Goods issues to Quality inspection

Dear friends,
I have deactivated QM not active(Removed the check ) in IMG/Quality management/QUality inspection/Deactivate movement types for QM for the movement type--103.
So while GR-MIGO-ins.lot is created and QA32--QM people placed in Unrestricted stock.
So through 105 automatically material is placed in Quality inspection.
Requirement is that for Goods issues also Material has to be inspected by QM.
Then I deactivated for movtype-201, Then Qualty inspection lots are created.
But I do 201,material stock is reducing but Quality inspection lot is creating.
But Material shall not be issued,it shall be through QM after relasing only issued to cost center, similar to Goods reciept.
How it can be done,
please suggest.
Regards,
Canand

Hello Anand,
if I understand you correctly you are creating Inspection lots of the 02 inspection origin, and you want these to be stock relevant.
This is not possible only certain inspection lot origins are stock relevant i.e. 01, 04, 05 and 08.
I hope that this puts more light on the issue.
Regards,
Isabelle

Similar Messages

  • SD delivery goods issue of Quality inspection stock

    Hello, anyone know whether SAP allow goods issue of quality inspection stock?
    If stanrdard customizing not possible, any user exit ?

    Hi
    No sap not allows GI for QI stock
    Beacuse Once Stock in QI without inspection we can't issue goods
    Hope ths helps
    Please reward points
    Sunil

  • Goods return without quality inspection

    Dear Friends ,
    I wants to do material return without quality inspection , is it possible , how can we do this.
    Regards,
    Mahesh.

    Hi Mahesh,
    In SAP Business One, there is no quality inspection for goods return. You need to post on a proper forum to get the answer.
    Thanks,
    Gordon

  • Reverse Goods receipt after Quality Inspection...

    Hi Expets,
    I'm able to do the GR reverse  after the Quality inspection Lot also using mb01 and mov type 102.The stcok is also updating as soon as i do the reverse. Here my questions are.......
    1)Why  I need to do the cancel of Inspection Lot since there is no effect on stock postings by cancellation and stock postings are effected by GR only.
    2) GR = 10 qty
        Inspection  Lot  = 5 Unrestricted, and for remaining UD for 5 has not been made.
    here I'm able to do the reversal of GR  for 10 Qty and I did also. and same time I,M  not able to do the cancellation of Lot because the qty 5 is still pending, for this If i post the qty 5 to un restricted in the Lot  and do the cancellation  lot , the stock will be duplicated in mmbe. kindly guide me how to handle this type of issue....
    where reversal of GR for full qty before partial Inspection qty for the lot and completing the inspection lot after GR reversal and cancellation of full Lot
    Regards,
    Sri.........

    Hi Manu,
    For wht Z-Tcode and programme has to be developed ?
    Regards,
    Sri......

  • Good receipt in quality inspection

    hi gurus
    i have maintained quality inspcton set up in material master data. now when i do good receipt it is posted in quality inspecton stock. now query after quality inspection how to take stock from quality inspection stock to unrestricted stock .in between this how to do quality usage decision so that rejected material can be returned and  for accepted material invoice cen be posted.if some one have snap shots for usage decision please send it my mail id 
               [email protected]
    points will be rewarded.thnks

    HI,
    Go to QA 32 , you can see the list of inspection lots .
    You can do result recording & Usage decision.
    During usage decision , you can do the stock posting (Unrestricted , returm delivery)  from the stock posting tab in UD screen.
    Ref the link below for more details.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/QMIMUD/QMIMUD.pdf
    Hope this helps you.
    Regards
    K.M.Arun

  • Good Receipt under Quality inspection

    Hello Expert
    Once the good receipt is done it should go to Quality inspection and then to Un restirected.
    I have done certain check mark in Material master under quality management tab, even after it is moving to un restricted at the time of GR.
    Thanks in advance
    Abhi

    I have done certain check mark in Material master under quality management tab
    What settings you have in QM view of material master ?
    If you done inspection setup correctly in material master,it will be reflected only in new purchase order or new line item
    added to existing purchase order not to existing p.o or goods receipt.

  • Issue of Quality Inspection for consignment return delivery

    Hello,
    I am doing a returns delivery(from a Sales Order) from a Customer Consignment.
    I am getting a error when I do a Post Goods Receipt(PGI). QM is active for that material.
    The error I am getting is
    "Change the inspection stock of material XXX in QM only"
    Procedure says
    "Check both the QM inspection setup data and the movement type for material XXX in the quality management view of the material master"
    The movement type used in the returns delivery is 655(GD returns for QI).
    What is the solution for this error. Do I need to change/add new Inspection type based on the Movement type?
    Please let me know ASAP.
    Thanks
    Regards
    SAP Fan..

    Hi,
    You can read this link for inspection for customer return [Inspection for customer return|http://help.sap.com/saphelp_47x200/helpdata/en/92/b808b1d52a11d2962200a0c930e04c/frameset.htm]
    It looks the material master is set-up inspection type with 06 - returns from customer. Also the movement type 655 moves the goods into QI stock.  In this case, the Quality personnel needs to change the inspection stock type using transaction code QA32. They will change the usage decision on the customer returns.
    Once the change the inspection type is changed, you can do the post goods receipt.
    Regards

  • Cancel the quality inspection movement on good receipt

    I am trying to cancel a quality inspection movement from qual. Inspect. to
    unrestricted use.  Here are the details:
    1. A goods receipt was entered for Material XXX  batch YYY for
    1900kg.  It was entered  Aug 1, but was backdated to post on July
    29.
    2. I think  an accident was made and the person
    entered  the good receipt  into quality inspection status, rather than in unrestricted
    use.
    3. this  person  used   the   movement  321 without success .
    4. Now it will not allow me to post goods issue with a back date of Friday
    July 29.
    When i try to reseverse the good recipt i received an error message Deficit of BA Stck.in qual.insp 1.900 KG
    Message no. M7021.
    Can you help me?
    Thanks in advance

    While doing reversing change stock type .

  • Quality inspection in Delivery,Customer Return and Customer info record

    Quality inspection in Delivery and Customer return
    Dear Friends,
    Here is my Question
    For Delivery inspection i am using inspection type 10 meaning when ever there is goods issue during delivery inspection lot is created ,RR and UD post stock to Unrestricted if pass and unblocked stock if fail or rework or change to another customer  and COA is printed if UD is pas
    is my understanding is correct
    For Customer return i maitanin inspection type 06 , Meaning when ever there is customer return , GR is done in IM  and inspection lot is created,RR and UD and post the stock to  unrestricted and Blocked stock if fails
    is my understading is correct in the above scenario
    Also where this Customer info record is used and related with inspection
    From my understanding  Customer info record is used to link sales organization and customer to the material  in Quality inspection
    so that by means of the Quality inspection indicator in Custm info record can control the inspection lot creation before delivery or after delivery and what is customer indicator
    Please can some give me a clear picture of the above , sorry to ask so many questions in one thread
    Thanks & Regards
    Raj

    Dear Raju,
    Let me make you clear
    1) Customer info record stores data related to material / customer. You can decide whether the inspection has to be before delivery, after delivery or at the customer place.
    2)Inspection lot 10 is created when you save the delivery to a particular customer. Inspection 10 doesnt have stock posting tab. If you have selected in Customer info record inspection before delivery then only after you give the ud for the lot it will allow for PGI. You cannot stock posting to any stock as in 01 or 04.
    neither you can change the customer.
    3) For customer return inspection 06 inspection type will not give stock posting tab. It is a stock irrelevant inspection type. You can 05 inspection for the same. it helps in stock posting
    hope this helps
    Regards
    gajesh

  • Stock in quality inspection

    Hi Gurus,
    I am getting an issue in Quality inspection stock.The issue is like this .
    In the last month one inspection lot generated and  without stock posting only UD done.
    The lot quantity was 33.670 , but when I am checking the quality inspection stock in plant stock of the material for
    last period in material master I am getting only 12.360. Difference is coming 21.310. So I am worry about this quantity.
    Please advice .I have attached the screen also
    Regards
    Aravind

    Hi,
    This may not be the exact inspection lot which you have seen for quantity 33.670.  System behaviour as follows:-
    If any inspection lot which is not cleared in previous month say Lot qty is 50 PC in June 2014 and you cleared the inspection lot on current month, then this 50 PC will be there in previous month (June 2014) quality inspection stock.  This is just for information purpose.
    The same way, 12.360 TO is someother inspection lot qty which was created on last month and cleared on this month for the same material and this quantity has been added to current month unrestricted use stock also.
    Check in system that is there any Inspection lot which was cleared on this month with qty 12.360 TO.
    Regards,
    Arvind S

  • GR blocked to Quality inspection

    Dear Experts
    i have made goods reciept by 103 into GR blocked stock. now i want to make goods reciept to quality inspection . which movement type should i use.

    Did you maintain Quality Management view in Material Master??
    If QM View is maintained in Material master then Release GR Blocked Stock using 105 Mov type then Stock will go to Quality Inspection Automatically.
    Further You can do Usage Decission thru QA32....

  • Goods Issue Print

    All,
    1.For MB1A (201 Mvt type ) , how to set the print put while saving ?
    Can anyone help me regarding this .?
    2.Please tell me whether I have to use WA01 or WA03 ?
    3. Wat is the difference between WA01 and WA03 ?
    regards

    Hi
    1. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WA01, WA02 and WA03, set the dispatch time as 4. If it is 4, it is printed immediately on saving MIGO. If it is 3, you have to print it using MB90.
    2.a. WA01 means Tr type WA and version 1: This is used for printing Individual Goods Issue slips i.e. 1 GI slip for each item of the MIGO.
    b. WA02 means Tr type WA and version 2: This is used for printing Individual Goods Issue slips wth Inspection texts if any i.e. 1 GI slip for each item of the MIGO.
    c. WA03 means Tr type WA and version 3: This is used for printing Collective Goods Issue slips i.e. 1 GI slip for all items of the MIGO.
    Hope this clarifies. If it still does not work, pls check the following settings:
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2 for MIGO_GI and MB1A
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Pr indicator for GI docs, for mvt type 201 maintain Print indicator as 1.
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WA01, WA02 and WA03, ensure the foll:
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants and Sto Locations for WA01, WA02 and WA03.
    7. Go to MN21, for Tr Type WA, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing GR doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
    Hope this clarifies.
    Thanks

  • EWM Scrapping after quality inspection

    Hi guys,
    I'm trying to work out a scenario in EWM but I'm not sure how the standard process should work, hopefully you can help.
    I'm receiving a returns shipment in my warehouse. After Goods Receipt, I transfer the goods to my quality inspection area using POSC. Here, I enter the inspection result via /SCWM/QINSP. Depending on the inspection result, the follow-up task is determined.
    The current behaviour is as described below:
    1. If the product is OK, it can be putawayed via the already exising warehouse task.
    2. If the result is not OK, the product needs to be scrapped. Currently, EWM creates a Warehouse Task to my putaway storage type, and assigns stock type S5 (Scrapping from Putaway) to the product. When I confirm this Warehouse Task, the stock is moved to the putaway area and the stock type is changed to S6 (Scrapping from Warehouse).
    Is this correct behaviour? I would actually expect that the scrapped stock would be moved to the scrapping area (storage type 8040), and not to the putaway area...
    Thanks & regards,
    Oliver

    Hi Juergen,
    The Warehouse Process Type for decision "not ok" (Follow-up action D - Scrapping) is 4020 (Scrap).
    The Destination storage type / bin for this whse process type are 8040 / SCRAP-ZONE.
    As far as I can see, this is correct, right?
    Appreciate your help.
    Regards,
    Oliver

  • Quality inspection before goods are issued

    Dear friends,
    We have got requirement that before Goods are issued all materials shall undergo Quality inspection and then materials are issued.
    How to map it in SAP.
    Please suggest
    Regards
    Canand

    Hi,
       you have not made it clear that you want through QM or in the framework of Inventory management.
    for the material in QM, you need to active QM view for that material and define the quality parameters for the material accepatance or rejection.
    if through inventory management, you can select the stock type Quality inspection at the time of PO or Migo.
    Regards
    Rajesh

  • Quality inspection for the items issued for Sales order

    Hi, How to map the qc for the items issued for sales order?

    Dear Yadav,
    -Activate insp type 10 in the Material Master-QM view insp setup (MM01)
    -Create Inspection plan (QP01) with usage as Goods issue & assign Insp characteristics
    -Create Sales order (VA01)
    -Delivery against the Sales order (VL01N) or through sales order menu. Delivery Insp lot gets created after Delivery is made.
    -Do results recording and take usage decision (QA32)
    Note:
    -This inspection is non stock relevant inspection. There will be no stock posting through Quality Management.
    -Post Goods issue in the delivery can be made only after taking the usage decision.
    Regards,
    Keerthi.

Maybe you are looking for