Distribute breaks for shift schedule

please i need some help, i have an employee shift schedule, that need to distribute the daily breaks within each interval shift but as per some conditions,
as shown,I need fill “IN” at the interval cells that match its beside shift,
From Row 14; each row considered an employee shift, in need to give every agent 1 hour as a break
the build conditions:
>> every agent must take 3 breaks the first: 15 minuts, the 2nd: 30 minuts, the last 15 minuts.
>> we couldn't give a break at the first and the last hour at employee shift.
>> at agent level: the duration between every break shouldn't less than 1 hour and shouldn't more than 3 hours,
>> at interval level: at each interval break, the slots will be distributed as per SLA value at Row#:"10", change as per the given slots. The SLA value is a percentage value, i need the give breaks at the highest SLA value till this value equal
the next lowest value then give slots to the next lowest value till equal the next lowest ect..., i need this operation to be looped till every employee take his 3 breaks as per the above conditions.
the workbook
appreciate any support, help to get an answer, thanks in advance,
Gratefully,

Hi Ahmed,
I have looked into the workbook, it is very complex. Could you split your requirement into several questions so that it will be easier for us to understand?
>> every agent must take 3 breaks the first: 15 minuts, the 2nd: 30 minuts, the last 15 minuts.
For this requirement, I think you could define a variable BreakCount, before you set the cell as break, you could check the value of the BreakCount, if it is less that 4, you could set the value of BreakCount +1. If it is larger than 4, break, and go
to next. If you have any other conditions, you could add the if statement before you set the cell as break.
Hope it will help.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Similar Messages

GR Date for Delivery Schedule line

Vendor On-Time Delivery Report
We have vendor On-Time Delivery report requirement, where we rate the
goods-delivery of a vendor as "On-Time" or "Early" or "Late". The
rating is given based on the difference between "Statistical Delivery
date" and "GR date" (in the PO/Scheduling Agreement).
In case of Scheduling Agreement (SA) we have to give delivery rating
for each Delivery Schedule Line - Based on the difference
between "Statistical Delivery date" and "GR date"
The Goods Receipt is done at Schedule line item level and not at
Delivery Schedule Item level, the GR date is not populated at Delivery
Schedule Line level and we are not able to find the GR date for each
Delivery Schedule Line.
Once we get the "GR date" at SA Delivery Schedule line level, then from
the difference between this date and "Statistical Delivery" date, we
can rate the delivery of vendor as "On-Time" or "Early" or "Late".
Is there any way that we can populate/get the GR date (GR creation date) for each delivery
schedule line?
Thanks in advance.

Hi Rahul,
I am working on the same requirement. Appreciate ur help on the same. The notes helps in understanding how quantities are distributed while GR. did u implemented any logic for this distribution or something else to compare the dates. I believe by checking the open quantity (EKET) (scheduled - GR quantity) we can see if there is open quantity for any schedule for the previous day then tht falls under the delayed quantity and if there is zero open quantity, it is on time delivery.
thnx,
Upender

Delivered quantity for each schedule line

Hi,
Our scenario is that we have an order for each order's each item we can have multiple schedule lines, when any of the schedule line is delivered the delivered quantity colum is updated, the schedule lines table in VBEP but the thing is it doesnot have the delivered quantity, system calculates it at runtime or may be it is keeping it in some other table.
I hope some body can help in this regard.
Thanks
Khusro Habib

It is a calculated value, not a value of a table field. Also, it may lead to wrong results if you don't pay attention to this description of the field here under in bold.
Delivered quantity in sales units
The quantity from the schedule line that has already
been delivered.
Use
When there is more than one schedule line for an item,
the system distributes the total delivered quantity for
the item across the schedule lines according to the
sequence of their delivery.
Example
A sales order item has three schedule lines, each with
an order quantity of 50 pieces. You make two subsequent
deliveries: the first for 20 pieces, the second for 60
pieces. The delivered quantity for the first schedule
line is 50 pieces, for the second 30 pieces, and for the
third zero.
If you delete the first delivery (20 pieces), the
delivered quantity for this schedule line is still 50
pieces. However, the system reduces the delivered
quantity for the second schedule line to 10 pieces.

CC is a deal-breaker for me. I'm off to look for similar software. Skip

CC is a deal-breaker for me. I'm off to look for similar software. Skip

First, let me freely and proudly confess. I do not use Adobe products to earn my living. I'm a retired military guy within six months of qualifying for social security. I'm not likely to matter in anyway within Adobe's marketing schemes.
I started using Photoshop way back on Windows 3. I started using Indesign when Quark was the darling of printing shops. I switched to Dreamweaver after less than happy experiences with competing software . . . and HTML5 wasn't even a blip in the common imagination. Now, I own Creative Suite Master Collection 6.
Many of us purchased Adobe software which they abandoned within a year or two or three. That's on us. Didn't think Creative Suites would be another one. That's on me.
I'm an economic non-entity. I know that. I use Adobe software, when the opportunity arises, to support nonprofits.
Whether or not I switch--is that an upgrade?--to "Creative Cloud" doesn't matter.
The writing was on the wall when Adobe stopped publishing print manuals. They must have eliminated a host of printing and distribution costs with that move. Now, they seem to have eliminated the cost of publishing and distributing DVDs. Sound move . . . from a CFO's point of view, I would think.
Doesn't mean I won't switch/upgrade to the "Creative Cloud." Since I normally upgrade at the issue of each new version, I'm still weighing the benefits/cost to an old guy who goes back almost to Photoshop 1.0. I just don't buy the hype that Adobe implements this model for the benefit of all their old and potential customers.
I just don't know.
Maybe I'll try it out for a year. Or, not.

Regarding shift schedule

Hi all experts.
I hv a querry regarding the shift schedule.. i hv various shift schedule.like shift A- 6am-2pm, shift B- 2pm-10pm, shift C - 10pm-6am, shift D- 8am-5pm etc.. now i want a new shift schedule for e.g. shift E- shift Ashift B, *shift F- shift A shift C*.. can this be possible? if yes, kindly guide me how it will be done.
Thanx n Regards,
S.Kumar

Yes it is possible. You can add these additional shifts in the DWS and assign it to the existing personnel subarea groupings fpr Work schedule and DWS or may be the different grouping as per the requirement.
Then create PWS using the new shifts in the table V_T551A, assign public holiday calendar and generate work schedule rules in the table V_T508A.
Can u be a bit more clear on your requirement so that the personnel subarea groupings can be decided?

Load from Setup tables breaking for high volume

Hello Friends,
There are around 50,000 records in the setup table for 03 related appl area. The load is breaking for 50,000 records in BW. But it works if I further select only one day data in the BW scheduler.
Why is this?
Immediate help is appreciated.
Regards,
Simmi

Hello gurus,
So, I tried reducing the packet size to 20,000 and no of Idocs to 10 per Infopckage. But this is working for only 40K records which a just a weeks data for the 2LIS_03_BF extractor.
If I run 30 days worth of load form setup tables for the same etxractor, the load is breaking.
The same is happening for a customer built Zextractor. For this I actually tried with 10,000 records and 5 IDOCS per package.
Does, this mean for sure that there is a memory issue?
Also, I see that all the BGD WPs have been occupied by other jobs. Is this an issue?
But we have deltas running every night from R3, but t hese are less volumes(<10,000)and we have not seen this issue.
However within BW there are heavy loads between data targets and they don't break.
Is this a issue only for full loads from R3?
Appreciate your immediate response.
Thanks
Simmi
Edited by: simmi on Jun 20, 2008 1:39 AM

Time Evaluation for work schedule during midnight

Dear all SAP HR Expert,
We have question regarding time evaluation.
Our scenario is:
Shift 1 00:00 - 07:00
Shift 2 07:00 - 16:00
Shift 3 16:00 - 24:00
His work schedule:
06.08.2010: Shift 2
07.08.2010: Day Off (Free)
08.08.2010: Shift 1
09.08.2010: Shift 1
10.08.2010: Shift 1, but he took one day annual leave on this day
Actual data (in IT2011 and IT2001):
clock in 06:30 of 06.08.2010
clock out 16:30 of 06.08.2010
clock in 23:30 of 07.08.2010 (come earlier)
clock out 07:30 of 08.08.2010
clock in 00:35 of 09.08.2010 (late)
clock out 07:15 of 09.08.2010
leave record: start date: 10.08.2010, edn date: 10.08.2010
Base on SAP documentation that said we can never assign a time event before midnight to the next day, we have rearranged SAP configuration (DWS and PWS) to:
DWS:
Shift 1: 23:59 - 06:59 with tolerance 23:59 - 00:00 and 06:59 - 07:00
PWS:
For Shift 1, always set 1 day earlier than actual schedule.
Thus, work schedule rule will indicate:
06.08.2010: Shift 2
07.08.2010: Shift 1 23:59 - 06:59
08.08.2010: Shift 1 23:59 - 06:59
09.08.2010: Shift 1 23:59 - 06:59
It works!!
Our problem is, time eval can not find clock in - clock out record for date 09.08.2010 (because record in IT2011 with date 09.08.2010 belongs to 08.08.2010) and can not match it with leave record (because leave data has start date 10.08.2010).
Thus, time eval will generate warning message "Employee not at work".
I hope you can give me input on how to solve this problem.
Best Regrads,
Achmad

Hi,
see thread
Time evaluation -early clockin for shifts starting at midnight ?
maybe of interest
bg
Edited by: bg on Sep 16, 2010 9:26 AM

Shift Schedule

Every month major departments are making shift schedule for the month in hard copy and sending to HR to upload in SAP. Any changes also are done by HR. Now it is proposed to maintain the shift schedule to be done directly in SAP by the concerned department and changes to be done by HR. It should not change the leave already maintained from before.
Please help me with the steps how to do it.

This is called ManPower Planning.
I guess there is no such concept, but we do have Shift Planning concept in Time Mangement.
But for this, we need to have REquirement Profiles, Job descriptions, etc mandatory to maintain.
this is a very tedious task, and i dunno to what extent it will match ur requirements.
Its suggested, not to bring that into SAP.
Lets C if any one has any prior experience n better views on this.
Regards
...Sadhu

How to Set Time Period for KM Scheduler

Hi ,
I have created one Par based application in which i have assigned one role to perticular id dynamically and i scheduled this task by using KM Scheduler. but this scheduler assigns this task for 1 mins or greater than 1 hrs. i wanted to run this task for every 10 mins or 20mins or 30 mins. actually i tried to edit the time table property for KM Scheduler for 10 mins but it not works it take 1 hrs and 10 mins.
so is there any way to edit this time table property and set scheduler time to 10 mins or 20 mins.
Kind Regards,
Rahul

Hi Rahul,
If you want to run the scheduler for every 10 minutes, you can create your own timetable and assign it in the scheduler tasks.
Steps:
Goto Sytem Admin -> System Config -> Knowledge Management -> Content Management -> Global Services -> Scheduler Time Table -> Time Table -> Click on New
You can find Scheduler Time Table in advanced options.
Specify the vales as mentioned below and save it:
ID: <any ID as you want>
Minute : 10
Time Zone : GMT+05:30 (Asia/Calcutta) India Standard Time
For other parameters, no need to specify any value.
Then go to Global Services -> Scheduler Tasks -> Your Scheduler Component -> Select the new timetable you have created for timetable parameter and click OK
I have specified timezone as IST time. You can change the time zone as you require.I have done this and its working for me.
Hope this helps.
PS:Reward points for useful answers
Regards,
Yoga
Edited by: Yogalakshmi on Feb 27, 2008 6:14 AM

Error "Unable to load word breaker for locale 0. Error code 8007007e." with search service application.

I recreate the Search service application and the default Content source stayning in the 'Recovering' status.
The log give multiple error 'Unable to load word breaker for locale 0. Error code 8007007e.'
The default language is English and the reference in registry for word breaker dll is naturallanguage1.dll but I found only the naturallanguage6.dll.

Hi,
For your issue, check your current language settings and ensure that search supports the current language.
On the SharePoint Server open Registry Editor (Start -> type “Regedit” and hit enter).
Point to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OfficeServer\14.0\Search\Setup\ContentIndexCommon\LanguageResources\Default\English
Under the registry key for each of the languages there is a value called StemmerDLLPath and WBDLLPathOverride
Updated the registry entry with NATURA~1.dll to NATURA~2.dll
Point to Start -> Administrative Tools -> Services, right click on SharePoint Server Search 14 and click on Restart.
Performed a Full Crawl and wait for the Full Crawl to complete and try searching again.
For more detailed information, refer to the following blogs:
http://blog.ithinksharepoint.com/2008/04/20/a-word-breaker-was-not-found-for-the-given-language-error-when-crawling-content/
http://www.sharepoint2013.me/Blog/Post/175/Word-breakers-in-SharePoint-2013
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Frustrating time to find the Solution Manager add-on for CPS Scheduling.

I have spent a couple hours looking through my maintenance optimizer and the software download site.
The problem is that I cannot seem to find the plug in anywhere. I have found posts pointing to different locations but each one has been a dry hole for me.
So here are the questions
1) Does the SolMan Add on for CPS scheduling cost ? I believe it is ST_PSM
2) Where is it on the download site?
Thanks
George

ST_PSM is not part of the "normal" Solution Manager license, it must be licensed separately. If you don't have that license you won't see the it in the Download Center.
Check
Note 1109650 - SAP Solution Manager 7.0 Extension Addon's (which contains the correct paths in Download center)
Note 1122497 - Process scheduling for SAP Solution Manager
Markus

How to create diferents deliveries for each schedule line

Dear gurus,
I have sales orders with many schedule lines in order to deliver in diferents dates. We need to create all the deliveries together but each schedule line needs to be in a diferent delivery with the corresponding delivery date.
I analiced the customizing about pool for delivery creation (VL10) but all I can change is for display and can not change the way the delivery is created. If we select two schedule line with diferent dates, the proccess create only one delivery with the total quantity and the first date of delivery.
Anybody knows some way to make the proccess create individual deliveries from diferents schedule lines?
Tanks in advance!
Marina.

Hello Marina
I hope you are using VL10E. Did you try working with Delivery creation date (range) and Delivery Date calculation rule? For example if you go for a value of 2 for the CalcRuleDefltDlvCrDt ('Rule for determining default value for deliv. creation date), then system will consider only those sched lines which are to be delivered today and tomorrow.
You also have the possibility of setting up your own routine for CalcRuleDefltDlvCrDt.
Thirdly SAP has suggested a solution for Scheduling agreements ( valid for releases upto 4.7). In this SAP has suggested solution 4 for ensuring all schedule lines are not delivered together. You can customize the code to include Sales orders ( in stead of Sched Agreements) in your case. Though it is for release 4.7, I think you can use the smae concept in ECC also.
137937 - SD scheduling agreement: Delivery split for each schedule li
Check it out and let me know how it goes. Good luck.

I want to order multiple copies of an iPhoto book I have already purchased once. Is there a price break for multiple copies? Also, can I send to multiple addresses?

I want to order multiple copies of an iBook I have already purchased. I have two questions:
1) Can I send them to multiple addresses?
2) Is there a price break for multiple copies?

1) No.
2) No.

How do I create a table that breaks for new pages?

I'm running Pages 5.5.1 on OS X Yosemite 10.10.1 and am having difficulty understanding table behavior.
Scenario 1 - I create a new file and insert a table at the top of the first (blank) page. It automatically is selected for Object Placement>Move With Text. If I add rows to this table, Pages automatically adds a new page and breaks the table so that additional cells appear on the new page. All well and good. If I change the Object Placement to Stay on Page, the second page and those cells disappear.
Scenario 2 - I create a file and first add a few lines to the top of the first page. Then, I insert a table below those lines. It is also automatically selected for Object Placement>Move With Text. When I add rows, the table does not break for the second page, but the entire table jumps to the second page. If I change the Object Placement to Stay on Page, I can then slide the table back onto page one, but as in Scenario 1 the portion of the table which would continue onto page two disappears.
So, how do I create a table that I can add to a page which is not blank (as in Scenario 2) which will break automatically onto page 2 instead of jumping, and so the rows appear on page two (not disappear as I describe above)?
Thank you for your help.

The inline table is supposed to break but like most things Pages 5 it is buggy and erratic in its behavior.
Use Pages '09.
Peter

Page break for a category group of a chart - SSRS 2008 R2

Hi,
I need to add a page break for one of two category groups of a my chart. Is it possible, please?
I need to create a chart for this category group to mantain readable the report.
Thanks

Hi There
You can create two graphs and put them inside two separate rectangles and add page break
after first rectangle and add a filter to your chart for first category group for first chart and second category group for second chart.
This is best you can do
If you have any question please let me know.
Many Thanks
Syed Qazafi Anjum
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.

Distribute breaks for shift schedule

Similar Messages

Maybe you are looking for