Create TO from Quality storage type

when i try to create TO for certain material through LU04 , the TO created but the source and the destination are the same ( the quality storage type ) see the details of the TO
2000012767 0001 1014654            Q   918 QUALITY2                250 KG 1
    AE50            02.08.2010         922 TR-ZONE                 250
2000012767 0002 1014654                922 TR-ZONE                 250 KG 1
    AE50            02.08.2010         918 QUALITY2                250
it should be the normaol storage type and the distination shold be the bin
how can i solve this problem

Pete,
You can also mention a specific qunatity in Material Master WM2 as LE quantity.
Once done you can go ahead with LT01 with Full quantity & that will split in multiple line Items.
Please use TO creation screen control as 1 i.e. Putaway prep that will help you to entre multiple destination Bins (if differs)
Thanks,
mahesh

Similar Messages

How to transfer stock from one storage type another storage type

Hi Guys
I have 10 items
How can I transfer all in One Single Transfer order from one storage type to another storage type
I need to take TO print for all these 10 TO items

Hi,
Goto LT01 transaction with Movment type = 999 and stock category = Required stock category. Create a PCN and process the remaining process so as to change the stock type.
Regards,
Dilli Babu R

WM-Backflushed materials issued from different storage type

Hello my client has an issue in WH Service order issue
we face the problem that articles which are marked for back flushing aren't properly handled by the system with service orders. In normal production orders when the activity is closed on which the articles are set, the back flushing items are atomically issued from warehouse type 100 (location Backflush according to the rules set by LPK1,2,3) however when the activity of an Service order is closed the items are issued from warehouse type 914 creating and imbalance in WM. Please Is it a configuration issue or any other issue i should liik in to.
Kindly guide me to handle this.
Regards
Bheema

Hi,
Please check for service orders, yu should check CRATE parts and RELEASE ORDER parts. In their control cycles in LPK1/LPK2 you can define from which storage type / bin they are consumed when you book consumption against your PrdOrdservice order.
At the time of backflushing (in standard system) the components will go to 914+dynamic bin (or fixed bin, based on your settings). Normally TR creation is set on WM/IM interface and processing the TR you can move the components from WM to interim storage type 914. Thanking you.

Search for material from 2 Storage types

Hi,
When creating a delivery for Subcon PO Via ME2O the transfer order is created automatically from the source storage type
657 ( for example). The requirement is that the system should also look for material from source storage type 460 ( for example).
I did the following customization ( SPRO path):
1) Logistics execution -> Warehouse management -> Strategies -> Activate storage type search - > Determine search sequence --
For the combination of Warehouse number & Mvt type 541 ( GI to Subcon delivery) -- 657 and 460 are assigned.
2) Logistics execution -> Warehouse management -> Activities-> Transfers-> Define Mvt types-> For the combination of Warehouse number & Mvt type 541 -- I have assigned source storage type as 657.
With the above the system does the search from 657 stoarge type only and not from the both.
Is there any other setting to meet this requiremnet?
Best regards,
Prasad

Hi,
I removed 657 source storage type in the 541 mvt type set up ( Source storage type is Blank) . In the Movement Type set up for 541, "Ref.Stor.Type.Search" field is already with 541.
The Storage Type search sequence is maintained for the combination warehouse number & 541 mvt as 657 and 460 ( storage types).
When Delivery is created for Subcon PO, The Transfer order is not created automatcially ( Only delivery is created)
The requirement in detail is as below:
There are 2 plants ( AL70 & AL77) linked to 1 Warehouse (AL1). When delivery is created for subcon PO in plant AL70, the TO is also created automatically with source storage type as 657 and destination storage type as 916. The additional requirement is when delivery is created for Subcon PO in plant AL77, the TO aslo should be created automatically with source storage type as 460 and destination storage type as 916.
Regards,
Prasad

Create multiple TO's from IM storage type

Bit rusty on SAP transactions.
If I have stock in a 'Differences' Storage Type (non-SU) that I want to bring back into storage on 30 different SU's is this possible?
Other than one by one using LT01. Can I use LT04 in some way?

Pete,
You can also mention a specific qunatity in Material Master WM2 as LE quantity.
Once done you can go ahead with LT01 with Full quantity & that will split in multiple line Items.
Please use TO creation screen control as 1 i.e. Putaway prep that will help you to entre multiple destination Bins (if differs)
Thanks,
mahesh

How to remove the stock from 916 -storage type

Hi experts,
In LS25 for 916 storage type it is showing 30 & -20 Quantity for two Quants
How to remove the stock?
Regards
vr

the usual way to remove quants from 916 is by cancellation of the picking, which is done with LT0G transaction.
if the delivery is already goods issued, then you have to use LT01 to move the quants.
The positive quant of 30 quantity can be moved to the place where it phyiscally is.
the negative quant can only be eliminated by moving a quantity from a positive quant onto it. You should have a positive quant of this material in any bin of your warehouse. so you move from this bin to 916.

WM : Automatic replenishment TO for fixed bin from warious storage types

Hi Gurus,
We have storage type 011 - fixed Bin storage type , 022 - self Storage and 055 - High Rack Storage. Also we have set up for automatic TO creation for fixed bin in fixed bin storage type when stock falls below minimum fixed bin quantity.
My problem is : system only creates TO when there is some stock in 055 - High Rack Storage. If there is no stock in 055 system doesn't create any TO. But there's lots of stock in 011( other than fixed bin) and 022.
we want system to serch for 055/ 022/ 011 sequence. So if there is no stock in 055, it should go for 022 and then 011.
Can anyone advise me on this? I will be really grateful.
Kind Regards
Raja Ram

Hi,
Can you please explain me the steps required to config the picking strategy for fixed bin replenishement?
Thanks & Regards
Raja Ram

Creating pdfs from different file types (.doc,.xls etc) and merging them into a single pdf with book

Hi,
I need to create a pdf from 2 different file formats, for example .doc and .xls file and merge the contents of the two files into a single pdf.Also the final pdf created must contain bookmarks and links. Thanks in advance.
Priyanka

You can do this on the desktop using the Acrobat SDK as a custom plugin.
You can do this on a server with Adobe LiveCycle PDF Generator.

Stock transfer to physical bins from 998 storage type

Dear Experts,
As part of data conversion,After loading huge stock into SAP 998 st type into INITIAL bin,I want to move the stock into physical bins.I have SU management activated.
1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
4) I want to print the storage units simultaneously during this process. How can I do this?
I really appreciate your help.
Thanks
Edited by: RKsap193 on Oct 14, 2008 10:35 AM

Hi,
I would suggest you to chek this link:
Re: Bin Number for the First Time Putaway
if you are not already live, then it should be possible to add the target bin field directly to the 311 movement. so you do not even need TOs to get the material into the bin for the WM go-live.
(Jurgen)
Regards,
Csaba

Stock transfer from 998 storage type to Physical bins

Dear Experts,
As part of data conversion,After loading huge stock into SAP 998 st type into INITIAL bin,I want to move the stock into physical bins.I have SU management activated.
1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
4) I want to print the storage units simultaneously during this process. How can I do this?
I really appreciate your help.
Thanks

Answering your questions:
1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
Use this info to load the stock into the correct storage bin
2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
Don't really understand what your doubt is, but if your MM/WM setup is correct, this should go OK
3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
LSMW, with 'Standard batch/Direct Input' Object 0220 and Method 0000 (should be assigned to program RLBEST00).
4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
Based on previous answer, no!
4) I want to print the storage units simultaneously during this process. How can I do this?
Just assign the correct print code to the 561 movement type...but beware for the fact that a lot of labels will be generated at the same time and you can stuck your printer :s

Create xml from a collection type

can anyone please explain me how to create an xml from a neseted table

Hi Mario,
Thanks for letting us know about this problem. I have logged a bug on this.
If you should find any more problems like this, please let us know.
Thanks,
David

RE: Transferring stock from storage type A to storage type B

what movement can I used in WMS to move stock from storage type A to storage type B for replenishment?
Bye

Hi ..
I think for replenishments standard movement type is 319 .
You need to assign storage type with this movement type.
Run Lp22 or Lp24 to generate replenishment .
If its one time activity you can use LT10 with movement 999 to transfer from one storage type to another.
Hope it helps
Jinoy

ECC6.0 WM creation of one TO per Storage Type

Hello,
I'm currently implementing WM at my customer using various Storage Types. During testing we created GR in IM for 2 materials (in one document), one of them is relevant to quality inspection but the other one is not.
TO creation has been done automatically (as expected) from interim storage type 902 GR area) to interim storage type 917 (quality area) for the first position. Also a position for the second line has been created from 902 to storage type 042 (main shelf).
Technically this is all OK. However I was expecting to have 2 TO's instead of 1 TO with 2 positions. How can I trigger the system to create a seperate TO per destination storage type?
Thanks beforehand big time!
Alex

Hi,
It was working at the time I posted...so, please complain at SAP AG...
You can use this link to access online SAP help:
http://help.sap.com/
('SAP R/3 and R/3 Enterprise' - on the left)
E.g.
http://help.sap.com/saphelp_47x200/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
(you can use search term 'Transfer order split')
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f83df24afa11d182b90000e829fbfe/frameset.htm
Additionally you can use this as well:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LEWM/MMWM.pdf
BR
Csaba

Batch Determination in SD - Fixed Storage Type

Hi,
We have enable automatic batch determination at the delivery stage (VL01N). for example:
Plant: 1000
Storage Location: 3000
Warehouse number: 300
Storage type in warehouse number 300: 910,911,912, NF1, NF2, NF3
In SD batch determination process in some cases batch are select from storage type 910 or 912 or NF1 (depend on unrestricted use), how to configure in SD batch determination configuration for always select batch´s from fixed storage type (in this case NF1 or NF2 or NF3).
Regards,
Enrique Figueroa
Edited by: Benito Enrique Figueroa Flores on Sep 30, 2008 11:46 PM

Nice idea, but what is your plan if no other batch is there, and all stock is in the interim storage type?
From my point of view it does not really matter where the process flow stucks, if you wait for batch assignment in delivery until the batch is in its real bin or if you do the assignment right away and the creation of WM-TO stucks until the quant is moved from the interim storage type to its final bin.
You just have to understand that batch determination and source bin determination serves usually different needs.
I usually search for a by certain quality figures to meet my customers requirement. Or by age, to always issue the oldes stuff first.
A interim storage type is a warehouse internal thing, as I already said, nothing phyiscal. And in WM you use the storage bin search to determine the bin from where you can pick the desired material and batch.
My batch determination is setup to execute automatically when delivery is created. My deliveries are either created manually at the shipping office or automatically with a batch job.
Instead of using LT03 we have to use LB10 to create a WM-TO. Of course this will fail if the quant is locked because of an open TO or if the storage type where it physically resides is not includes in the search.

HU without inventory management and message L3778 in storage type 999

Hi experts,
Need suggestion on the process to add inventory of an HU with status 'HU without inventory Management'. This issue has occurred out of the below scenario:
1. our warehouse is HU & WM managed.
2. We have a transfer order for a delivery document requesting to pick up 100 cases of MAT1 which is assigned to HU1.
3. While confirming the transfer order user has confirmed difference for the full quantity of 100 because the SU/HU was not found in the bin.
4. The system has set the status of HU as 'HU without inventory Management'. The HU is empty.
5. system has moved the stock from the bin to difference storage type 999.
Now user has found the stock for this HU and he wants to post the stock back into the bin. system does not allow to move the stock back to bin using LT01 as we get error message 'L3 778'.
What will be the best practice to get the stock back into the bin and post the stock into the same old HU.
Is there a process wherein we can post this stock to another bin and repack into the old HU?
Thanks,
Harish

Thanks Manish on the hint. I was able to transfer stock to partner location and then bring back to original Storage type/Bin. Below steps was used to fixed the issue:
1. Initiate a transfer of stock from WM/HU Sloc where the IM stock resides into Sloc 9099. An outbound delivery is created during this process.
2. Create a transfer order with reference to delivery and pick the stock from 999 storage type.
3. Create a Pick HU using LH01 and assign the HU on the pallet to the transfer order.
4. Confirm the transfer order using LT12.
5. Perform PGI for the delivery.
6. Use HUMO to display the HU and then you can transfer the stock back to WM/HU location using the storage location transfer option available on the HUMO screen(EDIT à change HU posting à Storage location)
7. Perform Bin to bin transfer to move the SU from 921 storage type to putaway the HU/SU back to the destined Storage type/Bin.
Best Regards,
Harish

Create TO from Quality storage type

Similar Messages

Maybe you are looking for