Discoverer 10g does it support clobs
Does discoverer 10g plus support clobs?
I'm in the worksheet editor and I'm trying to add items to the worksheet, if I select a item which has an item of number then try to select a clob item then nothing happens the clob item doesnt move to the selected list. I have to move all my clob items into the selected list first then add the rest of items.
Is this just one of oracle features or are clobs not supported?
Hi,
Clobs are supported. However, you cannot combine a aggregrate with a CLOB so you need to add in the detail of any number items.
It is probably a bug that forces you to add the clob items first.
Rod West
Similar Messages
-
OCS 10g - Does it support multiple domain hosting
Hi,
We have installed OCS 10g for a domain university.edu
Now, It provides only two available domains as local domains. ie, university.edu and .edu
I would like to add some more sub domains (at least one more) such as college.university.edu to be a local domain in OCS for which it should accept emails.
It this simple feature of multiple domain hosting supported in OCS.
Kindly let us know some tips for it.
Many thanks in advance.
maas.I configured the domain about 2 years ago, so I have to go and look in my archive (which is at the office, I will not be there before the end of next week).
The setup has 2 top level domains (one is .nl and one is .com). Under .nl about 4 domains are running, under .com only 1. If I remember corretly issues did raise with files. Calendar and mail are running as expected. This is on a 9.0.4 release though (not a OCS 10 R1 or R2). I did read loads of articles and had to patch even more. Luckily I printed all articles I read, so I can lookup the exect document numbers. If you can wait until next week, I can help you out. -
Does Oracle Database Express Edition 11g support CLOB datatype?
I am having problems in displaying CLOB data type columns when I query my tables in Oracle Database Express Edition 11g. I am getting garbage values. However when I do the exact same thing in the Enterprise Edition I do not have any problems. So I am thinking that the Express Edition does not support CLOB data types due to its size limitations. Am I missing something here?
Hi, and welcome to the OTN forums!
I download a year ago oracle 10g and installed in windows7/64bit.
Now 11g is available. But it says does not work in x64.Well, in fact, 10.2 XE wasn't certified for x64 either, not even for Linux x64...
11.2 XE has a Linux x86_64 release, and there has been an announcement that there'll be a x64 release for Windows as well, but it's not available (yet).
There have been a lot of reports that people got 11.2 XE work on x64 Windows machines as well, with a few tweaks at installation time and/or afterwards...
You'll find tons of posts on that topic when using forum search...
oracle 10g seems to be not available anymore.Right, the official downloads have been removed after all database 10.2 releases fell out of (regular) support.
-Udo
Edited by: Udo on 15.04.2013 21:48 -
Does Discoverer 10g Plus allow uploading of reports from local drives?
Hi ,
Does Discoverer 10g Plus allow uploading of reports from local drives? Or like 4i is this only possible from Desktop Client?
Regards
RamNo, you can't bring in Disco workbooks from a local drive with 10g Plus.
Only from the database and/or scheduled workbooks.
Russ -
Differences between Oracle Discoverer 10g and 11g (EBS & Desktop)
We are in the process of upgrading from Oracle Discoverer 10g testing to Oracle Discoverer 11g.
We have had several requests (from functional users) for documentation that might reflect the changes in this release level. Does anyone have relevant documentation that might help explain what has changed so that they can be better prepared.We are in the process of going from 10 desktop to 11 plus. I do not like it as other end-users I have talked to don't either. In desktop, I could have multiple reports open at one time, move tabs from one report to another so I wouldn't have to rebuild the report again. Also, there are times I have 3 or more sessions of desktop running with multiple reports running in them. In plus, I am limited to one session and one report. That slows down productivity big time. In desktop, exporting crosstabs to excel is more user friendly than plus. For desktop, it will fill in the cells below with the data above it if it changes. In plus, it looks like a pivot table. I have read other posts on how to work around that, but not always functional. Using Dense_Rank() works sometimes depending on how the report is written. IT is researching another way but haven't heard back from the consultants. Or, I will have to modify all my excel files with formulas to do that for me. Also in desktop, I can select all and copy paste the results into excel and all data comes in. The row and column headers, page items and even the title section will paste into excel. Plus only gives you the data, no row or column headers. So I have to export it every time I need the data. I have formatted excel files that all I need to do is copy paste and data flows beautifully. As for organizing and saving reports, desktop is much better. I can save reports out on our network under different folders so I can find them faster by topic. Granted, if that directory is an open one, anyone can change/delete it. In plus, the only advantage of saving it on the database is I can sort and search for reports or users. If you make any changes in plus and then walk away from your desk, plus will shut down after a certain time period. If you didn't save it, you have to start over. Don't know if this is something IT can fix???
As we see it, plus is a step back in technology. I hope someone can change that opinion. Don't know if we are not getting the best support from whoever is working with us (Oracle or 3rd party) or we are missing something???? If so, please share.
Thanks. -
Discoverer 10g installed with Ora Apps 11i on same box
I've worked through the "coexistence restrictions" for Discoverer 10g (9.0.4) and 9iR1 (1.0.2.2.x) which states:
"The following instances of Oracle Application Server 10g (9.0.4) and Oracle9i Application Server Release 1 (1.0.2.2.x) can coexist on the same computer only after Oracle9iAS Discoverer has been shutdown in the Oracle9iAS Release 1 (1.0.2.2.x) Oracle home:
1.0.2.2.x Standard Edition and 9.0.4 Business Intelligence and Forms
1.0.2.2.x Enterprise Edition and 9.0.4 Business Intelligence and Forms
1.0.2.2.x Standard Edition and 9.0.4 Business Intelligence and Forms without OracleAS Infrastructure 10g
1.0.2.2.x Enterprise Edition and 9.0.4 Business Intelligence and Forms without OracleAS Infrastructure 10g"
Does this imply that I can install 11i on a box, permanently shut down Discoverer and then ON THE SAME BOX install 10g Infrastructure and Midtier including Discoverer 10g?
Has anyone worked through this installation and made it work?
ThanksThis IS possible and have now done it with assist from Oracle tech support.
1. Install 64-bit 10.2.0.1 Databse into OraDb_home.
2. Install 32-bit 10.2.0.1 Client (needs Windows ODBC extensions) into OraClient_home.
3. Apply patch 5500954 for 64-bit - this is a Critical Bug patch 8 for 64-bit.
4. Apply patch 5337014 for 32-bit - this is a patchset to upgrade the Client to 10.0.2.0.3.
5. Contrary to what Oracle note 334528.1 says (which is to patch the 64-bit Server, you must patch/upgrade the 32-bit client as well (otherwise, it still fails).
Also, DataDirect's Connect Ver 5.2 ODBC Oracle "wire-driver" (32-bit version) will work without installing the OraClient at all.
- Will -
Discoverer Reports does not work in Multi-org Environment after R12 Upgrade
Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava ChunduriHi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava -
Hi
We're in the process of upgrading from Discoverer 4 (APPS EUL) to 10G. We're doing away with the Desktop client. Most users will be given access to Discoverer Viewer and other users will be given access to Plus. We have recently upgraded or DEV instance and there are a few "questions" (i.e. gripes) that users have come back to me with:
1) Do all reports have to be stored on the database to allow them to be accessed by Plus or Viewer? Can only the 10G client version open files from a local hardrive or shared network drive?
2) Can only one report be open at any given time with Plus or Viewer? In client it is possible to have 2 reports open at the same time to facilitate easier comparisons.
3) NULL values are still showing the word "NULL" even though in Tools Options we have set it to show blank, existing reports are still using the NULL value.
I'd very much appreciate feedback on any of the 3 points above.
Thanks.
Paul.Hi paul,
Its a good idea to upgrade from 4i to 10g 4i is no more used by many and their are some issues or bugs with it.The latest version is 11g which has been released 1 week back.If not go with 10g version available.
1) Do all reports have to be stored on the database to allow them to be accessed by Plus or Viewer? Can only the 10G client version open files from a local hardrive or shared network drive?Yes they have to stored in the database so any ened user can access them from plus or viewer.
Can only one report be open at any given time with Plus or Viewer? In client it is possible to have 2 reports open at the same time to facilitate easier comparisons.Yes,if the reports are registered as different reports and if the end user has access to both the reports thn he can open and compare it OR if both reports are in same workbook as different sheets than its easy to view or compare.
NULL values are still showing the word "NULL" even though in Tools Options we have set it to show blank, existing reports are still using the NULL value.It should show blank,might be some problem.In discoverer 10g i think you will not find this issues.
Hope this helps you.
Best Wishes,
kranthi. -
How to delete a workbook in Discoverer 10g
Hello guys,
Does anyone know how to delete a workbook from Discoverer 10g? I created a report in Discoverer Plus as SYSADMIN and gave this to my user. My user only has access to Discoverer Viewer. He went and did a "Save As" on this report. Now when he loggs in to Viewer again, he sees two report. One created by SYSADMIN and the on he created. I want to delete the one he created. How do I go about doing this? Can I do it from Discoverer? If so, which one(Viewer or Plus)? Will I have to login as him to do this? Please advise.Hi,
I'm sorry for the question but you said:
You just login as the user into viewer and delete the workbookWhere do you see the option to delete from the viewer ?
To delete/ manage workbooks you need to login to either Plus or Desktop versions.
And yes you need to log in using the owner user name
Tamir -
Xdb_installation_trigger does not support object creation of type SNAPSHOT
hi everyone, i'm using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit on solaris sparc 5.10
we like to send an email through SSL, and after searching here and there I found out that oracle DB 11g able to go throught the SSL.
since upgrade our DB to 11g would not be an option, so i tried to export XDB of 11g and import it into XDB 10gR2 schema, it was a mess...
then i just reinstall XDB using catnoqm.sql & catqm.sql
and now one of our programmer cant run some script like above
CREATE MATERIALIZED VIEW FIFSYS_MKT_SCHEME_MV_COY
TABLESPACE MARKETING_TABLES
PCTUSED 40
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
FREELISTS 1
FREELIST GROUPS 1
BUFFER_POOL DEFAULT
+)+
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
BUILD IMMEDIATE
REFRESH FORCE ON DEMAND
WITH PRIMARY KEY
AS
+/* Formatted on 9/23/2010 1:07:42 PM (QP5 v5.114.809.3010) */+
SELECT coy_id,
appl_branch_id,
appl_object_code,
product_type,
ppdcf_paid_date,
SUM (scheme_adm) scheme_adm,
SUM (appl_unit) appl_unit,
SYSDATE mkt_sysdate
FROM (SELECT NVL (a.coy_id, '01') coy_id,
a.branch_id appl_branch_id,
DECODE (a.buss_unit, 'NMC', '2101', 'UMC', '2102', '2352')
appl_object_code,
a.platform product_type,
TRUNC (c.contract_active_date) ppdcf_paid_date,
NVL (s.ms_amt, 0) scheme_adm,
NVL (o.total_item, 0) appl_unit
FROM ordmgmt.om_trn_appl_ms_lvl_object s,
ordmgmt.om_trn_appl_hdr a,
acctmgmt.ar_trn_sum_contracts c,
+( SELECT appl_no, COUNT ( * ) total_item+
FROM ordmgmt.om_trn_appl_object
GROUP BY appl_no) o
WHERE s.appl_no = a.appl_no
AND a.appl_no = o.appl_no
AND s.ms_code IN ('MS03', 'MS14')
AND c.appl_no = a.appl_no
AND c.contract_no = a.contract_no
+/*AND c.office_code = a.branch_id*/+
AND NVL (a.coy_id, '01') = NVL (c.coy_id, '01'))
GROUP BY coy_id,
appl_branch_id,
appl_object_code,
product_type,
ppdcf_paid_date;
COMMENT ON MATERIALIZED VIEW FIFSYS_MKT_SCHEME_MV_COY IS 'snapshot table for snapshot MARKETING.FIFSYS_MKT_SCHEME_MV_COY';
and this error shown:
ORA-00604 error occurred at recursive SQL level 1
ORA-20000 Trigger xdb_installation_trigger does not support object creation of type SNAPSHOT
ORA-06512 at line 32
maybe some of you know how to solve this problem??
and, this in the script of the xdb_installation_trigger
DROP TRIGGER SYS.XDB_INSTALLATION_TRIGGER;
CREATE OR REPLACE TRIGGER SYS.xdb_installation_trigger
BEFORE
CREATE ON DATABASE
DECLARE
sql_text varchar2(200);
val number;
BEGIN
if (dictionary_obj_owner != 'XDB') then
if (dictionary_obj_type = 'FUNCTION' or
dictionary_obj_type = 'INDEX' or
dictionary_obj_type = 'PACKAGE' or
dictionary_obj_type = 'PACKAGE BODY' or
dictionary_obj_type = 'PROCEDURE' or
dictionary_obj_type = 'SYNONYM' or
dictionary_obj_type = 'TABLE' or
dictionary_obj_type = 'TABLESPACE' or
dictionary_obj_type = 'TYPE' or
dictionary_obj_type = 'VIEW' or
dictionary_obj_type = 'USER'
+)then+
if (dictionary_obj_type != 'PACKAGE BODY'
+) then+
sql_text := 'select count(*) from ALL_OBJECTS where owner = :1 and object_name = :2 and object_type = :3';
execute immediate sql_text into val using dictionary_obj_owner, dictionary_obj_name, dictionary_obj_type;
if (val = 0) then
sql_text := 'select count(*) from dropped_xdb_instll_tab where owner = :1 and object_name = :2 and object_type = :3';
execute immediate sql_text into val using dictionary_obj_owner, dictionary_obj_name, dictionary_obj_type;
if (val = 0) then
insert into xdb_installation_tab values
+(dictionary_obj_owner, dictionary_obj_name, dictionary_obj_type);+
end if;
end if;
end if;
else
raise_application_error(-20000, 'Trigger xdb_installation_trigger does not support object creation of type '||dictionary_obj_type);
end if;
end if;
end;
+/+
/********************************************************************************/i'm so careless, after checking a fresh installation of the same version DB, i dont found xdb_installation_trigger.
so just by simply remove that trigger & everything works just fine. :) -
Apple TV 3 does not support the Microsoft Wedge Mobile Bluetooth Keyboard
Apple TV (3. Generation) still (17.02.2013) does not support the Microsoft Wedge Mobiloe Keyboard. I bought it especially for use with Apple TV but it doesn't work. Apple TV finds the keyboard with the exact name but can not connect. No 4 digit code appears that you can type in to your keyboard to compelete the connecting process and after a few seconds "connections fails" appears.
Now i dont't know if i should send it back to amazon to get back my money or keep it and wait until it maybe will work some day... I red from articles from beginning of january 2013 that a new Version of Apple TV is in the Pipeline (3.2) and that it has an other bluetooth chip. The same as in the iphone 5 that works with the MS wedge keyboard. So i really don't know if i should wait for the next few updates of my Apple TV or wait for a new Apple TV hardware- Update... Telephone calls with apple and microsoft doesn't brought useful results. Restore function of Apple TV doesn't work.
I hate that Apple always brew their own soup... Bluetooth is know for an easy connection to ALL devices but Apple TV supports only a hand full of keyboards. **** S**t!!!!!!!!!!!! -.-Hi
This is the solution from Microsoft website. Work fine (don´t forget press and hold Fn key!!):
Connecting the Wedge Mobile Keyboard to a tablet PC
By default, the Bluetooth Wedge Mobile Keyboard pairs with most tablet PCs through secure simple pairing (SSP) with a passkey. Some tablets, however, may not support SSP well with a passkey.
In order to successfully pair your Wedge Mobile Keyboard to such a tablet, use the following alternative pairing mode.
Pair your keyboard through SSP without a passkey
Press and hold the Fn key at the same time as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on the top of the keyboard will blink green and red alternately. This means that your keyboard is discoverable to your tablet within 6 minutes.
On your tablet PC, from the Start menu, select Control Panel, and in Category view, locate Hardware and Sound.
Select Add a device.
When the keyboard is listed, select it, and follow the instructions to successfully pair your Wedge Keyboard with your tablet.
Note
If you want to pair your keyboard with a tablet or other computer that supports SSP with a passkey, press and hold the Connect button only. -
Some Calculations are not working in Discoverer 10g after upgrade from 4.1
Hi Gurus,
We are recently upgraded Oracle Discovere 10g from 4.1, some calculations are not working in Discoverer 10g. I appreciate if you could fix below calculation(s) in 10g.
CASE WHEN TRUNC("Expenditure Item Month") = '31-JAN2007' THEN SUM(Wtd Qty A) WHEN TRUNC("Expenditure Item Month") = '28-FEB-2007' THEN SUM(Wtd Qty A) WHEN TRUNC("Expenditure Item Month") = '31-MAR-2007' THEN SUM(Wtd Qty A) END
Thanks & Regards
VikramSabra,
Not sure exactly what this might be... there could be an issue there.
Please make sure that you review the upgrade.log. Are there any errors / warnings?
Also, you might wanna peek the Metalink Note:262623.1 - Master Note for OracleAS Portal Upgrade Issues, where you'll find some nice things where to start looking at.
Later you may wanna open a Service Request into the Oracle Support.
I hope it helps...
Cheers,
Pedro. -
Discoverer 10g and Java 7- Anyone Document Incompatibilities
Hi All,
To provide a clearer picture to my IT steering committee, I am documenting Discoverer 10g / Java 7 incompatibilities. As a company we are on Java 6 because of our Oracle Apps 12.1.3 implementation (we are not ready yet to make the jump to Java 7 on the apps side).
Anyways, I have done some documentation of issues associated with Java 7 and Discoverer 10g, but I wanted to know if others have done some documentation.
Here is my short list:
-Can not enter text in the "name contains:" field associated with the "Open Workbook from Database" dialog box.
-Can not edit column headings while editing workbooks.
Any other issues people have noticed would be helpful. I need to build a case for migrating to Discoverer 11g (which is compatible with Java 7).
Thanks,
PatrickM. Schroeder,
Thanks for sharing your situation.
Of course, trying to use Java 6 on the Discoverer Application Server side and Java 7 on the client side with Plus does not seem/sound like the smartest thing for us to being doing. Certainly, this is not certified.
Our intentions are to eventually migrate to OBIEE with OBIA, but a migration will be a large project and take some time. There is hope that nothing needs to be done and everything will be okay in the interim.
Patrick -
Oracle Discoverer 10g desktop edition Release 2 (10.1.2.0.0)
hi,
Does anyone know where i can find out the documentation or tutorial about oracle discoverer 10g desktop edition?
any hits are welcome
thanks and regards
lingAnd some more useful links:
BI on Oracle: http://www.oracle.com/bi/
BI on OTN : http://www.oracle.com/technology/products/bi/
Discoverer : http://www.oracle.com/technology/products/discoverer/
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples : http://www.oracle.com/technology/products/bi/samples/
BI Software : http://www.oracle.com/technology/software/products/ias/devuse.html
Thanks
Abhinav
Oracle Business Intelligence Product Management
Blog : http://oraclebi.blogspot.com/ -
Migration from 9i to 11g Transparent Gateway results in a) ORA-12704: character set mismatch b) ORA-02070: database ... does not support SYS_OP_C2C in this context
What Transparent Gateway (TG) 11g configuration steps prevent the following errors?:
a) ORA-12704: character set mismatch
b) ORA-02070: database <DB_link_name> does not support SYS_OP_C2C in this context
Hints:
The current 9i TG works with the existing views and packages. These same db objects will not compile using the new 11g TG.
The db objects are on an Oracle 10g database linked to an SQL Server 2008 R2 database.
Since the 9i TG works I assume a configuration to the 11g TG will get it working same as before. But what...
Is is something controlled by these parameters? (Sorry, I don't know how this stuff works. I'm the application developer. My DBAs setup the Transparent Gateways.):
Parameters in the Gateway Startup Shell script:
ORA_NLS33
NLS_LANG
Parameters in the initsid.ora file:
HS_LANGUAGE
HS_NLS_DATE_FORMAT
HS_NLS_DATE_LANGUAGE
I'm avoiding the known workaround to refactor the VIEWS and PACKAGES to contain CAST() statements to explicitly match the data types. A server side fix to the 11g TG is preferred.
Sample code:
a) ORA-12704: character set mismatch
... is caused by SQL that works with my 9i TG but not with my 11g TG. It's a snippit from my view that won't compile:
select status_code -- Oracle VARCHAR2(30)
from ora_app_interfaces
UNION
select "StatusCode" as status_code -- SQL Server NVARCHAR(30)
from SqlAppInterfaces
Example workaround that I'm avoiding:
select status_code
from ora_app_interfaces
UNION
select CAST("StatusCode" as VARCHAR(30)) as status_code
from SqlAppInterfaces
b) ORA-02070: database <DB_link_name> does not support SYS_OP_C2C in this context
A line of code in the procedure that compiles correctly but fails to execute:
-- Insert into SQL Server from Oracle
insert into PatientMedRecNum (
"PatID", -- SQL Server INT
"MedRecNum", -- SQL Server NVARCHAR(11)
"Hospital") -- SQL Server NVARCHAR(30)
values (
pi_pat_id, -- Oracle NUMBER
pi_med_rec_num, -- Oracle VARCHAR2
pi_hospital); -- Oracle VARCHAR2
I'd guess the errors are caused by the TG's implicit conversion between the Oracle VARCHAR2 and the SQL Server NVARCHAR... but this works fine on the 9i TG... how do I set it up to work on the 11g TG?
Thanks!Trace of 11g TG... generating errors due to lack of automatic mapping from SQL NVARCHAR to Oracle NVARCHAR, where the previous 9g TG mapped from SQL NVARCHAR to Oracle VARCHAR2.
Oracle Corporation --- MONDAY SEP 22 2014 13:35:08.186
Heterogeneous Agent Release
11.2.0.4.0
Oracle Corporation --- MONDAY SEP 22 2014 13:35:08.186
Version 11.2.0.4.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "UCS2"
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "FALSE"
setting HS_FDS_SUPPORT_STATISTICS to default of "TRUE"
setting HS_FDS_QUOTE_IDENTIFIER to default of "TRUE"
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
setting HS_FDS_ARRAY_EXEC to default of "TRUE"
Exiting hgosdip, rc=0
ORACLE_SID is "xxxDEV"
Product-Info:
Port Rls/Upd:4/0 PrdStat:0
Agent:Oracle Database Gateway for MSSQL
Facility:hsa
Class:MSSQL, ClassVsn:11.2.0.4.0_0019, Instance:xxxDEV
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=1000
HOCXU_DB_CSET=178
HS_LANGUAGE not specified
rc=1239980 attempting to get LANG environment variable.
HOCXU_SEM_VER=102000
Entered hgolofn at 2014/09/22-13:35:08
RC=-1 from HOSGIP for "PATH"
Setting PATH to "C:\oracle\product\11.2.0\tg_2\dg4msql\driver\lib"
Exiting hgolofn, rc=0 at 2014/09/22-13:35:08
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
treat_SQLLEN_as_compiled = 1
Exiting hgoinit, rc=0 at 2014/09/22-13:35:08
Entered hgolgon at 2014/09/22-13:35:08
reco:0, name:abaccess, tflag:0
Entered hgosuec at 2014/09/22-13:35:08
uencoding=UTF16
Entered shgosuec at 2014/09/22-13:35:08
Exiting shgosuec, rc=0 at 2014/09/22-13:35:08
shgosuec() returned rc=0
Exiting hgosuec, rc=0 at 2014/09/22-13:35:08
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
HOSGIP for "HS_FDS_DEFAULT_OWNER" returned "dbo"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2014/09/22-13:35:08
HS_FDS_CONNECT_INFO = "sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2014/09/22-13:35:08
dsn: sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV, name:xxx_admin
optn:
Entered hgocip at 2014/09/22-13:35:08
dsn:sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV
Exiting hgocip, rc=0 at 2014/09/22-13:35:08
Entered shgogohn at 2014/09/22-13:35:08
ohn is 'OraGtw11g_home2'
Exiting shgogohn, rc=0 at 2014/09/22-13:35:08
RC=-1 from HOSGIP for "HS_FDS_ENCRYPT_SESSION"
using 0 as default value for "HS_FDS_ENCRYPT_SESSION"
RC=-1 from HOSGIP for "HS_FDS_VALIDATE_SERVER_CERT"
using 1 as default value for "HS_FDS_VALIDATE_SERVER_CERT"
Entered hgocont_OracleCsidToIANA at 2014/09/22-13:35:08
Returning 2252
Exiting hgocont_OracleCsidToIANA at 2014/09/22-13:35:08
Exiting hgogenconstr, rc=0 at 2014/09/22-13:35:08
Entered hgopoer at 2014/09/22-13:35:08
hgopoer, line 231: got native error 5701 and sqlstate 01000; message follows...
[Oracle][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Changed database context to 'Xxx_XXX_DEV'. {01000,NativeErr = 5701}[Oracle][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Changed language setting to us_english. {01000,NativeErr = 5703}
Exiting hgopoer, rc=0 at 2014/09/22-13:35:08
hgocont, line 2764: calling SqlDriverConnect got sqlstate 01000
Entered hgolosf at 2014/09/22-13:35:08
Exiting hgolosf, rc=0 at 2014/09/22-13:35:08
DriverName:HGmsss23.dll, DriverVer:07.01.0093 (B0098, U0065)
DBMS Name:Microsoft SQL Server, DBMS Version:10.00.2531
Exiting hgocont, rc=0 at 2014/09/22-13:35:08 with error ptr FILE:hgocont.c LINE:2764 ID:SQLDriverConnect
SQLGetInfo returns Y for SQL_CATALOG_NAME
SQLGetInfo returns 128 for SQL_MAX_CATALOG_NAME_LEN
Exiting hgolgon, rc=0 at 2014/09/22-13:35:08
Entered hgoulcp at 2014/09/22-13:35:08
Entered hgowlst at 2014/09/22-13:35:08
Exiting hgowlst, rc=1 at 2014/09/22-13:35:08
SQLGetInfo returns Y for SQL_PROCEDURES
SQLGetInfo returns 0x1f for SQL_OWNER_USAGE
TXN Capable:2, Isolation Option:0xf
SQLGetInfo returns 128 for SQL_MAX_SCHEMA_NAME_LEN
SQLGetInfo returns 128 for SQL_MAX_TABLE_NAME_LEN
SQLGetInfo returns 134 for SQL_MAX_PROCEDURE_NAME_LEN
HOSGIP returned value of "TRUE" for HS_FDS_QUOTE_IDENTIFIER
SQLGetInfo returns " (0x22) for SQL_IDENTIFIER_QUOTE_CHAR
13 instance capabilities will be uploaded
capno:1992, context:0x0001ffff, add-info: 0
capno:3042, context:0x00000000, add-info: 0, translation:"42"
capno:3047, context:0x00000000, add-info: 0, translation:"57"
capno:3049, context:0x00000000, add-info: 0, translation:"59"
capno:3050, context:0x00000000, add-info: 0, translation:"60"
capno:3066, context:0x00000000, add-info: 0
capno:3067, context:0x00000000, add-info: 0
capno:3068, context:0x00000000, add-info: 0
capno:3069, context:0x00000000, add-info: 0
capno:3500, context:0x00000001, add-info: 91, translation:"42"
capno:3501, context:0x00000001, add-info: 93, translation:"57"
capno:3502, context:0x00000001, add-info: 107, translation:"59"
capno:3503, context:0x00000001, add-info: 110, translation:"60"
Exiting hgoulcp, rc=0 at 2014/09/22-13:35:08
Entered hgouldt at 2014/09/22-13:35:08
NO instance DD translations were uploaded
Exiting hgouldt, rc=0 at 2014/09/22-13:35:08
Entered hgobegn at 2014/09/22-13:35:08
tflag:0 , initial:1
hoi:0x12ee18, ttid (len 32) is ...
xxx
xxx
tbid (len 10) is ...
0: 09000F00 0FAC1E00 010A [..........]
Exiting hgobegn, rc=0 at 2014/09/22-13:35:08
Entered hgodtab at 2014/09/22-13:35:08
count:1
table: XXX_INTERFACE
Allocate hoada[0] @ 0000000005F58270
Entered hgopcda at 2014/09/22-13:35:08
Column:1(InterfaceID): dtype:2 (NUMERIC), prc/scl:20/0, nullbl:0, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:2(TableName): dtype:-9 (WVARCHAR), prc/scl:30/0, nullbl:0, octet:60, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:3(TableID): dtype:4 (INTEGER), prc/scl:10/0, nullbl:0, octet:0, sign:1, radix:10
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:4(StatusCode): dtype:-9 (WVARCHAR), prc/scl:30/0, nullbl:0, octet:60, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:5(StatusTimestamp): dtype:93 (TIMESTAMP), prc/scl:23/3, nullbl:0, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
Entered hgopcda at 2014/09/22-13:35:08
Column:6(InterfaceLog): dtype:-9 (WVARCHAR), prc/scl:400/0, nullbl:1, octet:800, sign:1, radix:0
Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
The hoada for table XXX_INTERFACE follows...
hgodtab, line 1073: Printing hoada @ 0000000005F58270
MAX:6, ACTUAL:6, BRC:1, WHT=6 (TABLE_DESCRIBE)
hoadaMOD bit-values found (0x40:TREAT_AS_NCHAR,0x400:UNICODE_COLUMN)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
3 DECIMAL N 22 22 20/ 0 0 0 0 InterfaceID
12 VARCHAR N 60 60 128/ 30 1000 0 440 TableName
4 INTEGER N 4 4 0/ 0 0 0 0 TableID
12 VARCHAR N 60 60 128/ 30 1000 0 440 StatusCode
91 DATE N 16 16 0/ 0 0 0 0 StatusTimestamp
12 VARCHAR Y 800 800 129/144 1000 0 440 InterfaceLog
Exiting hgodtab, rc=0 at 2014/09/22-13:35:08
Entered hgodafr, cursor id 0 at 2014/09/22-13:35:08
Free hoada @ 0000000005F58270
Exiting hgodafr, rc=0 at 2014/09/22-13:35:08
Entered hgotcis at 2014/09/22-13:35:08
Calling SQLStatistics for XXX_INTERFACE
IndexType=SQL_TABLE_STAT: cardinality=0
IndexType=1: PK_XXX_Interface
IndexType=3: IX_TableID
IndexType=3: IX_TableName
Calling SQLColumns for dbo.SQL_app_INTERFACE
#1 Column "InterfaceID": dtype=2, colsize=20, decdig=0, char_octet_length=0, cumulative avg row len=15
#2 Column "TableName": dtype=-9, colsize=30, decdig=0, char_octet_length=60, cumulative avg row len=60
#3 Column "TableID": dtype=4, colsize=10, decdig=0, char_octet_length=0, cumulative avg row len=64
#4 Column "StatusCode": dtype=-9, colsize=30, decdig=0, char_octet_length=60, cumulative avg row len=109
#5 Column "StatusTimestamp": dtype=93, colsize=23, decdig=3, char_octet_length=0, cumulative avg row len=125
#6 Column "InterfaceLog": dtype=-9, colsize=400, decdig=0, char_octet_length=800, cumulative avg row len=725
3 Index(es) found:
Index: PK_XXX_Interface, type=1, ASCENDING, UNIQUE, cardinality=0
#1 Column 1: InterfaceID
Index: IX_TableID, type=3, ASCENDING, NON-UNIQUE, cardinality=0
#1 Column 3: TableID
Index: IX_TableName, type=3, ASCENDING, NON-UNIQUE, cardinality=0
#1 Column 2: TableName
Exiting hgotcis, rc=0 at 2014/09/22-13:35:08
Maybe you are looking for
-
Aftger I upgraded to Yosemite I cannot see my iMac at home from my work (i.e in Finder window under shared devices). Note both my work and home iMac are connected to time capsules and I can see both of those time capsules but I cannot see either iMa
-
Like 4 years ago i bought some TV shows. That computer is long gone. Is there any way for me to download them again?
-
Hi I've got a new site to do where I need to scroll up and down a fishing rod. I have found a golf club site where they section the club into sections and when you click on a section it shoots to that part of the club. The site is http://www.taylorma
-
Have created an iweb site, and want to use my domain name currently held at 123-Reg on the site. Have followed instructions, but there appears to be 2 fields to input data one which is @ and the 'www' - I have the info to put in the 'www' field which
-
Best way to access JNDI configured DataSource from outside container
I'm not sure if this is the right forum category, but it seemed like a good place to start. I have a DB2 database on an OS/390 mainframe that is configured as a JNDI datasource in WebSphere (WSAD) 5.1.x. I can get connections and do database transact