Flex not making server calls

I imported some web services that are SOAP calls. When I run the application in debug mode they make the calls just fine. When I upload it to the server and click the button it doesn't make the call. I tried using Firefox/Firebug and IE/Fiddler. In both browsers it just never makes the call, there's not net activity at all.
This is my call to the web server:
Login.addloginUserEventListener(completeLoginUser);
Login.loginUser(params[0], params[1], params[2], username.toLowerCase(),MD5.encrypt(password), 0);
Any ideas?

In case it does have something to do with the cross domain thing, I have a file call crossdomain.xml, as far as I can tell it's correct, here it is below:
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="*" />
</cross-domain-policy>

Similar Messages

Charged for not making a call

When i call my daughters mobile I let it ring twice and then hang up before she answers, she then calls me back, why am I charged 21 pence for simply ringing her number and not making a call.

that sounds like a call set-up fee
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Not making / recieving calls?

Recently started encountering trouble with my iPhone 3G where it will 'stall' upon connection of an incoming or outgoing call. In either case the phone will ring (sometimes on outgoing calls it will cut off before this) but on connection the iphone cuts off and seems to stall for a few seconds. After this it acts very 'sluggish' and usually needs a soft reboot to get operating again properly. It manages texts and emails perfectly well, it just seems to be having trouble with calls.
I haven't installed any new apps recently and I have tried restoring the phone but to no avail.
Has anyone else experienced this issue and how did they get around it?

There are a lot of posts about this problem, I have been having trouble since my phone completely froze and I did a complete reset and used the backup I had to restore the phone. Today I spent the morning speaking to Apple who suggested a restore to factory settings and then sync as if a new phone. That is not to use the backup previously made. So far so good but I shall wait a while to see if all is well. O2 are sending a new sim card incase this is at fault.
Some people have had replacement phones, Carphone Warehouse suggested it was sent back to Apple but again I am waiting to see if the hard restore has worked.

IMac FaceTime not making/accepting calls from iPhone

I have Yosemite installed on my iMac, and IOS 8.1 on my iPhone 6. FaceTime on both are set to receive/make cell phone calls. Both are on the same WiFi.
When the iPhone rings, a dialogue box appears on the iMac for me to click Accept or Reject. If you Accept the call, it disconnects. Similarly, if you want to make a call (through any of the several methods), a dialogue box appears momentarily showing the call, then another dialogue box appears saying "Try Again".
Any suggestions?

FaceTime Troubleshooting
IOS
FaceTime Troubleshooting
FaceTime Troubleshooting (2)
FaceTime Troubleshooting (3)
FaceTime Troubleshooting (4)
FaceTime Troubleshooting (5)

Phone not making phone calls

I can receive calls but cannot make them. Airplane mode is off. Please help! Thank you.

At this time there are outages on the AT&T network. The network team is working to get this resolved as soon as possible.

Charged £1.50 for not making calls... but we are!

Hello, we have been with BT for about 3 months. We paid for 12 months of line rental and have a unlimited phone/10GB broadband package.
We have been chaged every single month for not making the minimum number of calls per month, however we are making a couple of calls each week and one month in paticular we made quite alot as a family member was in hospital. We started to record the calls but gave up at about 10 because it was inconvinient.
The customer service people (whom we are calling from this phone we are not making any calls from!) repeatedly tell us over and over that we are not making calls... but we are!
Does anyone know what is happening here?
Solved!
Go to Solution.

If your calls are being billed to the wrong company, try prefixing your calling number with 1280, that will ensure that the call gets routed via BT. Then see if the calls appear on your bill.
If they do, then somehow your calls are still being billed to TalkTalk, and you may have a nasty surprise when they bill you.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Why is my backlight display lit for only 5 seconds while making a call (Brightside phone)

When I go to settings, I see that it is set for 2 minutes and indeed it does stay lit for that amount of time if I am not making a call, but as soon as I dial a phone number and especially when I get into an automated menu system where I need to press 1 to get to a different menu and then other numbers to finally get to talk to someone, the display goes black. I have tried swiping the screen which does not help. The only thing that I can do is press the curly arrow that points to the left to have the display light come back on for another 4 seconds, then press the button called keypad and hurry and press a number to continue with the menu system.
I talked with Verizon and was told can do a complete reset, but I don't want to lose my contacts. I went to backup assistant online but keep getting the arrows that go around and around forever and won't let me see if they are backed up. I want to view my contacts online and I want to print them. What's wrong with that site?
I will say this. Do not buy the Brightside phone. It is not a smart phone. It's a touch phone and when you touch anything, things come on like the camera or makes calls to my favorite contacts. sheesh! I can't wait until our contract with Verizon is over with.

I just bought the phone yesterday and have noticed the same issue. The verizon guy i just spoke to said that needed to be fixed, so he transferred me to Samsung tech support. I'm waiting for them to pick up . . .
Okay, spoke to a very nice person who concluded that this was not an option that could be adjusted. The light apparently stays on for about 6 secs.
I was hoping it could be changed, so that's disappointing, but the reason it goes dark makes a lot of sense: it keeps you from hitting buttons accidentally while you're on the phone, so you can hold the phone in your hand, to your ear, etc. without worrying about activating something unintentionally. Also saves battery.
Hope this was helpful.

HI I have an Iphone 3GS and the microphone jack works when I play music but not when making phone calls. please help as I use it for conference calls

Hi I use my phone for conference calls and use the microphone jack to connect to speakers. It doesnt work when making phone calls but when i play music on the phone the jack works with the external speaker.

Happy to have been of help. Hope all goes smoothly.
BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
https://discussions.apple.com/static/apple/tutorial/mark.html
and
https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards.

HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'

Hi, All
the system is PI 7.0 EHP1 oraclei Win2003 server, I configured SLD but I run RZ70, having error "RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA' ". I know there are lot of tread about this error, but none of themsolve my problem. all JCO, RFC connections and SDL DATA supplier(VA) seem OK. error message in SM21 is "Could not send SLD data"
detail from SM21
The system could not send the data that has been collected automatical
for the System Landscape Directory (SLD). Check whether the gateway
configured in transaction RZ70 has been started and whether the SLD
bridge has been registered with this gateway.
You can use transaction SM59 to check this in the sending system for t
implemented RFC destinations. The RFC destinations have the standard
names "SLD_UC" for Unicode sending systems and "SLD_NUC" for non-Unico
sending systems. If a different RFC destination has been entered in
RZ70, check this destination instead.
You can use the Gateway Monitor to check the target gateways. In ABAP
systems, this monitor is started with transaction SMGW, or you can use
the external SAP program "gwmon". Check whether the specified gateway
has an active registration.
OF COURSE I checked RFC of SLD_UC and SMGW
any different ideas
Regards
ABH

Hi
Please check the following notes are implemented
Note 906454
Note 907729
You may be aware but if you are not --->RZ70 creates the required SLD* RFCs during runtime - therefore if you have defined these RFCs manually first using the same namespace you can get RFC conflicts which result in a failed submission
Please also check the user in the RFC is known to both systems and has required authorization to write to SLD
Generally with SLD you have to install or select a suitable gateway to handle incoming data supply traffic
Also the gateway you are using has be known to SLD and reflected in RZ70 - i.e these defintions have to be the same
It is also recommended to delete all references to SLD_* RFCs in data supplier and target SLD
after a failed submission attempt to allow RZ70 to recreate these consistently once the above has been checked
Best wishes
Stuart

500 INternal server error on making ajax call to method of Application page

HI
I have a application page that have a method in code behond ..i need to call this method on usercontrol using jquey on client side..when i ma makeing the call to method using $.Ajax({definiotion});
then it gives me error 500 internal server error and this is coming only with the case when i am passing parameter to method usig javascript var object
help me out on this... if required i wll upload the code also..
regards
Piyush
piyush mishra

This forum is for customization and programming of Microsoft Project - the project management scheduling product.
A quick search turned up:
https://forum.jquery.com/
I'd try there.

TS4185 Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there?

Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there? When called by the Imac (newest), the "accept" or "reject" radio button appears for me to click and connect. On my wife's Ipad the two radio buttons always appear when a call actiivates Facetime and comes on?
There is nothing I can find in "Preferences" in Facetime to turn that on or off. I suspect it has to do with having a more current operating system; that the "controls" are in the operating system? [I'm guessing] It's frustrating getting Facebook calls from several friends on Ipads! Any ideas...VFP

I suspect it has to do with not having a more current operating system
Exactly, what Apple is doing is leveraging new features only on newer OS X versions to force you to upgrade OS X to 10.7 or later.
What they don't tell you is 10.7 or later will NOT run your PowerPC based software, some of it you can't get Intel versions like for perfectly working printers, scanners and games etc. So it can be a very expensive OS X upgrade to 10.7 or later with third party software.
http://roaringapps.com/apps:table
Also they don't tell you is the risk in bricking your machine if the update goes badly, so you have to have AppleCare in case that occurs so it's on them to fix it. Else your paying money to replace the logicboard or buying a new machine prematurely.
A four year old machine can't have AppleCare, it's only good for 3 years from date of purchase new.
Your machine came with a boot hard drive, it's usually got about 4-5 years of life on it, then it needs to be replaced.
Also they don't tell you the newer OS X version has more abilities and features that causes your machine to slow down in performance, especially on older machines.
Also they implement new, idotic and extremely fustrating new user interface features in a arbitrary "you take it or leave it" manner with little or no fall back method.
So upgrading OS X is a gamble on older machines that otherwise would likely work perfectly fine for the next 5 years if one didn't need to have to mess with it.
Since Snow Leopard has slightly over 25% OS X version market share, your still good for security updates etc for the next few years if you just want to stay where your at and be happy.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
The Lions are, well, not so welcome due to Scott Forstall retard UI issues, OS X Mavericks 10.9 is likely going to fix things a bit better.
But basically what is occuring is Apple is trying to force a faster hardware upgrade cycle with the more expensive products by leveraging features on the smaller devices that expire sooner.
Apple is a hardware company that leverages whatever it can to get you to buy more hardware, it's why they are as rich as they are.

Iphone 4 the mike does not work when making a call. it does work with speaker phone and face time

Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

When receiving or making a call ,the other side is not hearing me . all other function is OK

When receiving or making a call ,the other side is not hearing me . all other function is OK.How can i get the phone ok.

Hello,
Thank you for contacting Mozilla.
I understand that you are having problems with placing calls and that the other part is unable to hear you properly. In order to better understand and investigate on the issue that you are encountering, please reply to this message with the following information:
* What is the OS version found in the Device Information page? Please visit [http://mzl.la/Gzz6Kp this link] if you need help finding the Build ID of your phone.
* Please provide the exact steps to reprodcuce the issue you are encountering.
* Who is your current cell phone carrier?
* How often do you encounter this issue?
Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we will have all the information needed to investigate into this. Thank you for your help and we look forward to hearing from you!

HT5622 i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading

i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading.
<Phone Number Edited by Host>

You aren't addressing anyone from Apple here. This is a user forum.
You might want to call a neaby Apple store to see if they have a free class you could attend.

Flex not making server calls

Similar Messages

Maybe you are looking for