Defining and activating Non Leading Ledger

Hi!
I am facing problem in assigning company code to non leading ledger, system is giving the message:
Migration service must be used for production company codes
Message no. FAGL_MIG223
The scenario is like below:
Head office is at SIngapore, with common controoling area & operational chart of accounts, for different branches located in different countries.
At present roll outs happened for Vientam and Singapore and these company codes are productive.
I have created new company code for India IN00 and defined non leading ledger called IS and trying to assigning IN00 to this non leading ledger, then system is giving above error.
Actually the note realted to that is once company code is productve and we are activating new GL at later stage, but in my case this is new company code only.
in my opinion, migration appraoch need not be followed in this case.
Please let me know any suggestions?
regs,
ramesh

Hi!
I'm facing similar problem.
The situation is I need to add an additional ledgel for existing company codes.
When I tried to define and active non-ledger, I've got the message no. FAGL_MIG223.
I've read notes (1227504) for scenario 7, but still have no idea how to fixed the problem I've facing.
Please kindly guide me with clear steps.
Appricated.
Edited by: hcgenie on Dec 28, 2010 11:33 AM

Similar Messages

Ledger Group field NOT showing in FB03 after activating Non- Leading ledger

Dear All Experts,
I have activated non leading ledger for my company code and posted the document successfully from FB60. Now coming to FB03 I can see the document in Local Currency and Group Currency - USD but the Ledger Group field still shows complete blank. As I guess it MUST show 1F ( Non Leadig Ledger ) which is my non leading ledger.
Where I missed the configurtation step ? If anybody has gone through the same issue please guide or provide some inputs.
Regards,
Revati Joshi.

Non-leading ledger use t codes FB01L and FB50L
The reason that the Ledger Group 0L is being used it´s because the Accouting Principle of your Valuation Area.
What you have to do is you need to create a new Ledger Group and assgn it to your valutaion area.
Then you assign this accounting principle to the valution area.
Then assign the accounting principle to no Ledger Group.
Please see the customizing path:
Define new Ledger Group:
Financial Accounting (New)>Financial Accounting Global Settings (New)>Ledgers>Ledger>Define Ledgers for General Ledger Accounting (dont active your new ledger as leading ledger. leave the standard as the leading )
Assign Accounting Principle to none New Gl Group:
Financial Accounting (New)>General Ledger Accounting (New)>Periodic Processing>Valuate>Check Assignment of Accounting Principle to Ledger Group
Assign your Valuation Area to the accounting principel just assigned to none NewGL Group:
Financial Accounting (New)>General Ledger Accounting (New)>Periodic Processing>Valuate>Assign Valuation Areas and Accounting Principles
Now you have more then one Ledger Group in you client (which is not being used for nothing) and you have a valuation area that is linked to a Accounting Principle that is linked to no Ledger Group.
Go ahead now and execute the FAGLF101. You will see that the standard will not try to inform leading ledger in the Group of Ledger.
I found this solutiong debbuging the standard. Took me quite a bit to discover.
The problem was in SPRO->Financial Accounting(New)->General Ledger Accounting(New)->Periodic Processing->Valuate->Check Assignment of Accounting Principle to Ledger Group. In "Target Ledger Group" field, the ledger "0L" were configured in BRAP and GAAP. So, the system automatically assigned the ledger "0L" when performing FAGLF101.

Define a new non leading ledger

Hi SAP gurus,
our customer uses sap erp 6.0,
new gl is active but there is only one legder (this is leading ledger 0L) is active. now I want to define a new ledger for IFRS purposes.
are there any special points that should I consider?
should i use new gl migration?
Moderator: Please, search SDN

generally when we upload the opening balance to leading ledger automatically update non leading ledgers based on the accounting rules given at your configuration. but your case after updated opening balance, you have created/activated new non leading ledger, i am not sure just try in development, down load the opening balance from leading ledger and upload the balance to new non leading ledger by select the new ledger group by using BDC or any other program, take your abaper help

Currency to Non Leading Ledger

Friends,
I want ot give the USD currency to my non leading ledger. how should i do that?
Please give me IMG path also.
My co code currency is INR. For my non leading ledger i want to give UDS currency.
Right now posting in non leading ledgers are also in INR which i want in USD.
Thanks & Regards,
Reva.

Hi Reva,
Have You checked this
SPRO--Financial Accounting (New)Financial Accounting Global Settings (New)LedgersLedger--Define and Activate Non-Leading Ledgers
Here if you provide the non leading ledger, it will take you to a screen where you can define the currency for non leading ledger
In this IMG activity, you make the following settings for the non-leading ledgers for each company code:
1) You activate the non-leading ledgers in the company code.
2) You can define additional currencies beyond that of the leading ledger. The first currency of a non-leading ledger is always the currency of the leading ledger (and hence that of the company code). For the second and third currencies of a non-leading ledger, you can only use currency types that you have specified for the leading ledger.
3) You can define a fiscal year variant that differs from that of the leading ledger. If you do not enter a fiscal year variant, the fiscal year variant of the company code is used automatically.
4) You can specify a variant of the posting periods.
Hope this helps
Regards
Pratiksha

Line items posted through the non leading ledger

Hi Sap Experts,
I have activated non leading ledger to which assigned fiscal year variant.
I want to post line items through the non leading ledger.
Can any body please me advise.
Regards,
Prabhakar

HI,
Use the tcode FB50L and FB01L.
It is Ledger group posting without LeadLeadger.
Regards
Madhu M

Report Painter for Non Leading Ledger (Error GH113)

Hi,
Kindly note that we are in the process of enhancing a report for Monthly Balance Sheet as per our client's requirement. The report is based on report painter and we want to add Ledger as an input selection so that the report can be run for Leading Ledger(0L) and for Non Leading ledger(CL)as well .Initially there was no ledger selection and the report ran only for Leading ledger (0L). However when we try to run it for non leading ledger CL it throws an error message GH113 (more than one ledger not allowed in drill down report.)
Our ABAP Consultants have investigated this issue and suggested that for field (RLDNR) ledger the program is picking up "CL" as per input selection , However 0L is also getting captured thereby resulting in conflict and consequently throwing error GH113.
Concern
1) Does this report has a constraint that it can be run only for leading ledger and not for non leading ledger?
2) Apart from report painter form are there any other default setting which extracts "0L" and puts in the report.
Also note that the report painter form settings have been checked thoroughly and ledger has been defined as local variable for input selection.
Thanks

Hi,
Thanks for your quick response. I have already added the ledger as part of report selection and declared it as a local variable so that input selection is possible. but When I select the non leading ledger "CL" and try to execute report it throws error message GH113.
have checked all the settings in report painter form and not too sure as to from where the report is picking up Leading ledger "0L" although as a part of input selection i have selected non leading ledger "CL"
Appreciate your response.
Thanks

Whether Non leading ledger will have copy of Leading ledger transactions?

Hi,
I have basic understanding about leading and non leading ledgers. My question to the forum is whether non leading ledger will have copy of leading ledger transactions meaning whether entries posted from other modules like SD,MM,PP will be available in both leading and non leading ledger or how it will be saved in system. Then if I post any entries only in non leading ledger, for particular set of GL's and If I want to view the GL balances line item wise (with entry posted in non leading ledger) how can i view it.
Regards
Karthikeyan G

Hi karthik,
The postings in different ledgers happen through Ledger groups.
Say you have one Leading ledger - 0L and two non leading Ledgers N1 & N2
In Configuration you define ledger groups
You can have a single 0L Ledger in a ledger group or you can have all the three ledgers in a ledger group
At the time of transaction posting in FI, you have the option to enter ledger group also. If you dont enter any ledger group, then entries will flow in all the ledgers, and if you enter a ledger group where only 0L is included, then it will flow only in 0L and when you use a ledger group where one leading and one non leading ledger is included, it would flow to only two ledgers.
For entries from MM, SD or other modules, you dont have the option of entering ledger groups, so entries will reflect in all ledgers.
Regards,
kavita

Choosing the leading ledger-non-leading ledger

Hi,
I am in a regional project in southamerica. We are goning to use New GL. We are going to have different companies for each country. The chart of account is going to be one which is usefull for all country (it has different group account for each country), we are also going to have a group chart of account for statement balance sheet. We have to report abroad by USGAAP, but locally by other rules. In the distant future we think to use consolidation.
We are going to define the leading ledger and the non leading ledger, but we have the following problems:
-Which one should be the leading ledger (USGAAP or local rules), because I need many reports for two rules.
-What should I consider for this decision?
-In case I choose the USGAAP as leading ledger, what functionality I am going to loose for local report, (inflation, some report, asset accounting (I need more than one depreciation area for local rules and in some countries the functionality of inflation, etc).
Thanks,
Cecilia

Hi,
I suggest to have leading ledger following group GAAP (inyour case US-GAAP, often IFRS). The number of reports does not affect this decision from my point of view as its the same, no matter which ledger is the leading one...
I am not familiar with inflation accounting but using asset accounting with derived depreciation area(s) which post the difference of (real-time) US-GAAP area (posted to all ledgers) and your local depr. area (to the ledger group needed) should work fine.
Set the derived depr. as a "real area" as a derived area does not provide the full (balance sheet) account determination functionality...
best regards, Christian

Choosing the leading ledger- non leading ledger New GL

Hi,
I am in a regional project in southamerica. We are goning to use New GL. We are going to have different companies for each country. The chart of account is going to be one which is usefull for all country (it has different group account for each country), we are also going to have a group chart of account for statement balance sheet. We have to report abroad by USGAAP, but locally by other rules. In the distant future we think to use consolidation.
We are going to define the leading ledger and the non leading ledger, but we have the following problems:
-Which one should be the leading ledger (USGAAP or local rules), because I need many reports for two rules.
-What should I consider for this decision?
-In case I choose the USGAAP as leading ledger, what functionality I am going to loose for local report, (inflation, some report, asset accounting (I need more than one depreciation area for local rules and in some countries the functionality of inflation, etc).
Thanks,
Cecilia
Edited by: Cecilia Penelas on Dec 6, 2010 6:18 PM

Hi,
I suggest to have leading ledger following group GAAP (inyour case US-GAAP, often IFRS). The number of reports does not affect this decision from my point of view as its the same, no matter which ledger is the leading one...
I am not familiar with inflation accounting but using asset accounting with derived depreciation area(s) which post the difference of (real-time) US-GAAP area (posted to all ledgers) and your local depr. area (to the ledger group needed) should work fine.
Set the derived depr. as a "real area" as a derived area does not provide the full (balance sheet) account determination functionality...
best regards, Christian

Preventing posting in leading ledger by closing period in non leading ledge

Is it possible?
I have 24 periods in non leading ledger and want to prevent posting in the leading ledger if the posting period is closed in non leading ledger. Currently when I try to post thru FB50L, for closed period, if I mention the non leading ledger, the document is not posted. But when no ledger group is mentioned. the document is posted in both ledgers.
Thanks for your thoughts on this.
Regards,
SSK

You have to define a separate Fiscal year variant to non leading ledger using with the following path
Financial Accounting (New) > Financial Accounting Global Settings (New) > Ledgers > Ledger > Define and Activate Non-Leading Ledgers
Rgds
Murali. N

Posting in Non leading ledger .

Hi ,
I have posted a document in leading leadger and when I display docuemnt I can see cost centre and profit centre only in Leading ledger docuemnt .
I can can't see any acoount assignment in Non leading ledger why ?
please see attached docment in non leading ledger .

Hi Preeti,
Manikumar has indiated that you assign the scenarios to the Ledgers defined. The following scenarios are available, as you may know :
FIN_CCA
Cost Center Update
FIN_CONS
Preparations for Consolidation
FIN_GSBER
Business Area
FIN_PCA
Profit Center Update
FIN_SEGM
Segment Reporting
FIN_UKV
Cost of Sales Accounting
Whether the assignment is done for the Non-Leading Ledgers? Also include the versions for the Non-Leading Ledgers.
Also do the "Define and Activate Non-Leading Ledgers" step to activate non-leading ledgers for the company code.
Regards,
KBG

Postings to Non Leading Ledger

Hi,
My client requires 3 different non leading ledgers for management reoporting & stauatory reporting along with the leading ledger.
For that i have created 1L,2L & 3L as non leading ledger in the system.
Now the purpose of different ledgers is to pass accountiong entries in 1L, 2L & 3L based on the type of transaction (like Vendor Invoice, Customer Invoice, Vendor Payment, Customer Payment, Downpayment etc).
How can i achieve this?
What are the config required?
How can we control the accounting entries being passed to the different ledgers?
I have explored the SDN forum, i could only find the difference in Leading Ledger and Non Leading Ledger.

Dear Naveen,
Please refer to the following path :
Financial Accounting (New) - Financial Accounting Basic Settings (New) - Ledgers - Ledger - Define and Activate Non-Leading Ledgers.
Regards,
Priyank Manav

Balance Carryforward - Non-Leading Ledger

Hello SAP'ers,
We have 2 ledgers, 1 leading of course with a Fiscal Year of June to May, and one non-leading ledger with a fiscal year of April to March. I can't find any documentation on when to run the balance carryforward program for the non-leading ledger. We have started FY2009 for our non-leading on April 1/ Do I run FAGLGVTR - Balance Carryforward (New), for the non-leading ledger only? I know in June I will run it for the leading. SAPs info is fuzzy regarding the non-leading carryforward process.
Thanks for your help.
JIm

Hello,
I am not sure if I understand quesition correct.
1. Internal order per ledger - this link might give you some information.
FB50L FI-posting to an internal order
You can report internal orders per cost element (acutal and plan)
Use reports in: SAP Menue/ Information Systems/Accounting/Controlling/Reports for Internal Orders/Summarization Reports or/and More Reports
as an instance: S_ALR_87013010
direct output to Excel and drill down functionality for details.
2. GL balances per ledger: use F.08 and select ledger, then you have report per ledger
Let me know if this is what you have expected.
all the best Erwin

Entries on non-leading ledger do not appear in BSEG

Dear experts,
We are running on ECC6 with the parallel ledger option (i.e one leading ledger and one non-leading ledger). When posting directly to the non-leading ledger, table FAGLFLEXA and BKPF are populated but not the table BSEG.
Is there an explanation ? Is it normal ? If not can it be corrected ?
Thank you.
Best Regards,
Steven

Did you scroll further down "Not In Notification Center" and see if it's there?

Posting overhead expenses in country specific Non leading ledger only

Overhead expenses pertaining to the consturction of Fixed assets need to be be capitalised as per Indian Accounting standards. But at the same time according to IFRS standards the Overhead capitalisation is not acceptable. I want to know whether there is any kind of trasaction or customisation to post these overhead expenses such that they appear only in leading ledger and the Non leading ledger of Country specific only and not in IFRS set non leading ledger.

The forum [FPM - General|Enterprise Performance Management (SAP EPM); in which you originally posted your question deals mainly with the financial performance applications otherwise known as Enterprise Performance Management (EPM) carrying the BusinessObjects brand. Your question pertains to SAP [ERP Financials|SAP ERP Financials; which is covered by another forum. Therefore your message has been moved. Please adjust any bookmarks you might have and post to the appropriate area in the future, that way you are assured you will have the right audience reading your posts.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team

Defining and activating Non Leading Ledger

Similar Messages

Maybe you are looking for