Crash notice, could not fix it, many reports sent to FF, removed FF, cannot download FF.

While trying to troubleshoot my computer, I eliminated Firefox. Now, while using Internet Explorer, I cannot get Firefox to reload from the FF free download site. I keep getting bounced from the download page, to the "try this link " link, and back.

Hi,
Please also try these:
https://www.mozilla.org/en-US/firefox/new/
https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/10.0.2/win32/
ftp://ftp.mozilla.org/pub/firefox/releases/10.0.2/win32/
http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest/win32/

Similar Messages

  • Should I pay the $245 for support? I ask because every time I have they could not fix the problem, I found the problem on my own.

    I ask because every time I did call they could not fix the problem, as in I could not send mail, I was told it was my Internet, then they tell me it is my computer. After spending many many hours on the phone with Apple, I was told I had to reload my hard drive. Which by the way takes a lot more then a few hours. The next day I found I still had the same problem. I could not send mail... I found the problem my self// I didn't have a mail box set up to send mail. How sample that was. Then the next time if I wanted to empty trash I had to turn off the computer then reset to do so. When I called tech support she tells me that is normal and they had to do the same thing every time. Well she is wrong in that if you use "empty securely" and not the one that just says empty trash then you do not have to reset or turn off your computer.... So I ask what am I paying $245.00 for?  I am sure I will need support at some time, and at least it does give me someone to talk to.

    starwalls wrote:
    I thank you all for all the replies..
    I will be buying the service plan if only for the hardware... I really can not say much about the other support, other then every time I get a female support tech she seems to not know what she is talking about and says that is the way it works... I just keep calling back until I get someone that will know a little to help fix the problem. And yes I hate to say is most likely a male tech.
    I do agree apple is NOT what they started out to be... How sad!!! MADE in CHINA  very SAD. And here I thought I was buying USA.......
    FYI - there has not been a name brand consumer personal computer actually manufactered in the USA in years.  Lenovo, Dell, HP, Acer, Apple, Samsung,... - you name it they are ALL made in China or Tiawan. Often many of those brands are being assembled by the same Chinese company in the exact same factory, pulling parts (hard drives, displays, RAM, etc) from the exact same bins.  Foxconn for example, which makes iPhones and iPads for Apple, also makes dozens of other makes and models of tablets, ereaders and smart phones for other companies.  Like it or not, but the consumer electronic manufactering center of the world is China.
    The only consumer computers actually made in the USA these days are by local custom build companies, and it has actually been that way for many years now (I think twinhead may have been one of the last with a plant in the USA - they are still around, now GammaTech, and they still do their "final assembly" in the USA but most of thier manufacturing is done in Tiawan and Malaysia).
    By and large, the USA has been out of the actual consumer electronics manufacturing/assembly business for a decade or so now.

  • I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it.  Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloade

    I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it.
    Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloaded version three and I have an account and a password - was not able to transfer my books from my reader to version three (and I don't like the lay-out - I would prefer to stay with the old version as I also loose all my download date info..)
    But all the books I have bought over the last three years are in the old Adobe Digital and I cannot access them any more. When I use it I get the message "that the document is licensed to a different account. I can't even open the books on my computer.
    When I go to my Kobo library, I cannot also not open my books and get the message "this doc is protected by adobe digital rights management and is not currently authorized for use with your adobe. please sign in with your authorized adobe id and try again"
    I believe the problem is that I do not seem to have a digital id for my old adobe or that the Kobo is not in sync with it anymore.
    can you please help me - going on vacation in three days and cannot go without books.

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • I am a new user and my Iphone sound stopped. The Verizon store could not fix it so a new Iphone has arrived.  What do I do to keep all the apps I have on the phone? Can I transition them somehow to my new Iphone or do I start all over?

    I am a new Iphone user so I am going to sound very dumb. The sound in my phone stopped working for some unknown reason about a month in. Verizon could not fix so a new phone was sent. I sit here with my current soundless Iphone and the new one. The guy at Verizon moved my contacts over but what can I do to get all the apps I downloaded to be on my new Iphone before I send the current one back? He said something about downloading something on the my PC (not a mac) and then restoring from the PC to the new phone.  Where do I start getting the stuff downloaded from my current soundless phone to the PC?

    iTunes: About iOS backups - Support - Apple

  • I can not open folders from my documents. it closes with notice Could not complete your request because of a program error.

    I am trying to open files with Photoshop and I get an error message
    Could not complete your request because of a program error.
    I have tried to open inmany directions still I get this notice
    Could not complete your request because of a program error.
    It started when I upgraded to Marverick

    Can you open the files in the Finder?

  • SFTP Seeburger adapter - Could not find channel for report handling between

    Hello Friends ,
    We have R3 -> PI-> SFTP scenario . The messages are transferred successfully and the file is successfully received at the receiving end . But when we do communication channel monitoring , we see errors in Receiver CC . The Reciever CC contains SFTP adapter (Seeburger) . Recently the Seeburger adapter is upgraded and the below error has started occuring then onwards .
    Error Message which we see in CC monitoring for Receiver CC (SFTP) is as below .
    Initiation of Transmission Report( job id: da405030-30c6-11df-8b6e-797b8921162c milestone: 290) failed! Exception occured: Error while preparing XI message. Error: Could not find channel for report handling between parties: fromParty, toParty: Itella) - com.seeburger.xi.connector.fw.ConfigurationException: Error while preparing XI message. Error: Could not find channel for report handling between parties: fromParty, toParty: Itella) [3/16/10 8:40 AM]
    Could experts help me ...
    Thanks for your time .
    Regards,
    Laxman Nayak .

    Hi,
    I also have the error you mentioned but we're implementing the Seeburger SFTP adapter for the first time.
    I've requested transport acknowledgements in my ABAP proxy and have checked the 'Deliver transmission report' flag in the adapter but I don't know what else I must do.
    Any help would be greatly appreciated.
    Thanks,
    Alan

  • Could not find a Hyperion Reporting and Analysis  in  workspace

    i installed hyperion 9 system them with reporting and essbase ..
    after configured all .. configure shows sucess but after shared services configuration failed in BI
    unable to open workspace
    when i tried to open Workspace
    "Could not find a Hyperion Reporting and Analysis in workspace9 server running on server at port 6800. Please verify your server connect string and confirm that the server is up."
    Edited by: user1624634 on Mar 10, 2010 12:28 AM

    Hello
    May i suggest adressing this question to a Hyperion/Essbase forum:, here is the link i am certain you'll get your answer quicker.
    Essbase
    Thanks

  • Could not find  a Hyperion Reporting and analysis -system 9

    Dear Experts ,
    i have installed Essbase and planning
    i have configured work space
    http://localhost:19000/worspace
    when i am trying to log in to work space the following error is showing
    Could not find a Hyperion Reporting and analysis -system 9 server running on Hyperion at port 6800.please verify your server connect string confirm that the server is up
    i have started all Hyperion services
    could you please help me in this regard,
    thanks in advance
    Kishore

    Have you installed Reporting and Analysis Services?
    If you have already installed then start the Reporting and Analysis Services..
    Hope this helps..
    Regards,
    Manmohan Sharma

  • Adobe LiveCycle Designer 8 - Crash (Memory could not be "written")

    I was using Adobe LiveCycle Designer 7.1 for the past half year. All of a sudden, it started to crash - Memory could not be "written".
    During that period I heard quite a lot about Adobe's bugs, so I decided to install Adobe LiveCycle Designer 8.0 hoping to see improvement over software stability and compatibility.
    Of course I uninstalled the older verion, deleted the older file folders then did a clean-install of 8.0
    Interesting enough, the first time I open up Adobe LiveCycle Designer 8, everything went normal. Without doing anything, I closed it then tryied to re-open it, the splash screen shows up then nothing happens - not a single error message.
    Then I tried the following:
    1. restarted PC. Tried the open-close-reopen squence, same thing happened.
    2. uninstalled 8.0, deleted the folders, reinstalled 8.0. open-close-reopen, same thing happed.
    2. uninstalled 8.0, deleted the folders, reinstalled 7.1. Open LiveCycle Designer 7.1 -> Crash (Memory could not be "written")
    Findings:
    1. the errors are consistent
    2. it can open ONLY once, is this an activation issue? is there a corrupted file?

    Well when I tried to open the sample project I got this error:
    "Open project was cancelled or the application was unable to load database for "C:\PROGRAM FILES\Adobe\Adobe RoboHelp 8\RoboHTML\Samples\en_US\CCC\CCC.cpd""
    I couldn't delete the CPD file because this client has locked down the computer to the point where I cannot do anything more than view the files in the program folder. Without having the ability to write to the program files folder is it possible this is an issue? Or is it ok that I do all the creating content in the RoboHelp Project on the C drive?
    It allowed me to copy the Sample folder to the RoboHelp Project folder on the C drive. I deleted the CPD file then opened it without a problem.  I created a topic and added some content, but nothing happened. When RH8 crashed before there was no rhyme or reason and I cannot duplicate the error. Just seems very sponataneous.
    I need to finish the style guide project today, but I will also play with the sample folder and see if (1) it happens again and (2) if I can figure out how to duplicate the error consistently. The first 2 times I had been in the new topic and wrote several paragraphs without saving it. Can't remember how long from topic creation to crash. And I can't remember if it crashed on trying to save or not, but I'm pretty sure I had not tried to save prior to the crash.
    Regards,
    CJ

  • Could not start the Crystal Report Application Server service on local computer

    Post Author: [email protected]
    CA Forum: Deployment
    Hi
    I have a following problem.
    I have installed Crystal report application server(RAS)(CE embeded 10) on Windows server 2003 enterprise x64 edition.
    When i start it, i see an error:
    Could not start the Crystal Report Application Server service on local computerError 1067: the process terminated unexpectedly
    Sometimes, i can start it but it stops a few minutes later.
    I have disabled DEP (data execution prevention).
    Log:
    Faulting application crystalras.exe, version 10.0.0.533, faulting module unknown, version 0.0.0.0, fault address 0x00000000.
    Please help
    Thanks for your help

    This error occurs after an initial install, when the Oracle suite is installed logged in as the user(who has admin rights on the machine). If this is the case,
    1.Go to Services (Admin Tools > Services)
    2.Double click the Oracle services( BI Server or Presentation or TNS Listener).
    3.Go to Log On tab
    4.If local system account is checked , un-check that option. Check "This Account" option
    5.Give the user information for that machine(e.g domain\username)
    6.Specify password associated with the user ( the username/pwd that is used to login to the machine)
    7.Confirm pwd and click Apply.
    8.re-start the service.
    This is what i did , and it worked.
    good luck and hopefully oracle addresses these issues , they become frustrating to use the product.
    Thanks,
    Ram

  • HT4623 I have an iphone 4s and since it's been fell in the water I can not use the Wi-Fi no more, the maintenance guy could not fixed it, Can you do something?

    I have an iphone 4s and since it's been fell in the water I can not use the Wi-Fi no more, the maintenance guy could not fixed it, Can you do something?

    the maintenance guy could not fixed it,
    If someone other than Apple has attempted to, or opened the iPhone you will have forfeited access to the out of warranty service as described by imobi

  • After updating I can not get over 1000 songs from my library to play.  I spent 2 hours with Apple support and he could not fix it.  Anybody got any ideas?

    After updating I can not get over 1000 songs from my library to play.  I spent 2 hours with Apple support and he could not fix it.  Anybody got any ideas?

    While not exactly the same, I wonder if this would help?  http://support.apple.com/kb/TS1967

  • Could not connect to the report server

    I have created  SSRS reports using sql server 2012, those are works well but when i deploy the solution that time i get an error 
    "Could not connect to the report server http://myservername/ReportServer.
    Verify that the TargetServerURL is valid and that you have the correct  permission to connect to the report server.
    Please suggest me how to resolve this issue i lost more time on this problem.
    Thank You.

    Hi Anil,
    As JJordheim posted earlier, if we have no permission to perform the action we may get the similar issue.
    If the issue is persist, the issue may be due to User Account Control (UAC). There is a similar issue, please refer to it.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/24011d1c-e61f-4f47-b037-1056c29bef4a/could-not-connect-to-the-report-server-httplocalhost8080reportserver-verify-that-the?forum=sqlreportingservices 
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • No charge on phone took to store and they could not fix, i need my numbers,

    phone will not charge, took to att and they could not fix. I need to get numbers,,and pics--help

    If you can't turn the phone on and you have no backups, there is no way to get the numbers.

  • Using magicjack on a mac it wont work support from MJ could not fix problem

    using magicjack on a mac it wont work support from MJ could not fix problem

    Sorry about lack of info it wont boot up at all they logged on to my computer to try and fix it but everthing they tried failed ,they formatted  did something with  java  and changed some setting  i was thinking maybe it has to with the my Mac   for some help

Maybe you are looking for