Error message after using new itunes 11.0.0.163

Every time after I sync & close the itunes app from the PC. I got this Error message "Apple Push has stopped working" new itunes version: 11.0.0.163. Can anyone help??

See if the troubleshooting for 0xE error codes on this page helps : http://support.apple.com/kb/TS3221

Similar Messages

When I try to open my iTunes an error message appears saying "New iTunes Library". What should I do?

When I try to open my iTunes an error message appears saying "New iTunes Library". What should I do?

Hi!
Thanks for contacting us today! I understand you are having issues with updating, and using the device.
I believe that we are aware of the update issue however, it is ultimately the carrier/ manufacturer to provide updates. Please contact the respective company for assistance.
As for device using, and things not working. Please provide us with more details. (Note: the bug may have already been fixed, but is available in a later update).
Thanks!

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created.
This in SharePoint 2013 Farm.
What should I do?
1- I did a DisableLoopBack and set the value to "1".
For hostname do I have to do : 111.111.111.111 (sample) and serversp2013?
P.S. I fixed this issue once, long time ago and I forgot how it ... be done.

Hi,
For troubleshooting your issue, please take steps as below:
1.Go to IIS, make sure the web application is actived.
2.Go to IIS -> Applicaiton Pools, make sure the application pool related to your web application is started.
Reference:
http://support.microsoft.com/en-us/kb/926642/en-us
http://www.techrepublic.com/forums/questions/cannot-browse-created-web-application-site-in-sharepoint-services-30/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

Help! Still get error message after installing new hard drive

The original problem is below and thought that it would help to include it to see the initial problem.
I went out and bought a new hard drive (500gb) and installed it in my laptop. I went to use the restore disks and I got the same exact error mentioned below. I used a set of disks that I copied from the original recovery disk and it still did the same. What is the error code and how can I fix this!!
Please help!!
I have a Satellite A215-S7444 laptop and everytime I go to restore the drive to it's factory settings using the Toshiba recovery wizard I get the following error: ERROR: 03-EEEE-000, AN ERROR HAS OCCURRED, PRESS [OK] TO TURN OFF COMPUTER.
Just a note, I have used my recovery disks to restore the factory settings before with no problems at all, now I get this message. All the files are accesible on the CD and I have no virus' on my computer.
Lastly, the image part of the drive (The one that is like 1.5 gb) which is usually visible is not any more and has not been for a bit when you should see it when you open "My computer". You can however see it when I go to "Administrative Tools-Computer Management." It states that the drive is Healthy (EISA Configuration), type is basic, and there is no file system associated with the drive and there is no drive letter for it either.

Thanks for your quick reply! I was wondering if anyone would reply!
I made the copies on a suggetion that the original may be scratched or something so I figured what the heck? I did format the hard drive though. It is a Seagate 500gb hard drive. I only formatted the whole drive and figured that the restore disks would make the additional partition.
Aside from that, it's the same error message that I had on the original drive. The original drive and OS works (Vista), but I wanted to restore it because I just wanted to wipe everything and start clean. What can be causing the error message, and what IS the error message?
Anymore suggestions or help would be great as I am in desperate need of getting my computer back to working.
Thanks again for replying!

Error message when downloading new itunes

I get an error message when trying to download the new version of iTunes. It says I need to contact my systems administrator because I dont have authorisation. I have already uninstalled itunes and deleted it from my programmes but neither of these have worked. please help!

It says I need to contact my systems administrator because I dont have authorisation.
What's the precise text of the error message, please? (There's a couple of different ones I can think of that you might be getting.)

Window - No Disk error message after update to iTunes 7.1

I updated to iTunes 7.1. After turning on iTunes for the first time after the download, I get a box that says "Updating iTunes Library". During this process, I get the dreaded error message: "Windows - No Disk" I clicked on it a few times and it went away. Then it came back and no amount of clicking would make it go away. At this point, iTunes no longer responds. I have gone thru this process now about 5 times.
What is the fix?
Does Apple answer this issue anywhere or is it left to its customers to speculate about this stuff?
Thank you fellow consumers.
David
dell laptop Windows XP

Do you mean like it says Windows-No Disk in Drive, please insert a disk? That type of message?
Rachyl

Error Message 2001 with new ITunes 8 (for Mac) & IPhone 2.1

Same general subject as many of tonight's posts. I updated to ITunes 8 & IPhone 2.1. There was some sort of problem during the latter update and my phone now has the "Cord &ITunes logo" with no emergency switch. When I connect the phone to the Mac through a USB, ITunes says that a recovery was stopped and that I must recover. So I hit recover but before the recover finishes it replies with Error message 2001 that it couldn't complete.
This occurred on a relatively recent Mac. My only goal is to get the phone working - I'll restore my settings and sync the music later.
Thank you
Tom

I don't have that same problem, I was able to download the new Ipod Touch software, but now that I have iTunes 8 and the new Ipod Touch software, it won't let me sync my Ipod. Any info would be great. When I try I get this message:
The Ipod "Matt's Itouch" cannot be synced. An unknown error occured (13213).
This just started happening this afternoon (I downloaded everything this morning.

Blue Screen error message after using Rescue and Recovery.

Good morning - I unfortunately had to use the IBM Rescue and Recovery feature to restore my factory settings. However, now my computer is giving me a blue screen error during the startup process. Unfortunately it is not on the screen long enough for me to get too much information from it, but I have been able to get win22n51.sys as being some sort of error message. If I start the computer in safe mode it will load without the error. If I use the safe mode plus networking it gives the error. So I'm assuming it has something to do with the network drivers?
I would appreciate any ideas you all have for resolving/further diagnosing this problem.
Thank you!

Hello,
Perhaps this Lenovo knowledgebase article, "XP Crash: System may hang or restart with a previous version of the Intel PRO 2200BG Mini PCI adapte..." will be of help to you in resolving the problem?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Error message after using non HP ink

I replaced my ink carteridges with non hp ink. worked fine for several months, now all of a sudden i have an error message and the error code changes every time i turn the printer off/on. tried to google the error codes but no record of said codes. did i jack up my printer by using no hp ink? When I lift the lid to change the ink, the ink holder stays to the right....it wont move to the left so i can take out the ink cartridges

FYI
See link for HP's warranty statement on cartridges & printheads
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00206040
What this warranty does not coverThis warranty does not cover HP ink cartridges or customer-replaceable printheads that have been refilled, remanufactured, refurbished, misused, or tampered with. If failure or damage to ink cartridges or customer-replaceable printheads is attributable to the use of a non-HP, expired or refilled ink cartridge, or to the use with a non-designated HP or unauthorized OEM printing device, HP is not responsible for the cost of replacement or refund of the purchase price.
Also see info on printer warranties from the Consumer Choice Info site...
http://www.consumerchoice.info/warranty.htm
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Error Message After Using OnyX

Hi: I just ran the maintenance utility, OnyX and got the following error message when it completed: Can't get <<class bhit>>of1 (-1728)
Would know what this means, and is it significant? Also, could this be why I occasionally get a Blue Screen when I wake up the Mini and I have to unplug the Mini and reboot it to have a normal screen"? Thanks, Jerry.

-1728 isn't listed.
This error message seems to be a bug, and has been corrected in OnyX 1.7.1 (AppleScript Error - Can't obtain "class bhit" of 1. (-1728) - corrected). The latest version of OnyX is 1.7.3.

Error message after installing latest itunes

Hi,
I have just downloaded the latest version of Itunes and after quitting tunes & retrying, because the UK store will not load(WHY???). I get an error msg. as follows "applesyncnotifier.exe"
core foundation.dll not found. Any ideas anyone.
Gramps

One other suggestion I've seen is to uninstall the Mobile Me Control Panel. That seems to have helped some people with the DLL issue.
Whether or not that will help with connecting to the iTunes Store I don't know. If that's come up only since the update, are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? Some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure. If you have Norton, you can find instructions for that utility on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
Regards.

Error message after updating to iTunes 9

I updated my iTunes to the latest version- iTunes 9. After installation, I get message: **yBrowser.exe: Entry point not found**. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library sqlite3.dll. I re-started my PC and the message came up: *iTuneHelper.exe- Entry point not found*. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library sqlite3.dll

Hi
I had this problem.
I fixed it by downloading a new version of SQLite3.dll.
Find the old one in the System32 folder replace it and re boot.
I got it from here
http://www.dll-files.com/dllindex/sqlite3.zip?0VHfQ0VFmQ
Worked for me but try at your own risk
Thanks to GSR852 from Xsellize for pointing me in the right direction.
Cheers
Mark
Message was edited by: wombatsev

Error message after creating new responsibitiy on new Operating Unit

Hi All,
Steps to Reproduce:
1- Add new Legal entity
2- Adding new operating unit from (define organization) with the organization classifications :
a. HR Organization
b. Operating Unit
c. Company Cost Center
3- Run the request “Replicate Seed Data”
4- Adding the new Operating Unit in company all Operating units security profile
5- Adding the security profile for the new Operating unit
6- run the request "Security List Maintenance” for “, ALL_PROFILES, , , ALL, , ,”
7- Create new responsibility
8- In profile option at the responsibility level add the operating unit and the security profile for the new responsibility
9- Add the new responsibility to an existing user
10- the Error "AP_FINAP_NOT_DEFINED" appearing when try to open any form
thanks in advance,

From Oracle Support:
*R12: APXINWKB : Unable to Create New Invoices due to AP_FINAP_NOT_DEFINED for Security Group [ID 1092873.1]*
Run the HR concurrent program Security List Maintenance after creating a new Security Profile.
Be sure that the parameter "Generate List For" is set to "All security profiles".

After years of using iTunes on my G4 suddenly it won't open. Error message says "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes". What do I do?s

After years of using iTunes on my G4 suddenly it won't open. Error message says "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes". What do I do? I have been attempting to move my Library to a newer MacBook Pro.

The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

Error message after using new itunes 11.0.0.163

Similar Messages

Maybe you are looking for