ECatalog for SRM - Planned Maintenance

Hi all,
Currently, I have a requirement to develop an eCatalog for Planned Maintenance (PM) Order. For each PM order, there will be list of components need to be purchased from Vendor. When user click on 'Catalog' button (toolbar below of Component tab), it will prompt up a dialog box for user to key-in Catalog ID based on Plant and Maintenance Type, and direct the user to a vendor's catalog page (Internet browser like), where user can select the desired components for maintenance usage.
Also, I notice that SAP version 4.7 only cater one Catalog as a standard, is there anyway to cater multiple catalogs instead (any BADI or user exits to achieve this)?
The major challege for this development will be:
- Multiple Catalogs
- UoM Mapping (from Vendor's UoM to SAP UoM)
- Product Category (from Vendor's Product Category to SAP Material Group)
- Log file of each transaction (for trouble-shooting purpose, so that user can identify which part of the error occurs)
I understand the above can be configured and development of BADI will be involved, however, I'm totally new to this eCatalog development. Hence, I would appreciate if someone can shed some light based on the requirement.
Many thanks.
Best regards,
Patrick

I'm able to create multiple catalog for Planned Maintenance (TCODE IW32) in R/3 (4.6c), and it has working fine.
Regards,
Patrick

Similar Messages

  • Get latest order for a scheduled maintenance plan

    Hi experts,
    I have a requirement where i have to get the order id for a scheduled Maintenance plan.My scenario is explained as below:
    A maintenace plan is scheduled and as a result of it an order will be created automatically  by system. Now i have to write a Report program which will be running daily and this report has to pick only those order which are NOT complete and these order will come from the above scheduled maintenance plan.
    Therefore i have to pick incomplete order based on scheduled maintenance plan.Any idea how to achieve this requirement?
    In case of any doubt please let me know.
    Regards,
    Abhishek

    Thanks for reply. But my requirement is a bit differen.
    I need a BAPI which can take Maintenance Plan as input and it can return the latest created incomplete order which is created due to scheduling of Maintenance Plan.
    Regards,
    Abhishek

  • Settings for performance based maintenance plan

    Hi experts,
    Incase of hour or Km dependent performance base plan, how we can fix the reading (In hours or Km) limit or period of order generation? what is the impact of annual estimate? Please give me an example with all readings.
    Regards,

    When you create a plan with a counter (Associate a measurement point of counter type to the same), then you would be able to specify at what intervals (Counter readings for this measurement point), the call object associated to the Maintenance plan should be generated.
    The actual call date for this maintenance plan however depends on the "Annual estimate " for the measurement point counter and also the actual counter readings captured for the measurement point
    For ex: Annual estimate maintained for the Point : 12,000 Miles .Maintenance for this equipment should be triggered for every 1000 Miles (This should be the counter interval maintained for the Maintenance plan). Based on the above the maintenance plan would generated a call every one month (Annual estimate / period).As an example,  when this Maintenance plan is scheduled for 1 yr, then 12 maintenance calls will be generated one each for every month. The actual and scheduled dates for the call depends on the various other scheduling parameters maintained for the Plan.
    Its critical for any counter based maintenance plan that the counter reading is Captured , Through measurement documents regularly, EVEN IF THERE IS NO CHANGE TO THE COUNTER READING, Otherwise, the system generates call objects (for example, maintenance orders) based on the estimated annual performance entered for the counter, even though the counter reading has not in reality been reached.
    for ex: owing to a vehicle breakdown/ repair if the vehicle has been in repair shop for a month,To avoid a maintenance order being created before it is needed, you maintain the new total counter reading in the system regularly over the period of the month. You then reschedule the maintenance plan using IP30, and the call date is recalculated based on the updated counter reading. In this case, the call date would be later.
    [Detailed SAP Help|http://help.sap.com/erp2005_ehp_04/helpdata/en/3c/abbcf6413911d1893d0000e8323c4f/frameset.htm].
    Regards
    Narasimhan

  • BAPI for Creation of Maintenance Plan (TCode - IP01)

    Hello
    Kindly help me with the BAPI for Creation of Maintenance Plan (TCode - IP01)
    Thanks and Regards
    Avishek

    Hi
       Check Tcode: IBIP. and LSMW method and below link it may be helpful.
    [link|Re: LSMW for uploading equipment.]
    Thanks,
    Asit Purbey.

  • Not able to get RZ points for the Good Maintenance Reward.....

    Tried geek squad support they are telling me the promotion no longer exists. They also said the only eligible amount is the phone purchase with the first payment of the plan. I would say the eligible amount is the entire cost of the plan. 14.99 x 24 months. Any thoughts?

    Good morning Slownas1, and welcome to the Best Buy forum!
    The Good Maintenance Reward is no longer offered with the purchase of a Geek Squad Protection plan; however, it is a benefit we should still be able to honor as long as the protection plan in-question was eligible and qualifies.  A standard protection plan would need to have been purchased between 9/14/2008 - 7/14/2012 to be eligible and the plan could not have been utilized for any services to be eligible.  If both of those terms are met, then a request for the benefit would need to be made within 90 days of the plan officially expiring.
    Based on the information you provided in your post, it appears the protection plan in-question may have been a monthly plan, possibly for a mobile phone.  Is that correct?  If so, then it would not be eligible for the Good Maintenance Reward because mobile plans were not included.  The protection plan would need to have been paid in full at the time of purchase.
    If you have any additional questions about the Good Maintenance Reward, please feel free to send me a private message and I will see what I can do to help.  You can send a private message by clicking on the blue button located within my signature. 
    Thank you for posting.
    Derek|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Urgent: Workflow for travel plan approval

    Hi all, can anyone tell me is there any standard workflow for travel plan approval??
    also let me is there any standard workflow for plant maintenance??
    thanks in advance
    with regards,
    Raj

    Check this out....
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/d5/202038541ec006e10000009b38f8cf/frameset.htm
    -Pinkle

  • Run MRP for production order/maintenance order has been release

    Hi all,
    please tell me how to configure for running mrp for production order/maintenance order has been release. as you know, i want production order has not release will not appear in MD04. I think that is the way for running mrp will not take care about this production order has not release
    Thanks all

    Hi Hoai,
    It is impossible to exclude production order from net requirement calculation in MRP run. You may take a look at the online documentation under the PP-MRP area.
    Material Requirements Planning (PP-MRP)
       Planning Process
         Net Requirements Calculation
           Net Requirements Calculation for MRP
    But there is a way to temporarily exclude production order from MRP. That is you can set the 'delivery completed' indicator in 'Goods receipt' Tab in in production order. Please note that this order will not appear in MD04. Actually to some degree, this order could be considered as completed because ticking the indicator could set status 'DLV' for the order. But you still can execute confirmation, goods issue and goods receipt activities. This way is just a workaround. You may
    consider it.
    Or maybe you can consider the useage of BADI: MD_CHANGE_MRP_DATA to change the MRP run data to see if this could fulfill your requirement.
    Regards,
    Rachel

  • How to display field SZAEH (Start Counter Reading) in IP01 for Maint Plan

    Please let me know how i can configure field SZAEH (Start Counter Reading)  to be displayed for data entry in IP01 for Maint Plan creation. I tried Tcode OIW0 but cou;dn't succeed.
    ALl the help will be appreciated

    Jain,
      The start counter reading will automatically comeup in the scheduling parameter screen , if the maintenance plan is tied to a  counter. Isnt this not coming up?
    Regards
    Narasimhan

  • Digital Signature for Inspection Plan and Routing

    Hi,
    Can someone please help me on the topic of how to activate Digital Signature for inspection plan changes. I need to activate Digital signature functionality for inspection plan or routing. Please guide me to any link or shared documents on this topic.
    Thanks
    Vineeth

    Hi Vineeth,
    Standard SAP does not support this. Though I came across similar situation for maintenance plan, where we used BADI for this.
    Try to go through DIG_SIGNATURE_MAINT_PLAN. Consult with a good ABAPer if he can modify it some how for inspection plan.
    The links below may help you to understand the functionality [http://wiki.sdn.sap.com/wiki/display/SAPMDM/E-SIGNATUREforMaintenancePlants-MasterData(ECC6.0)] & [http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YN-IF_EX_IPRM_DIG_SIGNATURE~~~~~~DIG_SIGNATURE_MAINT_PLAN]
    In SAP, check BADI_DIG_SIG_RES_REC_PROCESS, if anything can be done here.

  • Best practice for long term maintenance ??

    still busy with the long term maintenance requirement.
    when maintaining a building my client wants to register the following
    - long term maintenance (like 15 till 25 years)
    - short term is already in preventive maintenance
    - the long term maintenance must be related to specific activitities which contains keyfigures (the keyfigures are obtained from third party libraries which can be used to calculate the estimate cost for a certain acitivity when multiplied with for instance the surface area of the object)
    - for the costplanning a report should calculate the estimated costs derived from the keyfigures
    - the long term planning should be easy to manage and activities easily be changed in time
    is there anything already at hand or an example where long term maintenance like this is implemented ?? I can't see how I can get above requirements in for instance preventive maintenance ??
    reward for usefull info
    kind regards
    arthur

    I try to make an config takslist but somehow I can't enter values when I attach the task to a preventive maintenance plan.
    I created charateristics and a class with type 300
    made a config profile with cu41
    I also can't enter values when I attach the general task to a serviceorder
    do I still miss something here ??
    hmm I made a separete thread for this since it has nothing to do with the initial problem
    Message was edited by:
            A. de Smidt
    Message was edited by:
            A. de Smidt

  • Basic Settings for Lifecycle planning

    Hello All,
    I want to maintain the basic settings of Life Cycle Planning to use Like Profile
    Transaction: /SAPAPO/MSDP_FCST1 - Lifecycle Planning
    My question is; is it a must to use 9AMATNR and 9ALOCNO characteristics in our POS?
    I have seen the sentence below in OSS note: 354660
    **If you are using a characteristic for a product and do not want to use the 9AMATNR characteristic, you must specify the characteristic you would like to use.The 9AMATNR characteristic must exist in the planning object structure if you want to use it as a characteristic for a product.Only then can a LIKE profile be used.In this regard, see the information on the /SAPAPO/FCST_LIKE user parameter in note 350065.**
    What I understand from this sentence is that 9AMATNR is not an obligatory characteristic to use in POS for the purpose of life cycle planning.
    However when I do not use 9AMATNR I receive such an error message during the maintenance of Basic Settings for Life Cycle Planning.
    *Errors have been found in your Customizing settings
    *For detailed information, see consulting note #354660
    *The basic settings cannot be saved
    *Characteristic for product 9AMATNR is not in the planning object structur
    So, does anybody know if is it a MUST to keep the 9AMATNR in the POS for lifecycle planning? May be I am doing wrong something else...
    Thanks in advance

    While in DP MPOS you are free to choose custom characteristics for location and product, there are certain DP functionalities like Promotion Planning which normally uses 9AMATNR as characteristic for Product. In such cases the DP MPOS in absence of 9AMATNR has an issue. Through this assignment of location and product in the MPOS, system knows the custom characteristic that needs to be mapped to 9AMATNR and 9ALOCNO for product and location.
    This is useful during release from DP to SNP also.
    Hope this helps.
    Thanks,
    somnath

  • Business Content for SRM 5.0 in SP9

    Hi All,
    We have BI_CONT release 702 with Level 0005. But when I try to install the transformations or any new objects like DTP, I'm not able to find many of those in Business Contents. Are these objects not yet delivered with the standard content? Do anyone have any official information on this or any OSS Note? Any planned release dates?
    Also any information on existing contnts for SRM 5.0
    Thanks in advance
    Amit

    Hi,
    But i know from the documentation of SRM 5.0 --> master Guide --->   It has been mentioned as follows
    1) THE SRM 5.0 CONFIGURATION DOCUMENTATION IS DELIVERED WITH THE  ST-ICO  150 CONTENT SHIPMENT FOR SOLUTION MANAGER
    2) SOLUTION MANAGER CONTENT REPLACES THE BUSINESS SCENARIO CONFIGURATION GUIDES , WHICH WERE DELIVERED WITH EARLIER SRM SHIPMENTS
    3) THE USE OF SOLUTION MANAGER IS MANDATORY FOR MYSAP SRM 5.0
    4) if you have a look at the Master guide for SRM 5.0 ---> there is one seperate section  available --->
    1.2 Solution Manager ---> which gives more details of the solution manager and its content.
    Edited by: khan voyalpad usman on Feb 12, 2008 7:49 PM

  • Installing BI Content objects for SRM

    Hi Experts,
    I am new to this group and i need your help for installing Business Content Objects for SRM based data flow.
    We are working for a BW - SRM upgrade project and as per our requirements we need to build 11 -  BI standard reports based on Shopping Cart, Shopping Cart Approvar &  Central contracts. We have identified the relevant data sources (0BBP_TD_SC_1, 0BBP_TD_SC_APPR_1 ,  0BBP_TD_CONTR_2) info providers/ characteristics & keyfigures from help.sap.com respective with query details.
    We have checked in BW system and do not found any objects under SRM info area (infoobjects/info providers).  As a first step we have activated the above said data sources in SRM system through RSA5 and ensured the data avaialbility through extractor check in RSA3.
    We have replicated the Meta data and got the data soruce in inactive version. We are planning to install the business content for info objects, info providers, query elements..
    We need your suggestions on  how to proceed further and what are the checks need to be done before installing the objects.
    Can any one provide an step by step document for installing the business content  objects from scratch.
    Regards,
    Saravanan.M

    Hi,
    Tty to install objects in below sequence.
    1. Application component
    2. Info area
    3. Catalogs
    4. Info objects - Chars and Key figs.
    5. DSO/CUBEs
    6. Transformations, info pack and DTPs.
    7. Bex Reports
    While isntalling obejcts from BI content, use grouping option as - only necessary objects , do the simulation and later install in background.
    If any obejcts already in active then use Match copy option there itself.
    From google you may find them,
    Use google search key as "Business Content in SAP BI".
    Thanks

  • Blocking of work center capacity for capacity planning

    How can i block a work center capacity for capacity planning during Machine breakdown( via a Preventive maintenance order)?
    i believe it will reduce machine capacity, yet how can i view this, against the previous capacity? is there a possible report or can it be shown through a transaction?

    Hi,
    In capacity header details screen not exactly as "can be used for capacity evaluation " but
    "relevent to finite sceduling"
    "can be used for several operations"
    "long term planning"
    these all indicators you can deflag this and check the results ,it may helpful to you.

  • Availability Date for SRM 7 EhP1

    Hi
    does aybody have information about release dates of SRM 7 EhP1? Has ramp-up already started? Desperately waiting for some functionality promised with EhP1 like parallel approval for BRF workflow.
    Regards
    Carsten

    Hi carsten
    All core applications of SAP BUSINESS SUITE 7 INNOVATIONS 2010 are synchronized on a common release-to-customer date and constitute the stable core.
    Enhancement packages deliver continuous innovation for this stable core. SAP BUSINESS SUITE 7 INNOVATIONS 2010 is based on Enhancement Packages for SAP CRM 7.0, SAP ERP 6.0, SAP SRM 7.0 and SAP SCM 7.0.
    Key Data
    Planned Release to customer: Second Half of December 2010
    Planned Completion date Ramp-Up: Q2, 2011
    How to apply for Ramp-Up in Q4/2010?
    Customers: Please contact the pertaining point of contact below for further information
    Learn about the new solutions (using the link to the solution page below)
    Get in touch with your Account Executive / Customer Engagement Manager
    but SAP has some big plans to satisfy the customers via EHP1
    https://websmp107.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000730505&
    please contact appropriate region contact manager in the above link.
    i could not see any info on product availablibility matrix for EHP1 for SRM
    P_SRM_71 - SAP Certified Application Professional - SRM with SAP SRM 7.0 EHP1
    Supplier collaboration with Portal, SUS and ROS +
    Implementation scenarios, system landscape and combined Business Suite roles +
    Self-Service Procurement +
    Service Procurement + Plan-Driven Procurement +
    Operational sourcing in SRM and ERP +
    Catalog Integration and concept in SRM and ERP (SRM-MDM and Punch- Out) +
    Strategic Sourcing with SRM and E-Sourcing +
    Contract Management in SRM, CLM and E-Sourcing +
    Portal Integration +
    Master data and product category concept and replication ++ ERP, SCM, PLM and Financials integration including ERP-MM configuration ++
    Approval concepts and possibilities with SRM, ERP and SAP NW Portal +
    Roles/Authorizations, UI configuration, WebDynpro Basics + and Flexible Deployment Variants "
    SRM MDM Catalog +
    System communication and ERP integration +
    Application Monitoring/Troubleshooting/ Reporting +
    User management and organizational structure +
    Workflow configuration: Process- & Application Controlled WF +
    Muthu

Maybe you are looking for