Field selection for movement type 561

Hi Guru's,
i want to add value field in the movement type 561 to while uploading the stock i can add the total quantity with total value, if i am wrong correct me, with detailed process.
Regards,
qsm sap

Hi QSM SAP!
The value of the stocks to be uploaded using MvT Type 561 can be placed in the External Amount in Local Currency Field. To show this field during goods receipt:
SPRO - MM - IM and PI - Settings for Enjoy Transactions - Settings for MIGO - Field Selection per MvT Type - New Entries - (561 EXBWR) then set as either required or optional.
Hope this helps! =)

Similar Messages

Field selection for movement type 601 account 894025 differs for cutomer

While posting goods after saving delivery merror message
Field selection for movement type 601/aact 894025 differs for customer goods movement
I tried OMJJ>Mvtmt Type>601>Field selection enjoy>601 KONTO Optional field
Now this is only happening in the cases where I have assigned free goods Inclusive 10MT. If the order is less than 10MT (that is if no free goods attached) posting is accepted & billing & account determination is processed successfully.
I am unable to identify the reason though I have worked a lot on MM/Fico on the system.
Please provide your valued inputs why this is happening?
Thanks for your time.
Rajiv

Hi Raja,
Thanks for prompt reply.
I shall appreciate if you elaborate how to check
check the Field selection goup in control tab for that GL
I tried OBC$--> (Is this correct?)
I checked cost center field G004 -->Addl Act assignemtn -->Cost center which is Optional entry. Should I check any other items on the screen as I am unable to understand which field is applicable on a/c field.
Profit center, cost object are in G004 as supressed field.
So should I make optional? So thing will work.
Other Q should I also consider G025 Inventory adjustment account? As per error this a/c is not shown. So pl advise me steps or heading which I should consider.
Thanks for yr time.
Rajiv

FIELD SELECTION FOR MOVEMENT TYPE AND ACCOUNT

Hi,
I am trying to do the Post Goods Issue (PGI).
But, the system is throwing an error as mentioned below.
Field Selection for Movement Type 901 / Account 4070000001 differs for Customer Goods Movement (015)
I made the Cost Center as Required Entry. But, there was no effect on the PGI.
I could not make out the exact error.
Please guide me properly in this regard and do the needful.
Thanks in advance.
Thanks & Regards,
Srinivasa M.S
+91-9910077829

Hi,
On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
Regards
Chandra Shekhar

Field selection for mvmt type 543/acct 895000 differs for vendor goods mvmt

Hi Pals,
While i post for goods receipt for subcontracting items, it is showing this error
" Field selection for movement type 543 / acct 895000 differs for vendor goods movement "
Kindly help me to resolve this plz.
Thanks&Regards,
Prasath

Hello
what you need to do is, run the program RM07CUFA check for the field status of the particualr movement type for which the system is throwing the error.
Note that if there is a mandatory entry under G/L account then it should be a mandatory entry under movement type field status also.
Go to FS00 and Select your GL account and click on Change Mode and in Create/Bank/Interest tab double n Field Status Group.
Then goto OBC4 and make the change in the field selection for the field status group you got from FS00 for that account. (make the vendor for goods movement as display/optional/required as in the movement type)
Also see the field selection for movement types in SOMCJ for movement type 543.
Regards

Fld selection for movement type 601/ act 425000

hi all
When i try to do PGI for delivery, i am getting given below error.
"Fld selection for movement type 601/ act 425000 differs for customer goods movement (015)" Please guide me to solve this issue. Rgds
Madhavan

Dear Madhavan,
For mvt type 601,in OMJJ, customer field is set as optional.
You can check this in OMJJ - mvt type 601 - field selections - Material management.
Check in FS00 - the field status group assigned to GL account - 40005900, then open the attributes of that field selection group in OBC4, check customer field is suprresed.
You can change either (suggest to check with FI consultant to change in field status group).
Alternatively you can go to t/code se38 & run RM07CUFA program with variants to compare these two settings and make necessary changes.
Hope this could help you resolve this issue. TQ
rgds,
nema

Fld selection for movement type 601/ act 425000 differs for customer goods

hi all
When i try to do PGI for delivery, i am getting given below error.
"Fld selection for movement type 601/ act 425000 differs for customer goods movement (015)" Please guide me to solve this issue. Rgds
Madhavan
Edited by: Madhavan SR on Apr 14, 2010 3:09 AM

Hi,
Please run report RM07CUFA for the movement type and account, and check the field selection for
"Customer goods movement" if the setting is consistent or not.
Thanks and regards,
Polly

Transaction Key for Movement Type 561

Hello,
For movement type 561, I know one of the Transaction Key is BSX. I would like to ask what is the other Transaction Key as I would like to set the GL Account Determination. Thanks.
Thanks.

Hi
Transaction keys required for 561 movemnt type are
BSX - For the inventory posting
GBB - BSA - For initial entry of stock balances
For performing the 561 movment G/L account needs to be assigned to both these transaction keys.
Thanks & Regards
Kishore

Fld selection for mvmt type-561/acc399999 differs for ext GA amount in lc

Dear pp experties
When i am doing MB1C mvmt type 561, in repetitave manufacturing, i am facing one error message,
the error message is (fld selection for mvmt type-561/acc 399999 differs for ext.GA amount in LC(023),I already checked g/l acc(fs00), already creted in plant 1234.
pls explain i am very thank full in adv
devendra (pp)

Hi there,
I think you have mistaken the forum.
can you please explain how the current error is connected to CAF and/or GP?
Regards,
George.

Field Seletion for movement type / acct differes for BA

dear all
while posting in MM the user is facing the problem and error message
Field Seletion for movement type / acct differes for BA
please let me know if i can do some thing with Field status variant in FI
I am not able to figure this out

If you Run Program RM07CUFA in SE38 and compare movement type and GL you can see the
comparison of the field status variant of the movement type and GL
Hope this will resolve your issue
Bilal

Define Field Selection for Move-In Contract Data

In Move-In customization, in IMG activity u201CDefine Field Selection for Move-In Contract Datau201D when you go for u201CField Selection u2013 Modifiable Fieldsu201D Screen (Transaction is EQ07), I am seeing four buttons as follows.
u2022     Modified
u2022     Influencing
u2022     Screen Groups
u2022     Influences
I would like to know the applications of that buttons.
Also, if I click the u201CModifiedu201D button, it takes me to another screen in which I am seeing seven buttons as follows.
u2022     New Values
u2022     Delete Value
u2022     Influencing
u2022     Modifiable
u2022     Screen Groups
u2022     Influences
u2022     View
It would be really great if someone explain me about this.
Thanks,
Meenakshi Sharma

hi meenakshi
here are some data 4 u
modified---if u click that u will come to know whther any field is modifies or not previosuly
influence--after u make a modification the effect or the change is shown in influences
screen gpr os nothing but all the main and sub screens involved for a particular transaction
influencing field is something like u   have some connection witht that field,for example click screen grp and screen modification in contract and then click infuencing u can see the 2 fields whch are set as influeincg fields for contract
u can change the selection fro i/p to diaply and save it and see the changes or details showed by clicking each button..hope u willl finds a lot urself
kr
raj

Is it possible auto TO for movement type 561? if so, how ?

Hello,
Could any one suggest whether auto TO possible or not for movement type 561?
regards
rk

Hello,
when a transfer requirement or a posting change notice is created from the movement type,the transfer orders are created by batch input using the report RLAUTA10 (for transfer requirements) or RLAUTA11 (for posting change notices).
You post the document using 561 movement type. If related setting for auto TR creation (T-code OMKX) is done then TR will be created in the background. You can create the TO automatically from this TR using report RLAUTA10. Refer T-code OMKZ for Auto creation setting. You can also proceed for immidiate creation of TO.
Thanks
Milind

MIGO - GR - Others -- Serial Number Not saved for Movement Type : 561

Hello,
I am trying to post good receipt-other ( for movement type 561) using MIGO transaction. I have specified all required data.
Also depending on the item qty., I entered serial number in serial number tab.
Its creating document successfully. However if I try to display same document using MIGO, serial number is missing.
I tried to debug the code and I realized its not saving serial number itself.
For other movement type its creating document with correct serial number.
If I repeat same process using same data using transaction MB11 its posting successfully and I can see serial number using MIGO transaction as well.
One more thing which I've noticed is when I post document using MIGO, Account assignment details are missing. However with MB11 I can see account assignment data too.
Would be really appreciated if someone can help me on this. I dont know If I'm missing any configuration part here.
Thanks & Rgds,
Nilesh

Any help Experts?
Nilesh

Field selection for mvt type 544/acct 423001differs

Hi Guru's
Scenario
In Subcontracting
while doing reverse of Goods receipt this error is occuring.
Can anybody help me.
Rgds
Ana.
Edited by: ana kamat on Dec 20, 2008 8:21 AM

Hello
In SE38 run RM07CUFA
System will shopw for whcih field there is incompetability.
Then goto OBC4 for G/L field selection and OMJJ for movement type field selection.
Both the field selectons should be compatable.(ie a field which is display for movemeent type shouldn't be requreid entry for G/L. likewise)
Regards

MB11/MB1C/MB1B post GL entry for tax for movement type 561 initial stock

Hi,
We want to bring in stock into new system using movement type 561. The usual account posting is:
Debit stock
Credit account in OBYC GBB
How can I add additional tax posting in the transaction? For e.g.
Debit stock
Debit input tax
Credit account in OBYC GBB
I tried to open up the Tax Code in the movement type field status but it doesn't show up in any of MB11/MB1C/MB1B.
Any customized BAdI/user-exit for this?
Any suggestions?
Thanks in advance for help!

hi,
you cant update the tax account directly using the 561 mov type.
please find below the link for more clarifications regarding the tax accounts.
http://forums.sdn.sap.com/thread.jspa?threadID=2126200
Regards,
velu

Purchase order field optional for Movement type

Hi SAP friends ,
Please let me know the config path to make the purchase order field as optional for particular mvt types that are used in MIGO transaction to receive the overage stock or reversal of overage stock
Regards,
JR.

Hi John,
If your posting a 101 movement against a purchase order then there is probably no way of making the PO optional, as this is a designed process
I guess I need to understand the process in more detail
In the Interim please look at the following customising settings
Materials management > Inventory management > Inventory management and PI > Field selection for for goods movement
Materials management > Inventory management > Inventory management and PI > settings for enjoy transactions > fields for goods movements
Regards
Steve

Field selection for movement type 561

Similar Messages

Maybe you are looking for