Delivery status B and TO status C , Deliver qty and Pick qty are equal

Hi
OBD status is wrong and its coming as Partialy picked for a item however the delivered qty and pick qty are equal. also TO is created and confirmed for delivered qty.
I have checked TO is not pending for confrimation  please advise.

Hi Rahul,
Please check the OSS note
1475784 - Delivery header status is not consistent with item status
Try to run report RVDELSTA  in simulation to check whether system propose any change. if at all you are not getting any positive result from above steps raise an OSS note with SAP

Similar Messages

  • Reg:Copying the Delivered qty to picked qty in delivery(vl01n) transaction

    Hi Experts,
               While creating the delivery i need a user exits to copy the delivery qty to picked qty .
               so that when the user enters in the transaction vl01n the delivery qty and picked qty will be
               same and if any changes in picked qty he will change manually.
    Regards,
    Vikram

    hi,
    these r the total exits for vl01n and i don;t find any exit for this requirement.
    Exit Name           Description
    V02V0001            Sales area determination for stock transport order
    V02V0002            User exit for storage location determination
    V02V0003            User exit for gate + matl staging area determination (headr)
    V02V0004            User Exit for Staging Area Determination (Item)
    V50PSTAT            Delivery: Item Status Calculation
    V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
    V50R0001            Collective processing for delivery creation
    V50R0002            Collective processing for delivery creation
    V50R0004            Calculation of Stock for POs for Shipping Due Date List
    V50S0001            User Exits for Delivery Processing
    V53C0001            Rough workload calculation in time per item
    V53C0002            W&S: RWE enhancement - shipping material type/time slot
    V53W0001            User exits for creating picking waves
    VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)

  • How to update picked qty as delivery qty while creating outbound delivery

    Hi,
    I am using badi definition LE_SHP_DELIVERY_PROC to update delivery qty as picked qty at the time of creating delivery. By using method SAVE_DOCUMENT_PREPARE I am populating delivery qt(yCT_XLIPS- G_LFIMG) to picked qty(CT_XLIPS[1]-PIKMG). and i am also populating update flag as 'I'. after saving the delivery document i am not able to update picked qty which was populated in BADI. could you please suggest anything needs to care. thanks in advance.
    Regards,
    Peranandam

    Hi,
    I did a little test and, within the method CHANGE_DELIVERY_ITEM, itu2019s possible to fill the picking quantity (structure CS_LIPSD) but unfortunately during the save the added information is lost.
    This is because the BAdI method is fired too soon and the routine PICKMENGE_BEARBEITEN (SAPFV50P) is not called at all.
    The problem is quite complex; even after changing the picking quantities, the picking status still remains open!
    The picked quantity is generally filled:
    u2022     by printing the picking list
    u2022     Warehouse Management by creating a transfer order
    u2022     or by manual entry
    Otherwise, it is assumed that picking has not yet been initiated and the result is that picked quantity is ignored.
    In my opinion itu2019s very difficult to solve your problem using only the BAdI implementation.
    I suggest you to propose an alternative solution such as the automatic processing of Picking Output EK00; easy to activate and absolutely standard!!!!!!
    Regards,
    Andrea

  • Picking qty less than Delivery qty alert - Urg

    Hi Guys,
    We have done a configuration for order to cash scenario on ECC6.0 now we have one requirement that if picking quantity less than delivery quantity it should send an alert to customer representative.
    I have few questions below before start up configuration for that process.
    1. How do i configure to the system to send an alert when there is short pick in delivery document? 
    2. When customer representative receives the notification he or she make the necessary changes manually change in delivery document of delivery qty to picking qty.
    3. How do i say the logic to ABAPer to do a coding, I think there is no standard configuration to do that or if it is please write back to me.
    I posted few questions but none of the questions answered to me.
    Please go through and reply me back... Urgent.
    regards
    rc gopi

    Dear Senni.B,
    > I want to enter less picking qty than delivery qty during delivery process.
    As per the standard functionality picking quantity should be equal to the delivery quantity.
    And not advaisable less picking qty than delivery qty during delivery process.
    Can you plse give more details In which scenario you require this functionality and what is the use of that.
    I hope this will help you,
    Regards,
    Murali.

  • Need a report on delivery status and response status for capaign recipients

    hi, i need to make a report on delivery status and response status for capaign recipients but cannot find them in the campaign subject area nor the campaign response subject area, any idea?
    thanks

    Correct the Campaign Response History is the report you are looking for. The fields that may be helpful to you are.
    Response status - This shows message opened, click-thru's, opt outs etc
    Delivery status - Hard bounce, soft bounce etc
    To get more details from the above results add the following.
    Response type - This will show the URL that was clicked on a click-thru in case you have multiple links tracked in one email. It will also show the reason for hard bounces. This is important because not all hard bounces will trigger the "Never Email" flag to be checked. This occurs for emails with the bounce statuses of Bad Address,
    Address Moved or Unknown Address only.

  • Status 51 qty and/or delivery completed ind or final issue ind are missing

    i am using we19 to test an inbound idoc mbgmcr02
    i get status 51 qty and/or delivery completed ind or final issue ind are missing
    i have the quantity filled in.
    so i must need the delivery completed ind or final issue ind filled in.
    i cannot find either or these???can anyone point me to them???
    also on the e1BP2017_gm_code i am using 02.
    can anyone give me a rundown on the valid codes to use here and what they mean

    Hi Janice,
    i saw your posting and we are also having the same issue and when i trie to open the link, it's not opening ' page not found'.
    we are having an issue while moving the stock to vendor maintained stock.
    The scenario is:
    We have an externally processed operation in prod. ord and 2 of the components in the prod.ord are batch managed.( These components can have multiple batches) so when we released the prod.ord, P.Req and PO are getting created automatically. here we have two scenarios:
    1. When we are maintaining single batch for the 2 components and release the prod.ord, every thing works fine i.e. stock is moving to vendor maintained stock i.e 541(o).
    2. The problem is when we are maintaining multiple batches for the same components, the P.req and PO are getting created but stock is not moving to vendor maintained stock i.e 541(o)
    when we debugged it's giving this message: " Qty and / or "delivery completed" ind. or final issue ind. are missing ".
    Do i need to make any settings or am i making any mistake?
    Plz guide me and it will be really helpful if anybody can give some steps to follow.
    Thank you ,
    kanth

  • Product Delivered Status Date should be there in Standard Search and Result screen of Service Order. Product Delivered Time should be Available in Result screen and In Result screen there should be facility to filter on basis of Time

    Hi team,
    Product Delivered Status Date should be there in Standard Search and Result screen of Service Order. Product Delivered Time should be Available in Result screen and In Result screen there should be facility to filter on basis of Time.
    How to add this in search result screen.configuration is it possible? or any changes in development.
    Compnent - BT116S_SRVO
    Thanks
    Kalpana

    Hi Kalpana
    Please reread my comment. I said to try and populate "Requested End" Date.
    Make sure the date profile assigned to the transaction includes this Date Type.
    If you can populate this either manually or programmatically the solution should be quite forward.
    If you cannot do this, only then should you look at making any significant sort of enhancement.
    Regards
    Arden

  • Over delivery of a sales order-status still shows "not delivered"

    Hi Friends
    I have a problem with sales order . Total quantity in order is 10, even then system allows me to make 2 or more deliveries of total with more than 10 quantity .
    Following option I have tested but all in vain.
    1. In copy control at item level ( item category is TAN) document flow box is checked and Pos./neg. quantity column has value "0". If I take here "" then system don't allow me to make partial deliveries i.e 2 deliveries of 5 quantity each. It says " there is no quantity available for delivery or the item is not relevant for delivery.  I can make only one delivery with 10 or less quantity with "" sign
    If I take "O" in Pos./neg. quantity field then it allows me make as many partial delvery with more than 10 quantity, which is wrong
    Order status always shows " No delivery" even if deliveries made and PGI done
    2. In item category checked complition rule field with "A", "B" and "c" option still no effect and document flow shows "being processed "
    Pls let me know whts the problem
    Thanks

    Maintain value + (plus) in the field Pos/Neg quantity at item level in the copy control settings (t.code VTLA). After making the settings, create a new sales order and test.
    Regards,

  • Order and item status in sales order

    We had multiple items in the sales order
    for one of the item, the quantity was 5, but user cretaed a delivery of 8. but she only post goods issue for 5.
    the delivery and order was open
    at this stage the archival of delivery took place.
    we changed the status in tables vbuk and vbup to complete.
    but in the display of status in sales order, it still shows being processed.
    What can we do now to set the order status and item status to COMPLETE.
    Thank you for your reply

    Hi,
    This order status will not be complete unless the delivered quantity is equal to the order quantity. You have 2 options. 1. Change the order quantity to 8 and delliver the rest 3 and the order status will be set to COMPLETE. 2. Otherwise, reverse the PGI in VL09n and delete the delivery and create the delivery again for 5 qty. This will set the order status as COMPLETE.
    Regards,
    Raghav

  • Return Sales Order - And its Status

    Hello Experts,
    I have a question in the sales returns scenario.
    Step 1: I Create a sales order ( With two items and delivery full ) and perform steps till billing ( invoice ).
    Step 2: I Create Return sales order with reference to the first sales order but i take Only one item to return.
    Now the status of the return sales order is Being Processed.
    Step 3: I create a complete ( deliver full quantity of the item ) return delivery with reference to the return sales order and save the document. Now still the return sales order is in status Being Processed. Ideally i should have been Completed.
    Step 4: I do the Goods receipt for the return delivery. Now also the status of the returns sales order is Being Processed instead of Completed
    Kindly suggest any way to control the status of sales document or is this the ideal way( if so what's the functional purpose behind this ? ).
    Is this because the billing block is still set in the Return sales order ?

    Do you mean that only after credit memo creation or clearing of the credit memo from FI the status of return order is set to completed?
    If this is an ideal scenario, in one of our systems the status of return sales order is set to completed immediately after returns delivery creation.
    This behavior is same as that of normal sales order scenario, where the sales order status is set to completed once the delivery happens.
    Kindly suggest, if there is any customizing to control the oeverall status update for specific sales order types or based on the type of sales scenario.

  • Goods Movement and Billing status at header level

    Hello,
    Im new to this topic and have some very basic questions
    Will WBSTK field be updated with goods movement status for a given sales order number in VBUK table ?
    Similarly, will FKSTK/FKSTK or BUCHK will be updated with billing status ?
    I know that for a given delivery document number, I can track the status at the item level.
    But my aim is to know the overall goods movement and billing status at the order header level.
    Any clues will be of great help.
    Thanking you in advance.
    Regards,
    Preethi

    Hi Preethi,
    A sales order does not determine a billing status for delivery related billing, field VBUK-FKSTK is only determined for delivey.
    Just because of this, you will not find billing status field in VA03 -> goto header;
    you could only find billing status field for delivery in VL03N -> status overview.
    Best regards,
    Crystal Lin

  • How to find the status of production order for fully delivered orders

    Hi,
    My question is :
    when an order is confirmed for the end of month(jan) and no Gr is generated in jan then the order will not be included in jan month.
    For this solution given by functional :
    Get fully delivered orders for that period.
    My query's are :
    how to find fully delivered orders, is there any status in Co02 tran?
    Any suggestions for the given query are welcome..with elobration..
    thanks in advance.

    hi,
       The table name for Order status is VBUP and the field name is GBSTA.
    regards,
    Meiy

  • New flex field in "Gender and Marital Status"

    Hi Experts,
    Please Let me Know whether we would be able to add New Flex Field in "Gender and Marital Status" in Manage Person Page,.
    Thanks&Regards
    Prasanna Kesavan

    It sounds like you are trying to add a new value of "Significant Other" to the Marital Status drop down.  If that is what you are trying to do, the list is controlled through the MAR_STATUS lookup.  That Lookup is extensible so you can add new values if you like.
    To update the Lookup, navigate to Setup and Maintenance and query the Manage Common Lookups task.
    Then query the Lookup Type = MAR_STATUS
    From there you will be able to see all of the values available for different countries.
    If the options are greyed out, then you will not be able to alter them because they are delivered with the product.
    However, you have the option to add new values of your own here.
    If you only want to see the value for particular countries, you can add a value in the "Tag" column with the Country Code where the value should be visible (i.e. if the code is only applicable in the US then you would add "+US" in the tags, if the code is applicable everywhere except the US then you could add the tag "-US").
    Hope that is helpful,
    Karla

  • How to find deliverd qty and status ?

    Hi,
       I adviced to make use of follwoing tables VLPMA,VBUK and LIPS, to find deliverd qty and delivery status, i already got set of material number in an internal table, i have to join the above tables to get the values based on internal table.
    I gone thro the tables, but i could't get proper link, experts plz provide same sample code to proceed.
    Thanks and Regards,
    Babu

    Hi,
    For any SO check if any Delivery is created. If no, the SO Qty is open Qty.
    If yes, check the diff in Delivery and SO qty. The diff is open Qty.
    The joining condition is:
    LIPS-VGBEL = VBAP-VBELN and
    LIPS-VGPOS = VBAP-POSNR.
    or
    For each Sales Order Item (VBAP-POSNR) take the ORDER Qty field (VBAP-KWMENG) and substract the Del QTY field(LIPS-LFIMG).
    that gives the Open order Qty.
    or sum up at the order level.
    Sum up all Order Qty's and Del qty's .
    difference gives the open order qty.
    there is no straight field
    reward points for useful answers

  • Consignment delivery status is howing the status being processed

    Dear Guru,
               I would like to know the reason behing showing the status of consignment delivery document as "BEING PROCESSED".
    The scenario is as below:
    as we all know that in consignment sales process there are for steps that we require.The steps are as follow:
    consignment fill-up
    consignement issue
    consignment return
    consignment pick-up.
    In this while going through the consignment fill-up there are two substeps that is required.
    careation of sales order and creation of delivery document and pgi.
    After doing post goods issue when i m seeing the doucment flow i find that the delivery document status is showing as being processed.
    Why?

    Open your delivery document and go to Status tab.  This screen will provide you with the necessary details about which step is not yet done because of which the overall status is being processed.  If you have difficulties in analyzing the status screen, provide me the status values against each status that you see on delivery and i will be more than happy to explain them to you.

Maybe you are looking for