Creation of new task list in CharM not possible

Hello!
I am using SOLMAN 4.0 (SP13 with the newest SP) and the problem to create the task list in Tcode: SOLAR_PROJECT_ADMIN --> System Landscape --> Change requests --"Create task list".
The following error occurs:
The project is not released. Hence cycle can not be created.
/TMWFLOW/CONFIG_UI017
How to solve this problem?
Any helpful information will be appreciated.
Thank you very much!
regards
Thom

Hi!
Yes, the problem was wrong configuration of systems.
Please try the following:
- your systems in system landscape have the right roles
- your TMS configuration is mandant dependent
- you have delivery as well consolidation routes
You can also run the check for the consistency...
You can write back, if the problem still exist...
regards
Thom

Similar Messages

Task Lists Alerts Will Not Send Using AD Groups

SharePoint 2010 (upgraded from 2003 to 2007 to 2010)
Exchange Server 2013
Alerts on Task Lists will not be sent if "Send Alerts To" is determined by AD group rather than being identified by specific user account.
This was working previous to our Exchange servers being upgraded to 2013, but sometime afterwards (we are not sure it was directly after) they stopped working. Our test server (straight 2010 install) still sends these alerts. The "you have
successfully created an alert" still works in both environments.
I have tried this on a new Task List, recreated the alerts, restarted the alert service, still no dice. The service is clearly still running, since it will send an alert to someone who is specified by their user account instead of just part of the
AD group. It can't be an Anti-virus or filter issue, since the same users can receive an alert when they are added directly to it, but not if they are added through a group. We have verified the settings in AD (and it's still working on the test
server anyway) and I can't think of what else to check.
( I followed all of the steps in the marked answer for
this post as well)
Could this be something spcific to the 'upgraded' version of SharePoint? That is the only obvious difference between our Prod and Test servers. Does anyone have any other ideas?
As always, thanks for any input!
Elli J Project Solutions Specialist Blog: http://projectserverpants.wordpress.com/

Inderjeet: The groups are both AD and Exchange, that terminology may have escaped me in my explanation. I'm a weird admin because I know little about the standard windows side and only work in Project Server and SharePoint.
The alerts work on our test server for the groups specified, and the "an alert has been created" function works just fine, so it seems like SharePoint is able to determine who is in the list and send to exchange just fine. It's just the "Alert me"
function for new items or changed items, etc, that's not sending. Thanks for your help!
Elli J Project Solutions Specialist Blog: http://projectserverpants.wordpress.com/

Not able to create a Task List for Charm Retrofit

Hi All,
we are trying to implement retrofit for our client. Created two projects one for implementation and one id maintenance and defined the system landscape for both.
I have checked the RFC connection for all the systems involved and all works fine. IMG projects are created successfully for both.
Problem comes when we are creating a maintanance cycle or task list after activating the change request management. We always get a logon screen after giving the name of task list and press ok. First we thought it could be the trusted RFC issue but trusted RFC for the current user is working fine.
Could anyone know what is the problem and if you faced the same issue pls share your experience what all did you try to rectify it.
Thanks
Tripti

Hi,
BC sets are active. I have already checked, it ended up in warning but its general we can avoid it. One thing which we found out was thi error when I am checking the application log for the project
System cancel RFC destination SM_GTDCLNT020_TMW, Call TMW_SET_PROJECT_SWITCHES: No authorization to change file /usr/sap/gttrans/a ctlog/GTDZP000XX.GTD
I don't understand what exactly is this error about but informed the authorization team regarding this.
Any idea?
Thanks,
Tripti

Error when creating Task List in ChaRM

I am getting this error after I activate Change Request Management and attempt to create a task list.
Error writing to table /TMWFLOW/PROJCTC
Message No. /TMWFLOW/TASKLIST177
There is no long text. Please advise

Configuring ChaRM in a new client, entries in the table above already existed for the maintenance cycle the new client was trying to generate. deleted entries form database.

Inspection task list usage is not picking automatically?

Hi all,
whenever I create inspection lot for source inspection (for PO) through Qi07, in the inspection lot, task usage assigned as a 6(goods issue), but i will assign 3 (universal) later on for the source inspection ( with respect to PO)in qa32 & later on i will proceed. But i want the system to assign the 3 (task list usage) automatically for all the inspection lots, how to enable the same?
regards,
Sanju

Hi
In the SPRO setting for inspection type, you can assign default usage. I am not having system access right now, so cant give you exact path. But approx. QCC0--insp lot creation-maintain insp type/default values for inspection type.
Try if this solves your issue.

Creation of new task in uwl

Hi experts,
We are trying to create new task in Universal worklist.(UWL). But we can't manage or attach the attachments here. It shows the system error. which configurations are needed other than uwl configuration?
Thanks
veeranji

,we would like you to redeploying the uwljwf.sca.
Usually there is no extra config required, check your KM config
The global attachments service is activated in
the KM standard configuration.???
So,we would like you to refer to the following help link to
make sure the service had been configurated firstly.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/ac/
671e405d21c442e10000000a1550b0/frameset.htm
The redeployment of the UWLJWF.SCA will not affect the configuration
and the user data.

Creation of new task in a different TR

Hi All,
I have a modification to be made to a User exit. When I'm trying to change to editable mode, a new task in the default TR (already associated with the user exit) is being created. but I want to create the new task in a different TR.
is there any possibility of changing the TR (charm already associated with the user exit) associated with the user exit to a new TR (new charm)?
Please help...
Thanks & Regards,
SriLalitha

Hi Sri Latha,
There is option to create the TR for same modification.If you are changing the same modification it will create one sub task under main TR.
SO you can change your modification and under old old TR only.Before going to release the TR,
You can create one empty TR include those modifications in new TR.
Thanks for understanding.
BR,
Veeru

Task list timings are not copied to the Productio order

Dear Frndz,
I have created a task list for an item say FGA, where I have mentioned the SETUP Time as 15 Min, MACHINE time as 10 Min and LABOR time as 10 Min.But, when I create a production order for the same item these timing details are getting copied into.Plz give me the reason and solution for this.
Regards,
Srini

Dear Mangal,
AS u said
1.First goto CO02 and enter the prod.order no and click on Read PP Master data and check now
whether are you able to see the values in operation details screen.- YES AM ABLE TO SEE
2.check the routing selection,selection ID,task list type details in OPL8. - i HAVE CHECKED AND IT IS NORMAL
But still it is not working...........I'll give you two more hints to help me out.
1. The production order for the same item with same BOM,same ROUTING and same ORDER TYPE is working fine.
2. The system is using the task list to arrive at the scheduled start time and end time , but only in the operations overveiw tab it is displaying the SETUP duration and PROCESS duration as zero.
Any more ideas mnagal......
Regards,
SRini

Calling fm in new task only when it is possible.

I'm calling a fm in a new task, and I need to check it is possible to open a new task before proceeding.
How can I check the number of open tasks? How can I check the maximum number of tasks allowed?
Thanks in advance.

Hi!
You don't have to check it, it is handled by SAP automatically.
The only requirement, there has to be at least 3 dialog processes in your SAP system.
For this check transaction SM50.
Because startin an FM in a new task is an asyncronous processing, it's result is not important to your program run.
Regards
Tamá

Error M8-688 - Creation of several vendor line items is not possible for document type RN.

Hello All,
We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
Thanks,
Chandu.

I dont think that there is any way because it is a hardcoded error message.
      IF NOT t003-xnetb IS INITIAL.
        MESSAGE e688 WITH pi_rbkpv-blart.
      ENDIF.
SAP is checking the customizing for net/gross posting per document type in table T003
And if it is set up as net, then it is a hard error.

New printer, same ePrint mail, not possible

Hello everyone,
I've recently installed an 8600+ to replace my 6600.
Before uninstalling the 6600 I went on the ePrint portal, change the 6600 mail address, remove it from the portal, deleted it on my computer and finally physically moved from my office
Afterwards I installed the 8600+, set the IP as fixed so I have no problem with the scanner, I've enabled the ePrint functionnality and received a RNG mail so I can add the printed on the web portal, everything is OK.
The problem is that I want to change the ePrint mail address of the 8600+ and came back to the one I had for the 6600, but this is simply not possible, it says that the mail is not available.
Is there a way to solve this problem?
Best regards

Ok, seems the answer were post on other thread at the moment I'm writing mine... Sad to see there is no solution.

Adding to a task list - User does not exist or is not unique

We have SharePoint 2010 with a single web server front end and another server as the SQL server. When trying to add a task to a list or an announcement to a page, users are getting the error, "The user does not exist or is not unique."
I have searched diligently for an answer, but cannot find anything about this with regards to users getting the error.
Thank you in advance for your assistance.

hello,
i have faced your problem few minutes ago. when i was trying to solve another problem
--->> (Object Cache: The super user account utilized by the cache is not configured) --> my current problem
i have found at search results the below PS command to configure super user and super reader.
$w = Get-SPWebApplication http://webapplicationlink
$w.Properties["portalsuperuseraccount"] = "domain account"
$w.Properties["portalsuperreaderaccount"] = "domain account"
$w.Update()
but it caused me another problem which you are facing right now.
---> ( Error: The user does not exist or is not unique)
while adding any item to any list specially lists
then i have tried to rollback by doing the below PS command and it worked and solved it.
$w = Get-SPWebApplication http://webapplicationlink
$w.Properties["portalsuperuseraccount"] = ""
$w.Properties["portalsuperreaderaccount"] = ""
$w.Update()
after that check for the super user and super reader by
Get-SPWebApplication | %{Write-Host "Web Application: " $_.url "`nSuper user: " $_.properties["portalsuperuseraccount"] "`nSuper reader: " $_.properties["portalsuperreaderaccount"] "`n"}
This is the output for the above command should be like this.
Web Application: http://webapplicationlink
Super user:
Super reader:
hope that it helps :)
Karim El Zarka,Senior IT Specialist Commercial International Bank, MCTS Sharepoint

CUNI - Creation of new unit - error Unit is not created in language EN

Dear BI community,
We have created via transaction CUNI a new unit. Everything looks fine - it appears in the unit of measurement and the conversion works.
The problem only occurs when we check it in table T006A by example. When looking for it we get the following error message
"Unit is not created in language EN".
We have tried the "translation" option of CUNI but when we select another from language than EN we get not value.
Any idea?
Thanks,
Rodolphe

Hi All
We have the same issue.
Please let us know how could you fix this issue.
Thanks

Open bookmark results in "new tab". More is not possible!

[]Opening a bookmark or entering a web address does not work.
The result is only: "New tab".
Also opening in the Firefox Help menu results in "New tab".
By clicking on "New tab" nothing happens!

Can't you open any web page or do you only have that problem with bookmarks?
Issues with bookmarks or history not working properly can be caused by a corrupted file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]

Filter not working in new and old task lists (new farm)

I noticed this after migrating some sites from our current production environment. Even when creating a new task list the filter will not work, however if I make a custom list and add the existing Assigned To column, the [Me] filter will work.
This is starting to drive me nuts, any help would be appreciated.

This is a bug in the March 2015 CU. I have an open case on it, where MSFT is able to repro it. This is just a workaround and hopefully the issue will be resolved in the future. It only impacts Tasks lists.
As to doing it to all Task lists, no I'm unsure of how to accomplish that.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Creation of new task list in CharM not possible

Similar Messages

Maybe you are looking for