Fan Error message on T43 after replacing it.

I have a T43 (2687-DVU) that received a Fan Error at boot up. I replaced it with a new fan (am sure it is correct fru) and the fan is working fine. The temperatures are also fine on the unit (I can hear the fan, feel it blow out heat - bottom line the fan is working). I have reseated the unit a few times - made sure thermal paste is correct - connector to motherboard is connected (otherwise the fan will not work). I can ESC to bypass the error and run what appears normally. I don't think I have a fan error, except in the mind of a deranged motherboard, perhaps. I have 2 pronged question to throw out.
Would eveyone agree that this probably a motherboard problem or a fuse on the motherboard problem?
Secondly, since the unit is out of warranty, would you bother to replace the motherboard,or would you just hit the escape key and live with it. ( I know this is just an opinion in most regards, but just wondering if it's worth fixing just to avoid a keystroke at boot time).
Thanks

I'd be guessing something along the lines of a thermal sensor gone haywire.
If the machine were mine, I'd run it until it dies and then swap the planar if the rest of the laptop is still in good shape. But it's your ThinkPad.
My $0.02 only...
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

Fan error message on T60

I just received a funny noise and fan error message when I boot up my T60. I think I need replace the fan for my laptop. Can anyone tell me the part number and how to replace it. Thank you

Hello robertnguyen, welcome to Lenovo forums!
Please tell us your model number, not S/N.
That will help us to help you.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

Are you trying to update via wifi or connected to your computer?
 Cheers, Tom

Error message syncing iPhone after 10.5.2 upgrade

Error message while syncing iPhone after Leopard Upgrade to 10.5.2 : "The application AppleMobileSync quit unexpectedly" -- Anybody had the same trouble after this system upgrade? Any remedy advice would be appreciated.
Thanks

Chris66
Usually when this error message comes up, there is either corrupt data on the iphone or the computer.
First of all, disconnect the iphone and completely quit itunes.
Now, reset sync history as per the steps previously posted.
Next, open itunes and itunes preferences (itunes at the top of the screen > preferences).
Then go to the syncing or iphone tab and check the box to disable automatic syncing with all iphones and ipods.
Now click ok to close the preferences pane.
Connect your ipod and go to the info tab.
Set itunes to replace contacts and calendar information with what is on the computer.
Click apply in the bottom right corner.
If it is something in the iphone that is causing this error, this should overwrite it.
To narrow down what is causing this error on the computer, watch itunes when syncing the iphone to see what is trying to sync when this error comes up.
After the error message comes up, go into the iphone settings in itunes and uncheck the last thing itunes was trying to sync(usually contacts or calendars), then click apply in the bottom right corner.
This will start the sync process again.
If it is contacts that is causing this error, try creating a group in address book, move a few contacts into the group.
Then sync only that group to the iphone.
Keep this process up until you've narrowed down which contact or contacts is causing the issue.
If it is calendars causing the issue, you would go through the same process with a new calendar.
Hope this helps.

Getting error messages upon startup after installing Lab View 5.1.1.

I have recently purchased a DAQ system along with a computer, which uses a readout program written in Lab View. however, after installing Lab View 5.1.1 on this same system, I started getting some error messages and the readout program no longer works. Here are the error messages:
"The \SystemRoot\system32\drivers\nidmmk.dll device driver could not locate the entry point ?single PointWrite@mdsSimpleDIGPortPrimitive@@UAEXKKKAAJ@Z in driver Nidaq32K.sys"
as well as
"The ordinal 2011 could not be located in the dynamic link library nidaq32.dll. An error occurred while loading VT Digital buffer write.vi"
I would greatly appreciate any help I can get.

Hello,
Installing LabVIEW should not effect an installation of NI-DAQ. However, it seems to me that we may have installed a different version of NI-DAQ on top of the current version. This is very possible because the old LabVIEW CD�s contain NI-DAQ on them.
In this case, there is not an easy solution, we could try uninstalling and reinstalling combinations, but it will probably save the most time and effort to uninstall all National Instruments products and reinstall them. The best way to do so is from the ADD or REMOVE Programs utility from the Control Panel. Then we want to remove the following registry keys (BE SURE TO BACKUP YOUR REGISTRY!!)
HKEY_CURRENT_USER\Software\National Instruments <-- Delete the entire tree!
HKEY_LOCAL_MACHINE\Software\National Instruments <-- Delete the entire tree!
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and delete registry entries containing any keys with 1093 in them.
Do not worry if any of these trees are not listed. If you have Administrative rights, and you still cannot delete these keys, that is also OK. Continue with the remainder of the process.
Make sure that you do not have any of your own VIs or other files saved in the "C:\VXIpnp", "C:\Program Files\National Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a different location. If you are concerned about keeping old virtual channels and your SCXI setup intact, then backup the "C:\WINDOWS\niconfig.daq" file, too. Delete all folders and files mentioned above.
Note: If you have Windows NT/2000, replace "C:\Windows" with "C:\WINNT" in the paths listed above.
Once these steps are taken care of, we should have clean system. You probably want to reboot and then reinstall the software. You should install development environments first, and then install drivers.
Just let us know if this does not take care of the problem, or if you have any questions on how to complete a step of the process.
Best regards,
Justin T.
National Instruments
NOTE: Turning off virus scan programs greatly increases the speed of uninstalling and reinstalling.

HT1926 reinstalled itunes after unistalling it due to error message during update. after it was completly unistalled still has the same error message: service "apple mobile device" (apple mobile device) failed to start, verify you have sufficient priviled

I was prompted to update itunes this evening. I did and in the process, it came up with the following error message: Service "apple mobile device" (apple mobile device) failed to start. Verify you have sufficient priviledges to start system services. I unistalled itunes completly and reinstalled but am still getting the same error message. If I click "ignore" the program will finish downloading but will not launch due to "not being installed correctly". Please help, I use this program alot with my first grade classroom and they're expecting their listening center in the morning.

Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!!

ITunes error messages while syncing after 0SX 10.6.6 update

After installing the recent OSX 10.6.6 update, I am receiving the following error messages in iTunes when trying to sync both my iPhone 4 and my 1st generation Apple TV:
iPhone error message:
"The iPhone cannot be synced. The disk could not be read from or written to."
Apple TV error message:
"iTunes cannot sync photos to the Apple TV because of a problem on your computer. The disk could not be read from or written to."
I'm not sure if this matters - but in the iPhone error message - it does not state if the "disk" is the iPhone or the computer - but in the Apple TV error message it does make this distinction, saying that the problem is on my computer and specifically mentions photos.
Now, once I dismiss either of the error messages, the sync progresses normally and completes successfully. Also, I have checked my computer (MacPro) and all diagnostics (including the internal hard drives) pass with flying colors. And the computer is working fine otherwise - so I have no reason to believe that there is a hardware problem with the computer. And I would find it very strange that I would have a hardware problem with both my iPhone and Apple TV appearing at the exact same time. And finally, both the iPhone and Apple TV are performing normally when in use.
Since this problem did not start until after running the 10.6.6 update - logic tells me that is where the problem probably lies.... the question is how to resolve it - anyone have any ideas?

Both those symptoms are consistent with a damaged photo cache. If you remove your existing photo cache as per the instructions in the following document, does that get you past the error?
[iTunes: Photo sync creates iPod Photo Cache folder|http://support.apple.com/kb/TS1314]

Why am I getting an error message when trying to replace existing music on itunes

How do I stop the error message from showing up when I try to replace existing music on my iTunes?

You are getting an error message because there is an error.
Knowing wht version of Pages you are using, what template you are attempting to open, and what error message Pages is sending you might help determine why you are getting that specific rror message. Without those, the first sentence above i pretty much all that can be said with any assurance.
Regards,
Barry

Error message in WebGUI after adding fields with EEWB - Class doesn't exist

Hello!
After adding fields to the component BT111H_OPPT within EEWB and BSP_WD_CMPWB I recieved an error message while trying to open an Opportunity in the WebGUI, stating:
Cannot display view MainWindow
An exception has occured
Exception Class CX_SY_DYN_ILLEGAL_CLASS - Method call of IF_BSP_WD_DYN_RT_REP_SUPPORT~GET_URL_PARAMETERS failed; the class ZL_BT111H_O_BSPWDCOMPONEN_IMPL does not exist
Method: CL_BSP_WD_COMPONENT_FACTORY=>GET_REPOSITORY_XML
Source text Row:25
An exception occured during the activation of target view CUBTOpptOverview.MainWindow for the navigation
An exception has occured
Exceptions Class CX_BSP_WD_RUNTIME_ERROR - View CUBTOpptOverview.MainWindow could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source text Row:162
Has any one an idea, if this could be a bug or what went wrong? I am especially irritated, that it seems, that class was not created. After all I never changed any tables or anything in the background manually. I just used the standard tool EEWB, nothing else.
Many thanks for any kind of help!
By the way, I tried to go back all the steps I took previously to, kind of "un-do" my error, but I was not able to delete all created extensions, due to a another error - but that's a different story, or isn't it?
Cheers,
Marek

Hello Experts,
I know my question was a tricky one and no-one was able to help me from this forum. That's why I would like to share with you the solution I just recieved from SAP:
Although all classes that were created whilst extending the component BT111H_OPPT were deleted, there still existed a seperate extension definition in ViewCluster BSPWDVC_CMP_EXT still persisted.
I wasn't aware of the fact, that I had to delete that too.
Note: in order to delete ViewCluster, use tx SM34
The problem ist now solved!
Cheers!
Marek

Error messages when installing After Effects

I'm receiving a number of error messages when my computer attempts to install After Effects after downloading it . . . . DW050, DW65, DF036, DW063, DF024. Any ideas what's going on here? (I'm getting the same error messages with Premier Elements and Fireworks and Audition as well.)

http://forums.adobe.com/community/download_install_setup?view=discussions
And by all means provide the full log extract and system specs, not just those obscure numbers.
Mylenium

"IWD Bus Enumerator disabled" error message in LSC after Windows 8.1 upgrade

Hi there,
I just upgraded my T430 from Windows 8 64-bit to Windows 8.1 64-bit.
After restart, LSC shows an "IWD Bus Enumerator disabled" error message. I went to the device manager, right clicked on IWD Bus Enumerator and selected the "update driver software" option. Message came back that the latest driver is already installed. By the way, in the device manager there are two lines "IWD Bus Enumerator", where the first line is normal (i.e., enabled), and the second line shows that error message (yellow triangle).
What next? Any ideas? My laptop seems to work fine, otherwise.
Best,
Sven
Solved!
Go to Solution.

I resolved my issue by going to device manager and selecting View Hidden Devices - then expand System Devices
In my case there were 2 listings for IWD BUS ENUMERATOR - one had the yellow triangle - I uninstalled that one and restarted my laptop and the message was gone. If that does not work make sure you get the latest drivers from Lenovo and also visit Intel.com and search for WiDi - they have some programs to check drivers.

[Solved] 'New' error messages during init after updating initscripts

After updating to the latest initscripts, I got some error messages during init that I hadn't seen before. They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled. The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
In any case, I downgraded and found that the errors were nothing new. I'm just curious if the appearance of the errors during init was by design or a happy accident.
Last edited by alphaniner (2011-08-01 17:07:30)

alphaniner wrote:
karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
http://projects.archlinux.org/initscrip … 328fbaf2e7
http://projects.archlinux.org/initscrip … 42dfeca8c2
I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
You need to reboot.
After you do, run
tail /var/log/boot
Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
[karol@black ~]$ tail /var/log/boot
Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1

Itunes error message - 42408 even after latest download...thank you

I've been getting a message saying Itunes cannot be accessed - so just updated to Itunes 11.1.3 but still getting error message -42408. Any thoughts?
Thank you and Happy New Year

Hey there davidgor2!
I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
and the specific part of the article you will want to look at first is right here:
"Error 42023" through "Error 42408"
These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
Install the latest iTunes from apple.com/itunes/download/
Remove the SC Info folder.
If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
Thanks for using the Apple Support Communities!
Regards,
Braden

Error Message concerning template after starting the application

Hi all,
I just developed a WebDynpro Application in which a Adobe Form is used in one view.
After deploying and starting the application I am expecting, that the view with its adobe form is displayed.
Unfortunately I am getting, the following error message:
<b>com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: IOException occured while creating template stream from the TemplateSource : ./temp/webdynpro/blablabla.Adstest2/Adstest2View_InteractiveForm.xdp (No such file or directory)</b>
Does anybody know how to solve this problem?
Thank you in advance.
Best regards, Patrick.

Hi Patrick,
Make sure ADS is configured properly on server & credentials are installed on ur server.Check whether pdfSource is available .It looks like a configuration problem bcos xdp file get generated automatically with adobe form.
regards
Sumit

How do you clear Error Message 3100? After installing the New inks, On NEW 'Canon MX432' Printer

Have NEW ‘Canon MX432’, (1)-followed the instructions to set language without problem, next step, checked for the Set ink cartridge Message, (2)-and then opened the Paper Output Tray and the Paper Output Cover.
On the second try; (3)-the Head Cover opened automatically, (4)-then lowered the Color Ink Cartridge Lever, (5)-Unpacked the FINE Cartridge and remove the protective tape, (6)-then Inserted the FINE Cartridge straight in until it stopped, (7)-and lifted the Color Ink Cartridge Lever.
Next did the same steps (8) - (9) - (10)- (11)-to the Black Cartridge, next (12)-Closed the Paper Output Cover.
*** Should I have waited and lifted both Levers at the same time? ***
(13)-Waited for printer, (14)-got error Message; ”Printer Error occurred”, then the numbers; “5100”.
Have tried unplugging the printer a few minutes and repeating the steps from the start to no avail.
Next will go buy new Ink and try again or return this Canon MX432 Printer, for a different Model.
Do not want to install new Ink Color and Black Cartridges until I understand the problem solution.
Have used Canon products for over 30 years never had this problem or any problems with their products which could not be resolved by me.
Steps Followed:
*** Do you see a problem with these steps taken? ***
(1)- Set language
Waited for the “Set ink cartridge” Message
(2)- Opened the Paper Output Tray and the Paper Output Cover
(3)-The Head Cover opened automatically
(4)-Lowered the Color Ink Cartridge Lever
(5)-Unpacked the Color FINE Cartridge and remove the protective tape
(6)-Inserted the FINE Cartridge straight in until it stopped
(7)-Lifted the Color Ink Cartridge Lever
(8)-Lowered the Black Ink Cartridge Lever on the left
(9)-Unpacked the Black FINE Cartridge and remove the protective tape
(10)-Inserted the Black FINE Cartridge straight in until it stopped
(11)-Lifted the Color Ink Cartridge Lever
(13)-Closed the Paper Output Cover
*** Should I have waited and lifted both Levers at the same time? ***
(13)-Waited for printer
(14)-Got error Message: ”Printer Error occurred”, then the numbers; “5100”

Hi Anselmo_MSW!
It looks as though you have followed the correct steps and no, you do not need to lift up both levers at the same time.
The error code 5100 indicates that an internal error has occurred which may be resolved by resetting the printer. Please follow these steps for isolating and resetting the printer:
1. Open the printer's front cover, and then open and close the print head lock lever (do not remove the print head).
2. Make sure all ink tanks are seated properly.
3. Make sure all packing materials have been removed.
4. Make sure no paper is jammed in the printer.
5. Disconnect the printer cable from the printer.
6. Close the front cover and turn the printer off.
7. Unplug the printer from the power source, and then plug it back in after five minutes.
8. Power on the printer.
If the error returns, the printer will require service options. I realize you have just purchased this and wanted to let you know that this is not the normal operation of our printers. What I would recommend is contacting a Canon Representative using the following link to learn of your service options. Contact Us.

Fan Error message on T43 after replacing it.

Similar Messages

Maybe you are looking for