Exchange 2010 Rejected emails

All,
I am trying to find a way to get more detail when an email is rejected by SCL.  We have a client that out of 100 emails 2 got rejected and I am looking to find out why.   I can submit the error, but it just says that SCL got tripped and Exchange
dropped the email.
I have read another post that the SMTP receive log files on the transport connector would provide more detail, but if I turn this one is there any negative side affects other then a log file?
If anyone has an idea much thanks.

Hi Mays
First you can check by analyzing thorough message headers and see the reason why the emails are rejected
You can enable pipeline tracing for the emails which are getting rejected  and check if the emails are getting stripped
Get-TransportServer | Set-TransportServer -PipelineTracingEnabled $True -PipelineTracingPath "C:\Pipeline Tracing Logs" -PipelineTracingSenderAddress
[email protected] -ContentConversionTracingEnabled $True
There is no harm in enabling the verbose logs on the receive & send connector until there are more transactions happening per day and you run out of disk space . Ensure the drive which holds the protocol log path have enough space if your environment
is big and have huge mail transactions happening in a day
for more info on scl refer below
msdn.microsoft.com/en-us/library/aa579855.aspx 

Similar Messages

  • Outlook 2010 - "Reply To" linking to wrong Exchange 2010 Internal Email Address

    Hi,
    One of my internal email users (Exchange 2010 Enterprise) compiled an email from within Outlook 2010 and sent it to a specific internal colleague with a CC to two other internal colleagues plus two external contacts.
    They all recieve the email successfully but if any of them (internal & external contacts) try to "Reply" or "Reply All" the "To" for the new email is automatically populated with a completely different and unrelated
    internal email account instead of that of the original sender? This occurs when attempted from either thier Outlook or OWA environments.
    This appears to be a one off issue, as the original recipient of the problem email has recieved other emails from the same sender both just before and soon after which all behave correctly.
    I have looked at the View Source information for the recieved and confused email from Outlooks perspective and there is no reference within the source to the wrong account that get consistantly used for the
    purposes of a Reply.
    I have never experienced this sort of problem before since administering Exhange etc and would like to understand how it can randonly occur.
    Any help would be most welcome.
    Regards,
    Mark

    Hi,
    Does this issue happen to other emails or just the certain one?
    On the sender side, please go to Send Items folder, find and open the problematic message. Click on File > Properties and check if the user set “Have replies sent to” in the Delivery options section:
    If the original email was set with this option, when we click Reply, it will send email to the people typed in the box.
    We can also check the message properties on the recipient side.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support

  • Q10, Exchange 2010 ActiveSync - Email will not be deleted on server

    Hey Everyone,
    If you have a Q10 with Exchange ActiveSync, can you remove emails on the server using "Delete from Hub and server" option??
    I am testing this function both with an ipad and Q10. Emails removed from Ipad are removed from Exchange Server whereas emails removed from Q10 with "Delete from Hub and server" option selected are only removed from Q10 but not on the server.
    Is this a broken functionality or are there incorrect settings on the phone?
    Any help is greatly appreciated!
    -T

    the deletes can take a few on my Z30 or Z10
    I know a quick delete would be prefered but maybe the OS deems them as not fast needed
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Exchange 2010 inbound email (external/internal) randomly stuck in delivery queue

    Dear all,
    We got a problem email is not deliver to mailbox normal.
    For example. I send a email to recipient A,B and C in same internal email.
    The result is A can receive email normally, but B and C email is stuck in delivery queue.
    We need to re-start the CAS transport service to release the email from delivery queue.
    Any idea for this kind of email deliver issue?
    Exchange server environment:
    1. Two CAS/HT server in NLB mode (Exchange std. ver.)
    2 Two Mailbox server in DAG mode (Exchange Ent. ver.)
    We got this issue around 12 months on production migrate from 2000 to 2007 to 2010.
    Felix.

    hi,
    What's the last error in the queue viewer? Do you have some error code?
    You can use message tracking log to find more information about your issue.
    If you create 3 new users and send a test mail to they, can they always receive the mail. May be your user account have some problem.
    we need more information about your issue. Always is the stationary users or it is randomly?,The frequency of occurrence and so on.
    hope can help you
    thanks,
    CastinLu
    TechNet Community Support

  • Exchange 2010 Internal Email Delayed for 5 Months

    Today I got an email from a user saying she just received an internal email that was sent November 5th 2013. I tried using Exchange Tracking Log Explorer but nothing shows as being received on 11/5/13 and nothing from todays date that matches the Subject.
    Here are is the msg header which has been modified to hide our domain. This is a small business with 12 users with SBS 2011. This isn't the first time this has happened either. Another user had email delayed for 3 months.
    Received: from work-SERVER2.work.local ([fe90::504b:b597:b89b:e7d9]) by
    work-SERVER2.work.local ([fe90::504b:b597:b89b:e7d9%10]) with mapi id
    14.01.0438.000; Tue, 5 Nov 2013 08:38:41 -0900
    Content-Type: application/ms-tnef; name="winmail.dat"
    Content-Transfer-Encoding: binary
    From: USER NAME <[email protected]>
    To: USERS <[email protected]>
    Subject: FW: INVOICE FROM ABC
    Thread-Topic: INVOICE FROM ABC
    Thread-Index: Ac7Z2hVrwb+u2RXnRA+qtd9tX4v5DAAc7eQA
    Date: Tue, 5 Nov 2013 08:38:40 -0900
    Message-ID: <[email protected]>
    References: <009f01ced9da$2f37ff60$8da7fe20$@com>
    In-Reply-To: <009f01ced9da$2f37ff60$8da7fe20$@com>
    Accept-Language: en-US
    Content-Language: en-US
    X-MS-Has-Attach: yes
    X-MS-Exchange-Organization-SCL: -1
    X-MS-TNEF-Correlator: <[email protected]>
    MIME-Version: 1.0
    X-MS-Exchange-Organization-AuthSource: work-SERVER2.work.local
    X-MS-Exchange-Organization-AuthAs: Internal
    X-MS-Exchange-Organization-AuthMechanism: 04
    X-Originating-IP: [192.168.99.99]

    Hi
    First i really doubt that you would be able to see those transactions in message tracking logs since the default setting is 30 days.
    By default the message tracking log is set to 30 days, you can change that setting though through the Shell:
    http://technet.microsoft.com/en-us/library/aa997984.aspx
    If this is the case then you can better increase the tracking logs retention for 3 months for the next delay can be recorded.
    Also try to see if you could see some information on the protocol logs as well.
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you. Regards, Sathish

  • Outlook 2010/2007 with Exchange 2010 - show email address in field To: instead name

    Hi,
    I´ve SBS 2011. Some users have more email aliases. I want to see in Outlook email adress/alias in field To: <- no user Name and Surname. I know, that I can open every message and go to Options and see full header, where is email adress, but I want
    to see it on message preview in Outlook window (or Name Surname ([email protected]))
    Thank you very much for your responses.

    I think this is not what he was looking for. The link you provided is for showing the senders smtp address and not the recipients. as i understand it, hes looking for the same that i do.
    user has multiple smtp addresses and user wants to be able to see to which of his own addresses the mails has been sent.
    im looking for that solution to show recipients smtp address in the To:-Field when showing the email
    as i unterstand it, there could not be a registry-value for outlook because exchange isnt using the smtp address internaly to deliver the email.
    the only "Simple" Solution/Workaround i found is to use a distribution group with the smtp address you want to see and only add the specific user. then the user is able to see the Name of the Distribution Group instead of his own name so
    hes able to differ.
    thanks

  • Exchange 2010 route email to SAP smtp server

    Hi,
    we have a Exchange2010 infrastructure, i need to route email received to a specific address: [email protected], to a SAP smtp server: serverip:25000
    How can i obtain this?
    Thanks in advance

    Hi,
    Please review note 455140.
    Settings on the mail server (SAP-external configuration)
    To be able to receive mails in the SAP system, you need to set your mail server so that certain mail addresses are forwarded to one or several SAP systems or clients. For this purpose, you need to define routing rules that assign a mail host and/or port to address areas (generic address parts, usually the domain), for example:
           *@crm-prod.company.com  -->  SAPWASHost:25000
           *@crm-test.company.com  -->  SAPWASHost:25001
    For more information about the exact setting procedure, see the mail server documentation.
    Thank you.
    Best regards,
    Ciarán

  • Updating exchange 2010 accounts after provisioning

    Hi Guys,
    I am looking for the information on modifying exchange 2010 accounts information once we provisioined an exchange 2010 account.
    For example, renaming the mailbox in exchange2010 when there is a change in the lastname like that. All of the "UPDATED" tasks
    were given as "Required for completion". So, did not understand how the "UPDATED" tasks will work.
    Will exchange 2010 support email attribute as multi-valued?
    And how the move mailbox will work? Please provide some information.
    Thanks for your help.

    In exchange connector, all of the UPDATED tasks were given as required for completion. I believe required for completion will needed only for create user task not for all of the updated tasks.It depends on the requirement. Generally we make these task as Required for Completion only.
    If I want to update exchange 2010 mailbox, I just need to update mail atribute in AD. Is that correct?Right now, I am not sure which attribute we have to modify for renaming mailbox and whether it is supported with OOTB connector or not.
    If not then you need to extend the connector functionality but I have seen couple of threads on Google which talks about Renaming Mailbox in Exchange.
    And
    So, did not understand how the "UPDATED" tasks will work.SO I have given you link that how OIM triggers UPDATED task in any Process Defn.
    Required for Completion means: Whether task should be completed for completing the process/operation or not. It is nothing to do with UPDATED Task trigger.

  • Exchange 2010 Send Connector to postfix (v. 2.11) smarthost uses STARTTLS and cannot connect

    Dear all,
    I am having problems with exchange 2010 sending emails through a postfix smarthost server which disconnects the sessions. I also use a sendmail as a smarthost
    server which is working just fine but I have to switch to postfix and cannot do this as long as the encryption does not work.
    Here is the log file of the postfix server:
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: initializing the server-side TLS engine
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: connect from server1.mydomain.com[192.168.20.10]
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: setting up TLS connection from server1.mydomain.com[192.168.20.10]
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: server1.mydomain.com[192.168.20.10]: TLS cipher list "aNULL:-aNULL:ALL:+RC4:@STRENGTH"
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:before/accept initialization
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAB1B0] (11 bytes => -1 (0xFFFFFFFFFFFFFFFF))
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAB1B0] (11 bytes => 11 (0xB))
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0000 16 03 01 00 5a 01 00 00|56 03 01                 ....Z... V..
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAB1BE] (84 bytes => 84 (0x54))
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0000 54 a9 3d b9 0d 5e 8b 64|7c 6b b5 21 f2 93 e7 84  T.=..^.d |k.!....
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0010 17 ea 33 d7 e5 13 f2 75|3a 87 38 32 01 85 82 5b  ..3....u :.82...[
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0020 00 00 18 00 2f 00 35 00|05 00 0a c0 13 c0 14 c0  ..../.5. ........
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0030 09 c0 0a 00 32 00 38 00|13 00 04 01 00 00 15 ff  ....2.8. ........
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0040 01 00 01 00 00 0a 00 06|00 04 00 17 00 18 00 0b  ........ ........
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0050 00 02 01                                         ...
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0053 - <SPACES/NULLS>
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 read client hello A
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write server hello A
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write certificate A
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write key exchange A
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 write server done A
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: write to 7F4823FA5210 [7F4823FB8B70] (1911 bytes => 1911 (0x777))
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: 0774 - <SPACES/NULLS>
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:SSLv3 flush data
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: read from 7F4823FA5210 [7F4823FAC803] (5 bytes => 0 (0x0))
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept:failed in SSLv3 read client certificate A
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: SSL_accept error from server1.mydomain.com[192.168.20.10]: lost connection
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: lost connection after STARTTLS from server1.mydomain.com[192.168.20.10]
    Jan  4 14:18:59 server7 postfix/smtpd[1659]: disconnect from server1.mydomain.com[192.168.20.10]
    I
    have read in the post at https://social.technet.microsoft.com/Forums/exchange/en-US/6db38364-cb08-45c0-b159-3ddf30ef0b3e/exchange-2010-send-connector-uses-ssltls-and-cannot-connect-to-smarthost-how-to-deactivate-ssl?forum=exchange2010
    how to deactivate the SSL encryption, but this is of course a security flaw, if I am not mistaken. I would like to encrypt the connection between the servers for obvious security
    reasons but I have come to a standstill...
    My Exchange server certificate is configured
    as follows:
    AccessRules        : {System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKeyAcc
                         ule, System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKe
                         essRule}
    CertificateDomains : {server1, server1.solid-con.com}
    HasPrivateKey      : True
    IsSelfSigned       : True
    Issuer             : CN=server1
    NotAfter           : 22/01/2017 13:18:02
    NotBefore          : 22/01/2012 13:18:02
    PublicKeySize      : 2048
    RootCAType         : None
    SerialNumber       : 6925D91285B649BD4D5E4297F1A48471
    Services           : IMAP, POP, IIS, SMTP
    Status             : Valid
    Subject            : CN=server1
    Thumbprint         : 939A37173BF84E352CEDC74F7D9A3D71F498A005
    AccessRules        : {System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKeyAcc
                         ule, System.Security.AccessControl.CryptoKeyAccessRule}
    CertificateDomains : {WMSvc-SERVER1}
    HasPrivateKey      : True
    IsSelfSigned       : True
    Issuer             : CN=WMSvc-SERVER1
    NotAfter           : 19/01/2022 12:56:44
    NotBefore          : 22/01/2012 12:56:44
    PublicKeySize      : 2048
    RootCAType         : Registry
    SerialNumber       : 1DB8711F7ADC5CB54196468EF2FF5D21
    Services           : None
    Status             : Valid
    Subject            : CN=WMSvc-SERVER1
    Thumbprint         : 191D86BDE274510453D58DDB91D253DABBCF05F1
    And My Default Send Connector is configured as follows:
    AddressSpaces                : {SMTP:*;1}
    AuthenticationCredential     : System.Management.Automation.PSCredential
    Comment                      :
    ConnectedDomains             : {}
    ConnectionInactivityTimeOut  : 00:10:00
    DNSRoutingEnabled            : False
    DomainSecureEnabled          : False
    Enabled                      : True
    ErrorPolicies                : Default
    ForceHELO                    : False
    Fqdn                         :
    HomeMTA                      : Microsoft MTA
    HomeMtaServerId              : SERVER1
    Identity                     : Internet
    IgnoreSTARTTLS               : False
    IsScopedConnector            : False
    IsSmtpConnector              : True
    LinkedReceiveConnector       :
    MaxMessageSize               : unlimited
    Name                         : Internet
    Port                         : 25
    ProtocolLoggingLevel         : None
    RequireOorg                  : False
    RequireTLS                   : False
    SmartHostAuthMechanism       : None
    SmartHosts                   : {server7.mydomain.com, server6.mydomain.com}
    SmartHostsString             : server7.mydomain.com,server6.mydomain.com
    SmtpMaxMessagesPerConnection : 20
    SourceIPAddress              : 0.0.0.0
    SourceRoutingGroup           : Exchange Routing Group (DWBGZMFD01QNBJR)
    SourceTransportServers       : {SERVER1}
    TlsAuthLevel                 :
    TlsDomain                    :
    UseExternalDNSServersEnabled : False
    Any help would be greatly appreciated as I am
    stuck...
    Luca

    Hi Allen,
    Thank you very much for your reply.
    The Postfix TLS Manager is enabled in master.cf
    tlsmgr    unix  -       -       n       1000?   1       tlsmgr
    and running
    server7:/etc/postfix # ps -efa|grep tls
    postfix  11967 11863  0 11:21 ?        00:00:00
    tlsmgr -l -t unix -u
    Every other (Linux/UNIX) server has no problem e.g.:
    Jan  5 11:28:36 server7 postfix/smtpd[12215]: connect from server2.mydomain.com[192.168.20.20]
    Jan  5 11:28:36 server7 postfix/smtpd[12215]: Anonymous TLS connection established from server2.mydomain.com[192.168.20.20]: TLSv1 with cipher DHE-DSS-AES256-SHA (256/256 bits)
    Jan  5 11:28:36 server7 postfix/smtpd[12215]: B5502946AB0: client=server2.mydomain.com[192.168.20.20]
    Jan  5 11:28:36 server7 postfix/cleanup[12221]: B5502946AB0: message-id=<[email protected]>
    Jan  5 11:28:36 server7 postfix/qmgr[12200]: B5502946AB0: from=<[email protected]>, size=1026, nrcpt=1 (queue active)
    Jan  5 11:28:36 server7 postfix/smtpd[12215]: disconnect from server2.mydomain.com[192.168.20.20]
    Jan  5 11:28:37 server7 postfix/smtpd[12225]: connect from localhost[127.0.0.1]
    Jan  5 11:28:37 server7 postfix/smtpd[12225]: 4076A946AB1: client=localhost[127.0.0.1]
    Jan  5 11:28:37 server7 postfix/cleanup[12221]: 4076A946AB1: message-id=<[email protected]>
    Jan  5 11:28:37 server7 postfix/qmgr[12200]: 4076A946AB1: from=<[email protected]>, size=1778, nrcpt=1 (queue active)
    Jan  5 11:28:37 server7 postfix/smtpd[12225]: disconnect from localhost[127.0.0.1]
    Jan  5 11:28:37 server7 postfix/smtp[12222]: B5502946AB0: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.54, delays=0.05/0.01/0.01/0.47, dsn=2.0.0, status=sent
    (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 4076A946AB1)
    Jan  5 11:28:37 server7 postfix/qmgr[12200]: B5502946AB0: removed
    Jan  5 11:28:37 server7 postfix/cleanup[12221]: 4401F946AB0: message-id=<[email protected]>
    Jan  5 11:28:37 server7 postfix/qmgr[12200]: 4401F946AB0: from=<[email protected]>, size=1920, nrcpt=1 (queue active)
    Jan  5 11:28:37 server7 postfix/local[12226]: 4076A946AB1: to=<[email protected]>, relay=local, delay=0.02, delays=0/0.01/0/0, dsn=2.0.0, status=sent (forwarded as 4401F946AB0)
    Jan  5 11:28:37 server7 postfix/qmgr[12200]: 4076A946AB1: removed
    Jan  5 11:28:37 server7 postfix/smtp[12227]: Untrusted TLS connection established to 192.168.20.10[192.168.20.10]:25: TLSv1 with cipher AES128-SHA (128/128 bits)
    Jan  5 11:28:37 server7 postfix/smtp[12227]: 4401F946AB0: to=<[email protected]>, orig_to=<[email protected]>, relay=192.168.20.10[192.168.20.10]:25,
    delay=0.29, delays=0/0.01/0.02/0.25, dsn=2.6.0, status=sent (250 2.6.0 <[email protected]> [InternalId=619] Queued
    mail for delivery)
    Jan  5 11:28:37 server7 postfix/qmgr[12200]: 4401F946AB0: removed
    and if you take a look at the lines in bold you will see that mails can be delivered over TLS to that very Exchange server (the mailboxes are on that server)...
    To summarise:
    exchange --> postfix with TLS = session disconnected (and everything seems to be initiated by the exchange server -if I read the logs correctly)
    postfix --> exchange with TLS = works
    any further hints?
    Thank you very much in advance,
    Luca

  • Macbook Pro 10.7 Outlook 2011 Exchange 2010 sync

    Macbook Pro 10.7 Outlook 2011 Exchange 2010 sync
    Asked by: tppltd
    I have a customer that uses our hosted solution Server 2008 Exchange 2010 for email access and web dav file share. They have 8 Macbooks connected to the system and they all use Outlook 2011. One user has an issue where he's reading and deleting emails within Outlook on his mac but it isnt updating Exchange which in turn means his iphone isnt clearing down the read and deleted emails. If i log on to the owa mailbox i can see that the emails havent been read or deleted. We have this issue for one user with the newest MacBook. It first occurred 4 months ago and i ended up removing the account and resyncing the whole lot which took a few hours due to the size of the mailbox.  I've right clicked the folders and told it to resync but it remains the same. Does anyone have any help they can provide please? thanks
    The user doesnt want to rebuild the outlook account.  Am i missing somthing obvious

    I suggest you post your question on Microsoft's own forums for their Mac software as it's their stuff you have questions about:
    http://answers.microsoft.com/en-us/mac

  • Exchange 2010 can't send or receive email with attachments.

    Hello,
    We have an Exchange 2010 server, running under Windows 2008R2. Both the server and Exchange are current for Windows and Exchange updates. Exchange is on SP3 installed about a month ago with no errors reported in the event logs.
    The problem is that attachments over about 1 MB do not send or receive and no error message is returned. If I send an email message with a 3 MB attachment to myself, it reports as sent in Outlook. On the Exchange server the message queue shows nothing in
    the queue. I try to use Exchange mail flow tracking tool and it hangs when selecting “messages received from” option. I gave up waiting after 5 minutes for the display to populate.
    As the server is set attachments should be able to send and receive up to 20 MB.
    I checked and verified all settings I could find related to this. I checked with the Exchange Management Console per the following article:
    http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/managing-limits-exchange-server-2010-part1.html
    I also checked using the Exchange Power Shell using the following article:
    http://eightwone.com/2010/09/29/exchange-message-size-limits/
    Both show that all settings are suitable. Details are below
    I would appreciate feedback on this problem.
    Thank you!
    Details from the articles noted above:
    First test was to attach a 3 mb text file in Outlook sent from my in house account to my in house account. After 5 minutes the test message was not received nor was there an error message returned.
    Checked The Exchange server mail queue and there was nothing in the queue. Checked the Exchange mail flow tracking tool and it hung when selecting “messages received from” option.
    Reviewed and verified settings per the following 2 articles:
    Article #1
    http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/managing-limits-exchange-server-2010-part1.html
    Organization Configuration>Hub Transport>General Settings>Global Settings>Transport Settings set to max receive size (KB) = 20480
    Settings set to max send size (KB) = 20480
    Organization Configuration> Hub Transport> Send Connectors tab.
    Maximum message size (KB) set to 20480
    Exchange Management Console> Server Configuration> Hub Transport> and then on the right side, select the desired server.
    A list of all Receive Connectors will be shown below
    There are 3 receive Connectors
    #1) named Client XXXXXXXXXX
    Maximum message size (KB) set to 20480
    #2) named Default  XXXXXXXXXX
    Maximum message size (KB) set to 20480
    #3) named relay
    Maximum message size (KB) set to 20480
    Use Exchange Management Shell to check settings
    #1) Get-ADSite
    Returns:
    Name                           HubSiteEnabled
    Default-First-Site-Name        False
    #2) Get-ADSiteLink
    Name                      ADCost     ExchangeCost    Sites
    DEFAULTIPSITELINK         100                        {xxxx.local/Configuration/Si...
    #3) Get-ADSiteLink | select Max*
    MaxMessageSize
    unlimited
    Exchange Management Console>Expand Organization Configuration>Click on Hub Transport item>Click on Transport Rules tab
    No rules
    Article #2 
    http://eightwone.com/2010/09/29/exchange-message-size-limits/
    COMMAND: Get –TransportConfig
    results:
    ClearCategories                     : True
    ConvertDisclaimerWrapperToEml       : False
    DSNConversionMode                   : UseExchangeDSNs
    ExternalDelayDsnEnabled             : True
    ExternalDsnDefaultLanguage          :
    ExternalDsnLanguageDetectionEnabled : True
    ExternalDsnMaxMessageAttachSize     : 10 MB (10,485,760 bytes)
    ExternalDsnReportingAuthority       :
    ExternalDsnSendHtml                 : True
    ExternalPostmasterAddress           :
    GenerateCopyOfDSNFor                : {}
    HygieneSuite                        : Standard
    InternalDelayDsnEnabled             : True
    InternalDsnDefaultLanguage          :
    InternalDsnLanguageDetectionEnabled : True
    InternalDsnMaxMessageAttachSize     : 10 MB (10,485,760 bytes)
    InternalDsnReportingAuthority       :
    InternalDsnSendHtml                 : True
    InternalSMTPServers                 : {}
    JournalingReportNdrTo               : <>
    LegacyJournalingMigrationEnabled    : False
    MaxDumpsterSizePerDatabase          : 18 MB (18,874,368 bytes)
    MaxDumpsterTime                     : 7.00:00:00
    MaxReceiveSize                      : 20 MB (20,971,520 bytes)
    MaxRecipientEnvelopeLimit           : 500
    MaxSendSize                         : 20 MB (20,971,520 bytes)
    MigrationEnabled                    : False
    OpenDomainRoutingEnabled            : False
    Rfc2231EncodingEnabled              : False
    ShadowHeartbeatRetryCount           : 12
    ShadowHeartbeatTimeoutInterval      : 00:15:00
    ShadowMessageAutoDiscardInterval    : 2.00:00:00
    ShadowRedundancyEnabled             : True
    SupervisionTags                     : {Reject, Allow}
    TLSReceiveDomainSecureList          : {}
    TLSSendDomainSecureList             : {}
    VerifySecureSubmitEnabled           : False
    VoicemailJournalingEnabled          : True
    HeaderPromotionModeSetting          : NoCreate
    Xexch50Enabled                      : True
    COMMAND: 
    Set-TransportConfig –MaxReceiveSize 20MB –MaxSendSize 20MB
    C:\Windows\system32>Set-TransportConfig -MaxReceiveSize 20MB -MaxSendSize 20MB
    WARNING: The command completed successfully but no settings of 'Transport Settings' have been modified.
    COMMAND: 
    Get-SendConnector
    Identity                                AddressSpaces                         
     Enabled
    Internet                                {SMTP:*;1}                             
    True
    COMMAND: 
    Set-SendConnector -Identity Internet -MaxMessageSize 20MB
    WARNING: The command completed successfully but no settings of 'Internet' have been modified.
    COMMAND: 
    Get-ReceiveConnector
    Identity                                Bindings                                Enabled
    XXXXXXXXXX\Default XXXXXXXXXX           {0.0.0.0:25}                           
    True
    XXXXXXXXXX \Client XXXXXXXXXX     {:::587, 0.0.0.0:587}                   True
    XXXXXXXXXX \relay                        {0.0.0.0:25}                           
    True
    COMMAND: 
    Get-ReceiveConnector | fl Identity,MaxMessageSize
    Identity       : XXXXXXXXXX \Default XXXXXXXXXX
    MaxMessageSize : 20 MB (20,971,520 bytes)
    Identity       : XXXXXXXXXX \Client XXXXXXXXXX
    MaxMessageSize : 20 MB (20,971,520 bytes)
    Identity       : XXXXXXXXXX \relay
    MaxMessageSize : 20 MB (20,971,520 bytes)
    COMMAND: 
    Get-AdSiteLink | fl Name,*max*
    Name           : DEFAULTIPSITELINK
    MaxMessageSize : unlimited
    COMMAND: 
    Get-RoutingGroupConnector <ConnectorID> | FL Name, *Max*
    No routing group connectors are installed
    Individual
    Recipient Configuration > Mailbox>Properties of the User> Activate tab Mail Flow Settings> Properties>Message Size Restrictions settings:
    Set to 20480 for send and receive for all.
    Re-tested and had the same problem. 
    Post on Technet.

    ExchangeITPro,
    Thank you for your reply.
    >what SP are you at?
    As noted in the first paragraph: "We have an Exchange 2010 server, running under Windows 2008R2. Both
    the server and Exchange are current for Windows and Exchange updates. Exchange is on SP3 installed about a month ago with no errors reported in the event logs."
    >try restarting the transport services.
    Done previously as well as the entire server. No change.

  • Exchange 2010: Sender address rejected: Access denied

    hi friends
    i have been recently experiencing an issue with one of my customer which i send email i get bounce message while i can receive their emails with no issue. i have exchange 2010 installed and im using Anti spam device too. my domain is ok.com
    i try to send from OWA as well but i get the same result.
    Delivery has failed to these recipients or groups:
    [email protected] A problem occurred during the delivery of this
    message to this e-mail address. Try sending this message again. If the problem continues, please contact your helpdesk.
    Diagnostic information for administrators:
    Generating server: antispamServer.ok.com
    [email protected] #< #5.0.0 X-Spam-&-Virus-Firewall; host mail.abc.com[22.22.22.12] said: 554
    5.7.1 <btv1==14869c83b8f==[email protected]: Sender address rejected: Access denied (in reply to RCPT TO command)> #SMTP#
    Original message headers:
    any idea?
    thanks

    hi
    when i disable the antispam device i get this error
    smtp5.relay.iad3a.emailsrvr.com rejected your message to the following e-mail addresses:
    [email protected]
    smtp5.relay.iad3a.emailsrvr.com gave this error: <[email protected]>: Sender address rejected: Access denied
    Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another
    restriction may be preventing delivery.

  • How to force Outlook's Junk email fitler to not filter Exchange 2010 SP1 accepted domains?

    Hello,
    I wonder if there really is no way how to reach the result described in the title question. Because
    http://support.microsoft.com/kb/2458522 says:
    This issue occurs because of a functionality change that is introduced in Exchange Server 2010 SP1. In Exchange Server 2010 SP1, domains that are configured as accepted domains are no longer allowed in the junk email lists of a mailbox.
    So please tell us Microsoft how can we force Outlook to accept internal domain as a trusted senders and not apply Junk email filter on it?
    There was already a long discussion about the steps here
    http://social.technet.microsoft.com/Forums/en-US/outlook/thread/15f857c6-0ed4-4004-9d90-cb5d16361752 so please don't offer anything described there.
    Thank you,

    Trying to deal with the Outlook Junk Email Filter is not very easy and had been a pain in the butt.
    The ONLY way to ensure the Outlook 2010 Junk Email filter honors "white listed" emails is to stamp the email with SCL -1. Setting a transport rule will do that but it is not very flexible. 
    I was able to resolve these issues by simply enabling the Exchange 2010 Anti-Spam agents on each hub transport server. We have no Edge Server but we use a couple of Ironports at the gateway which provide the bulk of AntiSpam. We didn't think we would
    need the Exchange AntiSpam so we hadn't initially enabled. After months of trying to resolve people's complaints of emails from internal system ending up in Junk, this solution worked for us.
    This is the order in which it was done.
    1. We set the receive connectors for the internal systems for bypassing Anti Spam. We basically have 2 receive connectors, one for internal system with no relay, and one for internal systems who are allowed external relay.
    Get-ReceiveConnector "server\name of the recieve connector" | Add-ADPermission -User "“NT Authority\Anonymous Logon”  -AccessRights ExtendedRight
    -ExtendedRights ms-exch-bypass-anti-spam
    Note: If you use SMTP Authentication, Exchange will only mark the emails as "Internal" and not assign a SCL of -1. It can only be on anonymous connections.
    Note: We have a separate receive connector for the Ironports delivering external email that will not bypass Anti-Spam. These emails will receive a SCL rating of 0-9
    2. We set the global SCL to 6 (default is 4). You can set it to whatever you want.
    Set-OrganizationConfig -SCLJunkThreshold 6
    So basically, any email tagged with SCL 7-9 will be moved to Junk by Exchange.
    3. Set-ContentFilterConfig -SCLQuarantineEnabled $False -SCLDeleteEnabled $False -SCLRejectEnabled $False
    We don't want delete, reject or quarantine anything on Exchange. Just move email to Junk folder if SCL 7-9 and have user deal with it.
    4. Set the Internal SMTP Servers by adding each Exchange server's IP Address to the Global Transport Settings. I used EMC, Organization Config, Global Settings, Transport Settings properties, Message Delivery tab. Do NOT add any other "internal" servers
    here, only the Exchange servers.
    5. Then we installed the AS agents on each HT Server.
    Starting with the first server
    Stop MSExchange Transport service
    D:\Program Files\Microsoft\Exchange Server\V14\Scripts>.\install-AntispamAgents.ps1
    After installation, disable all the agents except for Content Filtering Agent. This agent has to be enabled for Exchange to stamp the email with SCL -1. I used EMC, Organization Config, Hub Transport. You will see a new tab called Anti-Spam. Disable everything
    except Content Filtering.
    Start MSExchange Transport service.
    Repeat on each HT server. (You won't have to repeat the disabling of the agents as that is a global setting)
    6. You can add global safe senders by doing the following.
    $list = (Get-ContentFilterConfig).BypassedSenders
    $list
    $list.add("[email protected]")
    $list.add("[email protected]")
    Set-ContentFilterConfig -BypassedSenders $list
    The message headers are stamped with
    For emails sent through the Internal connector
    X-MS-Exchange-Organization-Antispam-Report: MessageSecurityAntispamBypass
    X-MS-Exchange-Organization-SCL: -1
    OR
    For external emails from a safe sender
    X-MS-Exchange-Organization-Antispam-Report: ContentFilterConfigBypassedSender
    X-MS-Exchange-Organization-SCL: -1
    OR
    For all other external emails
    X-MS-Exchange-Organization-SCL: 0
    Good Luck. This has basically stopped all the calls about "legitimate" email in Junk Email folder.

  • Delete emails from a specific folder in Exchange 2010 SP1

    Hi all,
     Since Exchange 2010 SP1 does not have “-DeleteContent” parameter in mailboxexportrequest any more, how do we delete emails from a specific folder of a user mailbox? (Personal folder, not default folders).
    Please note that the ASQ for searchquery in Search-Mailbox does not support “folder”.
    If going for retention policy, is there a way to tag a retention policy to a specific folder of a user mailbox without user attention?
    William Yang
    William Yang

    Hi William,
    Yes, you may not run the Search-Mailbox to delete items in specific folder at the moment. Hope it will be back soon.
    You can create a Personal tag, users can apply personal tags to folders they create. But users have to select related Retention Policy using Outlook or OWA manually.
    For more information, please see:
    Understanding Retention Tags and Retention Policies
    http://technet.microsoft.com/en-us/library/dd297955.aspx
    Frank Wang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]

  • TS3276 i am having trouble with my exchange emails. I use the latest exchange 2010 and am having trouble downloading all my emails on the macbook

    I use a microdost exchange 2010 in my office.  I just bought a macbook pro and try to syn my office mail.  While it has been set up properlly and it has started downloading some of my older emails, it is taking very long and does not download all the mails especially the new ones.  The ones it has downloaded take a long time to load and open.
    I bought the laptop to use it on the go. What is the solution? Please help.
    Thanks.

    Startup your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
    If the startup disk is not available from that window, you may be able to repair the disk.
    Help here >  A flashing question mark appears when you start your Mac

Maybe you are looking for