Geforce4 ti4600 conflicting or something with win2k.

Hi all...just got me brand new K7N2 Delta-ILSR....I got it all plugged in and went to install win2k pro...it gets through the dos portion of the setup with no problem...I'm not installing the raid drivers because my HDD's are not on the raid controller.
It gets done copying and says its goign to reboot to finish the install...it does so...then when it comes back up I get the dos-like progress indicator at the bottom of the screen that says Starting Windows and it goes all the way across and then the screen goes blank and stays that way...
I've tried numerous things and managed to narrow it down to the video card...I put in an old PCI card and it worked fine...I've pulled out all my other cards and extra devices and turned off the on board extras.
Apparently I'm missing some particular bios setting perhaps that makes my video card work properly?
I have the following actually plugged in:
Antec 450 Watt PSU
K7N2 Delta-ILSR
AMD Athlon XP 3000+ (333 version)
Crucial PC3200 512Mb
Visiontek Geforce4 ti4600
Anybody got any bright ideas???

I'm pretty sure I tried that already, along with increasign the voltage to it.

Similar Messages

Problem with Geforce4 Ti4600 AGP4X

well I tried searching the forums but I couldn't find a thread that pertained to my problem :/, so: I have the MSI Geforce4-Ti4600 AGP4X card, but when I use it I see lines running down my monitor. The picture is still there (sometimes), but there are vivid lines of color that run vertically on the screen maybe a centimeter wide. So right now I'm using my GF2 ULTRA, but I was thinking that if I couldn't get any help on here I'd go ahead and return the card on warranty...and by the way could someone explain to me how that works? Thanks for any help.
-Josh

First, make shure you have a good and strong power supply. GeForce 4 tends to draw a lot of power. Adding two 1 GHz CPUs, although Intel P-III, doesn't make the burden easier... I wouldn't go for anything less than 300 W, and preferably 340 W or even more. Also be aware that not all so called 300 W PSU's are equally strong. Chieftec makes good PSU's, I would probably recomend their 340 W for this system, unless you have many hard disks or CD's, in which case I would choose an even more powerful PSU.
If possible, you should also test the graphics card in another computer, just make shure the PSU is strong enough for the GF4.
Best regards
Quote
Originally posted by aeigis
hi there!
Can anyone tell me if anybody had experienced any problem using a Geforce4 ti4600 in 694D Pro2 MS-6321 with dual 1Ghz 133mhz cpu.
I have upgraded from MSI Geforce3 to Asus Geforce4 ti4600 ultra deluxe and during the POST, I see 12 white blocks on the screen and then on the win2k startup there are 12 blue blocks afterwards the system hangup.
I have asked for a Geforce4 replacement and my dealer told me that I have to make sure that MSI is compatible with the new VGA card.
Is this possible? I do not have any problem with my old Geforce 3 which is almost the same as with Geforce4.
Help needed before I put the new board in. ?(
Aeigis

694D Pro2 with Geforce4 ti4600

hi there!
Can anyone tell me if anybody had experienced any problem using a Geforce4 ti4600 in 694D Pro2 MS-6321 with dual 1Ghz 133mhz cpu.
I have upgraded from MSI Geforce3 to Asus Geforce4 ti4600 ultra deluxe and during the POST, I see 12 white blocks on the screen and then on the win2k startup there are 12 blue blocks afterwards the system hangup.
I have asked for a Geforce4 replacement and my dealer told me that I have to make sure that MSI is compatible with the new VGA card.
Is this possible? I do not have any problem with my old Geforce 3 which is almost the same as with Geforce4.
Help needed before I put the new board in. ?(
Aeigis

First, make shure you have a good and strong power supply. GeForce 4 tends to draw a lot of power. Adding two 1 GHz CPUs, although Intel P-III, doesn't make the burden easier... I wouldn't go for anything less than 300 W, and preferably 340 W or even more. Also be aware that not all so called 300 W PSU's are equally strong. Chieftec makes good PSU's, I would probably recomend their 340 W for this system, unless you have many hard disks or CD's, in which case I would choose an even more powerful PSU.
If possible, you should also test the graphics card in another computer, just make shure the PSU is strong enough for the GF4.
Best regards
Quote
Originally posted by aeigis
hi there!
Can anyone tell me if anybody had experienced any problem using a Geforce4 ti4600 in 694D Pro2 MS-6321 with dual 1Ghz 133mhz cpu.
I have upgraded from MSI Geforce3 to Asus Geforce4 ti4600 ultra deluxe and during the POST, I see 12 white blocks on the screen and then on the win2k startup there are 12 blue blocks afterwards the system hangup.
I have asked for a Geforce4 replacement and my dealer told me that I have to make sure that MSI is compatible with the new VGA card.
Is this possible? I do not have any problem with my old Geforce 3 which is almost the same as with Geforce4.
Help needed before I put the new board in. ?(
Aeigis

MSI GeForce4 Ti4600-VT2D8X advice?

MSI GeForce4 Ti4600-TD8X 128MB,
MSI GeForce4 Ti4600-VT2D8X
MSI GeForce 4 Ti4200-VTD8X
What's really the difference?
I'm trying to figure out which of these cards to get.
I'll be using it with 3DSMAX for open gl.
and video input /output for various projects.. I'll need at least 704x 480 resolution at real time playback/capture.
Has anyone tried using this card with these?
3dsmax
Maya
Premiere
Combustion
Avid
Any advice or info would be greatly appreciated
Waqas
[email protected]

Quote
When I just touch the video card a little with the power off (without removing at all), it gets back normal when I restart...
The pins on the monitor cable maybe bent. Can you try another monitor.
Could be something loose somewhere on card maybe? Bad solder somewhere etc. When card warms up it can lose connection.
What are the Power Supplies. Can be the root of alot of problems exp with Gf4 (make and wattage of PSU can be the difference of it working or not)
Bluesky. I'm not familier with grounded AC plug. Does this have three wires, or is it a separate wire???

Problems booting into OS 9.1 after upgrading to Geforce4 Ti4600

Help!
I still use a older g4 mac to work with several older legacy hardware products such as 12x9 Walcom Tablet, Kodak 8650 dye-sub printer, and a Agfa 12x18 2000xl oversized scanner, and a Nikon LS-2000 neg scanner. So, I still use classic for these hardware items in which os x drivers were never created.
I wanted to use two displays for color proofing, the adc 23" studio display and a DVI formac display. So I needed to upgrade my Geforce2 MX to Geforce4 Ti4600.
It boots fine into OS X however it freezes when booting into os 9.1.
I cannot find any information on the extentions needed for OS 9.1. I am using Nvida drivers 1.1.1 from June 2001. I think this is the source of the problem.
What drivers do I need for the computer to boot?
Adrian

Thank you for the reply, but that link does not work. Is this an os 9.1 issue were the drivers do not exist and I have to upgrade to 9.2.2 or is this an updated drivers issue?
Adrian t

K7N2G-LISR & VisionTek Geforce4 TI4600

Greetings all.
I'm havin' a problem with FPS in games. The video skips pretty badly. It seems to skip about 5 frames every second.
Specs & Settings:
Proc: AMD XP2000+
-FSB 133
Mobo: k7n2g-LISR
-Bios: v1.2
-8x AGP disabled
RAM: Kingston 1024 megs PC3200 DDR
Video: VisionTek GeForce4 Ti4600 (4x version)
-nVidia v43.45 Detonator drivers
OpSys: Windows 2000 Pro (also used Windows XP SP1)
-Service Pack 3 installed
-All windows updates installed

Where would one turn that off? I checked both in the game and in display properties.
Edit - NM found it. nVidia hid it. That didn't work either.

GeForce4 Ti4600 HELP PLZ!!!

Hello all, I have a P4 1.9, Motherboard intel D850MV, 512MB Rambus memory, sb live 5.1, and now i try to install a GeForce4 Ti4600. Whem I start the computer and try to get in in bios setup for exemple, it just turno off the monitor, whem start appear the Intem Pentium 4 logo, after that whem the windows gonna start the monitor just turn off, like on the sleep mode. So i put the card on my brother computer, is a P4 1.4, motherboard intel D850DB, 256MB rambus memory and work perfect. So I ask for the teachers ehehe.. what is the problem? I really think that is the motherboard. :(

Quote
Originally posted by isidro
Hi, i dont know that have a 4pin with 12v on the psu, so i connect that on motherboard and its look that work normally...
You have a 1.9GHz P4. This processor draws more power than was originally planned for ATX 2.0 power supply units (PSUs). Thus, P4-compatible power supplies have been augmented with an additional 12V connector to supply additional current to the motherboard (which then divides and regulates it down to what the processor and other board components expect). Thus, the board/processor/RAM combination generally isn't receiving adequate power to operate when the additional 4-pin connector is not connected.
Quote
and whem i put over that 4pin dont work. Like without the 4pin dont get in on BIOS, and with that get in on BIOS what you think?
Yup. When the extra connector is disconnected, inadequate power is provided and the board does not operate. When it is connected, there is adequate power.
Note that it is still possible to have a too tiny power supply and too power-hungry components. In fact, your particular set of hardware is rather power-hungry. Even if you don't have immediate power trouble, as the power supply ( and other components ) age(s), you may find that the machine is unstable when it is either cold or hot. Eventually this will worsen until either it only works after it's been off for a while or it only works after it's been on for a while.
Thus, although you aren't experiencing power supply trouble currently, it would be wise to watch for the symptoms I've mentioned and then take corrective power supply action if you observe them.
-- Eric Towers ! [email protected]

Major GeForce4:ti4600 problem

Hey everyone, I just bought the MSI Geforce4:ti4600 "champion Edition" video card and i have a huge problem. I uninstalled the drivers from the old video card i was using. and shutdown to install the new card. i installed it and boot up. when i got to the windows 2k screen i get alot of nasty artifact blocks with static going through some of them. i've read through a few threads about this problem but no one seemed to know the answer to the problem.
after i installed the drivers i figured it would be fine after that. was i wrong. it still gave me the same nasty blocks everywhere and it would not even go past the windows 2k start up screen. it would just give me a blue screen of death very quickly and restart. i looked in the BIOS to see if everything was fine and it was. here are my system specs: Abit KG7 mobo
AMD Athlon XP2000+
256mb 2100DDR micron ram
sound blaster x-gamer 5.1
10/100tb nic
windows 2k sp4
350W PSU
+3.3V 14A
+5V
+12V
+5VSB
hope you guys can help, thanks!

Well i just bought a new PSU for my PC and I'm still having the same problems with the video card. X( I think it's time to call MSI for an RMA. this sucks. i was hoping i would not have to do that. now i have to wait til after i move out next week to replace the card. this is my first time upgrading my vid card in over 2 years and i end up with a lemon. :(
well here are the new PSU specs.
3.3v= 28A---\_____220W
5v= 30A-----/
12v= 15A

Satellite Pro 4600 Wireless card does not work with WIN2K ?

I have a Satellite Pro 4600 with UK dealer installed PA3070U-1MPC wireless card running with Windows 2000
The wireless client manager finds the network of my wireless router and reports the signal is excellent and I see all green bars swhowing.
However I can't mske a connection, in 'connections' the wireless one says 'network cable is disconnected'
the router works ok with other laptops in my house.
I have latest version of Win2K also have downloaded and installed latest versions of client manager and WLAN card driver for win2k from toshiba website.
The 'toshiba support in Turkey' told me 'I need a different driver for Win2K for my wireless card cause the win2K driver on the toshiba website is not for 'this' wireless card'. I have waited for this for 3 weeks now and have been unable to reach the elusive UK Level 3 support who supposedly have this driver. I have seen on the internet the same wireless card is has been sold as a 'made by toshiba' accessory and it says it is compatible with Wim2K
What do I do next please ? Does this run at all with Win2K , is there 'another driver' and so on ?
Thanks

hello
please be more scpecific - what do you mean by 'disconnect the LAN' - I have nothing conneced there anyway ? do you mean 'disable' the LAN even though there is nothing plugged in ? can you please post the exact sequence of this so I can try ir too.
In the meantime my laptop has been to Toshiba for them to sort out at their highest level UK support base. I was hoping my troubles would be over - but no, read below what happened. They are basically saying my win2k is not in order but I had just installed and updated it so right now I haven't a clue what to do next.
START QUOTE of Toshiba Support response:
Sat Pro 4600
Serial No: 31474181G
Windows 2000 SP4 (customers build not recovery CD)
BIOS V1.80 not current therefore updated to V2.60
The notebooks wireless card is functional and has the correct driver installed, it also has the correct and latest version of the Wireless Client Manager. The wireless function appears to see the router but will not connect and obtain an IP address. Irrespective of the settings applied within Internet Explorer or the Wireless client manager you cannot obtain a connection. The customer did not have any Toshiba utilities installed such as, Power Saver, Common Modules, Chipset drivers, network device switch, I therefore installed these missing components and updated the BIOS to the most current revision. However despite this the unit will still not connect to the wireless.
I therefore removed the customers HDD and replaced his HDD with a Toshiba loan HDD with a fresh build that I had created. When using the machine with this build the wireless connected without issue and I was able to browse the internet etc. I placed the customers HDD into our machine and the problem with the wireless was replicated on our machine here, therefore the problem is not with the wireless card or any hardware aspect of the machine, the problem lies with the customer's build of Win 2000. I examined for anything obvious but could not find anything, therefore I'm sending this machine back to customer with the advice that his build needs addressing or he needs to reload Win 2000 his machine.
As you can see from the above comments, the machine performs as per specification with loan HDD and fresh build of Win 2000 installed, the problem is only present with you HDD and build in the machine. In addition to this I have replaced the missing screws on the base of the machine ensuring the machine is structure is maintained.
5 x B16 Screws
1 x B6 Screw
1 x Memory Cover Screw
END QUOTE

I have photoshop CC. I cannot open two files such as Tiffs and view them side by side. When I open the second file it overrides the first. Do I need to do something with preferences?

I have photoshop CC. I cannot open two files such as Tiffs and view them side by side. When I open the second file it overrides the first. Do I need to do something with preferences?

What happens when you try to use the clone stamp tool?
It should work with the images side by side.
You can setup photoshop cc to be like photoshop cs2 was on your other mac, by going to Photoshop>Preferences>Interface and unchecking
Open Documents as Tabs and Enable Floating Document Window Docking
And also going to Window and unchecking Application Frame

How can I find my apple ID name? I changed it to something with a typo and now I cannot log in.

I changed the email account from an old email address to a new email address about a month ago. I couldn't log back into the account, and when I tried to retrive the password (which I did not change) the website said that no apple ID existed under either the old email or the new email.
I then made a second apple ID to be able to talk to customer support. This is my second, empty, worthless ID with no purchases in it, not the one I'm trying to recover. I emailed apple support and, after a month of her giving me directions on how to change my second, worthless ID around to the username I wanted, I sent her some screen shots showing that this account was empty and NOT the one I wanted help getting back into or changing. When she fininally understood the problem, she told me to call apple, who told me to email her. So now I'm here.
Have I lost every thing I've bought? Every single app, song, and season pass? I mean, all I did was change the email address to something with a typo.

The following article(s) may help you.
Look up your old and forgotten Apple ID

I have a £50 gift voucher and I tried to buy something with it, but it tells me there was a billing problem with a previous purchase and makes me put in my debit card details. My debit card has no money atm, can't I just pay with my voucher?

I have a £50 gift voucher and I tried to buy something with it, but it tells me there was a billing problem with a previous purchase and makes me put in my debit card details. My debit card has no money atm, can't I just pay with my voucher for the things that have a billing problem? I tried to put my voucher code in again but it won't let me do that.

If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account.

Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there

Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there...Apple...PLEASE update and give us back the old version of iTunes...

Pull down View > Show Sidebar. This will give you back the same functionality of iTunes 10.x.x.

What do I do with the Beta 10.9.3 program I've been using these past several weeks, now that 10.9.3 is out and downloaded.......I still have 'feedback assistant' in my dock........are there files I need to do something with ??? thanx

What do I do with the Beta 10.9.3 program I've been using these past several weeks, now that 10.9.3 is out and downloaded.......I still have 'feedback assistant' in my dock........are there files I need to do something with ??? thanx..............75 yrs old and still swimmin' upstream.........

from : OS X Beta Seed Program FAQ
How do I get a shipping version of OS X back on my Mac?
To get a shipping release of OS X on your Mac, you can simply install the final version of the software you are testing when it appears in Software Update.
How do I leave the OS X Beta Seed Program?
To leave the program, visit the Leave Program page and follow the instructions to remove your Apple ID and your computers from the OS X Beta Seed Program. This will stop pre-release updates from appearing in the Mac App Store on your computers.
You only need to do more than you already have, if you'd rather not see future pre-release updates.

My MacBook Pro changed to windows could it be something with the bootcamp

I was on my cousins MacBook Pro and it died on me so I was gone for a few hours and came back and charged it and turned it on and it was in windows softwear what do I do? Could it be something with my bootcamp because i called apple and the guy told me it might be my bootcamp? PLEASE HELP my cousin comes home in a week!!! PLEASE HELP ME!!!!!!

Soour cousin has Windows, fine.
Use Option at first restart and select Mac OS
x also will boot os x
Then use the Startup Disk to reset the default
Must have reset pram y

Geforce4 ti4600 conflicting or something with win2k.

Similar Messages

Maybe you are looking for