Fixed material qty rate

Hi
I have one requirement where for 1 material supplier wish to supply the material on fixed rate basis. Whehter u placed order for 50 pieces or 1000 pieces the rate will be fixed 500rs.
How can i handle this problem?
Thanks in advance

Hi
Basic Price Condition Type  is based on the Calculation Type Qty  , so as you change the Qty the Value in the Basic Price Changes.
What you need to have a Fixed Value Condition Type in Such Cases.
goto M/06 , Clcik on the Condition Type PB00 if you rae using this as the gross price ,you copy the PB00 & create a condition type ZPB0 use the same & change the Calculation TYpe as B - Fixed Amount
Use the same in the Pricing Procedure & use it in the PO.
Thanks & Regards
Kishore

Similar Messages

  • Fix Date & Qty Field in Schedule Lines Sales Order

    Dear Friends,
    I want to understand the need and use of the Fix Date & Qty field check in the sales order -> Item -> Schedule Lines.
    Can anybody explain me the need of the same.
    Regards,
    Harsh

    If the availability check for an item determines that the item cannot be delivered fully on the requested delivery date, and, as a result one or more schedule lines have to be created for later delivery dates, the customer can decide whether to accept these delivery dates and quantities.
    You can record the customer's decision either by setting an indicator in the Fixed date and qty field or by leaving this field blank. The field is displayed both on the schedule line overview screen and on the availability screen.
    <b>Customer Accepts the Schedule Line Proposal</b>
    If the customer accepts the schedule lines which are proposed by the system, mark the Fixed date and qty field. The system then transfers the requirements for the schedule lines to material requirements planning.
    <b>Customer Requires Goods Earlier</b>
    If the customer requires the goods earlier than the date that the system can confirm after the availability check, leave the Fixed date and qty field blank. The system then only passes on the requirements for the requested delivery date and does not take the quantities and dates confirmed by the system after the availability check into account. In this case, it is assumed that the requested delivery date can be kept to because, for example, additional production capacity may become free. The system only confirms the sales order once the entire order quantity can be delivered on the requested delivery date. In the subsequent delivery processing, the sales order is only considered to be completed when the entire order quantity has been delivered or when all partial delivery agreements have been fulfilled.
    A fixed item is considered to be completed once the entire confirmed quantity (which can be smaller than the originally requested order quantity)has been delivered. Therefore, it does not make sense to fix the confirmed quantity to 0 as the item is considered to be completed from the start.
    During rescheduling, the fixed quantities and dates are no longer taken into account.
    The same info u can get easily from help.sap.com
    Message was edited by:
            sam masker

  • Report for Comparison of Material Qty

    Hi All,
    I need to Develop an Interactive report for Comparison of Material Qty. ordered through Purchase requisition, ordered material through PO and corresponding Material Receipt report.
    Can Someone Give a brief description about this & fields tcode & tables regarding this report.A sample code would be much appreciated.
    Thanks & regards,
    Ravi S

    To get the material number combined with the PO text you will need the help of an ABAP programmer.  The programmer can create a report for you using the function module READ_TEXT in the function group STXD.  The tables to use are:
    STXH - STXD SAPscript text file header
    STXL - STXD SAPscript text file lines
    The selection screen should have at least the following:
    OBJECT - STXH-TDOBJECT
    NAME - STXH-TDNAME
    LANGUAGE - STXH-TDSPRAS
    TEXTID - STXH-TDID
    You find the information for these fields by going to the PO text entry screen and displaying the header information under Goto -> Header.  For materials, the object is MATERIAL, the name is "material number", the language is "EN", and the text ID is BEST.  You can use this program to get long text in lots of places like information records, purchase order texts, etc.
    Hope this helps.

  • Material Qty. of Shop floor material

    Hi,
      I want to make a report with certain dat along wiith this I also want material qty. of production florr  means  material isue agains production order or any order to production but partial return or not retun in which table i can get those qty.
    regards,
      zafar

    Dear Zafar,
    You can get in table AUFM
    Else report COOIS, in list just input as components & give plant & basic dates as from & to ( 1 month )
    You can get required qty & issued qty
    Regards
    Madhu

  • How to block the material qty to 1 while creating sales order (VA01)?

    Hi All,
    Scenario :  We have 20 Materials each with 100 qty in Plant. In the sales order we should have all the 20 materials with qty one. The sales order should throw an error if the material qty is more than 1 and should not allow to create a sales order.
    so is there any transaction code where we can block the entire material qty to 1 from the same plant while creating sales order?
    Note: We should not set in MM01 "Minimum order qty". Assume we have 100 material in plant we can't set for each material one by one "minimum order qty".Instead of that is there any option to set the whole material qty to 1 as minimum while creating sales order?
    Kindly guide me how to proceed.
    Thanks,
    Renjith

    If you have access to idoc before calling the processing Function module, Adding header text segments E1EDKT1 and E1EDKT2 to the idoc will create the header text.
    Regards
    Sridhar

  • Problem with Indicator: Fixing of Exchange Rate

    Dear All,
    i have a PO, where the "Indicator: Fixing of Exchange Rate" ist set. But in the header info of the goods receipt there is not the rate from the po, there is the actual day rate. And the system book the rate difference value to G/L Account 'exchange loss' and 'price and inventory difference'. I the note 518114 they write, if this flag is set, the system uses this exchange rate.
    Is there maybe any wrong customizing or why does the system use the wrong rate?
    Thanks & BR

    Hi,
    Check the GR Posting Date and Date on which you have activated "Exchange Rate Fixed" Indicator (Check in ME22N - Environment --> Header Changes).
    Whether it has been activated after GR Posting Date.

  • Block sales order creation based on material qty

    Hi,
      In my scenario i want to block the sales order creation based on material qty , how i can do this?
    Example:
    Material qty below 100 = able to create sales order
    Material qty above 100 = not able to create SO
    Thanks,
    Arun

    Hi
    For restricting the order if it is less than a specified qty, you can maintain the 'min order qty' in material master.
    But your requirement is the other way round - Restrict order if it is more than specified qty.
    In this case, you need to use the following sales order exit  in progran MV45AFZZ
    u2022     USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    Hope this helps.
    Regards
    Madhu

  • Material Qty short

    Hi Gurus
    I am  facing the problem during the confirmation of TO  with ref to delivery  . Delivery was created & when I am trying to  confirm the TO it is showing that 4 material qty is short   It is giving error message VL198  .
    In  my item category  customization picking tick mark is  “Unchecked “  in t-code – OVLP   & also maintained  as “Y” in   configuration ( SM30 - V_TVLP-VERPR) .
    My material is batch managed & stock is showing in the LX02 report  which is enough  to confirm the TO  .
    Batch is also  not showing any kind of  block & it in unrestricted use stock  . Only things is to be noticed that  in MD04  we have some safety stock  requirement at plant level  .
    Please let me know where I am  doing mistake . Please  also let know whether system checks  safety stock also  while doing confirmation
    Thanks ,
    Regards,
    Aman

    See my blog Unrestricted use stock not equal to available stock
    I tried to explain the fact that is named in the titel.

  • Fixed material code and quantity in every BOM

    Hi All,
    I have a requirment of adding a fixed material code to every BOM. This means that whenever the user creates a BOM, that fixed material comes by default with fixed quantity and the user will not be able to modify or delete that material.
    Is there any way in to do this. Please advise
    Thanks & Regards
    SAPXPT

    Hi,
    i think sap standared not provide the same u need to do some exit .
    Contact Abaper.

  • Raw material qty & value

    hi all
    Raw material qty. is zero in mmbe,mc.9 & material master plant stock .But it shows -ve value in  material master & MC.9
    Whyvalue  is -ve?

    Dear,
    Same Problem i am also facing when i am exexuting MC.9, for ZERO Stock its showing val.valuated Stock
    +ve for some material and -ve  for some materials.
    when i raised a OSS msg to SAP they are telling this id due some of the Info structure tables were not updated i.e S031,s032 and s033 (use Se16 give ur material for these table u wil come to know)
    they have give some note to statistical build but my invoice documents are very old i.e 2001 and 2002 Fiscal year.
    my advice just raise a OSS msg to SAP.
    other check ur data again by executing the T.code MC.9 under valaution sub tab instead od standard please select current price.
    Please gothrough these notes if at all useful79083,64636.
    180952 Negative stock values in Inventory Controlling (MOST RELAVENT)
    487674 Negative consumption value after cancellation movements
    358284 No values for negative stocks
    672183 'Value stock with receipt' is incorrect
    416791 Standard analyses: Error with rounding differences
    453420 Incorrect stock values in LIS
    Please help me if you get any soluation
    regards
    venu gopal
    Edited by: venu kk on Jun 2, 2008 9:15 AM

  • About  Fixing of Exchange Rate

    hi
    i has purchase order with usd purchase order currency ,i used Fixing of Exchange Rate with this purchase order with fixing
    exchange rate for good receipt.
    as sap said "If you fix the exchange rate, the purchase order currency and the exchange rate cannot be changed during invoice verification".
    but for this usd purchase order ,vendor incoming rmb invoice .how can i process this .

    Hi,
    During MIRO if the exchange rate is fixed in P.O it will nto change
    what do you mean
    but for this usd purchase order ,vendor incoming rmb invoice .how can i process this please clarify
    G.Ganesh Kumar

  • FM for material QTY instead of amount

    Hi All,
    Is it possible to take material QTY in FM. My client want to budget sales target on QTY basis in FM.
    I was thinking if we derive commitment from QTY in FMDERIVE it can work but how to trigger budget with QTY and not amount.
    Thanks,
    Vishal

    Hi,
    The budget in FM is working on amount basis. You can define your commitment management to be triggered by quantities (based on UoM setting), but I guess it's not what you are looking for. PSM-FM is not built to control quantities. You have to manage it via CO planning or logistic modules.
    Regards,
    Eli

  • Setting fixed the exchange rate field (KUFIX) ticked by default me21n

    In the transaction ME21N to create purchase orders, there is a field to fix the exchange rate (KUFIX). We want to set this field to 'X' as default value, when the user call the transaction. Does anybody know a user exit or a BADI where I can modify/set this field.

    Hello everyone,
    I'm also have the same requirement.
    Any way to set a default value to KUFIX field?
    Thank you.
    Anthony

  • How  to make the Fix Date & Qty automatic

    Dear Friends,
    In the Sales order schedule line there is an indicator  Fixed Date & Qty.
    How can I make this indicator to be automatic  when I create the Sales Order.
    Please help
    Ravi

    Hi Ravi,
    Goto SHD0 T.Code and create a transaction variant.
    Assign the same to your sales order type.
    When you try to create a sales order then this will be ticked by default.
    The same you can do in OVZJ T.Code also.Here against your sales area,you have to tick it.
    Regards,
    Krishna.

  • Cs11 not Display Alternate Material Qty

    Dear Experts
    Whenever we r Putting Alternate Material in BOM and Set it Prioty And define the Qty as similar with other one and after that
    whenever we r checking Display in Cs11 Then System will Not Show Us the Alternate Material Qty And Also The Qty of Number 1 Material whose alternate is Define. both material R Blank Qty .
    What would be there.
    Rgds
    Pankaj Agarwal

    Dear Pankaj,
    Whenever you are checking the BOM display using T code CS11for a product which has alternative item group,then after
    executing the report,click on the change layout(control+F8) and select the fields like component quantity and not
    comp.Qty,and also usage probability and alternative item group,because if you have only the field comp.Qty,then in case if you
    have given the usage prob as zero means then it wont get displayed in the report.
    So select the change layout and select for the field Component quantity and check the same.
    Regards
    Mangalraj.S

Maybe you are looking for