"ESC" event keycode not detected in document.keydown listener while exiting fullscreen mode

I have a code to fire on exiting full screen mode.
Therefore, i bind it to :
# (window.document).keyup(function(e) {
# if(e.keyCode === 27 ) {
# // do something //
Now, When i am in fullscreen mode,
1. When i press "ESC", Fullscreen mode exits but my function does not gets fired.
2. When i press "ESC" after fullscreen mode have exited, My function gets fired.
That means "ESC" event was not propagated to code when browser was in fullscreen mode.
( * This works correctly in chrome )
3. This is bit too much too ask, but can i bind browser's exit full screen button which appears at the top ??

If you are using HTML5, I think the way to do is to bind with the fullscreen APIs that are still in''progress''. You could try these two links to see if that helps you
#[http://www.sitepoint.com/html5-full-screen-api/ HTML5 Full screen API]
#[https://wiki.mozilla.org/Gecko:FullScreenAPI Mozilla support for fullscreen]
#[http://www.sagarganatra.com/2012/05/using-html5s-fullscreen-api.html HTML5 fullscreen API]
You could create an event listener for the document.cancelFullScreen() and then see if that helps.
Any specific reason why you want to bind to the button and not to the event?

Similar Messages

  • How can I import photo to computer if my photo were save in event instead of saved photo for ipad1?  Why Photo in event are not detected ?

    How can I import photo to computer if my photo were save in event instead of saved photo for ipad? Photo in event are not detected.

    Importing Personal Photos and videos from your iOS device to your computer.
    http://support.apple.com/kb/HT4083
     Cheers, Tom

  • Itunes is not detecting that my used ipad is in recovery mode

    itunes is not detecting that my used ipad is in recovery mode. Pc is detecting a device but no prompts from itunes.

    You have the latest version of iTunes installed on your computer ?
    You could also see if this troubleshooting page helps : http://support.apple.com/kb/TS1538

  • Muse will not open any drop down menus while in design mode.Screen just flickers.

    I downloaded the new update and while in design mode in muse in one of my pages I cannot access any drop down menus like for example choosing fonts hyperlinks ect.I cannot do any of it I uninstalled and re-installed 3 times I don't know it this is a graphics issue or not how can fix this?

    Are you using Windows 8 or 8.1 ?
    The Muse 2014 release is incompatible with 125% Display scaling via the Windows Control Panel in Windows 8 and 8.1. The only workaround is to switch to 100% or 150% Display scaling.
    Thanks,
    Sanjit

  • ITunes 10.2.2.12 will not detect my iPhone 3GS in Recovery or DFU mode

    It started a couple weeks ago when I tried to upgrade from 4.2.1 to 4.3.1 when it would get stuck in the preparing iPhone for upgrade.  My computer sees the phone because I can see it connected via USB.  I've uninstalled and reinstalled iTunes and family per Apple's instructions under Troubleshooting iPhone.  If I connect the USB to a Virtual Machine under VMWare Workstation 7 it works no problem and this is how I updated to 4.3.1 and again to 4.3.2.  Now it's annoying and I want to try and resolve it.
    iPhone 3GS
    ASUS G73JW
    Win 7 Pro x64
    iTunes 10.2.2.12

    I'm really at a loss here.  Just had to update to 4.3.3 using a virtual machine.  I've uninstalled everything apple, rebooted, ran ccleaner, rebooted, ran ccleaner again, rebooted, installed latest itunes x64, rebooted, tried to update and got error 1602 again.  Windows sees  the iphone in restore mode, tinyumbrella sees the iphone in restore mode and will exit restore mode for me.  I also updated to the latest version of vmware workstation 7.  I would really like to avoid formatting and reinstlling win 7.

  • My voice is not transmitting to the other person while using speaker mode during a call in iphone 6 plus

    I bought iPhone 6 plus last week, which came with ios 8.1 pre-installed, now when I call, my voice is not reaching/transmitting to other person on the call while talking on speaker mode but as soon as I turn off speaker mode my voice reaches to that person.
    Another problem i

    Hi kshitij 2589,
    Thanks for visiting Apple Support Communities.
    It sounds like you can't be heard on calls when using speakerphone. I know it can be frustrating to encounter unexpected issues with a new device.
    I'd recommend going through these tips first, to see if they have an impact on the behavior you're seeing:
    Test the microphone
    To find out if there is an issue with the microphone itself—and not the app you're using or your cellular connection—test the microphone with the built-in Voice Memos app. Speak into the microphone and then play back the recording. You should be able to hear your voice clearly.
    Follow these steps, testing after each with Voice Memos.
    Unplug anything plugged into the headset jack.
    If you're on a call and holding your phone next to your ear, speak into the microphone and make sure you don't block it with your fingers or shoulder.
    If you're using a screen protector or case that covers the microphone, remove it. Clear any debris from the microphones.
    Restart your device.
    Update to the latest version of iOS.
    If you've tried these steps and people still can't hear you well on calls, contact Apple Support.
    You can find the steps above in this Apple Support article:
    If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
    All the best,
    Jeremy

  • Gray Screen, HD not showing up on Disk Utility while in Recovery Mode

    After in Recovery Mode and opening Disk Utility, the only thing that shows up in the left panel is, "disk0" and "Mac OS X Base System".
    Macbook A1278
    Latest version of OS X Mavericks

    Yes.  Look at these iFixit instruction links:
    https://www.ifixit.com/Device/MacBook_Pro_13%22
    http://https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Late+2011+Hard+D rive+Replacement/7656
    You will need a #00 Phillips and a #6 Torx drivers.
    Ciao.
    (select the instructions for your exact MBP)

  • RIGHT_MOUSE_UP event not detected

    Hi,
    I have an adobe creative cloud account.
    My flashgame does not detect the RIGHT_MOUSE_UP  event when test-published in FLASH Professional CC or FLASH CS6.
    The same code however does work with the flash player in my browser and when I publish the SWF and start it outside of the Development Enviroment.
    All versions should be 11.7 as far as I can tell.
    Does anybody know whats going on?
    Thanks in advance

    Thank you very much for you're awnser.
    I'm not absolutely sure I understand you though.
    I have no difficulty publishing directly to the browser.
    When I publish directly to the Browser everything works fine, it is just in the test Enviroment in which the RIGHT_MOUSE_UP event is not detected.
    It detects the RIGHT_MOUSE_DOWN event without problems.
    Publishing and then executing from windows also works fine, it is just when the IDE test-publishes that the problem occurs-.
    My main reason for not publishing to the browser is because I can no longer see the Output of the "trace" commands, which I require for debugging.
    I have tried changing the flash version for which my IDE publishes, but regardless of which version I choose the problem persists.
    Im not absolutely certain what you mean by "the flash ide /"captures/" that right-click when testing".
    Is there anyway to prevent this?
    Or is there at least a way with which I could see the Output of my "trace" commands when publishing to the browser?
    Thank you very much for you're helpfull advice, I tried contacting adobe but all they told me was "sorry we don't offer support for that kind of problem".

  • Error:Account type D is not defined for document type RE

    Hi! I encountered this error msg: "Account type D is not defined for document type RE"  while posting IR in mir6.  What does this error msg mean? Thanks!

    hi,
    RE stands for Gross postings...
    When you block the document for payments...its never possible to the post the payments for such documents...
    The invoice seems to get posted, but is internally blocked for payment and later you need to delete the payment block indicator and process the invoice further for payments...
    check OMBA as well for the settings...
    Regards
    Priyanka.P

  • OAF personalization: Could not export any Document Error

    Hello,
    I am trying to export my personalization from test to prod but i get the below errors when i export the files from test
    After i select the files and click the "Export to File System" button i get the below error...
    Documents Exported.
    Could not export any Document.
    Error while exporting following files:
    /oracle/apps/irc/candidateSearch/webui/customizations/site/0/CmAplSrchQueryRN
    /oracle/apps/irc/candidateSearch/webui/customizations/site/0/CmCandSrchCritDumRN
    /oracle/apps/irc/candidateSearch/webui/customizations/function/IRC_CM_APL_SEARCH_PAGE/CmAplSrchQueryRN
    /oracle/apps/irc/candidateSearch/webui/customizations/function/IRC_CM_PERSON_SEARCH/CmPersonSrchQueryRN
    /oracle/apps/irc/candidateSearch/webui/customizations/site/0/CmPersonSrchQueryRN
    /oracle/apps/irc/candidateSearch/webui/customizations/function/IRC_CM_CANDIDATE_SEARCH/CmCandSrchCritDumRN
    any ideas why ??
    thanks

    Hi Kali!
    I am having the same issue but have confirmed that the profile value for FND: Personalization Document Root Path is the same in both TST and PROD enviroments.
    Still getting the error "Could not export any Document"
    I've done a successful export/import from DEV into TST using the same root path.
    Any ideas?

  • Laptop does not detect the new HDD

    Good afternoon ladies and gentlemen Gameday! I need help.
    On my laptop broke down the hard drive. According to reports, a lot of bad sectors, SMART. Decided to put a new HDD. Laptop does not see the new hard drive. In the BOOT MENU new hard drive is not detected.
    Old hard drive while still runs in the BOOT menu displays all 3 sections. On the new disk interface is similar to the interface connection on the old disk.
    laptop model: 15-e 051 sr.
    OS: Win 8
    manufacturer of the old hard drive : Hitachi
    new hard drive: seagate.
    New hard drive on another system checked for operability.
    Also, the laptop refused to work with other hard drives: Samsung, Hitachi.
    I am sorry for your Books English. For transfers using Google translator.
    I look forward to qualified support, despite the language barrier.
    Sincerely Sqwosh.

    Hi @sqwosh ,
    Thank you for your query, I will do my utmost to assist you.
    First I would like to let you know that the broken English is not a problem.  I understand that Google translation can be a a little rough in the translations.  We  will work together and I am  sure we will do fine!
    I grasp that you are trying to replace the hard drive but it is not being recognized in the bios.
    Here is a link to the HP Pavilion 15 Notebook PC Maintenance and Service Guide. please note page 57 for a list of supported hard drives.  It will also provide information on removal and replacement of the hard drive.
    You could also try this.
    Once you have the hard installed and connected and you are at the bios screen, you will notice an option to restore defaults along the bottom. ( I believe it is F5) .  This will cause it to scan for the hardware and hopefully find your new hard drive.
    Please do not hesitate to respond if you require further assistance and good luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • GT60-0NC SSD not detect in AHCI mode using sata3 port

    GT60-0NC not detect my SSD in sata3 port using AHCI mode. 
    Using Kingston SSDnow V 300 120Gb
    Test ok when setting to IDE mode or RAID mode.
    Anyone know to resolve this problem.

    resolved after changing to Plextor M5S SSD

  • FM2-A75ma-p33 does not detect HDD's

    The board will not detect the HDD's. There are two of them. They are connected SATA. They are detected by my other PC. I have switched out the power supply unit already. The BIOS will not detect them. I have tried using IDE mode (which wasn't really needed since I am going to be installed Windows 7, but I figured it couldn't hurt). Still did not work.
    I cannot update the BIOS through the ZIP or EXE as there isn't an OS on that computer yet. I need the BIOS file in order to do it. How do I get the BIOS file so I can update the BIOS from the utilities in the BIOS?
     Any suggestions?

    Quote
    I cannot update the BIOS through the ZIP or EXE as there isn't an OS on that computer yet.
    You don't need an OS. The .exe can be flashed in dos too. Create a boot stick (https://forum-en.msi.com/index.php?topic=165175.msg1209899#msg1209899) and start the .exe from there.

  • Sharepoint 2013 document library incoming email without attachment not firing event and not getting email

    sharepoint document library incoming email without attachment not firing event and not getting email
    If email contains attachment it works. Is there any setting in document library that will allow emails and eventhandler to fire with out attachment?
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

    What is the purpose of email sent to document library if no attachment. What document library will do what that email if it cant find attachment to save and create a spdoc object. If you want to store email/communication body then opt for site mailbox
    app.
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Not detecting mouse exit events

    I'm developing a Java application that implements an 'auto-hide' functionality - similar to that of the Office Shortcut bar - such that when the mouse moves outside of the application frame the window auto-hides. I'm using the Mouse Exit event to detect when the mouse moves outside of the the application frame and then I 'hide' the window (or rather resize it to 2 pixels high) so I can then detect the Mouse Entered event to restore the window.
    This works OK but occasionally if I move the mouse quick enough the exited event isn't detected and the window doesn't always hide.
    Are there any other ways of detecting if the mouse moves outside of the application frame (so I can also trigger my 'hide' function) without relying on other events such as windowLostFocus.
    Thanks,
    Richard.

    I have one suggestion:
    Check that the component that you use to monitor mouse exit and enter events has at least one pixel visible from all sides (most layout managers allow a border (not a Border class or subclass) that is not occupied by child subcomponent).
    For example if you will place some other component in container directly so some side then mouse enter and exit events will be fired on that component and not on the container.

Maybe you are looking for

  • I forgot my passcode and want to reset my ipod. However it is not showing up in itunes

    My ipod touch has a passcode on it and I can not reset it. It also does not show up in itunes. I have followed all directions on how to reset itunes, ipod, and my computer. I still can not get past my passcode. Is there anything else that I can try t

  • Truoble with aggregation based on levels

    hi people! my question is regarding using pre-aggregate values (for monthes) on different dimension levels. I have fact table ProductFacts that is joined on BMM with PeriodsDim (hierarchy) and GeographyDim (hierarchy). I have 2 logical sources for Pr

  • Upgrading standard XI contents with customised mappings

    Hi I've successfuliy done the integration of IS-RETAIL , POSDM. and SAP POS with XI Standard XI contents are used for this integration. I've customised the standard XI contents as per our Client requirement. Now i want to upgrade the standard XI cont

  • FileDialog in Applet throwing security exception.

    I am trying to create a simple applet that a user can select a file from and then upload that file to a server somewhere. I am able to accomplish this using the JApplet class and the JFileChooser class. Everything works fine with the signed applet. H

  • Flickering green dots... What's the final answer?

    Hi, I jgot in my 30" monitor 2 weeks ago, but ..waited to find on ebay an AGP video card. Spent far more than I should have to get it, and now have flickering green dots everywhere! The screen is perfect when directly connected to the monitor. When I