External access broke after site name change

We have external access to SharePoint 2013 behind a reverse proxy using an ADFS server for authentication. It was working fine until I changed our site name and now externally it gives a 500 error. The event log says there is a problem with AAMs, but this
is a host-named site collection. The default URL for the site is correct. What am I missing here?

Hi Benjamin ,
According to your description, my understanding is that after changed the site collection hosted name of a hose-named site collection you encountered error
500 when you wanted to access the site collection from external.
For your issue, please refer to the blog for renaming site collections in SharePoint 2013:
http://blogs.msdn.com/b/erica/archive/2013/11/26/customer-question-renaming-site-collections-in-sharepoint-2013.aspx
Reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/0d2abd2f-6208-4745-a389-1ada60cca287/change-the-name-of-a-site-collection?forum=sharepointgenerallegacy
http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Similar Messages

How can I configure EM after machine name changed?

Dear all,
How can I configure EM after machine name changed?
Thanks in advance.

You can change it for Management Agents, but you need to re-install OMS if the hostname for the OMS host has changed.

Office 365/Share point one Drive site name change ?

We use Office 365 and the One drive in our organization and ADFS setup to sync users from Active Directory to create and manage users in 365. A problem we've discovered is that when a users name changes (married) I can change it in AD and that will
show in 365 but the users sharepoint site to one drive still shows the original name so for example if jsmith changed to jjones the original sharepoint onedrive site is
https://crdistrict-my.sharepoint.com/personal/jsmith_OURDOMAIN/_layouts/15/start.aspx#/Documents/Forms/All.aspx
and the new one should be
https://crdistrict-my.sharepoint.com/personal/jjones_OURDOMAIN/_layouts/15/start.aspx#/Documents/Forms/All.aspx
I found in the Admin console under sharepoint settings etc places to update the user to the new name and I make the change and hit save and close and in a few min its back to the original. It won't let me change it. Anyone else run across this
Jason

Hi,
I understand that you stay in the Office 365 admin Center, when you click the SharePoint option, you get the error page.
I recommend to enter the URL as below in the Brower to check whether the account can access SharePoint admin Center.
https://sitename /_layouts/15/online/SiteCollections.aspx
Here is a similar thread for
your reference:
http://community.office365.com/en-us/f/148/t/192116.aspx
Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
Office 365 forum
http://community.office365.com/en-us/forums/default.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Connection Errors to Remote Desktop from OSX after Domain name change

We have an issue using Microsoft Remote Desktop from Macs in our school. All was well until we changed the domain name of our RDS servers and installed a new wildcard certificate. Connections work perfectly in Windows 7/8 and also iOS on iPads, but we cannot
get any Macs to connect having tried OSX 10.7 and 10.9. The error message says the connection failed to load but seems to add a spurious end to the connection string - TS/en-US/Default.aspx - but we cannot trace where this is being picked up.
We can get to the site in a web browser and sign in to receive the "browser not supported" message in Safari so traffic is obviously getting to the severs.
Has anyone else had a similar issue? We have spent days poking around with DNS etc but can't seem to make any progress here.

Hi Jeremy,
I have tried removing connections and also re-installing the App. We have been using this App since January with no real issues until we made our domain name change - I really don't understand why it works fine in Windows and iOS but not OSX. We are doing
nothing different to what we have done from day 1.
Log file from our old connection when it was working looked like this:
[2014-Mar-24 10:41:43] RDP (0): Final rdp configuration used: redirectcomports=1
server port=3389
use multimon=1
redirectdrives=1
promptcredentialonce=1
authentication level=0
full address=rdsfarm.xxxxxxx.internal
session bpp=16
prompt for credentials on client=1
redirectprinters=1
drivestoredirect=*
alternate shell=||OpenMind
gatewayusagemethod=2
alternate full address=rdsfarm.xxxxxx.internal
workspace id=rdsgw.xxxxxxx.internal
allow font smoothing=1
redirectposdevices=0
audiocapturemode=1
gatewaycredentialssource=0
remoteapplicationname=OpenMind 2.0
devicestoredirect=*
remoteapplicationmode=1
remoteapplicationprogram=||OpenMind
enablecredsspsupport=1
redirectsmartcards=1
redirectclipboard=1
span monitors=1
gatewayprofileusagemethod=1
gatewayhostname=rds.xxxxxxx.sch.uk
remoteapplicationcmdline=
The log file looks very different now, all I am getting is:
[2014-Jun-17 10:26:41] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Jun-17 10:26:41] RDP (0): lo0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-17 10:26:41] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Jun-17 10:26:41] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Jun-17 10:26:41] RDP (0): gif0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): stf0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en1 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): en1 af=30 (AF_INET6) addr=fe80::21f:5bff:feb8:3f72%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-17 10:26:41] RDP (0): en1 af=2 (AF_INET) addr=192.168.0.65 netmask=255.255.255.0
[2014-Jun-17 10:26:41] RDP (0): fw0 af=18 addr= netmask=
[2014-Jun-17 10:26:41] RDP (0): --- END INTERFACE LIST ---
[2014-Jun-17 10:26:41] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jun-17 10:26:41] RDP (0): client version: 8.0.24875
[2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-17 10:26:41] RDP (0): correlation id: 9f18df13-7c84-dc4b-a780-e6b77a280000
[2014-Jun-17 10:26:41] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-17 10:26:41] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Jun-17 11:44:15] RDP (0): *** Application terminated ***
[2014-Jun-18 09:51:37] RDP (0): *** Application terminated ***
[2014-Jun-19 12:00:19] RDP (0): *** Application terminated ***
[2014-Jun-19 12:15:32] RDP (0): *** Application terminated ***
[2014-Jun-19 12:16:21] RDP (0): *** Application terminated ***

Authentication popups after computer name changed to computer record name

Hi
I'm not sure if anyone else is facing this issue, but I have been unable to find anything in the forums.
I have setup a number of client machines on Lion Server, all using 10.7.4. I used WGM and Remote Desktop to make some changes and deploy software
Since then, I have been getting the following authentication popup on all client machines (twice after login, and then every 30 mins or so afterwards):
Mac OS S wants to make changes. Type an administrator's name and password to allow this.
The changes made prior to this happening were:
- Overplay VPN installed (using RD pkg install)
- Adobe CS 5.5 installed (using Adobe Enterprise Deployment Tool and RD package install)
- Evernote installed (using RD copy)
- Set computer name to computer record name (From WGM > Computer Groups > Preferences > Options)
I have now removed all the installed software from one machine, and log in as administrator, unbind the machine, rename the computer manually to the record name, rebind the computer.
As far as I can see, I have reverted all changes one at a time, and am still receiving the admin password requests when logged in as a network user.
The only machine that seems to be ok, is the one where the name change to computer record name was unsuccessful.
Does anyone have any suggestions as to how I can fix this issue?
Thanks
Suraj

Issue resolved. It turns out none of my changes caused the issue as much as Google Chrome Autoupdates. The new version constantly checks for updates which makes clients on Lion Server go haywire. Solution to turn off auto-updating:
Open a Terminal window:
defaults write com.google.Keystone.Agent checkInterval 0
Relaunch Chrome.

Cannot contact user after a name change

One of our users got married and changed her last name. My colleagues changed her name and alias in AD and in Exchange, and they changed her email address, keeping the old address as a secondary SMTP address in Exchange. I ran the following command
on the Lync server:
Set-CsUser -Identity "CN=JNewname,OU=HQ,DC=Corp,DC=Com" -SipAddress sip:[email protected]
After the user logged off the Domain and then logged back on, she could log in to Lync and could initiate an IM conversation with me. However, I still cannot contact her. She was never in my favorites list, and when I start typing her new alias,
she shows up in my Lync client with her new name and then "Presence unknown". When I try to initiate an IM conversation with her, my Lync client says "We couldn't send this message because we couldn't find Newname, Jane".
I have tried deleting the Lync local cache from my client machine and still have the same errors. What am I missing with this name change?
Thank you very much for your help.

Thank you! That must have been what I should have done after I changed the sip address. As it turns out, the contact had started working sometime before you posted this. Does this update process take place automatically over time and the
Update-CsAddressBook command would have forced the update immediately? I had changed the sip address about 2 hours before I posted this question.
Thanks so much for your help. I will incorporate this into a memo I am writing for making a name change.

EM not working Properly after computer name change

Hi Friends,
i hav 10gr2 DB, everything was fine.
last week my computer name changed, and EM stops to work.
so i reconfigure EM through command line.
after that EM started, but when go to 'Performance' or any other tab in browser.
its asks for login and shows 'oldcomputername:orcl:1521' in connection string.
so whats other things , i hav to change?
Thanks

Search every file under $ORACLE_BASE for the old name.
Assuming *NIX use find and grep.
Why do people rename servers? A name is a name is a name. All it ever does is cause problems.

Dreamweaver CS4 - Existing Site Name Changed in Manage Sites

Please help me! I have an existing site name from Manage Sites become slightly different site name from original.
For example, existing site name was fashionstars, now become ftp://fashionstars, with ftp:// in it. ( It happen when I did some try and error approach to do certain task, or press the wrong buttons etc) Is there any possibility to change back to original name fashionstars and how to do it? Otherwise I won't be able to upload files to remote site because of different site name appeared in Manage Sites.
Should I remove the modified site name ftp://fashionstars and recreate a new site name fashionstars and copy all exiting files from local site folder to new fashionstars?
Regards,
SSYYDD

Additional information, I use MacBook Pro to run Dreamweaver CS4. The existing site has 150 MB file size, hundreds of files, so to recreate new site name, it has to start to create all manually, will take a long time. Is there any other ways I can recreate site fashionstars without to start all over again?
I am very worry about this, it may not be able to fix it. My website is stuck, won't be able to upload files any more.
Another problem is that I lost the SITE DEFINITIONS for fashionstars or htp://fashionstars . When I go to Manage Sites to edit site of ftp://fashionstars, it goes to CONFIGURE SERVER, not the SITE DEFINITIONS for fashionstars or ftp://fashionstars. Please help me.
( note that I use the name fashionstars as an example only, not my real site name)
Thank you.
SSYYDD

Updates to website after domain name change

Can I still update my website using iweb after I transition to a new domain name?

I use third party hosting to mean a company other than Apple's .Mac. I also use godaddy to host my sites and it is very simple. They will provide an address of the ftp site name for your domain. I publish from iWeb to a folder, then use Cyberduck (any FTP program will do) to upload. You don't even need the ftp program because godaddy has their own simple ftp built in to the service. They also have excellent and free technical service. You can look at my site at: http://bandb.holage.com.

MSA Conntrans fails after machine name change

Hi
I have 5 remote laptops that have had their name changed and conntrans will no longer work.
When I ran SELECT @@SERVERNAME on database it retunred old name so I then ran
sp_dropserver 'oldname'
sp_addserver 'newname' , local
Stop / start SQL server
SELECT @@SERVERNAME now returns new name . However Conntrans still failing. Is the machine name embedded anywhere else ?
The mobile application does open it appears to be just the conntrans process that will not function.
Has anyone done this before ? Is it possible ?
Best Regards M

Hi Melita,
Please check note 1253027. This should solve your problem.
regards
Vivek

Help! How do I undo a Site Name change?

Stupid me typed in a new Site Name in Site Inspector and then hit update. Now, instead of typing in http://web.mac.com/toreadornottoread to get to mywebsite, people have to type in a ton of stuff that I never wanted. I simply mis-understood what the "Site Name" under Inspector, Site Inspector was for. I want to undo it, but it wont let me. Every time I erase the name I put into the "Site Name" box and try to update I just get an error beep. Please help. How do I undo what I did and take my site back to its original name/web address?
Drew

people have to type in a ton of stuff
When you click on this
http://web.mac.com/toreadornottoread
do you not get to your site?
What was the original name?
Have you tried simply double clicking on the site name in the organizer over at the left and renaming it there?

NitroX license disabled after computer name change

Hi,
We had to change the network names on several windows development machines containing the Nitrox environment.
After that change Nitrox wouldn't want to start on any of these boxes, failing to reactivate the license ("No activations left for this serial number").
That's certainly caused by Nitrox not recognising the machine it's installed on anymore.
What should we do now ? If only we had access to an admin console where we can control our own licenses it would be so simple.
Thanks in advance,
C dric Paternotte
SITEL Fribourg - Switzerland
Order Id INT001-5576
Nitrox 2.1.0M3 build 419, Eclipse 3.1.0, Windows XP SP2

Hi,
We are looking into this issue. In the mean time deactivate the license before modifying any of the system information.
If you are facing the activation issue, please contact [email protected] with OrderId & Serial#
Thanks,
M7 Support

ITunes won't download to specific folder after iphone name change in iTunes

I accidently changed the name of my iphone on iTunes. I have changed it back to what it used to be named. But, now when I download a song from iTunes on my phone. It will not download it to the specific folder it used to. Now it downloads it to a specific folder called "Purchased on iPad". Songs will stay there until I sync my phone to iTunes on my computer and I click "Transfer purchases". Then it takes them and places them on "Purchansed" tab. After I finish transfering perchases I disconnect my phone and I have to go back into itunes and go to purchased tab and have to redownload them again which go again into "purchased on iPad" folder on my phone and stay there until I sync my phone again to iTunes... its a vicious cycle and driving me nuts. Is there any way to have it downlaod again to my specific folder "purchased on iphone" and keep them there? Hope someone can help.

I actually tried with two other iPod software cds, uninstalling and reinstalling, and nothing is working.
When I go into the library and look for an import button none is to be found!!!

HT204053 After a name change, how do I create a new Apple ID?

I recently changed my name and would like to create a new Apple ID, then merge all the data from my old Apple ID into my new Apple ID. Is that possible, or will I risk losing all my data?

Welcome to the Apple Community.
You shouldn't change your account for iTunes, otherwise you will encounter problems with purchased content.
If you sign out and create a new account for iCloud in system preferences > iCloud and then sign back into your old account as a secondary account at system preferences > mail, contacts & calendars, you can manually transfer any data from one account to the other. Let me know if you need assistance doing this.

IPhoto can't find original photos after volume name change

I had to reformat my drive and do a fresh install of Mountain Lion. I was pleased that the Migration Assistant imported all the user accounts, apps, etc. from a Time Machine backup. Never could have done *that* with Windows...
However, in iPhoto, I *do not* copy pictures from my Pictures folder into the iPhoto library and iPhoto can't find them. I expect that this is because I changed the volume name when I reformatted the drive, which is embedded somewhere in the iPhoto package in my Pictures folder.
Does anyone know which iPhoto files I can edit or batch edit to change references from the old volume name to the new one? Is this information stored in text or XML files that I can edit or is it embedded in binary files? I thought I might be able to reimport the photos from the current volume and iPhoto would sort out the duplicates (not a great option if I get prompted for each one though...) but I wasn't sure if that would preserver events, faces, etc.
When I try to rebuild the iPhoto library, I get a dialog indicating each file cannot be found on the volume. While it provides an option to browse for the location, this isn't practical due to the 1000's of photos and movies on the drive.
Any help would be appreciated. Thanks in advance!

As OT says, the primary reason not to run a Referenced Library, and, most especially, not one where you have the Library on one Volume and the photos on another.
You're going to have this problem again and again any time you make a change to your hardware set up - including upgrading your machine and so on.
Going forward: Do you have Aperture? This has a command to Locate Referenced Masters which should help. Other than that, how are you at hacking SQL databases? That's what this guy did:
https://discussions.apple.com/thread/3216539?tstart=30
back up first...
Regards
TD

External access broke after site name change

Similar Messages

Maybe you are looking for