Document Type restirction by company code

Hi All
We have a scenario where they are different companies with a group company and DMS is installed in all companies under single client
While defining Document types, one group company should not be able to view the Document type of another..
We can give authorisation based on Document types, but they dont even want to see the Doc, type name of the other company while using search option..
How is the possible?
Can we differentiate Doc types by company code ?? so that only Doc types specific for one particular company only will be reflected while using F4 , Search option??
Please suggest
Regards
Aby

Hi,
There are many authorization objects like C_DRAW_TCD, C_DRAW_TCS, C_DRAW_STA & C_DRAW_DOK, which might be helpful in your case.
Regards
Surjit

Similar Messages

FI Number Range Number by Document Type -- different by company code

In transaction OBA7, I assign a number range number (T003-NUMKR) to each FI Document Type.
We have over 40 company codes on SAP. One of those 40 company codes requires sequential numbering of FI documents for the whole company code across all document types. The other company codes require different FI number ranges based upon document type.
I need to identify a solution where I can assign a different number range number by document type for different company codes.
For instance, company code IT01 should use a single number range number for all FI documents -- i.e. RV, SA, AB, etc. Then, all other company codes should use a different number range number for each document type.
Any ideas here? My problem company code is in Italy where our accountants tell us all FI Documents must be sequential, without gaps.

Hi Colin,
 The point is that it is about journals
 Sales Journal = Doc type RV
 Cash Sales Journal = Doc Type DR or have RV&DR use the same number range.
 For clearing you will have to create new doc types eg.
 AB = GL Clearing
 KB = Creditor clearing
 DB = Debitor clearing
The existing companies will also have to use these since these defaults are set in customising, but you have clearly defined Journals that comply with the requirements
It is probable that you will need additional doc types,to ensure compliance. In my case all creditor invoices used Doc type KR/KG (SAP Standard and they use the same number range), for the Italian company i then had:-
 KR/KG = Domestic Purchase Journal
 New Doc Type = EU Purchase Journal
 etc.
Kind regards

Different Document types under one company code

Hi All,
I am working on a project where i have to implement SAP PS in 3 Company codes.
I have a requirement that Different number ranges should be used in different codes for creating PRs.
In OPTT,order category 20 is used with NB,here i can change 1 Document type.Is it possible in std SAP to create different Order cat for 20 and then we can link diff document types for diff order cat of type 20.
Regards
Muzamil

Hi,
The assignment of the PR document type in Account assignment is only one is possible you cant assign multiple document type here.
The Automatic PR raised from the PS is only one assignment is possible,so you can inform your MM consultant to create the seperate document type say ex ZNB-- PR for the Project which is common for all the three company code & assign this with the PR assignment in account assignmet filed.
Regards,
Raj

Tax code optional in document type for one company code

Hello experts,
Is it possible to make tax code optional in a document type only for one company code. If yes kindly explain me the process in detail.
Regards,
P.Krishna Chaitanya.

Hi
If I understand your requirement correctly that for a particular document type, the line item should not contain a tax code, while for other Document Types, it should have a tax code. Note, the logic for making tax code optional/mandatory is made through the field tax category in the GL Master and not through the field status. further Build in a validation rule, using a logic as follow:
BKPF-BLART IN "SET NAME"
Check BSEG-MSKWZ<> ' '
Set an Error message
You can also create a subsitituion rule for populating tax code with a blank value if a particular doc type is used.
BKPF-BLART in 'SET NAME"
Substitute BSEG-MSKWZ= ' '
You may need to allow tax code as a field to be substituted in the maintainence view of table GB01 using T Code SM30 for boolean class 9
Regards
Sanil

Default Value for Order Type based on Company Code in ME21N

Hi,
Using ME21N, I want to make the PO type defaulted to a certain company code, say for instance Company code XYZ should have a PO type XYZ Purchase Order, ..company ABC should have a PO type ABC Purchase Order, and so on...I'm just puzzled how to implement it. I know that we can set a Default value for PO Headers in Personal Settings but its doesnt give the result I want coz it will only have one Default Value. What I wanted is when a certain company code is chosen, automatically, the corresponding PO type for that Company code will be displayed in the Order Type drop-down menu (so there's no need to choose on the drop down list what Order type) Is this possible in ABAP? Hope i made myself clear.
Thanks in Advance.

Use BADI IF IF_EX_ME_PROCESS_PO_CUST - method OPEN
View the interface documentation in transaction SE19 and you will see the method OPEN can be used :
2. Opening of a purchase order (OPEN method)
The system opens a new document to create, change or display a purchase order. With the OPEN method,
you can import your own data and prepare it for further processing.
This is available in 4.7 Enterprise but not sure how far back.....
hope this helps
Colin.

Exchange Rate type Assignment to Company Code

Hi,
I'm working on the implementation of a new company code on a SAP R/3 4.6c release. I've created a new exchange rate type EURH (with transaction OC47) and I would like to know hot to assign it to my new Company Code.
Is there a specifc standard transaction? Could you please suggest me a possible solution.
Thanks!

Hi
Exchange rate type you cannot assign to a company code. Where as you can specify explicitly while document entry.
By default in SAP for a new company code system will use 'M' rate as standard. If you want to replce this exachange rate type with your new exchange rate type then goto SPRO --> General Settings --> Currencies --> Define transilation ratios for currency translation
Maintain new exchange rate type as Alt.ERT against 'M' rate then system will take new exchange rate instead of 'M' rate. Otherwise as I said earlier, you can use created exchange rate type in any company code by specifying in document entry or payment program, or you even can assign ex.rate type to a Document type, etc.,
Hope above helps.
Regards
Siva
Message was edited by:
Siva Satyanarayana

Asking to use a valid document type for inter company

Hi friends
We have created a purchase order. It is STO inter-Co
There is no issue for a normal vendor when posting; the error is just for inter-company vendors.
When doing MIGO the document shows OK. When posting or saving the document it is showing an error as Use a valid document type for inter company.
Can anyone help me on this issue?

Hi
This problem raised If the trading partner assigned in the Vendor master in Control data and that trading partner is different fromt the trading partner assigned to particualr Co code.
Goto TCODE:OBA7 , selec the document type for which this error is coming - in the document type screen in control postings sections select the inter-company postings check box.
VVR

FU 065:-Document belongs to cross company- code transaction(error massage)

Hi expert,
I am going to reverse a document (after resetting through LSMW,useing -F.80 as for mass reversal) and getting a error massage below(this document has been generated after F110)
FU 065:-Document belongs to cross company- code transaction(error massage)
Please advise me how can I reverse this document and also advise me what does it mean,
Will it be done by FBU8? (But when I am using it,showing two documents what does it mean and advise should I select both document for reversal)
Please advise
Thanks & Regards

Hi
Thanks for your quick advise,
I am trying to do that through FBU8 but I am getting there two documents numbere inside for reversal (it contained two documents)
Should I reverse both documents or I should select one one only
Please advise why it is showing two documents inside
Thanks & Regards

Asking to maintain a valid document type for inter company

Hi friends
We have created a purchase order. It is STO inter-Co
There is no issue for a normal vendor when posting in MIGO; the error is just for inter-company vendors.
When doing MIGO the document shows OK. When posting or saving the document it is showing an error as Use a valid document type for inter company.
As per the error we have maintained the document types in OBA7 and the inter company posting are checked for the document types.
Can anyone help me on this issue how to proceed?

hI SUKANYA
PLS EXPLAIN ME WHILE GL A/C CREATION FOR WE ASSIGNED G067 AND READY FOR A/C INPUT IS FOR WHAT
CAN U PLS EXPLAIN ITS USES . MEE ANSWER KOSAM WAIT CHESTUNTAA
THANKS
MALLIKARJUNA

Multiple dispute case types for one company code

Hi Experts
I am trying to design a solution for external system interfacing with SAP FSCM. Requirement is to create dispute cases for short pays automatically using program FDM_AUTO_CREATE (which is normal standard SAP process). We are also creating complaints in third party system based out of our data from SAP. When these are getting created in third party, we need to interface back into SAP and create Dispute (against compalint created in third party). I am thinking of using program FDM_AUTO_CREATE to create disputes based on company code/document number/fiscal year/line item etc.
To differentiate between disputes and complaints i am proposing to create new case type (other than dispute case type) and have its own number range assigned to it, so that it can be easily recognised in SAP. But as per standard SAP setting one company code can have only one default case type assigned to it and whenever i create cases using FDM_AUTO_CREATE, system always picks up only one case type.
Is there any standard setting so that system can create complaint cases in SAP with different case type (other than default dispute case type) while using auto create program?
Thanks in advance
Aleem

This is an common question when implementing SAP TCM for trade promotions where claims/ disputes go to CRM for approval.
We have overcome this by leaving the standard dispute case type in the default settings. We then activate a BAdI - FDM_AR_DEF_CASE_TYPE. We create a Z table that we linked to in the BAdI - that had company code and reason code - and put the additional case type in the table linked to a reason code. By adding a reason code (FI-AR) to the specific items, when you create the dispute it will call the BAdI and table and use the extra dispute case type as opposed to the standard one.

Standard message type limitation on company code

Hi all,
currently I'm implementing ale distribution with the standard message type
FIDCC1, i'm filling idocs in my source code and run function master_idoc_distribute
now i need to set up a distribution model, but when i do so, the transactions to make
documents complains that for certain company codes there is no global company code
although those codes aren't used for the distribution. Is there a way/place where i
can limit the use to certain company codes, without having to make global cc for
all the companies in the system?
or do i need something else then a distribution model to send the idocs?
grtz,
Koen

you will get good answer if you post it in ABAP forum.

Defaulting document types for a particular company codes.

Dear All,
Is there a way to default certain document types to particular company codes, so that when ever if we enter that particular company code then automatically the default document types has to come. I tried to check for configurations but could not. Please let me know how to achieve this scenario.
Regards
Srikanth

Hi,
No, does not seem possible to me without development...
Regards,
Eli

DMS Document relationship with company code

Hi All,
I have to delete all DMS Documents for Document Type AAA and company code 8200. I am not able to find relationship between Document info records and company code in table level so can you please guide me How to get the relationship.
I checked with tables : DRAW, DRAD, AUSP... but not got proper answer.
-Thanks,
Ajay

Hi All,
Thanks for your replay. This issue is resolved.
In transaction CV04N with classification tab I have to option of Company code. I am able to get list of DIR's with company code and document type.
-Thanks,
Ajay

Document type during Goods Receipt in Intercompany Transfer flow

Hi,
We create a PO, Delivery and GI in company A
We do a Goods Receipt in company B.
Can we customize that FI document type ZZ is used during Goods Receipt in company B?
Document type ZZ may only be used in the Intercompany flow.
Where can I customize this setting?
Thank you in advance,
Best regards,
Eric van Zundert.

Hi,
The following are the standard steps to create an accounting document type and assign it to a transaction.
1) In T-code OBF4, click on "Financial accounting document types" and create a new document type.
2)On the same T-code, Click on "Goods receipt document type" and assign the document type to the transaction.
3)On the same T-code, Click on "Financial accounting No range" and assign the number range for each document type based on company code and fiscal year.
Thanks and Regards,
Maheshwari

The document type of accounting document of an invoice is different

Dear Friends,
The document type of accounting document of an invoice is different for another invoice of the same type.
The company codes differ.
For example the credit memo B1 has RV as the document type for a particular company code and sales org,
while the it is Q1 for another company code & sales org.
Is there any customising settings in FI. Please help.
Kind Regards
Ravi

Hello,
SD invoice document types and FI document types doesn't depend to company code. You can not set different FI document type for each company code with using standart customizing. But you can use FI substitution or SD-FI integration exit, or business transaction event exits for this case. If you want detail, I'll give you some examples how can you change FI doc types while posting to FI.
Regards,
Burak

Document Type restirction by company code

Similar Messages

Maybe you are looking for