GEFORCE GTX 570 TWIN FROZR ll/OC GRAPHIC CARD NOT WORKING SERIAL NO::602-V255-01
I'M FRM INDIA I PURCHASED THE CARD ON 25-05-2011 THE CARD COMES WITH THREE YEARS WARRANTY AND FROM YESTERDAY THE CARD STOPS WORKING AND WHEN I CONNECT TO DVI OR HDMI PORT THE IS NO SIGNAL BUT THE FAN IN THE CARD IS RUNNING.SO I CONTACTED DIGICARE CHENNIA INDIA FOR RMA (RMA No.RTI-13215043)THEY ASK TO SEND THE CARD I SEND THE CARD AND THEY TOLD ME THAT THERE IS BURNT PCB SO WARRANTY IS NOT APPLICABLE I HAVE PAID IND 25000-/(USD 461.042) FOR THE CARD AND WITH 1 1/2 YEARS THE CARD FAILS I'M USING A GOOD POWER SUPPLY CORSAIR HX 750 WATT MSI BIG BANG XPOWER MAINBOARD. I'M USING MSI FOR MORE THEN 6 YEARS MY FIRST BOARD MSI X48C PLATINUM AND THE BOARD WORKS WELL UNTIL NOW SINCE 1 1/2 YEARS WARRANTY LEFT FOR THE CARD ANY ME I'M NOT A MILLIONAIRE TO SPEND AGAIN 461 DOLLAR TO BUY NEWCARD
>>Please read and comply with the Forum Rules.<<
>>Posting Guide<<
Similar Messages
-
Geforce GTX 570 Twin Frozr III PE/OC and BSOD
Hi,
I have an MSI Geforce GTX 570 Twin Frozr III PE/OC which appears to be causing system instability (graphical corruption upon boot i.e before windows), and BSOD. It typically occurs from a cold boot resulting in BSOD after the Windows logo. This will occur 2-3 times. The system then runs stably.
I have tracked this problem down to this card when running at x16 mode in my primary PCIe slot (slot 2, x16_1) on my motherboard. It does not occur if the card is in slot 5 (x16_2) where it only runs at x8 speed (2.5Gb/s rather than 5Gb/s). This does not occur if I place a borrowed Geforce GTX 260 in the primary PCIe slot (it runs at x16 fine and causes no such system instability).
I have tried out various mobo BIOS updates, checked all my system files, updated (and rolled back) my NVIDIA drivers, and checked my memory for errors with Memtest 86+. I cannot find any updates to my video card BIOS.
Can I assume the card is faulty, or does anyone have any other possible solutions?
Spec is:
Windows 7 64-bit
Intel I5-2500K
Asus P8Z68V-Gen 3 mobo
8Gb Corsair DDR3 1800 mem
MSI Geforce GTX Twin Frozr III PE/OC
Cheers!Quote
Its a Corsair 750TX V2 (750 watt). I am also running 1 SSD, 2 hard drives and a blue-ray optical drive. You don't think its too much for the PSU do you?
The PSU its plenty enough
Quote
No I haven't tried it on another computer and I don't think its very likely I'll get the chance.
there is not much options then, except to RMA the card and to hope the problem to be there.
[else the problem will remain] -
GTX 570 Twin FrozR II cold boot noise
I got a MSI GeForce GTX 570 Twin FrozR II OC graphics card. Recently I noticed that one of the fans is making a rattling noise on cold boots. The noise lasts for about 30-40 seconds and then goes away.
The card is just under 3 months old. Should I RMA it? Does MSI do Advanced RMA?you can do query with msi about it here:
http://support.msi.com/ -
My Geforce GTX 760 Twin Frozr is running at 3000RPM constantly. Please Help!
Hello, for some reason my new MSI GeForce GTX 760 2GB Twin Frozr Gaming Edition graphics card keeps running at 100% (3000 RPM) and for some reason I cant change it. When I hook it up to the PSU outside of the case its so quiet which is what I need, but as soon as I put it in the PCIE slot it gets really loud. I'm not even doing anything on my pc and it will still be loud. This is my first build and I dont know much about computers please help me. Thank you.
My motherboard is Asus B85-PlusQuote from: Svet on 10-December-13, 22:44:37
install VGA drivers from msi web for your card, then test again
http://www.msi.com/product/vga/N760-TF-2GD5-OC.html#download
Unfortunately its still not working -
MSI GeForce GTX 560Ti "Twin Frozr II" crash at 50 degrees Celsius
I get artifacts (pink squares all over screen) in heaven benchmark, fluid benchmark and gta 4, a few seconds later I get a black screen and then an error message there windows tell me the driver has crash but praise msi it was successfully recovered. All this then the card is nearing 50 degrees Celsius.
I have:
MSI GeForce GTX 560Ti "Twin Frozr II", (BIOS: 70.24.0a.00.00)
Gigabyte GA-890GPA-UD3H, Socket-AM3
AMD Phenom II X4 965 Black Edition
Corsair Powersupply 650W Black,ATX/EPS
Corsair XMS3 DDR3 1600MHz 4GB CL9
Windows 7 64bit (with sp1)
DC OUTPUT +3.3V +5V +12V -12V +5Vsb
MAX LOAD 24A 30A 52A 0.8A 3A
I tested driver on msi site and the latest nvidia driver, even tested some beta driver. All give the same result as stated above. I also tested to set the clocks at reference speed but no go. Also tested voltage at 1025.Got a new card today, same card but new.
No problems now, seem the new card has newer bios and lower core voltage. Maybe that is a way to fix it, just upgrade bios. -
MSI GeForce GTX 770 Twin Frozr - 4GB noicey fan
Hey.
I have more or less just gotten me a MSI GeForce GTX 770 Twin Frozr - 4GB but i have found that when the fans hit around 60% PWM then one of them is starting to make alot of noice like its a old uesed fan.
do any one know what this comes by and maybe how to fix it..
i did contact the shop where i did buy it and they told me it had to be send to germany to be checked... taking that it might take up to 20 working days and do to im uesing my computer to work from then its hard to just take the card out and sit back waiting to what will happen and have no income the next 20 days ....
What To DO..Welcome to world where products are not good enought tested before sell.
I had problem with one not working fan in msi 270x and i wait 2nd week to pay mine money back. -
MSI Geforce GTX 580 Twin Frozr II Reference?
Hey I gotta few quick questions. Thanks
Is the MSI Geforce GTX 580 Twin Frozr II a reference design PCB underneath the cooler?
And do the military class components get in the way of other custom cooler E.g. A waterblock?Quote
Is the MSI Geforce GTX 580 Twin Frozr II a reference design PCB underneath the cooler?
yes it is
Quote
And do the military class components get in the way of other custom cooler E.g. A waterblock?
You can check Hydrogen version: http://msi.com/product/vga/N580GTX-HydroGen-OC.html -
UEFI / GOP Request - MSI Geforce GTX 760 twin frozr gaming (OC edition)
Hi, see below for my card details.
Current Bios - 80.04.BF.00.30 (P2004-0010)
Serial number - 602-V284-260B1309018695
MSI GeForce GTX 760 TWIN FROZR OC Gaming Edition 2048MB GDDR5
Thanks in advance.There you go: https://forum-en.msi.com/index.php?action=dlattach;topic=173335.0;attach=12043
-
The fan on my GTX 570 Twin Frozr II OC is locked in between 40%-85%. I would like to have the full range of 30%-100%. I believe I have the latest bios. I don't want to have follow the process listed by msi for updating my bios, which involves downloading one program so you can configure something so you can use another program......
EVGA has a simple executable file which unlocks the fan speeds. Does MSI have something similar?Quote from: dieukroman on 13-March-11, 21:56:02
i can feel it , i pass my finger near the fan
then it could be your illusion/imagination...
what hapends if you force/apply max FAN speed from AB?
Does the FAN2 will speed up or keep the same state?
And FAN1 will speedup too?
Apply max FAN RPM from AB, then observe and compare both FAN's again -
GTX 570 Twin Frozr III POWER Edition
Hey guys,
i just got the GTX 570 Twin Frozr III POWER Edition and i love the card but it seems to run quite loud at fan speed above 48% so i made a custom fan control in afterburner
and the card runs at 71C - 75C under full load in games(crysis2, witcher 2), are those temperatures too high? if not what is the max safe temp i should be running at?
thank you =]Quote from: Henry on 31-July-11, 05:13:04
Those temps are normal under a heavy load, nothing at all to worry about.
some people said i can lower the fan speed and just let the card run at 80C, so my last question is:
Is 80C under load an acceptable temperature to run this card at for let's say 4 non-stop gaming hours a day?
and thanks for reply ^^ -
MSI GTX 570 Twin Frozr III POWER Edition OC - Dual monitors IDLE higher temp
I have MSI GTX 570 Twin Frozr III POWER Edition OC, when I attached second monitor to this card temperature in IDLE mode on this card goes higher from ~38C with one monitor to around ~45-6C with second.
Card with attached two monitors do not goes in 2D mode, I readed its a nvidia bug and I should upgdate my BIOS.
In desktop IDLE mode card with attached one monitor
http://img401.imageshack.us/img401/3726/19936167.gif
In desktop IDLE mode card with attached two monitors
http://img851.imageshack.us/img851/1857/27227099.gif
My BIOS version 70.10.27.00.01
Is it available any newer bios for this card ?Quote from: PeterMac on 10-May-12, 01:13:08
From 50MHz on GPU at idle desktop with single monitor to 770MHz!! with two monitors for what ?
to support the second monitor it seems.
read the link
http://nvidia.custhelp.com/app/answers/detail/a_id/2483 -
GTX 570 Twin frozr II driver crash
Hello When i play dx 11 games my driver says "Display driver stopped responding and has recoverd" it happens really frequently, it have done it since i re installed my OS i got a GTX 570 twin frozr II and i run driver 285.38(beta driver for bf3) also tried the one below it nothing helps it still crash.
Thanks you!Quote from: Xerion on 30-September-11, 01:37:47
Hi svet, i played Crysis 2, i completet crysis 2 dx 10 everything max 2 weeks ago no crash, but when i play World of warcraft dx 11 it crash i think that is odd because World of warcraft take less GPU power than Crysis 2..
Yep, looks to be other reason like game specified problem..
try latest patch for this game, reintall the game, try different vga drivers.
or contact blizzard support if nothing helps -
Unstable GTX 570 Twin Frozr III OC
My brand new MSI GTX 570 Twin Frozr III OC is unstable. When under load suddenly the sound hangs and the GTX shuts down for a second and the screen goes black. After this it works again. Some games can handle this, but with others I'm back @ desktop.
My rig:
- Intel i7 2600K
- Asrock P67 Pro3 B3
- Corsair Vengeance 2 x 4GB
- Cooler Master Powersupply Realpower Pro 700W Modular
I'm running Windows 7 Ultimate (64bit)
Is this problem due to the known stability issues and should I have a VBIOS update? If so which one, because GTX570 Twin Frozr III OC isn't on your BIOS update list.Back again...
Today I installed a new PSU (Corsair GS700 single rail with 56 A over +12V) and started playing Bioshock 2 because the error used to occur the most often playing that game.
I played half an hour feeling more and more relieved when suddenly..... same sh*t happened.
Windows crash report had the following to say:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Bioshock2.exe
Application Version: 1.0.0.1
Application Timestamp: 4d9fc504
Fault Module Name: Bioshock2.exe
Fault Module Version: 1.0.0.1
Fault Module Timestamp: 4d9fc504
Exception Code: c0000005
Exception Offset: 003ed2eb
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1043
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
I think we can rule out that it's a PSU problem. My mobo, processor and RAM are also new so maybe the problem is not the card. I already tested the RAM with memtest with no errors.
I will try to find another PC to test the card in. Can I do something else to maybe test the motherboard or processor? -
TS4317 graphics cards not work
video file is not working graphics card not working is their is any software that i can update. or tell me why its not working
If you can see an image on your screen then your graphics card (Intel HD Graphics 3000) integrated into your 13" machine is working just fine.
I'm not sure what you mean when you say that a video file isn't working... how exactly isn't it 'working' and what file format is it in?
Clinton -
VBIOS with GOP/UEFI support for Geforce GTX 760 TWIN FROZR
Hi,
please provide a GOP/UEFI VBios for the GTX 760 TWIN FROZR
S/N: 602-V284-300B1309103551
NVFlash report:
NVIDIA Firmware Update Utility (Version 5.165)
Adapter: GeForce GTX 760 (10DE,1187,1462,2847) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
IFR Data Size : 1112 bytes
IFR CRC32 : 8B7DF729
IFR Image Size : 1536 bytes
IFR Image CRC32 : 114B182D
IFR Subsystem ID : 1462-2847
Image Size : 99328 bytes
Version : 80.04.C4.00.30
~CRC32 : 1A372C64
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GK104 Board - 20040010
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 760
Board ID : E115
PCI ID : 10DE-1187
Subsystem ID : 1462-2847
Hierarchy ID : Normal Board
Chip SKU : 225-0
Project : 2004-0010
CDP : N/A
Build Date : 06/04/13
Modification Date : 07/30/13
UEFI Support : No
UEFI Version : N/A
UEFI Variant Id : N/A
UEFI Signer(s) : Unsigned
Sign-On Message : GK104 P2004 SKU 0010 VGA BIOS (HWDIAG)
MSINV284MS.350
ThanksUse the attached vbios.
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.
Maybe you are looking for
-
HELP I need some help choosing the right laptop
Hello there. I am a student and I am looking to buy a Apple laptop. I have around 700GBP to spend, but I do not wish to spend all of that. As I do not use Macs that often I dont think I need the newer Macbooks or the Macbook Pros as I feel that it is
-
Criteria or points to consider while deciding storage locations
Hi buddies, We are implementing SAP in steel industry, can anyone let me know wht is the criteria or points to consider while deciding storage locations and what should be an ideal naming convention for storage locations. Regards, Sachin Narvekar
-
how do I select the device on the mac to backup my ipad - the help query did not indicate how and where to select. My ipad is very slow and has almost no memory left. I would like to wipe it clean.
-
I have a Sattelite A665s6093 1 year old and keep getting a black screen then recovering and giving me this message "display driver Niveda failed and has recovered". This has happened at least a dozen times over the last fewmonths and I imagine it is
-
[Solved] UEFI - Do I have to remake the arch .iso?
Hi I am really struggling getting Arch to install in UEFI mode. I have read https://wiki.archlinux.org/index.php/Un - _Interface - however I still don;t know what i'm doing.... I have Fedora17 installed in UEFI mode already, my partition layout is /d