DMS Object Link at Maintenence Order and Service order level

Hi SAP Gurus,
We had a requirement for maintaining DMS Object at Service order and maintenence order level, as Standard DMS does not provide any Standard Object link at Order level, we went for development and following the Standard procedure i could bring the Order Tab in CV01N Object Links, and also i could search the relavent maintenence order and maintain documents relevant to it,
But the biggest problem now is i could not create DIR from the Maintenence or service order screen IW31, and the document i have placed at the order is not visible in the order screen at all,
i know it is some sort of enhancement in the Order screen to allow DMS Documents to appear in the Order screen to provide this funtionality.
let me pls know what exactly has to be done, as there is no config at the order level to get the DMS Screen, as DMS is not a standard object at the order level.
one approch as suggested is modifiying the Order screen or using Screen Exit Enhancement for Order but not sure which one to use or how to move ahead,
Thanks n Regards
Priya S

Dear Christoph Hopf
Many Thanks for your answer,
i went through the said SAP Note, but it only speaks about the notifications level, where SAP itself has provided the standard DMS Object links, and iam in latest ECC-6 version where this note is taken care of i think,
iam looking for creating DMS Document (DIR) from the maintenence Order IW31 transaction screen, and have developed new Object link for Maintenence order,
but the main problem is, iam not able to create DIR from the IW31 Screen directly as Maintennce order is not a standard SAP Object,
please let me know how to get the list of documents that i have attached to a maintenence order to appear in the IW32 maintenence order screen, and also we need to create the documents (DIR) directly from IW31 / 32 screens.
Thanks and Regards,
PriyaS
Edited by: Priya S on Aug 19, 2009 1:50 AM
Edited by: Priya S on Aug 20, 2009 1:54 AM
Edited by: Priya S on Aug 24, 2009 6:24 PM

Similar Messages

Difference between sales order and service order?

Hi Gurus
Whatu2019s the Difference between sales order and service order?
Thanks.
Kumar

Check below help link for defination and difference in Sales and Service order.
http://help.sap.com/saphelp_crm70/helpdata/en/17/99fb62928c46c28c10f3ebc52fdfa8/frameset.htm
http://help.sap.com/saphelp_crm70/helpdata/en/ce/6874bcf29742c395c5e5fae19a0c68/frameset.htm

Difference between Project call off order and Service order

Hi,can anyone please explain to me the
Difference between Project call off order and Service order
Thanks,
SS

Hi SS.
Please post your query to Project System (PS forum for getting quicker answers.
/community [original link is broken]
Yuo may please close this thread.
Regards
Datta

Plant Maintenance order and service order

Hi ,
Please let me know When we come Plant Main order and Service order.
Thanks

hi:
Customer Service is linked to Plant Maintenance module of SAP. Technically speaking SM/CS isn't a module. Primarily it uses parts of the PM and SD modules.
The PM module is used mainly for eqiopment, functional location, order, notifications, maintenance plans, etc (same as PM).
The SD module is used for billing, contracts, sales orders, etc.
The main interface between the PM and SD module is called Resource Related Billing (DP80, DP90, etc).
The Customer Service have a lot of process one of them is:
Create the notification IW51 -> create de Service Order -> create Quotation DP80 -> Modification Service Order IW32 Accept the Quotation once accept the system create automatic the sales order to copy of quotation -> and billing the sales order VF01.
Other process is:
Create the Notification IW51 -> create de Sales order -> and billing the sales order VF01.
Other Process is:
Create the notification IW51 -> create de Service Order -> create the sales order DP90 -> and billing the sales order VF01.
Other Process is:
Create a contract type WV VA41 -> create de Service Order -> create the sales order DP90 -> and billing the sales order or contract VF01.
Or
Create a sales order RA or RAS VA02 -> create de Service Order -> create the sales order DP90 -> and billing the sales order or contract VF01
Regards
Shashi

Problem with sales order and Service order

Dear Guru's
We have a real problem with sales orders and service orders and how we treat these. For a project that uses a WBS, it's not a problem to manipulate SAP to give us a list of shortages (orders with no or limited supply) for each order, but for some reason our after sales orders and our service orders do not work this way.
Thanks and Regards,
Deethya.

CLOSED

Difference between Frame order and service order

Hello guys,
Can anybody tell me the difference between the Frame order and work order in system point of view?
Which are the steps for doing the

Hi Sam,
Framework order: -
Purchasing document used to procure materials or external services. Instead of stipulating a specific delivery date, this type of purchase order has an extended validity period.
Framework orders are defined via the document type FO. They are used in accelerated procurement processes in connection with maintenance/ servicing plans or invoicing plans, and for blanket purchase orders (purchase orders with limits).
A framework order covers multiple procurement transactions over a longer period in cases where the administrative costs of processing discrete POs would be disproportionately high.
Services Order: -
Used as a means of documenting service and customer service activities
in Logistics - General (LO),, Order comes to
Describes a task which is to be carried out within a company.
The order specifies:
    - which task is to be carried out
    - when the task is to be carried out
    - what is needed to carry out the task
    - how the order costs are to be settled
Regards,
Shyamal

Diff. between Sales order and Service order

Hi Gurus,
Can anybody tell me what is the diff. between sales and service order? What are the customization settings will be different for the sales and service order?
Thanks in advance

Hi Devi,
Both are two different scenarios. But both are transactions having different purpose.
Sales order comes to the picture when ever any product or service are going to sale. Service order comes to the picture either after sales order processing, when ever any damage happened to the product or replacement required or in order to return the product. or Service sales scenario.
For Configuration settings please refer the Best Practices Configuration guides.
If any clarification please revert...
Reward if it helps
Johnny.

Repiar and Service Order

Can someone please explain step by step procedure involved in dealing Repair Orders and Service Orders from customers.
I understand it is integrated with Sales and Distribution but please explain simple terms and transaction flow and key parameters and master data involved. Thanks in advance

Hi,
[Repair & Service Orders|http://help.sap.com/saphelp_46c/helpdata/en/e6/4a8df09e0311d189b70000e829fbbd/frameset.htm]
Regards,
Maheswaran.

How service order and sales order are linked to Service notification

Hi I want to link a specific service order type and a specific sales order type to a service notification how to do that. Please help me out

The sales order to service order link is also there in table AUFK
AUFK-KDAUF (sales order number)
Sales order
Also check document flow of the sales order for the item in question:
If the item is a a service item then

Service Order and Sales Order Integration

Hi All,
Through the requirement class settings in customizing, I have managed to generate a service order in the background upon creation of sales order.
To achieve this I have maintained the following settings:
Order type = OR
Sales document item category TAD
- Item Cat TAD is linked to Requirements Type SERA (SD IMG->Determination Of Requirement Types Using Transaction)
-- Requirements Type SERA is linked to Requirements Class 203 (SD IMG->Define Requirements Types)
--- Requirements Class 203 is lined to order type SM01 (SD IMG->Define Requirements Classes)
I have also maintained my service material 'ZPBK001' in OISD screen. So, system allows me to create a sales order for this service material and service order is generated in the background.
However, my requirement is to not to generate service order in the background but just create a sales order. Then manually create a service order and also manually enter the sales order as an SDI settlement object in the service order.
So to achieve this, if I remove the service material from OISD screen, then system doesn't generates service order in the background but gives an Information (not an error or warning) message saying:
No entry for plant 1200, service object 01 ZPBK001 in table T399A
Its only an information message and when I tick it as ok then system gives another information mesage saying:
Error when processing Service order
So the result is service order is not generated in the background which is fine as per my requirement because I can manually create a service order and then manually enter the sales order in the service order.
However, during the creation of sales order, is there a way that I dont get these information messages regarding service order not being generated in the background?

Hi Pete,
Thank you for your reply. As per your suggestion I have removed the "Transfer of requirements" check from SD IMG->Define Requirements Classes. However, when I create a sales order, system still gives me the pop-up Information message saying:
No entry for plant 1200, service object 01 ZPBK001 in table T399A which is because I have not maintained service material in OISD screen.
Also, I get the information message as:
Error when processing Service order
The first information message regarding service material is ok. However, is there a setting that I can maintain that I dont get the second message regarding error when processing service order?
I also checked item category details in VOV7, there is no settings for transfer of requirements in vov7

Add New Object in a DMS Object Link

Hi everybody,
i am trying to create an object link to Service Entry Sheet. (tcode: ML81N, ESSR-LBLNI)
by sap instructions i did this step:
"You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140 .
The processing logic must follow that of screen 1204 in program SAPLVC130."
and this step:
Create function module OBJECT_CHECK_XXXX (XXXX = ESSR ) which i have copied from OBJECT_CHECK_EQUI .
I have done above step .
I created Screen For SAPLCV130 and SAPLCV140 with screen No 1272. give same flow logic of screen 1204.
I created Function Module OBJECT_CHECK_ESSR.
After this What I have to do for displaying ESSR object in DMS as Object Link.
Please Guide me as soon as possible.
Thanks
Pranesh

Hi,
Since I think you already followed the below steps :
1. In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140. The processing logic must follow that of screen 1204 in program SAPLVC130.
2. Create function module OBJECT_CHECK_XXXX (XXXX = object name) If the object can be classified, this function module already exists .
Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
Kindly go through the below once :
Link :[http://help.sap.com/erp2005_ehp_02/helpdata/en/2c/3fe93bad3ce333e10000000a114084/frameset.htm].
you define the object link in DMS customizing
e.g.For EBAN maintain screen number 247 in "Maintain view for screens to DMS object links" Then link EBAN to your document type
Hope it helps you.
Thanks
Arbind
Edited by: Arbind Prasad on Feb 24, 2011 5:46 PM

Contract , scheduling agreement and service order

Hi all,
Can anybody tell me about the contract scheduling agreement and when we can suggest our client to go for schedule or contract agreement ?
Pls tell me elaborately .
Also Pls explain me about service order and when can i go for service order . whether it is restricted to AMC ?
Pls explain me elaborately.
pls explain me steps for creating contract or scheduling agreement and service order..........................
points to be rewarded.
Regards,
Girish.

Hi,
Contract is outline purchasing agreement where you have a contract with the vendor,may be a for a predetermined quantity or predefined value. So everytime you need the matl, you need to make PO ref the contract asking for the delivery of the matl. In such instance when PO is ref with contract its called contract release orders or call off orders. So Process are ME01, ME11, ME31K with aggnrement type, ME51,ME21 & MIGO,
Scheduling agreement is a long term purchase agreement, where you will keep issuing the delivery schedules whenever there is a change in requirement or at predetermined time intervals. The delivery schedule can be on hour/daily/weekly/monthly basis. SA is also an agreement with the vendor for the supply of matl, may be a quanity or value. The delivery dates will be maintained in ME38 ref the SA which are called delivery schedules.So you can maintain the delivery schedule and communicate the vendor on Forecase basis or JIT basis. And when you need some more matl then will only create SA deliveries using ME38. SA could be of 2 types:- without release documentation-system will transmit the delivery info to the vendor once you save the document.
With release documentation- after creating the delivery schedules you need to create SA release using ME84.So Process are ME01, ME11, ME31K with aggnrement type, ME38 & MIGO,
Service order or service PO is created with item Category "D" and an account assignment category as per ur requirement. U can not enter ur material here only u have to maintain short text of material. Example: You want to clean the boiler and u given contract to your Vendor. Vendor sends quotation mentioning that Rs.100/hr/Man head. Now how you will measure the cleaning activities of furnace? You can pay to contractor based on the hourly basis/ man head spent in cleaning activities. So in this case create the Purchase Order mentioning "Cleaning" in the short text in Item overview(Acc assignment ' K' or C or P and Item category 'D) and item details " Man Head" Service No , Gross price - Rs.100.00 and unit - hour ( or pick from Service master) and Quantity-number of hours spent by all man head.
The steps to create Service PO are:
1) Maintain Item Category as D & account assignment such as cost center Kor slaes orderC
2) Keep material code field blank.
3) Enter description of service & other fields in the PO Item Overview level. Press Enter.
4) System will prompt you to maintain services at Item Level. Maintain your service master number / service description & other fields (quantity / rate /)
5) Save the PO.
For more follow the links;
For more follow the link;
http://esoadocu.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/render.asp?packageid=DBBB6D8AA3B382F191E0000F20F64781&id=EB65A89F1AFD4C46AB61C6161BAF
http://www.sap-img.com/sap-sd/sap-sd-scheduling-agreement-vs-contract.htm
http://www.copacustomhelp.state.pa.us/infopak/nav/procurement/contracting/file1499/index.htm
http://www.sap-img.com/materials/what-is-outline-and-scheduling-agreement.htm
Regards,
Biju K

Replicate Service order and sales order

Dear All,
I need the objects that responsible to replicate service order and sales order
and what is the steps to apply these steps
please, ASAP

Good afternoon,
I presume you are looking for the adapter objects? For business transactions this is BUS_TRANS_MSG.
Kind regards,
Vanessa

Service prod in service contract and service order thro RRB!

Hi,
I have service contract with service product say Rep_service with 1 Hr rate as 100 USD in place for a particular equipment with serial number.
I have received a complaint now I am raising a service order SM01 service order with contract
I have maintained the same equipment number in the Service order as in service contract
and selected the service contract too.
i have operations and material consumption for service order.
When I run DP90 RRB the material determined is Service (different service product) based on my DIP profile, (should I maintain the same service product in DIP profile as in service contract or any other service prod can be maintained). What happens to this billing document generated from DP90?
And my service order settles to service contract.
I think when service contract is in place then to generate billing I will use only service contract as reference.
Please suggest me how to go about it.
Kindly if possible give me some link to documents.
Regards,
N.Nagaraju

Hi Nagaraju,
First of all, you can bill Service Contract and Service Order differently. This is because you may wish to charge contract fees irrespective of whether service occurs or not.
Secondly, while maintaining DIP profile, you can use different material from the one used in contract. Just make sure that it gives explanation as to what service was performed so that customer will understand the invoice.
DP90 will generate Debit memo request. You will need to create billing document against this using VF01.
When you settle the service order (KO88), it will be settled against service contract.
Please let me know if you need any further information.
Regards,
Aaditya.

DMS Object Link for SRM

Dear All,
Can you please provide me the object link for SRM( Inbound Delivery).
Our team requirenment we should need to integrate with SRM through DMS (object link)
So provide me the solution?
Thanks
Edited by: RS on Aug 26, 2010 1:14 PM

Hi RS,
Kindly follow following steps. Add the new object in DMS object link and DMS screen on new object screen with help of Abap'r.
This can be achived with help of Abap'r and following steps:
Purpose
You can also link documents with SAP objects for which no linking is supported in the standard SAP System.
Prerequisites
In Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data  Maintain key fields.
Process
1. Program two screens for the following module pools for the SAP object that is to be linked additionally:
u2013 SAPLCV00
u2013 SAPLCVIN
The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
2. Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
Result
After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see: Object Links).
Regards,
Ravindra

DMS Object Link at Maintenence Order and Service order level

Similar Messages

Maybe you are looking for