EIM Email Interaction Manager, Reports console problem

Hi,
We have problem with Reports Console in EIM system.
When we try to generate report from Reports console we get message "No data found" for every query.
In Troubleshooting Guide for EIM 4.2(4) i found this solution:
"Possible cause
Summary jobs are not active or the summary jobs fail to execute.
Recommended action:
1.    In the active database, run a query on the egplr_scheduled_task_status table, and check the status of each summary job script.
2.    From the SQL Enterprise Manager, verify the schedule of the summary jobs.
3.    Analyze the reports data from the egpl_event_history_casemgmt    table and summary tables for each report."
Table "egplr_scheduled_task_status" is empty, but i don't know what to do
Any idea what would be the issue??
Thanks,
Dusan

What jobs do you see scheduled? Look under MS SQL Agent -> Jobs node in Enterprise Manager. Are there a couple of jobs there like "populatesmy_eGActiveDB" and "populatesmysessionandarticle_eGActiveDB"?
Are they both scheduled, runnable and enabled?
Have you started the SQL Agent?
Have you made the SQL Agent an automatic process?
Regards,
Geoff

Similar Messages

Cisco Email Interaction Manager (EIM) with UCCX 8.5 ?

Anyone using UCCX 7x/8x with Cisco Email Interaction Manager (EIM) ? Looking for some hands on feedback from someone using it.
I have a customer currently using the free UCCX 7x/8x Express E-mail Manager (EEM)(it came out with 7.0(1)SR4 and adds a FIFO Email CSQ that doesn’t integrate using .aef scripts just Agent Desktop/Desktop Administrator)
They want to prioritize other than FIFO, which it appears Cisco Unified E-Mail Interaction Manager can do. They are looking for recommendations on handling email beyond what UCCX can do. They have stated moving to ICM (UCCE) is not a budget option. They have 16 email CSQs and 18 voice CSQs. The Email CSQ pretty much requires a 1 Email CSQ per Agent ratio due to the way Transfers are done with Emails to individuals, which bumps up against sizing issues/A2Q.

https://supportforums.cisco.com/message/3360647
eGain now offers a multichannel solution that integrates with Cisco Unified Contact Center Express.
For more details, please contact:
Tibor Vari
eGain Communications
Email: [email protected]
Ph #: (201) 236 8353

Reassign activities in Email Interaction manager

Hello Mates,
i need to delete an agent in Cisco Email Interaction Manager. This fails with this message. Any ideas how to delete the user?
the user that your trying to delete has some open activities or cases or suggestions in feedback mode. Please reassign them before dewleting this user.
cheers
alex

thank you mate, i could complete all the activities for the user but there is still one case which i cannot close. there are 2 activities in the case but in my current open activities these two activities are not there.
any ideas?
alex

Cisco Email Interaction Manager showing strange 'Created On' Dates

Hello All,
Could anyone tell me where EIM gets its "Created On" date and times from? I was looking into some of the Queues on EIM at about 10:50 am this morning and the emails that were in there were showing Creation times of well after 11:00 am on today's date, and I have no clue why.
The system time on the Server running the EIM software has the correct system date and time. I also checked the system time on our Mail server and that was correct as well. I have the ability to view emails that come into the Aliases configured on the Mail server before the Retriever service on EIM collects them and they are showing the correct times on there as well. So I'm not sure where EIM is getting these times form?
If anyone has any thoughts or suggestions it would be much appreciated.
Thanks in Advance,
Matt

https://supportforums.cisco.com/message/3360647
eGain now offers a multichannel solution that integrates with Cisco Unified Contact Center Express.
For more details, please contact:
Tibor Vari
eGain Communications
Email: [email protected]
Ph #: (201) 236 8353

Email Interaction Manager Pop3/IMAP ports

Hi All,
is there a way to change POP3 or IMAP ports on EIM? one customer is using 993 as an IMAP port which i beleive uses SSL.
Thanks in advance,

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
Changing the port to use Secure IMAP 993 SSL & Secure SMTP 465 TLS Encryption is not currently supported within CIM Version 4.3(2)
The standard ports for IMAP (143), POP3 (110) and SMTP (25) are all that are supported at this time.
This ability is slated for an upcoming release of CIM, however that release is not yet known.

What is the email address to report a problem with purchases?

I need to contact billing dept to dispute charges, can't seem to find how and where I do that.

Try contacting them here: http://www.apple.com/emea/support/itunes/contact.html.

HT2693 I need to report a problem with a tv show that did not download correctly. 1episode file can't be found & the other has sound & no picture. I no longer have the email invoice to file a report. Does anyone have a sugguestion on how I can proceed?

If anyone has information on how to correct an issue with a tv show file not found after being downloaded and a tv show with only sound please help. I no longer have an email invoice to report the problem. Does anyone have a sugguestion on how to proceed?

iTunes store support
http://www.apple.com/support/itunes/

Interactive report performance problem over database link - Oracle Gateway

Hello all;
This is regarding a thread Interactive report performance problem over database link that was posted by Samo.
The issue that I am facing is when I use Oracle function like (apex_item.check_box) the query slow down by 45 seconds.
query like this: (due to sensitivity issue, I can not disclose real table name)
SELECT apex_item.checkbox(1,b.col3)
, a.col1
, a.col2
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5
table_one and table_two are remote tables (non-oracle) which are connected using Oracle Gateway.
Now if I run above queries without apex_item.checkbox function the query return or response is less than a second but if I have apex_item.checkbox then the query run more than 30 seconds. I have resolved the issues by creating a collection but it’s not a good practice.
I would like to get ideas from people how to resolve or speed-up the query?
Any idea how to use sub-factoring for the above scenario? Or others method (creating view or materialized view are not an option).
Thank you.
Shaun S.

Hi Shaun
Okay, I have a million questions (could you tell me if both tables are from the same remote source, it looks like they're possibly not?), but let's just try some things first.
By now you should understand the idea of what I termed 'sub-factoring' in a previous post. This is to do with using the WITH blah AS (SELECT... syntax. Now in most circumstances this 'materialises' the results of the inner select statement. This means that we 'get' the results then do something with them afterwards. It's a handy trick when dealing with remote sites as sometimes you want the remote database to do the work. The reason that I ask you to use the MATERIALIZE hint for testing is just to force this, in 99.99% of cases this can be removed later. Using the WITH statement is also handled differently to inline view like SELECT * FROM (SELECT... but the same result can be mimicked with a NO_MERGE hint.
Looking at your case I would be interested to see what the explain plan and results would be for something like the following two statements (sorry - you're going have to check them, it's late!)
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two),
sourceqry AS
(SELECT b.col3 x
       , a.col1 y
       , a.col2 z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5)
SELECT apex_item.checkbox(1,x), y , z
FROM sourceqry
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two)
SELECT apex_item.checkbox(1,x), y , z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5If the remote tables are at the same site, then you should have the same results. If they aren't you should get the same results but different to the original query.
We aren't being told the real cardinality of the inners select here so the explain plan is distorted (this is normal for queries on remote and especially non-oracle sites). This hinders tuning normally but I don't think this is your problem at all. How many distinct values do you normally get of the column aliased 'x' and how many rows are normally returned in total? Also how are you testing response times, in APEX, SQL Developer, Toad SQLplus etc?
Sorry for all the questions but it helps to answer the question, if I can.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)

Rented 2 movies, watched one, second one kept downloading for 3 days and finally failed. I was charged for it, it never downloaded, cannot be found in "Available Downloads" and "report a problem" page NEVER loads, no email contact. Please help

Rented 2 movies, watched one, second one kept downloading for 3 days and finally failed. I was charged for it, it never downloaded, cannot be found in "Available Downloads".
When you go to "Report a problem" next to the item (Great Gatsby) on the email invoice or on the online account - it takes you to online support - if you elect problems with iTune downloads the page NEVER opens... no email contact. Please help

This is bad - I have an Apple automated response that they got my report on 12/6, 12/10 and 12/14, and I haven't heard anything from them since the 6th when I got one reply that told me to do things I tried before reporting the problem. Between the 6th and 10th I replied to their response 4 times and they ignored me, forcing me to report a problem with two more items that wont download but getting no response.
How do they get away with this kind of behavior, especially for someone with FIVE Core 2 Duo macs and thousands of dollars of of iTunes store purchases? I'm getting really ******.

I have received an email receipt charging me $109.99 for an app I've never heard of and definitely never downloaded. How do I report the problem and get a refund?

I have received an email receipt charging me $109.99 for an app I've never heard of and definitely never downloaded. How do I report the problem and get a refund?

Log into your iTunes account, then click on previous purchases then select the purchased app and then click report a problem. Then write and explain your problem and I am sure it will be considered.
Also change your iTunes password as soon as possible.

I press the report a problem button on the email receipt and it says too many http redirects help?

I can't report a problem in my email that apple sent me please help

Susiebwb wrote:
Can any one please assist me.... I paid twice for an app by mistake.... ...
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

My iPod automatically purchases apps, how can i report the problems by using email, is there emails than i can use?

I'm from Hong Kong and this is my first time using this.
In the past few months, my iPod had been automatically purchasing apps/updates/points I had not notice it until this few days when my email showed that I had purchased apps for more than $100USD.
So ireally want to report these problems to Apple about cancelling my purchases. I did once before and it suceesed. However, this time when i try to used iTunes to report the same problem about my cancelling purchases, it did not allow me and it came straight to Apple websites. I tried it thousand time, and it still doesn't work.
Therefore, my question is than is there any other way that i can contact with Apple Store such as through e-mail.
If any one knows what is the email or any other way, please reply.
Damon

Try going to Apple Support, and e-mailing them from there. If you got hacked, they will probably be able to cancel the purchases. They are great.

SMC(Solaris Management Console) problem

Hi
I am trying to start SMC for managing the users and groups.But i am getting the following errors.
bash-3.00# smc
com.sun.management.viper.CriticalStopException: javax/help/JHelp
at com.sun.management.viperimpl.console.gui.SMCConsole.start(SMCConsole.java:276)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.openConsole(Base ConsoleOptionsManager.java:752)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.redirectToConsol e(BaseConsoleOptionsManager.java:621)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.launchConsole(Ba seConsoleOptionsManager.java:167)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.main(BaseConsole OptionsManager.java:834)
Could any one help me out.
Thanks inadvance.

Instead of using SMC - why not use the format command - this utility has traditionally allowed the sysadmin to perform disk related tasks. If you plan to be "playing around" with disks on a solaris system - smc is not the tool. If you had intended to use ZFS - you're stuck with the command line (really sucks if you're dependent on GUIs). Either use the free SVM command line or get a copy of Veritas Foundation Basic Suite "free" (but crippled - limited to 4 volumes and 4 filesystems) - http://www.symantec.com/enterprise/sfbasic/index.jsp. At least with Veritas - the GUI will step you thru the entire process of disk management. I can't say that for SVM, with a bit of persistence and skill - you might not be disappointed. I prefer the command line because you can specify a myriad of parameters that the GUIs can't initutively tell you.
Storage Foundation Basic 4.1 is available on the following platforms:
* Solaris 10 x64
* RHEL 4 (Xeon, EM64T and AMD Opteron) and Itanium 2
* SLES 9 (Xeon, EM64T and AMD Opteron) and Itanium 2
Storage Foundation Basic 5.0 is available on the following platforms:
* Solaris 8, 9, 10 (SPARC)
* AIX 5.2/5.3
* Red Hat Enterprise Linux 4 (RHEL 4) on EM64T/Opteron
* Novell SUSE Enterprise Linux Server 9 (SLES) on EM64T/Opteron

HT1933 'Report a problem' link in the email with purchase receipt does not work.

While opening itunes I get an error "unable to connect to itunes",then a screen with the text: "your request produced an error.NewNullResponse".It's in-app purchase, magazine subscription.How do I report a problem if the link does not work?

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report your issue to the iTunes Store.
Regards.

HT1933 The Report a problem link doesn't work on my email receipt.

I want a refund for a piece of garbage app, but the report a problem or review link doen't work.

Yu can try contacting iTunes support via this page if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
It sounds like your son made an in-app purchase, you can turn them off on your iPad via Settings > General > Restrictions > In-App Purcahses 'off'. And depending upon what version of iOS that you have on your iPad you may also have a Require Password setting which you can set to 'Immediately' (the default is a 15 minute period during which it doesn't need re-entering).

EIM Email Interaction Manager, Reports console problem

Similar Messages

Maybe you are looking for