/01 in MRP3 view and also MTO Sales Item categoery .
    Based on the above information logg an sales order , release credit chek in VKM3, SAVE and check in MD04.
    Create PIR in MD61 and Run MRP on the both cases .I have tested its working .but noit with TAQ item categoery ok
    2.Why do you need to create Sales Order for dependent Item-Y because it will be in X-BOM item  ? Make sure that Y- should have Sales Item categoery in material master -MM02-Sales Org View as NORM item .If you really want to create sale sorder for this item , it should TAN or NORM .
    3.Other PIR detail is fine .
    Try and revert back
    Regards
    JH

  • Receipt material without purchase order

    Dear ALL,
    We want to create material receipt not without purchase order and try it by movement type 501 and its created. but problem is if material moving average is 0 then system post material without any account entry.  now i want system restrict to user if value is 0 for posting.
    Regards,
    Mukesh

    Hi.
    Use the following logic in the system.
    At the time of the creation of the material document pass the material number in the MBEW table with the entries as :
    Material
    Valuation area = equal to the plant number
    check the material price = moving average or standard price.
    in case both the material prices are  0 then display the error message in the MIGO screen. It will stop posting the 501 movement type.
    I hope this helps

Maybe you are looking for