Doubt in Integration Scenario

Hi All,
I wuld like to know whether I can create a Integration Scenario after completing the Configuration steps (eventhough it doesnt make much sense)

Hi Aarthi,
Its not mandatory to create the integration scenario.
The integration Scenario in IR will be useful for re-presenting the whole flow of the interface.
If you do the itegration scenrio in Design time then you do not need to follow the stpes which is required in configuration like creating Aggrement,determination and all. you just need to import the scenario from integration repository that will avoid configure part.
Usually during the audit time the auditor checks whether IS is designed or not? as that is the good practive to design ur scenario with IS.
Companion Guide to Integration scenario
/people/venkat.donela/blog/2006/02/17/companion-guide-to-integration-scenario
It will be good loaction to get all the information about whole interface.
You could either create or transport the same Integration scenario in ID.
With the use of Integration scenario you could model the whole interface with all minute details
It comes under best practices. So if you create the IS it will be very easy for you to understand the and designe the business flow. Morevere becomes very easy while creating/configuring the Integration Directory, you just need to import the design objects form IR.
If you will not create IS, there is no harm. So it all depends upon client and also you.
Thanks,
Vijaya.

Similar Messages

Doubt in Integration Scenario Configurator- Not able to assing sender chane

Hi All,
i have imported the integration scenario to the Directory.
Assigned the relevant business services to both Sender and Receiver.
I am able to assign a Receiver Communication Channel.
But for sender system communication system , it shows 'Not Required'. i am not able to do anything. Sender is a Third Party System. I have created a sender JMS channel under it.
could someone suggest what is to be done?

If you configured your sender BS and CC correctly it must show..
one try go and create a dummy sender agrement for the same interface check it is allowing there ,,if yes then u doing something wrong in configuaration scenarion.

Doubt in Integration Scenario Creation

Hi All,
My scenario is file to Idoc.Need to create a Integration Scenario. I have stored all the Interface and Mapping objects in teh same Software Component Version (say SWCA). So in Integration Scenario, What will be the Sender and Receiver Software Components. Will SWCA act as both Sender and Receiver or I need ot select SAPR3 for Receiver System.
And will teh actions be external or internal?

Hi,
the SCV is just a compnenet where you will design all the objects, under Integration scenario you will assign the sender and receiver communciation points in integration directory.
Actions are indicating as the triggering points for sender and receiver interface. If you will be using outside the SCV then it will external and for internal purpose have to select as internal
Please refer step by step process for IODC to file as well as file to IDOC
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/error%2bhandling%2bin%2bfile-idoc%2bscenario
Thanks
Swarup
Edited by: Swarup Sawant on Jun 11, 2008 4:08 PM

Integration Scenario's utility in IR/ID ?? & Communication Channel

Hi All,
Please clear the following doubt about integration scenario and communication channel.
1. Is it necessary to create integration scenario in the IR(design) and then to import it in the ID(configuration) ?
Is it possible to create the integration scenario in the ID without even mentioning the same in the IR ?
2. During the design phase in the ID we get the option to create the communication channel tempelate, What is the purpose of it ? What if we create the communication channel in ID wihout using the IR option... ?
Thanks and Regards,
Mona

Hi,
Michal had already answered you questions to the point. I just thought of adding few words..
Integration Scenario basically helps you to define the integration flow and you can use the same during the configuration> Because of this Ur ID work will be simple. As Michal said this is not mandatory and you can goahead without a Integration Scenario.
For Eg:
You think of a development enviorinment that there different consultant for Design and Config. I mean the person who is designing will not be doing the config... In this kind of situation how come the config consultant knows which interface to use where... say for instance if you use BPM it really hard to understand it. So either he needs to have a clear documentation with the clear name before he could do the configuration. The integration scenarios helps a lot in this case... The config guy just have to give few parameters and click next, next and done.
Thanks,
Prakash

Action in Integration Scenario

Hi
I have a doubt regarding " Actions" in Integration Scenario in IR. I have an interface which is actually a clubbed one, there are two interfaces together and there are two sender interfaces and two receiver interfaces.
So how many should I create in Actions ? Should there be four actions ?
Ajith

Hi Ajith,
Yes, you were correct go ahead.
Refer the below link:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/68/88a440df800160e10000000a1550b0/content.htm

Regarding Integration Scenario and Communication Channel Template

Dear All,
1.What is the purpose of creating Integration Scenario in IR?Is it compulsary to create Integration Scenario in Every Case?(I mean Scenario not using BPM and Scenario using BPM).
2.What is the purpose of creating Communication Channel Template in IR?
3.If we create Communication Channel Template in IR?Do we need to utilize that Communication Channel Template for creating Communication Channel in ID?
4.IF we have created Integration Scenario in IR,and we transfered that Scenario from IR to ID,then Do we need to create Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination?or will they automatically created?
Please clarify my doubts.Thanks in Advance.
Regards,
Ramana.

Hi Ramana,
1.What is the purpose of creating Integration Scenario in IR?Is it compulsary to create Integration Scenario in Every Case?(I mean Scenario not using BPM and Scenario using BPM).
>>> For graphical overview about the sceanrio.It is not compulsary to create Integration Sceanrio.
2.What is the purpose of creating Communication Channel Template in IR?
>>> In integration scenario while creating the connection between two actions u need to specify the communication channel templates for Sender and Receiver.
3.If we create Communication Channel Template in IR?Do we need to utilize that Communication Channel Template for creating Communication Channel in ID?
>>>You can utilize these templates in ID.After completion to creating the configuration sceanrio need to modify the parameters of the channels.
4.IF we have created Integration Scenario in IR,and we transfered that Scenario from IR to ID,then Do we need to create Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination?or will they automatically created?
>>> From Tools-->Transfer Integration sceanrio from Integration Repository, From input help choose the sceanrio,Continue and click on Finish ,with the same name the configuration scenaro will create in ID.You need to follow the Confiuration steps like Assign services , here need to choose u r source & target business systems and Configure Connections in this step you can cross check the interfaces,mapping,channel templates involved in this sceanrio and Generate. It would automatically generates Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination. It would shown to u Generation Log, here you can check what are the objects generated and if there are any errors it would shown Number of errors.
By setting the appropriate channel parameters, activate all objects from change list.Now u can able to test the sceanrio.
However in latest version it is not compulsoary to create Integration sceanrio in IR and to the above things.You can use Configuration Wizard to do all these things or you can do these mauvally.
Hope it will helps to clear u r doubts.
Cheers
Veera
>>>Reward points,if it is needful.

Create Integration Scenario - Step by Step

Hi All,
Can anyone guide me the step by step procedure for creating integration scenario in IR. Thanks
Deno

Hi Deno,
I think you have got enough idea hw to create a Integration scenaion in the IR itself..any way let me explain my self point ways so you might get atleats one point would give you more advantage.
First you have to finish the Data types,Message Types,Message Interface and Message Mapping and Interface Mapping after you done with all the above things you will be starting of the below steps for start creating the IntegarationScenario.
1) Click on Integration Scenarios & Integaraton Process in your name space and you will be able to see the three objects..among three select the actions and right click and select new.So enter your action name,here one imoportant point is you need to select two actions one is for sender actiona and another one is receiver action.
2)Give name to the sender action
For sender:select the outbound interface and select the object type as Message Interface if it is the idoc select the idoc correspondingly,and select the Message Interface for the corresponding sender action (outbound) and same do the for the receiver action also whre you need to select the Inbound interface.
3) After you done with your actions go to the Integration Scenationand and give name to your Integation Scenation,you will be able to see the one white screen and place the cursor over the white screen and right click and select the Insert Aoppplication Component and select your sender action,select the product and give name for the role and save it...the process is for sender action and also do the same for the receiver action.
4) After you done with both sender actiona and receiver actions save it and activate.
5)once you activated your integration scenatio go to ID and select the Tools drop down list and select teh Transfer Integration Scenatio from IR and select the your Integration Scenatio which you have created and click and finish after you done this you will be abel to see your integation scenario in you ID.
Please feel free to ask any doubts when you are doing the same above..
I will be waiting for your queries..
Thanks in Advance.
Chandu

Unable to Load the Integration scenario into the Integration directory

Hi All,
I am new to using SAP XI.
Require your help on the following issue.
I have built an Integration scenario, added Component Type: Product Version, inserted actions and connections.
I did check for any errors. I found no errors.
When I am trying to load this scenario into the Integration directory its not showing up the scenario in the popup.
Navigation:
Directory > tools> Transfer scenario from repository
The status of Integration Scenario in the builder shows as
"Being processed".
I created the scenario 2 days back.
Can some one help me in this?
Regards,
Meher

Hi All,
Thanks to all who helped me.
michal,divija : Can you please let me know in details how to activate Business Scenario?
I did not create any business process.
Sridhar: I did releases some locks on my process, no luck.
Can you please explain me in more details?
Should I have a process build for my Integration scenario to be activated?
Thanks,
Meher

The userexit is not working in integration scenario- inb. delivery creation

Hi Experts please help,
We know that vl31n is for inbound delivery creation.
in one of the userexits of vl31n, I did code ( shifting the batch to vendor batch )...
So,the user enters batch number under batch field and
fill all other required information and saves to create inbound delivery.
Whilw inbound delivery creation my coding in user exit gets executed and shifts the batch number to Vendor batch field.
This we observed when we check in vl32n or vl33n, the batch entered shifted to Vendor batch field() batch field is space.
This is working fine with vl31n inb. delivery creation.
But in integration testing it failed.
In Integration, what is happening the other system called "ICH" is creating ASN (shipping note) with the batch number, which inturn created the inbound delivery in R/3 via XI as shown like below.
Integration scenario :
ICH System (ASN) --> XI --> R/3 System (Inb. delivery creation)
So when "ICH" triggers ASN to R/3 the inbound delivery creation is happening but the batch number is not shifting to vendor batch field.
when we open the inbound delivery in vl32n, the batch number is under batch field only...it should be under vendor batch field.
My understanding is my user exit coding of vl31n not getting executed in the integration process.
Kindly help me what can I do to shift the batch sending from ICH to shift to vendor batch field.
Please let me know if I could not explain the scenario.
THANKS IN advance.
YOUR HELP WILL BE GREATLY APPRECIATED.

the ASN from ICH, it uses a standard idoc function module IDOC_INPUT_DESADV1 and there is one user exit EXIT_SAPLV55K_012 which calls ZXTRKU07
need to code there.
solved by meetings with some other experts.
THANKS.

Adding a new reciever to an existing integration scenario of conf in PI7.0

Hi SapAll.
here i have got a requirement to add one more reciever to an existing integration scenario in Integration Directory(Configuration).
this Integration scenario is for sending the idoc MATMAS.MATMAS05 From 5 Different SAP-R/3 Systems to 2 Recievers.
here iam using 5 different business systems with idoc communication channels for sending idocs and 2 business systems for recieving idocs in file format with file adapters.
so when iam trying to create new reciever detarmination or Interface Determination, it says object already exists.
but i can created reciever agreement without any error.
so can anybody guide me on how to create the Interface,Reciever Determinations without any error.
regards.
Varma

now i just created a new business system with file communication channel
Why have a Business System for a FILE channel? We normaly use Business Component/ Service.
You mentioned IDOC SENDER channels....why? For IDOC we just create Receiver channels...unless you want to specify IDOC packaging.
when iam trying to create a reciever detarmination from one of the existing sender system say like BUS_SENDER2 to new
reciver system ex:NEW_BUS_RECIEVER it says object already exists.
Receiver Determination can have the same BUS_SENDER2 system/ service as sender....but it should not have the same Interface Name....this is where PI is throwing the error.
There already exists a Receiver Detremination with BUS_SENDER2 as source system and the same message interface.
You can reuse the same RD by just entering one more receiver system/ service below the already existing one (in the RD)
In short just search your ID and you will see a RD created with the source details which you are trying to use.
If you want to see a difference, then create a new sender service/ system and then use this to create the RD!
Regards,
Abhishek.

XI Integration scenario for material replication from SRM to SRM-MDM

Hi Guys,
We are working with the following landscape:
SRM Server 5.5
ECC 6.0
SRM-MDM 5.5 SP6
PI 2005_1_700 SP0006
I have a question for you about replication of the material master form SRM EBP to SRM-MDM.
In XI we are trying to configure this scenario. For this we have imported the following XI Content:
- SAP SRM Server 5.5
- SAP SRM-MDM 2.0
We have the following problem; that when tring to configure the this scenario we are getting GUID errors. Probable because some XI content is missing. In the SRM-MDM 2.0 XI content we also see that SRM 6.0 scenario's are avilable in the currenlty imported XI content, but when clicking on 'Edit action' in these scenario's we are getting the following error:
"Software component version with GUID XXXXXXXXXX... does not exists"
Can any one tell me why SRM 6.0 scenario's are availble in the XI content for SRM-MDM 2.0, and which additional XI content we need to import to get rid of these GUID error's?
Becasue of this the configuration in the Integration Directory fails.Transfering the integration scenario to the Integration directory gives a couple of errors: "Unable to load action. Check whether all necessary actions have been released in the integration repository".
Hopefully some of you know what to do, because I am currenlty stuck....... Do we need to import additional XI content, or maybe the Xi content for SRM 6.0. If so where can I get the XI content for SRM 6.0. It is not available on the SAP Support portal as a download.
Thx In advance.
Regards,
Wouter

Hi,
>"Software component version with GUID XXXXXXXXXX... does not exists"
try updating SLD (CIM DATA) with the latest patch available
Regards,
Michal KRawczyk

SOAP receiver starting the integration scenario

Hello experts,
I am searching for a way to start an integration scenario with a SOAP receiver in the same way it is possible with JDBC sender (with a pool interval).
The scenario is: I need to execute a webservice, getting information from it, and send this information to an abap proxy on ECC side.
I thought about creating a ccBPM with a loop (with no end) and a wait step for doing it... although it works, I think it is not the best way for doing it.
Thanks for your suggestions!
regards.
Roberti

Thank you guys.
Let me explain the scenario in a better way.
The scenario is:
1 - Automatically execute a partner webservice sync call with constant parameters.
2 - Get the webservice response.
3 - Map the response to get required information.
4 - Send this information to an Abap proxy.
5 - Process the information to proper abap objects.
Note: This scenario needs to be automatically executed every 30 minutes.
The purpose of this scenario is to GET documents (xml) from a partner web service and import the information to ECC, continuously, each 30 minutes. So, no one is supposed to start the process, it should be automatically triggered. The goal is exactly the same we have with JDBC or file sender adapter, where we can set a 30 minutes interval to automatically execute an sql statement in the database or read a file in a path.
JAVAGUY and Stefan Grube, I did it in this way. But, scheduling an Abap job to start the proxy -> webservice -> proxy scenario, the Abap job is the RESPONSIBLE for the scenario. If something wrong occurs with that job schedule, the integration will stop working. I would prefer PI as responsible for the process, so I can have alerts and other execution guarantees.
Abhishek Salvi and Pratik_du, I think that the scenario is clear now, don't it? About the ccBPM, this is another way I implemented the solution. I created a ccBPM with
1 - A receiver that I execute just once
2 - One loop with a condition 1 = 1 (infinite)
2a (Into the loop) - A send step to execute the webservice sync call
2b (Into the loop) - A receiver step to get the webservice response
2c (Into the loop) - A map step to transform the information I need
2d (Into the loop) - A send step to send the information to the Abap proxy
2e (Into the loop) - A wait step to wait 30 minutes until execute the next step of the loop
IIn this case, I will have a ccBPM running continuously and doing the job.
I posted the question because I'm not sure which solution is better, and check if you can see another way to make PI the responsible for starting a scenario with a soap receiver like this.
Thank you again.
Roberti

XI testing POS Integration Scenario

Hi Folks ,
I am new to XI environment and have a query:
I am configured a process integration scenario for sending TLOG to POSDM. Can you pl advice how can I go about testing my config. At present I do not have any POS-GM system running so I was wondering that I will have to put my *.txn file in the "Source Directory" specified folder...
How can I do a test ..pl advice.
thanks!!

Hi sunny,
No problem .........
Please go thru this simple file to IDoc scenario.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/fileToIDOC&
and if you want to explore more about XI .. sure you want to ...then check out the following step by step scenario guide
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/step-by-step+guides
It will be helpful ......
regards
Ashwin

ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
Steven

Hi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi.

Error in Protocol for Generation of Integration Scenario Configuration

Hi,
If I try to generate my Integration Scenario in simulation or real mode I get the follwoing error allways in the "Generation Statistics" section (last entry):

Error when creating or changing configuration objects 0
If I save it and check it - no errors could be found. Any ideas?
Regards,
Christian

Hi Christian,
you working with SAP software
> Error when creating or changing configuration objects 0
means:
zero errors...
Regards,
Udo

Doubt in Integration Scenario

Similar Messages

Maybe you are looking for