Error in the data in Standard LIS structure S282

Hi Guys,
I need some advice on the following issue :
1.I have a process order that has fields Planned quantity and Withdrawal quantity.
2.Now, this data is getting passed into standard LIS structure S282.
But, in S282, I see that the values of the 2 fields have exactly doubled for the same Order..( which is in turn gettin pulled into BW )
Can anybody please let me know how do I go ahead for having the right value in S282??/
Thanks,
Punkuj

There is nothing wrong with the TID's or anything like that. There is also no selection criteria in the infopackage.
When the Delta fails, the error occurs under EXTRACTION in the monitor. It seems to be successful under TRANSFER and PROCESSING in the monitor, which I find strange. Also, I run a new Delta Init with Data Transfer, and that works just fine.
So, I'm not sure what it could be?

Similar Messages

Error in the Data Transfer phase

Dear all,
During the Data Transfer phase, we get 117 errors.
The error for each failed process is:
Execution of program /1CADMC/OLC_500000000043327 failed, return code 3
Message no. DMC_RT_MSG046
RC = 3: Error writing the data
I compared the table structures in source and target system, and they are the same.
Therefore I suspect that something went wrong during the Data Selection phase.
Does anyone else have this problem?

Hi Nicolas,
Error code 3 suggests that there was a problem writing data to the receiver system. This may happen due to various reasons (For example: No tablespace available in the target system). To be sure, please check the System Logs (SM21) and Error Logs (ST22).
In oder to check if something went wrong during data selection, you may refer to the selection logs for the tables for which data transfer is aborted.
In case you are not able to identify the issue, kindly open an OSS Message for faster resolution of the problem.
Regards,
Suman

Can i change or modify or insert the data in standard tables

hi gurus
can i change /modify/insert the data in standard tables
witout using module pools
plz send the progem lines also
it ll be very helpful to me
thank you
kals.

Hi Kalyan,
It is not advisable to update standard tables directly or through your own module pool programs also. The reasons are,
1. It is difficult to find out how many tables are updated through the transaction. if we leave one table also as Mr.Andrew said data integrity will be lost.
2. Authorization objects and profiles will be totally bypassed if data is inserted through custom programs.
3. Complete data validation is not possible. There are certain validations that are executed through code and appropriate errors and warnings are shown in the transactions. If we insert data directly to the tables anything can be inserted into the table field violating all the validations unless we have field level check constraints on the tables at database level.
4. User Exits and BADIs that are implemented for specific business requirements and checks will not function on the data.
5. Update & Transaction locks will not work properly.
Due to above reasons, definitely you should avoid updating standard tables directly.
There are many tools such as LSMW Recordings, BDCs, BAPIs, IDOCs, Upload Interfaces available in SAP through which bulk data can be updated without using relevant transactions.
You can collect data from end users in text or excel sheets or through custom programs in required format and upload at once through above mentioned tools.
Regards,
Hema

Error reading the data from the remote cube

Hi all,
When we try to get the data for remote cube from LISTCUBE, we are getting the following msg.
1) Messages for DataSource 9AUPA_DP_HK_01 from source system AD1CLNT100
2) 224(/SAPAPO/TSM): No planning version selected
3) Errors have occurred while extracting data from DataSource 9AUPA_DP_HK_01
4) Error reading the data of InfoProvider UICHKRMTC.
Any Inputs?

Hi,
Check whether the sourcesystem is responding.
And also in the error mesg: 224(/SAPAPO/TSM): No planning version selected
It seems you have not selected any planning version. Give any planning version in the listcube selection screen and execute.
Regards,
Ravi Kanth

Invalid data status error during the data extraction

Hi,
while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
how can i rectify the data extraction problem..can you advice.
Thanks,
Dhanush

Sir,
In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors.

Error in the Data Selection - Errors in Source System RSM 340

Hey Everyone,
I'm having an issue with loading a Delta for 0MAT_PLANT_ATTR. This is the second night it has happened, where I get the error "Error in the Data Selection". This error happens in the EXTRACTION part of the Monitor. And, we cannot run another Delta to see if it'll work, we have to delete the old Delta Init, and run a new one. The other error is "Errors in Source System - RSM340". That's as much it gives.
Could anyone suggest why this would be happening? I checked RSA3 in R/3, and no errors on the extraction. I also checked sm37 against the job that loads that data, and it completed successfully. I honestly don't think there's an issue with the data. We cannot have this happen often, and I just need to know if this is something that can be corrected.
Thanks,
John

There is nothing wrong with the TID's or anything like that. There is also no selection criteria in the infopackage.
When the Delta fails, the error occurs under EXTRACTION in the monitor. It seems to be successful under TRANSFER and PROCESSING in the monitor, which I find strange. Also, I run a new Delta Init with Data Transfer, and that works just fine.
So, I'm not sure what it could be?

Error reading the data of InfoProvider /APC/FINGLV01

Hi All,
Via RSA1 I wanted to check the data but met the following error
/APC/FIAGLACC_TD01_FQ9CLNT001: The application running deliberately caused an abo
Error in substep Error reading the data of InfoProvider /APC/FINGLV01
Also, in all oview view, it displayed "No data available" error.
Error msg : Error reading the data of InfoProvider /APC/FINGLV01
Message no. DBMAN305
Diagnosis
Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors.
Thanks in advance
regards,
Anil
Edited by: Anil Kumar Koppuravuri on Oct 16, 2009 3:53 AM

At this point of time, we are unable to implement any patches, we would like to know exact reason behind the error, so that we can correct it with out implementing a patch.
And also the problem is not Consistent, Some time it works fine (50% Time it works fine)
I really appreciate your time
Message was edited by: TR Palle

Can't open aperture 3, warning box comes up," warning there was an error opening the data base for the library /pictures/aperture library .aplibrary Whats up?

I have had Aperture 3 loaded on my computer for a while now. Never had any problems till tonight. Restarted my computer and went to open Aperture and a "warning" box poped up, There was an error opening the data base for the library /picture/aperture library ap library. Then a "quit" button.
What is going on and how can I open my aperture. I have pictures that need worked for clients. Help!

Have you run through the steps in Aperture 3: Troubleshooting Basics. If not that's always a good place to start.
If that doesn;t resolve the problem when you post back describe your hardware and software setup.
good luck

Error message: The data for filename was already added to the form

I recently modified an existing data-collection PDF - only mod was to add some additional pull-down menu options in two fields. I went thru the Distribution wizard, tested the revised form, added the PDF to the Responses file...everything seemed fine. Next day, I distributed the revised form, and had 22 submissions. When adding the 22 submissions to the Response file, 6 or 7 bounced with the error message "The data for <filename> was already added to the form", even though that was not true. I went back, cleared all, and added one of the "bad" files to the response form. It went in OK, but I could not add another "bad one". Although several of the forms may be submitted by the same person, the data is different in all of the submissions, plus, we've been doing this procdure for over a year and never had an issue until now.
The original form may have been created in Acrobat X, and I have Acrobat 9 Pro. Not sure if that is part or all of the answer. Thanks for any insights...I saw a posting in the Reader side, but I can't see any answers.

Hi
According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
Change Data Source dialog. If not, you need to install
SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, you can review the following link:
Working with SQL Server Compact in Visual Studio：http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
Thanks
Lydia Zhang

EVDRE encountered error retrieving the data from web Server

Hi,
I know this is the common/generic error message, following is our scenario:
We installed BPC NW 7.5 on our production box and configured F5 load balancing for two .NET servers.
We are getting the error "EVDRE encountered error retrieving the data from web Server"when we run the report EVDRE on APSHELL (original Appset). This is the fresh installation:
The workaround "Clear Local application information". Even this works only sometimes.
Is there anything else we should have configured on using two .NET servers?
Please suggest.
Thanks

hi Nagesh sorry for the delayed reply..
We changed some of the parameters at F5 switch like sticky time, timeout..
And the MDXPARSER connection to one of out application server was failling, thats why we did not had this issue consistently.
When ever the request goes to that app server fails. It took a lot effort to notice this since we were assuming the F5 switch was only causing the issue.
Thanks

BEX query error---Error reading the data of InfoProvider

Hello all,
we are getting the following msg when we execute the query-
Error reading the data of InfoProvider ZEUDPR01
Errors occurred when extracting data from DataSource 9AEU_DOM
Short Text: Error for COM routine using application program (return c
Parameter: 1028533- LC kernel
Message in Source System: E102(/SAPAPO/OM) ...
Short Text: COM - error Unknown
Parameter: Unknown
Message in Source System: E001(/SAPAPO/OM) ...
Messages for DataSource 9AEU_DOM from source system PA1CLNT100
Errors occurred during parallel processing of query 4, RC: 3
Error while reading data; navigation is possible
Row: 54 Inc: WRITE_MESSAGES Prog: CL_RSDR_AT_QUERY
Found
This is the error observed for a particular selection only..for rest of the selection we get the data correctly.
Please help with the possible causes of error.
Thanks,
Pallavi

Hi Pallavi,
How did you manage the pb?
we have the same error after Stack 21 (SP23)
we could not run query.
Thanks.
John

Error running query - 'Error reading the data of InfoProvider 0TCT_VC01'

Hi,
I have worked through all the steps to activate BI statistics in our system (Netweaver 2004s SAP_BW 700 BI_CONT 702) yet some of the queries are not working.
Specifically when I run the query 0TCT_MC01/0TCT_MC01_Q0131 I get an error that reads:
Error reading the data of InfoProvider 0TCT_VC01
There is still no data source assigned to VirtualProvider 0TCT_VC01
Any help on how to resolve this would be appreciated.
Thanks.
Dyllan

Did you install the underlying basic cube for the virtual cube(FM) to read the data from? That shoudl be 0TCT_C01- I guess

Error assigned the Data and Safety Hygiene

Hi guys
Currently I have a problem with the module IHS (occupational health and safety) of SAP EH & S. When I choose the work area assigned to the Data and Safety Hygiene is showing the following error:
Internal program error; (SAPLCBIH_LB15_DIALOG SAPLCBIH_WA00 ERROR_C1AX_CLDLG_OPEN 0)
Message no. C$153
Diagnosis
Internal system error
Procedure
Notify your system administrator.
Error data
SAPLCBIH_LB15_DIALOG
SAPLCBIH_WA00
ERROR_C1AX_CLDLG_OPEN
0
I tried to solve the problem, doing the following activities:
1. I upgrade the component EA-APPL up to its last version, as suggested by the note 1375848 "EH & S classes and Characteristics".
2. I applied the note number 1146700 - "Transferring the standard database structureu201D, I applied the first method "IMG activity "Adopt Standard Specification Database Structure." But the error persist.
Please I need your valuable help to solve this problem.
Thanks,
María Garcí

Answered by the posts

Error loading the data into ODS - Message no. BRAIN060?

Hi,
I am getting following error while load the data from flat file, data loaded successfully from flat file to PSA but I got following error while updating the data from PSA to data target:
Value '010384 javablue' (hex. '30003100300033003800340020006A0061007600610062006C') of characteristic 0PO_NUMBER contains invalid characters
Message no. BRAIN060
Diagnosis
The following standard characters are valid in characteristic values as default:
!"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
Characteristic values are not allowed if they only consist of the character "#" or begin with "!". If the characteristic is compounded, this also applies to each partial key.
You are trying to load the invalid characteristic value 1. (hexidecimal representation 30003100300033003800340020006A0061007600610062006C).
I am trying to load Value '010384 javablue' to "0PO_NUMBER" info object for ODS with in one row with some other data.
Any idea or any input to resolve this issue?
Thanks in advance for any input.
Steve

Thanks Soumya, I have maintained the upper case letters, but I am loading upper and lower case mixed to PO number? and it is not working. What is the solution to this? If I set lower case property to the PO number infoobject, it won't accept upper case. If I uncheck the lower case then it won't accept lower case letters. I cannot add upper and lower case letters in RSKC, because it accepts up to 72 characters, I have already have more than 60 characters (special char, numbers and 26 upper case letters).
I have already tried transfer routine but you can either convert to lower or upper but it doesn't work. we need both uper and lower case for po number, and R/3 is accepting it. why BW doesn't accept both?
Any idea what can be done?
Thanks in advance for your help.
Steve

How to populate the data in purchasing LIS tables - S011 and S012

Hello,
While Running the report mc$g, I am not getting the values into invoice column. Please let me know if there is any setting I need to do in IMG to populate the invoice data.
Thanks,
Aditya

Hi,
Note 433518 deals with most known problems in relation to
updating infostructures S011 and S012. Sometimes when a new support
pack or upgrade takes place and a statistical set-up does not
inconsistencies can occur.
S011 forms the data basis for the purchasing group analysis.
S012 forms the data basis for the material groups, vendor and material
analysis.
The key figures in the Purchasing Information System are updated when
the following three types of events occur:
- Purchasing document (purchase order, scheduling agreement, contract,
inquiry/quotation) create/change
- Goods receipt for a purchase order, scheduling agreement
- Invoice receipt for a purchases order, scheduling agreement
You can find further information about updating in the Implementation
Guide for the Logistics Information System.
For more information on PURCHIS, please visit SAP's online help. You
should find all the information you are looking for there.
Can you please review the following notes as a possible solution for
your issue :
501416 Purchase order changes are updated incorrectly in S011/S012
459450 FAQ: Logistic Information System (LIS) in Purchasing
Report RMCENEUA is used to set up statistical data for Purchasing
information structures such as S011, S012, and S013.    The best answer regarding information about reorganizing statistics in program RMCENEUA / transaction OLI3 can be found in the attached   note 64636.
Regards,
Edit

Error in the data in Standard LIS structure S282

Similar Messages

Maybe you are looking for