GI against cost center for consignment materials using BAPI_GOODSMVT_CREATE

Hi ALL,
Can anyone help me what are the necessary fields i need to pass in the BAPI_GOODSMVT_CREATE for issuing goodsagainst cost center from consignment bucket. I passed SPEC_STOCK as 'K' in the debugg mode for consigment materials but it didn't work. Can anyone give me some clue . Any pointer from any side will be highly appreciate.
Thanks in Advance,
Regards
Azizur
Edited by: Azizur Rahaman on Oct 23, 2009 4:54 PM

Hello
As far as i understand are you passing the parameter SPEC_STOCK and STCK_TYPE int the table line items...?
Regards,
Nabheet

Similar Messages

Direct GRN (non order items) to cost center for Non Stackable Materials

Hi All,
We can do direct GRN (non order items) to cost center for Non Stackable Materials.
If it is possible.Please advice me
Thanks In adance

Hi,
Your question is not clear.
Ok.
If you want to issue goods to cost center you can use 201 movement type.
If you want do create automatic PO in back ground during goods receipt, you can do it with customization. For automatic PO creation during goods receipt, you can search in SDN, you can get the answer.
Regards,
Biju K

Consumables against cost center

consumables against cost center report

IN mb21 creating reservation for consumables for work center and issuing from stores
in creating reservation giving inputs cost cente and movement type, materials, quantity, storagelocation
now i want what are the materials issued against that cost center.
thanku
ravi

How to maintain One product cost collector for multiple materials and configuration setting

Hi experts,
my requirement is that i want to maintain one product cost collector for multiple materials ans also i want to know the configuration setting for the same.
I have used KKF6N but it is not working in my case. I went through KKF6M also but there i found multiple cost collectors.
please guide me in the same.
Thanks in advance.

Hi Shripad,
you cannot assign same Product cost collector to different material.
Because you creating cost collector for material combination of material /production version,material /Bom Routing.
so please create individual cost collector for every material.
if you have any query kindly revert back.
Please mark the answer as helpful if it is helpful to you.
Because march 5 onwards scn has stopped awarding points to liked content.
Starting now: No more points for likes on comments/replies
Thanks & Regards
Sandeep Kumar Praharaj

Problem with Free of Charge Sale Returns against Cost Center

Dear All,
The problem is related to Free Sales which is as follows -
I have issued free of charge against Cost Center & now I want to know whether any process is there or configurations can be done to return the free of charge issued goods along with the cost center. As in the order in header level while doing return the cost center is not getting reflected.Again in the outbound delivery creation mode also at the item detail level under the "Financial Processing" tab the cost center field is present but it is greyed out/ inactive.
Please suggest what are the configurations needed to create returns of the Free Of Charge goods against Cost Center.
Looking forward to early replies.
Thanks & Regards
Priyanka Mitra

Hello Mr. Lakshmipathi,
First of all thanks for your help.As per your suggestion I have maintained the Cost Center against the Order Reason in OVF3 and it is getting reflected in the Sales Order but whenever I am keeping the field of Cost Center blank in OVF3 the "Cost Center " is remaining inactive & not even displayed in Sales Order.Instead the system is asking for WBS element.
Now I want to know is there any configuration possible so that the Cost Center field will be reflected in either Sales or Delivery Order as blank space & not greyed out which will be filled up manually.
Plesae suggest.
Thanks & Regards
Priyanka Mitra

Control G/L account and Cost Center for movement type 251

Dear Friends,
I would like to use mov. type 251 for GI for sale and like to control over G/L account and Cost center.
The G/L account is by default from the valuation class of the the material and if the user will enter wrong G/L
we had done the customising in OMJJ movement type 251 - Account grouping - Unchecked the check box of column
"Check account assignment" - Impact is " the system always uses the G/L accounts or account assignments determined automatically"
I also made default cost center for G/L account and plant wise through OKB9.
Now I would like to suppress/dispaly the G/L account and cost center - for same I had done Setting in Entry control menu of OMJJ for 251 of field Account control - Value - "-" field is suppressed. But it is not working.
Please advise to solve this situation.
Thanks & Regards
Rajan

Dear Rajan
Yes, I have checked in MB1A earlier. We have separate node for Field seletion layout for Enjoy transaction MIGO for mvt type in which the G/L account (KONTO) an Cost center (KOSTL) have only optional or required entry selection.
warm regards
Ramakrishna.

Cost center for Production Order

Hi all,
We are now not able to get a report of Material consumption cost, Cost center wise. It is Because cost center is not linked to Production order or not linked to material issued to production order. Can we get the cost of material cosumption for production order cost center wise. Please give us a solution.
With Regards,
R.Mahendiran.

Hi,
Prod order is linked with controlling, for the direct costs like material cost linked with accounting view, costing view and secondary costs are linked with costing tab in work center and inturn workcenter is assigned to cost center, and for the prod order controlling part you will be assigned to the costing variant in transaction OPL8, if you remove this you can't get any reports.
To understand the difference
201 - Goods issue against cost center. Means you create reservation through MB21 and do posting of cost directly at cost center.
261 - Goods issue to Production order. Means you create a reservation through Production order and do posting of cost to Production order. When cost settlement of production order is done cost from production order will get transfered to cost center mentioned in settlement rule of production order.
Hope this clarifies your doubt.

Book expenses against Internal Order with reference to PO which is created against Cost Center.

Dear Users,
We have an issue, we created PO against Cost Center and now we want to book its expenses(MIR7) against internal order. So if possible suggest me any solution for this.
Thanks,
Manoj.

Hi
The only other way is to post a manual JV for such a PO where in you debit the expense account with reference to IO and credit the cost center with expense account. Now do the GRN against the PO with reference to Cost Center.
If you cannot modify the PO, unfortunately, this can be the only way out.
Regards
Sanil Bhandari

Best praxis for determining a cost center for an HR org unit in PPM ?

Hello all.
We have defined the HR Org structure directly in PPM backend. Later the intention is that an interface should transfer this data from HR.
The HR orgstructure defined works fine for the staffing process (with "resource manager via responsible organization").
We have however run into some problems with the MLC & costing part. The intention is to use manual MLC linking tasks/phases to PS WBS-elements (task based controlling).
If we leave the org unit field blank in the cProject project project definition we run into the message "No account assignment exists for the project defintion - no costing" and the systems rolls back from the assignment made.
If we however assign an orgunit in the project defintion we instead get the message "No cost center could be determined for org unit 123...".
<u>We therefore need to be able to determine a cost center for the Org Unit assigned to be able to proceed. How is this then best done?</u>
There is a master cost center assigned to the orgunit in HR but not in PPM backend where this option does not seem to be available.
With task based controlling the cost center does not really matter so it could possibly be hardcoded via a BADI (?) but is this really the way this should be done?
Any suggestions?
Thanks / Anders

Hi and thanks for the reply.
We will test with an ALE replicated structure so that the object ID becomes the same in the two systems as soon as possible.
Pending that we will try the BADI option. Here I am however not sure what it is we really expect the BADI to do. Which field should be populated with the cost center (the fields available are mainly project characteristics)?
I also eventually found some information regarding this in the PPM 4.0 help. I enclose info regarding this below.
a) http://help.sap.com/saphelp_ppm400/helpdata/en/index.htm
b) choose Collaboration projects>Accounting Integration>General Information about Accounting integration>Derivation of Organizational data.
As I read this the system derives this as follows in case of task-based or role-based costing with no resource assignment:
1) Look for the two BADIs mentioned to derive the cost center
2) If no result there it looks for an org unit in the cProject header (where I assume having the Org Unit with the same Object ID in backend and ERP enables this option)
3) If no result there the system looks for a "requesting cost center" in the account assignment object (WBS element or internal order)
Regards / Anders

Select cost center for physical inventory difference posting

Hello,
While posting physical inventory differences (transactions MI07 or MI10) the choice of cost center is not offered. A default cost center is used by the system.
Is there a way to choose the cost center for inventory difference postings? This is useful considering we have several inventories managed by several business units with different cost centers.
Kind regards,
Sergei Volkov

this is from OSS note 13423:
Symptom
Key word: Inv acct assign
No account assignment can be entered when posting inventory
discrepancies.
Additional key words
MI07
Cause and prerequisites
This function is not implemented.
Solution
In Customizing an account assignment can be made for every inventory
adjustment account. To do this the inventory adjustment account must
first be defined as a cost element (Transaction KA01 / KA06):
Accounting -> Controlling -> Cost centers -> Master data -> Cost element
-> Create primary / secondary. Then an account assignment can be made
for the cost element (Transaction OKB9):
Tools -> Customizing -> Setup menu -> Accounting -> Controlling -> Cost
centers -> Actual postings -> Automatic account assignment.
If this account assignment is implemented every posting to the
particular inventory adjustment account will automatically receive the
appropriate account assignment.

How to change cost center for employee

Hi,
I want the engineering groups to change to different cost centers for this new year.I was able to change the home cost center for a work center through IR02. But not able to change the home cost center assignment for specific personnel through PA30. SAP allows to enter the cost center but while saving it gives the error message as "Start date after initial entry date (01/01/2010)" when I used a 01/01/2011 start date and "Cost Center does not exist on 01/01/2010" when I used 01/01/2010 start date
Could please tell how to change the cost center for the personnel?
Thanks & Regards,
Jegashree

Hi Jegashree!
The Cost Centre is always assigned in creating Position. So If you want to change Cost Centre, please using T-Code PPOME and find the position and change the Cost Centre.
The another way, you use t-code PP01 (create) PP02 (edit) to change the relationship (IT 1001) and A-011.
Hope you can solve it.
Regards!
Woody.

Procurement against cost center need to do Qulity inspection .

Dear All,
I want to procure material against cost center and also I want to do qulityt inspection for that material after GR.
Regards,
prerna verma .

Hi,
You can very well do the same by maintaining the quality inspection type in QM view of material master & all relevant QM master data.
The inspection lot will be generated after posting of GRN & you can record results for characteristics & post usage decision.
The only thing is that, you will not be able to do stock posting, as the stock is already consumed to assigned cost center.
Alternatively, you can take the material into stock after GRN (not cost center assignment to PO), do Quality inspection & then issue the material stock to the cost center.
Regards,
Prashant Kolhatkar

Report for consignment materials

Hi SAP Gurus,
Is there a report for consignment materials that can show us the opening balance, receipts, Usage, and ending balance (of the stock) for a given time frame?
thanks
Anusha

This doesn't do any good. it just gives the vendor information. I'm not looking for this. I'm looking for a report or a t code which gives what the opening stock levels, receipts of stock, usage of stock and ending balance of stock for consignment materials for a given time period for a plant
thanks
Anusha

Creation of multiple cost center for one emplyee

HI All,
I have requirement . one emplyee is working two projects so need create two cost centers for one employee.
please tell me how create multiple cost center for one employee.
Thanks&Regards
ramesh

hai.
if he works half the time... u can give 50%.. or just get it confirmed from core team member..
manu

How to get the cost center for the retro balance.

Hi All
I have this report that gives the retro balance. I get the information from RT and BAL. The problem is it doesn't show the Cost Center for the retro amounts. C1 holds the current periods payments not the retro ones.
Does any one know how can i get the Cost Center of the the amounts that wage type /552 is showing in the RT?
Please Help!!!

Hi
I am not sure on the requirement. You are developing a FI report and accessing VA03 which is sales transaction. Anyway for getting cost center you can go to table VBAK,VBAP for line items.
Hope solves ur problem
Thiru

GI against cost center for consignment materials using BAPI_GOODSMVT_CREATE

Similar Messages

Maybe you are looking for