Dump by 0Orgunit_ATTR in TCode RSA3 in ECC/ F4 selection for ORGEH missing

Hi Gurus,
i am facing a problem by executing 0Orgunit_attr in the quality system. In D System vevry thing is ok.
By executing the 0Orgunit_ATTR extractor in RSA3 in ECC, i had a dump.
The Error is as follow:
Runtime Errors ITAB_DUPLICATE_KEY
Date and Time 14/01/2011 11:10:12
Short dump has not been completely stored
Short text
A row with the same key already exists.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLRSAODS" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An entry was to be entered into the table
"\FUNCTION=RSAR_ODS_GET\DATA=L_TH_ISOSMAP" (which should have
had a unique table key (UNIQUE KEY)).
However, there already existed a line with an identical key.
The insert-operation could have occurred as a result of an INSERT- or
MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
initial lines into a table with a unique key.
After some researches by SDN i proceed as follow:
1.I used program: RSAR_RSISOSMAP_REPAIR in SE38 to identify the objects. But no object were found.
2.I checked table RSISOSMAP in SE16. It was empty.
I noticed that in the extractor checker the selection button for ORGEH is missing. That means i can not use F4 to select and organizational Unit.
Could you please help?
Man Thanks in advance
Gilo

resolved with help of basis team

Similar Messages

  • Short Dump in Prod system in RSA3 for Datasource 2LIS_18_I0NOTIF...Help Pls

    Dear Guru's
    In our porod System in Tcode RSA3 when i give Dsource 2LIS_18_I0NOTIF and click on Extract i get Follwing Dump
    I searched for the note but i did not found any thing proper
    Here r Dump Details:-------
    Runtime Error          CONNE_IMPORT_WRONG_COMP_TYPE
    Exception              CX_SY_IMPORT_MISMATCH_ERROR
           Occurred on     13.08.2008 at   14:21:57
    Error when attempting to IMPORT object "MC18I00NTF_TAB".
    What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLMCEX" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    When attempting to import data, it was discovered that the data
    type of the stored data was not the same as that specified in the
    program.
    Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_E
    was neither
    caught nor passed along using a RAISING clause, in the procedure
    "MCEX_BW_LO_API" "(FUNCTION)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    When importing the object "MC18I00NTF_TAB", the component no. 2 in the
    dataset has a different type from the corresponding component
    of the target object in the program "SAPLMCEX".
    The data type is "D" in the dataset, but "F" in the program.
    How to correct the error
    The exception must either be prevented, caught within the procedure
    "MCEX_BW_LO_API"
    "(FUNCTION)", or declared in the procedure's RAISING clause.
    To prevent the exception, note the following:
    Try to find out why the type of the object is different.
    There are several possible reasons:
    |
    --- In the ABAP Dictionary, the type of the imported
    |   field has changed. Make sure that the type of the imported
    |   field matches the length of the Dictionary field.
    ||   If the data could not be restored from another source, this data
    |   must be read with the "old" structure, then converted and exported
    back with the new structure, so that future IMPORTs always work
    with the new structure.
    A new program version is active, and it no longer matches the
    dataset. Try to solve the error by generating the program "SAPLMCEX" again
    as follows:
    In the SAP System, choose the transaction SE38. Enter the program
    name "SAPLMCEX". Then choose the "Activate" function.
    Can any one please kindly help....
    Thanks

    Hi,
    so did you change anything at your datasource? Before transporting to prod, you need to delete the setup tables  and then you need to run a delta to pick the latest delta records, then transport, replicate and activate the comm-structure. That will not effect your delta in prod. But again, for me the dump looks like a mismatch between the extract structure and the setup tables. You might have changed something after the setup tables have been filled. And additionally usually rsa3 is doing a full and so pulling the data out of the setup tables.
    regards
    Siggi

  • ABAP dump while running the tcode MIGO

    Hi All,
    I am getting the abap dump while running the tcode MIGO when I searched I got two relevant sap notes but our functional team said that its not applicable in our case.
    Please find the details of ST22 analysis-:
    Runtime Errors         MESSAGE_TYPE_X
    Date and Time          17.04.2009 13:18:45
    Short text
         The current application triggered a termination with a short dump.
    What happened?
         The current application program detected a situation which really
         should not occur. Therefore, a termination with a short dump was
         triggered on purpose by the key word MESSAGE (type X).
    Error analysis
        Short text of error message:
        No RFC destination is defined for SAP Global Trade Services
        Long text of error message:
        Technical information about the message:
        Message class....... "/SAPSLL/PLUGINR3"
        Number.............. 002
        Variable 1.......... " "
        Variable 2.......... " "
        Variable 3.......... " "
        Variable 4.......... " "
    How to correct the error
        Probably the only way to eliminate the error is to correct the program.
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "MESSAGE_TYPE_X" " "
        "SAPLMBWL" or "LMBWLU21"
        "MB_POST_GOODS_MOVEMENT"
    SAP Notes i have reffered 1098491, 1041122
    Currently we are running on SAP_APPL     600     0007     SAPKH60007     
    Regards,
    Prashant

    Hi Rohit,
    This particular note is valid for
    Support
    Packages Release Package
    Name
    PI 2004_1_46B SAPKIPZI38
    PI 2004_1_46C SAPKIPZI48
    PI 2004_1_470 SAPKIPZI58
    PI 2004_1_500 SAPKIPZI68
    Our system is running on PI_BASIS     2006_1_700     0005     SAPKIPYM05
    Pls suggest.
    Regards,
    Prashant

  • New tcodes in ECC 6.0 for obsolete tcodes in 4.6C

    We are doing security upgrade from 4.6C to ECC 6.0.
    There are some tcodes have been deleted in ECC 6.0, but I don't which new tcodes will replace them.
    I am looking for the new tcodes in ECC 6.0 for list of tcodes in 4.6C (below) which have been deleted in ECC 6.0:
    AL02, AL08, AL10, AL18, AL21, AL22, CN90, CN92, CN94, KSRP, SAPSAP_IA,
    SB02, SO80, ST08, S_P9C_18000155, S_P9C_18000155
    Note:  i verify the table PRGN_CORR2 in ECC 6.0, and the list provides from OSS note 991377, however both of them not include those tcodes I mention above.
    Your input with the new tcodes, that replace the tcodes above, will be appreciated.
    Thank you
    Steve

    Hi,
    This thread may help you with the required information.
    Re: TCode set for ECC6.0 compared to 4.7
    Rgds,
    Raghu Boddu

  • Sql error dump while using pfcg tcode.

    hi,
    I am getting one dump while executing PFCG tcode. Hereunder i am pasting the log,
    Runtime Errors DBIF_RSQL_SQL_ERROR
    Exception CX_SY_OPEN_SQL_DB
    Database error text........: "ORA-01115: IO error reading block from fil
    (block # 52025)#ORA-01110: data file 9:
    '/oracle/OPL/sapdata2/sr3_6/sr3.data6'#ORA-27091: unable to queue
    I/O#ORA-27072: File I/O error#HPUX-ia64 Error: 5: I/O error#Additional
    information: 3#Additional inform"
    Internal call code.........: "[RSQL/FTCH/AGR_FLAGS ]"
    Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    "SAPLPRGN_START3" or "LPRGN_START3U33"
    "PRGN_START3_LOAD_FLAGS"
    Soon help will be appreciated.
    regards

    Hello,
    Take a look at note 546006 - point 6
    Thanks

  • Thiis error when I execute RSA3 on ECC. Any hints?

    Hi Experts,
    can you help me figure out how to fix this problem:
    I am on an IDES system used by many for training. I am execute rsa3 and enter any of these datasources:
    0fi_gl_4   or 2lis_11_vascl
    and I get the following ABAP screen; any way to get the data extraction going?
    Thiis error when I execute RSA3 on ECC. u2018----
    screen -
    (2) ABAP DEBUGGER CONTROLS SESSION 2(EXCLUSSIVE)
    method IF_EX_RSU5_SAPI_BADI~DATA_TRANSFORM.
    field-symbols: <wa_ZOXID30163> type ZOXID30163.
      break-point.
      case i_datasource.
        when 'ZMARA_DS'.
          loop at c_T_DATA assigning <wa_ZOXID30163>.
            <wa_ZOXID30163>-zztest = '123'.
          endloop.
      endcase.
    endmethod.
    u2018----
    Thanks

    Hi,
    Looking at the code it seems like there is no error but someone has put explicit Break point in the code, now you have two options,
    1) Once you get the above screen just press F8 and let the extractor proceed. But everytime this will be manual process.
    2) Remove the Break-point statement from the code.
    As you said it is asking for Access Key, then get your developer key generated on service.sap.com or contact to your basis team.
    Regards,
    Durgesh.

  • When we are able to see the data in Tcode RSA3(Source system)

    Hi,
    Please help me!
    In enhancement after doing the R/3 stuff, when we are able to see the data in Tcode RSA3 in R/3 only?
    Give the detail for all types of data source and for all types of loads.
    eg: Std data source for deltaload, Generic data source for full load.....etc...
    Regards,
    Shiva.

    Sure...
    I am doing enhancement for datasource '2LIS_05_QVUDN'.
    I complited the R/3 stuff and check the data for enhanced fields in RSA3...it's giving run timeout run time error.
    Then I just ignore that error and I complited BW stuff successfully....after compliting BW stuff I am able to see the data in RSA3 in R/3.
    So my question is, What is the root cause for this....?
    When we are able to see the data in RSA3 in source system.?
    please give me details for all types of datasource and all types of loads so that it will helps a lot for me in future.

  • New functionality in ECC 6.0 for auto clearing of bank clearing account.

    Is there any new functionality in ECC 6.0 for auto clearing of bank clearing account.
    Regards,
    Kishore

    Hi,
    There no new functionality in ECC 6.0 for auto clearing of bank clearing account. Still you need to depend on Manual / Electronic bank statement to clear them.
    Thanks
    Prasada

  • 4.6c  to  ECC 6.0  for  ABAP

    Hi,
       I was asked to create reports in ECC 6.0 from the reports which already exists in 4.6c.Also told that there is a CTS in ECC 6.0 for the HR objects. What is CTS?What should I do with this?How should I do?
    *****************************T/Code UCC********************************************
             Do I need to copy the same programs into ECC 6.0 and check in the  T/Code UCC.
    Can anyone tell me how to enter there.It is asking for Object type(what  do we enter there),package is to find what is the package for HR objects,Original System (what is that),Max. no of Programs default is 50 so what does it mean etc......................
    After this how to proceed with the problem?Can anyone has the document for trouble shooting the reports in ECC 6.0
    As an ABAP HR person do I need to change the LDB from pnp to pnpce in attributes along with unicode check in.
    Anyone please help me out.
    Thanks,
    Brahmi

    Hi,
    To your first question answer is no, to your second question I suggest to take a look at the Master Upgrade Guide.
    Good Luck

  • ECC Best Practice for BOBJ

    Hi Guys,
    Can anyone please provide me the documents for ECC best practice for BOBJ. particularly the best practice to define the Infosets in ECC?
    Thanks much for your help
    VJ

    Hi,
    Go through sap note SAP Note 1411844 for the best practice.
    Re: Creating xcelsius directly on ECC
    @Sri

  • Is any different between ECC 5.0 and ECC 6.0 for Excel export?

    Dear all,
    As you know, most standard SAP report allow Excel export. I just wonder is any different between ECC 5.0 and ECC 6.0 for excel report in standard SAP reports?
    In ECC 5.0, Reports in profit center accounting, LIS, or PA, etc. has their own different way to export to excel and is any improvement in ECC 6.0? I Thanks.

    In ECC 5.0, a lot of reports don't have Excel export function instead user has to go to system -> List -> Save -> Local file -> spreadsheet.
    I just wonder is any improvement in ECC 6.0? just like LIS report, user can select export -> Transfer XXL to either pivot table or just plain excel but the function only exist in certain reports in some modules and not all.
    Thanks again.

  • Set a productive ECC as source for two BI's?

    Hi,
    I don't know if this is an obvious question (sorry if it is)... but I've looking for related info and found nothing.
    I have my productive ECC system working as source system for the productive BI. Now I'd need to connect this ECC as source for my development BI system also. When setting the connection I get errors RSAR 371, RSAR 373, RSAR 374, RSAR 8 and E0 414. I found some threads about these errors but related to system changes. I don't want to change source systems but add a new one.
    Is it possible to have an ECC as source for several BI systems?
    Regards,
    J.

    Hi
    Yes you can set up 2 BI system after ECC6 system.
    Check that the set up of the logical source system in ECC is done correctly with specific idoc segments, specific ports of communication, etc.
    You may haveto ask a basis expert for that
    The only issue you might face is linked to the delta sources not target system dependant.In thatcases you might loose the delta data into one of your BI system
    PY

  • Can somebody order ECC 5 IDES for me?

    Hi Guys,
    I am SAP certified ABAP developer and have S userid. But I am not authorized to download SAP IDES software. I bought the software from ebay but could not get the Access key and Developer key, so I cannot practice ABAP without both the keys. I need to practice ABAP with HR module.
    I will appreciate if somebody can order SAP IDES ECC 5.0 for me.  Please email me XXXXXXXXXX for my address.
    Thank a lot.
    Message was edited by:
            Klaus Keller

    Hi,
    This is not the correct place for such businesses. Just to have a S user is not sufficient to download SAP IDES. You have to buy this software and I would propose you to buy it the official way instead of using ebay.
    I'm closing this thread.
    Regards,
    Klaus

  • Billing Request dump required from 1 april 09 to 31st Dec 09 for Comp code

    Hello friends
    my user want Billing request  afrom pril 09 to 31st Dec 09 for Comp code
    can anybody tell me what is Tcode on same
    Regards
    vamsi

    Hello thanks for your reply
    user want sale order wise Billing Request
    Can you please give me one more suggetions
    Regards
    vamsi

  • Dump while setting a break point in ECC 6.0

    Dear Experts,
    In ECC 6.0, when I try to put a break point in the program to stop the control there. I am not able to do so, it is going to dump. The dump message is also not very clear. Do anyone of you are facing the same problem. Any idea why is this happening and how do I fix it.
    Can it be due to the improper installation? Please respond.

    First of all thanks to Mickey, Nitin, Anki, Sujit, Red, Madhu, Vibin for the quick response...To be honest I did not expect such a response as a new member to the SDN community...I am sorry I could not mention the detail about the dump initially...Here is the detailed description..
    Issue: In ECC 6.0, when I write a simple ABAP program (e.g. 'Hello World' program). When I try to keep the cursor on any abap statement and click on the 'session break point' icon in the tool bar to set the break point, i get a status message 'Compling SAPLBREA in separate task and finally i get the dump.
    Dump Detail :
    Runtime Errors: DBIF_REPO_SQL_ERROR
    Short Text : SQL error 1115 occurred when accessing program 'LNAVIDAT' part "SRC".
    Program: SAPLBREA
    Include: LBREATOP
    Row: 41
    There is a an include being called at line no 41, which is "Include LNAVIDAT".
    Now when I click on the 'debugger' icon in the dump...It points to a functional module "RS_SET_BREAKPOINT"
    Also, while double clicking on this include to see the code within, it issues an error message saying "SQL error occurred when accessing the table TRDIR".
                                    Or
    While trying to display the code of the include LNAVIDAT in se38 to see what is wrong with that i get another dump and this time it points to be SELECT query in the dump which is:
    SELECT SINGLE * from PROGDIR WHERE name = rs38m-programm
                                                              and  state = active.
    Thereafter, i keep getting dumps when i try to go to any T.codes (e.g. se11, se38 etc.). until i log off and log in again. Hope this helps you guys understanding the problem. Being new to SAP, I have no clue why is this happening and how to fix it. Thanks in Advance.

Maybe you are looking for