Error in deletion of ODS data

Hello Gurus,
We have three ODS's in our project to which we will do daily loads.
Before full upload we will delete all the present from the ODS's. The deletion process we will do automatically using process chains.
It was working fine. but from the past week we are getting an error while deleting ODS data. ITAB_DUPLICATE_KEY - Error, Please explain me why we are getting such error and how to rectify it.
We tried to delete the requests manually one by one from ODS.
The data is deleting from the Active table but still it is showing that request in the <i>Manage</i> screen of ODS.
How to rectify this error. kindly give me some inputs.
Regards,
Ala.

Hi,
In the BW server you can try one of the report program to delete the entire requests in infocube or ods.
Report program is RSDELPART1
Just run this report program in se38.
In the selection screen of the program,give the name of the data target from where you need to delete all the existing requests.
This technique was once used.
Please let me know whether it works.

Similar Messages

  • Error in Activation of ODS Data

    Dear All,
    I am getting this error msg while activating ODS Data, It says its not able to execute one of this statements while activation
    Program Name: GPBUJ6PU7X5TA8TLJSDOPVSU2Z7
    The program terminates at this line
    Types corresponding to Change-Log-structure
      l_s_chgdata TYPE  /BIC/B0000103000,
    The DDIC does not have an table name by /BIC/B0000103000 which the program is trying to refer, Kindly do provide me your help and input on this.
    Thanks.
    Fayak.

    Hi Siggi,
    Thnx for your reply, I did as suggested by you, activated the ODS and update rules again but it was not able to activate the data again I ran the RSRV as suggested by you i got an list of errors
    Test for Activation Program
    Active generated load program not available
    Activation Program is not Current
    Lines in temporary program: l_s_chgdata TYPE /BIC/B0000103000
    Activation program has to be generated again
    I ran the correct error but not to any avail, could you kindly guide me on this, I was previously loading data to this ODS successfully from a 300 client now I am trying to do this from an 400 client and I am facing this error.
    Thanks,
    Fayak.

  • Error during activation of ODS data

    Hi all,
    I am getting error during activation of ODS data.
    Error: Error occur during activation.
    How to check , where that error exactly occurs.
    Appreciating any response.

    Hi Santosh,
    SM37 is mainly for monitoring the back ground jobs...... both in R/3 side and BW side this is same.. just for monitoring the background jobs... fisrt by using SM36 basis people will schedule in background.. and we just identify.. which are completed and which are not completed... in SM37.
    there are various status they are
    PLANNED
    RELEASED
    CANCELLED
    ACTIVE
    FINISHED
    READY
    Check this link
    http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8016505211d189550000e829fbbd/frameset.htm
    In Sm37 u can see the different options for background jobs, like Scheduled, released, ready,active, finished, canceled.. If u want to know the Status of the current running job, U just type the job name, user name then click execute(F8).
    hope this helps
    regards
    Karthik
    Assign points if helpful

  • Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL

    Friends,
    I have situation :
    Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL.
    when for the above ods and the data source when trying to delete the request whole data got delted.
    All the data got deleted in the fore ground. no background job has been generated for this.
    I ma really worried abt this issues. can u please tell me what should be the possibilities for this issue.
    Many Thanks
    VSM

    Hi,
    I suppose you want to know the possibilitiy of getting the data.
    If the entire data is being deleted, you can reload the data from source system.
    Load the setup table for your application. Then carry out init request.
    Please note that you would have to take a transaction-free period for carrying out this activity so that no data is missed.
    Once this is done, delta queues will again start filling up.

  • Error while deleting the Master data

    Hi Friends,
    i am getting the below error while deleting the data from a master data:-
    The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
    Do you want to delete the data records that are no longer in use?
    Could you guide how should i proceed to delete the data.
    Regards,
    Hirdesh

    Hi Hirdesh,
        If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
    Regards
    Prasad

  • Error in SQL Statement (ODS data loading Error)

    Hello Gurus...
    I am trying to loading the data Info Source To ODS in my ODS Key Figure Z_IVQUA (Invoice Quantity)
    is getting the Error Message Data shows 0 from 0 Records.
    I was Remove the Key Field from ODS Then try to load the data but i am getting same Error..
    Error in SQL Statement: SAPSQL_INVALID_FIELDNAME F~/BIC/Z_INVQUA
    Errors in source system
    Please Suggest....
    Thanks
    Prakash

    Hello All...
    Really appreciate if you can give me some advise. Thanks.
    Prakash
    Edited by: Prakash M on Jan 14, 2009 2:14 PM

  • ABAP Dump ITAB_DUPLICATE_KEY deleting ODS data

    Hi,
    We've got an abap dump while trying to delete the ODS data content. The abap dumps registers a ITAB_DUPLICATE_KEY in the program SAPLRSAODS function module RSAR_ODS_GET. We're using BW3.5 patch 4.
    Tried looking at the OSS notes but could not find any relevant oss notes that is on BW3.5. Has anyone manage to solve/experience this issue ?

    look at these previous threads
    What does this runtime error mean?
    "Runtime Error ITAB_DUPLICATE_KEY"
    ITAB_DUPLICATE_KEY dump in the PSA tree or search
    Hope it helps.
    Regards

  • ITAB_DUPLICATE_KEY error while deleting ODS data

    Hello again
    i am getting ITAB_DUPLICATE_ERROR message while deleting data from ODS.
    kindly let me know how to proceed.
    as ours is full load it is very important to delete the previous data.
    Rgds,
    Ala.

    I also am getting the same error under the same circumstances.  I understand that RS_FIND_ISOSMAP_DUPREC will give a list of duplicate records in RSISOSMAP.  How then are the duplicate records deleted?
    Any ideas on what caused the duplicate records to be created?  I did have some trouble connecting the source system to BW.

  • Error Activating the ODS data

    Hi Guys,
    I am facing an error while activating the data in the ODS.
    The data is loading perfectly fine but when activating the ODS data the following error is coming
    <b>Request REQU_3ZI9CZ369HR6SM49OL9ULRVKM, data package 000031 incorrect with status 5 in rsodsacstreq
    System error occurred (RFC call)
    No confirmation for request ODSR_3ZI9DUVOMM02L1I777X5YX9QU when activating the ODS object PA_ODS1
    There is no PSA for InfoSource 8PA_OA001 and source system BWPCLNT641 ( The data laod is without PSA )</b>
    This is happening after we had a BWQ refresh .
    I thought this has something to do with the BASIS guys but they say they checked everything.
    Need Help

    Hi Sidhu,
    There were red requests in the ODS but I deleted them and tried activating the green requests , even when there are only 4 records it is not activating the data.
    I checked the RESREQDONE table but I dont see these requests in there.
    I checked the SM58 there I saw a lot of errors
    <u><b>ALEREMOTE    RSAR_TRFC_DATA_RECEIVED       BWQCLNT641    10/17/2005 18:50:48 ERROR REQU_3ZHNIS265F9F6HJQ8PY838046 PG# 21 In BW</b></u>  
    one line in that is this . can u throw some thought on this. when I try to execute this LUW it says that function module RSAR_TRFC_DATA_RECEIVED doesnot exist or exception raised message. I got these yesterday but today I got only one and when I executed that LUW it gave me the same message but that error message is not showing now
    Regards
    Majeed

  • Error while deleting master data (Message no. RSDMD118)

    Dear all,
    I am performing a test to create and delete new Company Codes in Consolidation Workbench.
    Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
    Error while deleting master data
    Message no. RSDMD118
    Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
    Appreciate assistance to troubleshoot and resolve this error.
    Thank you.

    Thank you both for your replies.
    I am sure those are not the case here as I deleted the Company immediately after creating it.
    Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
    Use of: Company UAT1 UAT Company 1
    Number of Uses Found: 0 
    However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

  • Error while deleting the Data Source

    Hi gurus,
    I am getting an error while deleting a Data Source - "Source system XXXXX  not found RSAR205".
    but that source system no more available.
    Is there any way to delete the Data Source.
    Thanks in advance.
    CK.

    Hi,
    That source system deleted.
    Using RSDS also same error.
    Thanks,
    CK
    Edited by: CK on Oct 3, 2008 11:37 AM

  • Error while deleting data from a write optimized DSO using a Process Chain?

    Dear Bwers,
    I am facing a strange error while using process chains to delete data from data target which is a write optimized DSO. The process shows as failed but the data gets deleted in the DSO. The error message is as below. Did anybody have a similar problem? Any suggestions.
    Thanks
    Raj
    Error while deleting content of InfoCube/DataStore object ZLSD_G03
    Message no. RSDODSO153

    Please, check if you get any short dump in ST22 related to this issue.

  • Data Laoded successfully, giving error while activating the ODS

    Hi,
    Process Chain is running daily for  loading and activating the data into the ODS.
    Today the data loaded successfully but the data is not getting activation. I then tried to activate the data manually but still it not trying to get activated.
    I check it the Status tab, it is also giving the same Procedure to activate the data manually.
    I checked in the Details Tab. It is displaying Errors as :
    1. Error getting SID for ODS.
    2. Task 0049 for parallel SID assignments terminated with errors.
    3. Activation of data records from ODS terminated.
    4. System error occured (RFC call)
    Please any one help in this issue.
    Thanks & Regards
    Jagannadha Raju

    Hi,
    This is probably because you loaded transaction data before master data and tried activating it.Load the relevant master data, perform the change run and retrigger activation.
    It should work.
    Else there is a workaround. You can try editing out/blanking out those values in PSA and loading and activating. This will work.
    Also try repairing the ODS object in RSRV.
    When you activate multiple requests tick the activate serially check box.
    thanks,
    JituK

  • Error while deleting data from 0BPARTNER!!!!

    Hello All,
    I'm trying to delete the data from 0bpartner master table.
    I went into the contents of 0bpartner..selected the record i want to delete and after i delete the record i saved it, but it is not saving and i'm getting the following message.
    InfoObject 0LONGITUDE (version A) is not compunded
    Please suggest me if there is any other way to delete the data...
    Thankz in Advance

    Hi,
    Step1
    in the infoobject 0BPARTNER . go to the Business Explorer tab
    Step2
    Go to Geographical type and set  non Geo characteristic and activate the infoobject.
    Step3
    Now try deleting the data for 0BPARTNER hope you will be able to delete it
    why error is poping up ??
    LONGITUDE and LATITUDE attributes are used. ALTITUDE, PRECISID and SRCID are reserved for future use.
    If you reset the geographical type of a characteristic to Not a Geo-Characteristic, these attributes are deleted in the InfoObject maintenance.
    hope you can solve the Issue
    in case if you really need those 3 object then you need to make the setting looking at this document below and ten delete the master data(its based on your requirement)
    http://help.sap.com/saphelp_nw04/helpdata/en/3b/7c91931bed374ee0000800091c1b0e/content.htm
    Santosh

  • Error while deleting data source : Message RSO414

    Hello Guys,
    We have activated data source 2LIS_04_PKKANBAN and entire standard BI content . When i tried to extract data, i got 0 records initially and after that i came to know that some functions needs to be activated in ECC to extract KANBAN data.
    We activated some function and deleted & filled setup tables for KANBAN and i can see data in RSA3 (368 Records). Then i tried to extract data into SAP BI. it took  me 20 minutes but ended with error. "Data Source needs to be activated again as it was changed (We just activated one function only) nothing changed to data source" I activated data source again in ECC and replicate on SAP BI side but i am not able to get it in activated mode.
    I tried to activate it manually and it takes 20-25 minutes but i am not able to activate it and getting error "Error when activating DataSource : MESSAGE NO  RSO414 " "Error when resetting DataSource 2LIS_04_PKKANBAN to the active version". i also can't delete data source as when i try to delete it, i get the error "ERROR WHEN DELETING DATA SOURCE : MESSAGE NO RSO414" .  What to do in this situation ?
    Regards,
    Komik Shah

    Hi Rahul,
    I tried it but it didn't help me.
    Also there is no FM in SAP BI called RS_DATASOURCE_ACTIVATE_ALL. I have activated  data source in my ERP system  and replicated same on BI side as we don't have standard Transfer Rules or Transformation, i can't use RS_TRANSTRU_ACTIVATE_ALL .
    Regards,
    Komik Shah

Maybe you are looking for

  • How to use 'bash' command in java?

    Hi, I am using Linux operating system when i run the following code, 'test.sh' not started ================================================================ String cmd = "bash \"/home/kulandaivelu/Desktop/works/other's works/test.sh\""; Runtime.getRun

  • RSEOUT00 failing with "Could not write IDoc to file" TPRI_DEF table

    Outbound Idoc processing fail with the following error: Could not write IDoc to file Message no. EA299 Diagnosis The system could not convert data from the data record 000027. Procedure Check the port definition of the receiver port. You can use the

  • TS3274 when I click on the video app, the screen goes black

    When I click on the Video Button, the screen appears black.  I just synced my iPad and it is still not working.  Any suggestions?

  • Create a list

    How do I creat a list of records. I can't use an array because the groupings have different number of records and the records have different data types. For example a record consists of a group, section, and a task/test. How do I create a list of the

  • Query about integration of third party database with SCE

    /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in