GR/Ir account clearance . MR11

Hi Friends,
Need you help to clarifiy the following
1.  I made a PO & Goods receipt is done .
2.  I have done Invoice for this PO and also reversed the invoice i.e. Credit Memo done
3.  Since I have done the invoice reversal now the GR/IR balance will exit . Now I want to clear the GR/IR account by cancelling the GR. i.e I want to do Movt type 102
4. While doing cancellation i.e. movt type 102 , system gives warning message as "Follow-up invoice(s) exist for Purchase Order 4500009019 00010 "
5. But it is getting posted and the GR/IR balance is getting nullified. Is this process is OK . Will it have any other financial posting impact?
Thx
deva

Hi
Check the value of credit memo posted. If it cancels total invoice value and quantity then you can run MR11 for GR cancellation. You can check the final impact under status tab in PO.
Thanks

Similar Messages

  • GR/IR Account Maintenance MR11

    Hi All,
    I wanted help on the following matter:
    1 . While executing MR11 GR/IR account maintenance , I get a list of purchase orders.Does  MR11 take into account the price differences or just shows the Purchase Orders with quantity differences?
    2.If I see the details of the GR/IR clearing account G/L in FS10N, I see the debits,credits, differences and cummulative differences.Does the cummulative difference shown in FS10N relate to the difference that is shown in MR11.Is there any relation or logic between the data that is shown under these transactions.

    Hi
    GR/IR Account as the name indicates the link between GR ie Goods Receipt and IR ie Invoice Verification.
    The balances would exist in the scenarios wherein Goods Receipt is done but I nvoice Verification is not done or the other way round ie Invoice Done but GR not done.
    As you are aware that GR/IR account is credited at the time of Goods Receipt and debited at time of Invoice verification and so balances are nullified.So when any of the 2 is not done then you need to do GR/IR Account maintenance manually.
    Hope this clarifies
    Regards

  • GR/IR Account maintainance MR11

    Dear all,
    Please explain what is GR/IR Account maintainance??
    MR11 T code.
    How do we maintain the GRIR account and why it is required?
    Also when do the system show the GR/IR balance?
    Please explain step by step how to maintain this account.
    Best Regards,
    Venu

    Hi,
    MR11 shows the Goods Receipts which their invoices are not complete (such as not totally invoiced or not received)
    (=GR<>IR)
    There is always a probability for some vendors that do not send their invoices on time and so invioicing couldnt be complete.
    And if you are sure that you will never get these cleared with MR11 you can clear such records.
    For Example
    PO for 1000 pcs
    GR for 1000 pcs
    Invoice has come for 990. And you know that there wont come any invoice for the 10 pcs left.
    Or
    vice versa
    PO for 1000 pcs
    GR for 990 pcs
    And invoice  for 1000pcs
    Best Regards
    Hope it helps
    Please reward if found useful

  • MR11 - post to sepcific accounts

    I need to clear the GR/IR account by MR11, i would like to know it is possible post the balance to specific in order to clear the GR/IR. So the outcome would be DR GR/IR and CR sepcific accounts after done the MR11. Thanks!

    Hi,
    Further to your querry, we do map the GL Accounts at OBYC for GR/IR Clearing accounts and its accounts determinations.
    As I know, while doing GRIR, the credit should be as per OBYC (FI-MM Integration).
    If you require, Crediting certain specific accounts after MR11, would be manually and can not be automatically.
    Regards
    VG

  • Purpose & usage of t.code MR11(Maintain GR/IR Clearing account)

    Hi All,
    Could you pls let me know the Purpose of the T.Cde MR11(Maintain GR/IR Clearing account) and how do we use it.
    Is that only to verify and post the valiances between GR & IR.
    Rquest for quick help as we have user training tomorrow.
    thank you
    Chandu

    MR11 is used to clear quantity difference between GR and IR.
    Some time we may have delivery surplus or Invoice surplus this lead to credit or debit balance in GR/IR account for specific PO.
    For e.g. you have PO for 10 quantities at price RS 100 per Unit.
    You received GR for 8 Quantity and invoice for 10 quantities.
    GR/IR account has Debit balance for Rs 200 because of above business scenario. Suppose after few days or months you realize that vendor is not going to send remaining 2 quantities for which you have already invoiced and paid.
    Now you clear GR/IR account through MR11 by updating the stock value if there is enough stock coverage to the value of 200, if there is no enough stock coverage then difference is posted to price difference gain or loss account.

  • MR11 GRIR Account Clearing

    Hello all,
    The company I am working for has not been clearing the GRIR account since 2003.  I'm attempting to clear the account with MR11.  For calendar year 2004 I had 17 documents error because they were linked to 7 different POs that were linked to 1 WBS element and 6 Networks that have been closed.  Does anyone have an idea on how to get these documents to clear without opening up the old WBS Element and Networks?
    I look forward to your help.
    Best regards,
    Dan

    I have tried using F.13 and what happens is the document is listed as a "Document that cannot be clrd" but there is no explanation as to why it cannot be cleared.  Do you have any other suggestions?

  • MR11 : Customizing account ?

    Hi,
    What's the customizing point for Tcode MR11 ? where we put the account for MR11 document ?
    Regards.

    Hi,
    As such there is no configuration required to execute MR11.
    Just select the PO, to be specific and accurate, and execute then system will post the document reversing the GR/IR impacts....Just try it in Quality you will see yourself rather awaiting long time reply...
    Regards,
    Chintan Joshi

  • GR/IR clearing account

    Hi all,
    We clear the GR/IR account in MR11 t code.
    Case and issue is explained as follows ( Consider that there is no freight/delivery/ discount/ tax)
    1) Created PO
    2) Done GR
    3) Material master and stock account updated
    4) Ran transaction  MR 11, I could see the above item as GR/IR balance account because it is open and no invoice is posted
    5) Posted the document in MR11 to clear the GR/IR balances. Stock account credited and GR/IR debited
    6) Posted a invoice in MIRO wrt the same PO
    7) in miro vendor account credited and GR/IR debited
    There is a balnce in GR/IR account, which is equal to invoice value. This balace is not seen when we run MR11.
    Why? and how to clear this GR/IR balance?
    Regards.
    Milind

    This is because you ave executed MR11 before invoice was posted. Execute steps 4 and 5 after 6and 7.
    Regards
    Narasimhan

  • Credit note entry without GR/IR account-FI/MM integration

    Hi
    Is there any way where if we post a credit note using MIRO,we can avoid GR/IR account and directly post an entry
    Dr Vendor
    Cr Inventory/consumption account?
    As per standard existing settings,it is first debited to Gr/IR account at first time and if we do MR11 ,then it is debiting to Inventory/consuption account,is there any way we can bypass GR/IR account and MR11 process for credit notes?
    hin

    Yes, in MIRO use the option "Subsequent Credit"
    And give your inventory/ consumption account in the GL acocunt tab (Provided your inventory/ consumption accont should not be set to post automatically in GL master data)
    Regards,
    Gaurav

  • Clearing GR/IR using MR11 and F.13

    Can someone clarify what is the dfference in clearing aGR?IR account using MR11 and F.13.
    Also F.19- how different is it from the above.

    Hi,
    A discrepancy occurred between Goods Receipt (GR) and Invoice Receipt (IR). This needs to be cleared. Examples of situations where this occurs are:
    1. If the goods have been received, the vendor hasn’t invoiced for the goods and won’t be invoicing (the vendor has gone out of business). Use MR11      
    2. An invoice with reference to a Purchase Order was paid through accounts payable FI instead of procurement. Use MR11
    3. The goods were received and sent back to the vendor for poor quality. The vendor was accidentally paid and we will not be reimbursed due to bankruptcy of the vendor  Use MR11
    4. Quantity ordered = 100 ea. at a unit price of $1.00, receive quantity of 97 ea. at a unit price of $1.00.  If the remaining balance of 3 ea. will not be shipped, purchaser needs to reduce the open quantity on the purchase order to reflect the actual amount received.  DO NOT Use MR11
    Maintenance of the GR/IR Clearing account should be done regularly. It’s recommended to be done weekly for both IR surplus and GR surplus. Run IR surplus with movement up to today. For GR surplus, run maintenance with movement one or two months old.
    NOTE:  During the normal business flow of the documents, 99% of your Purchase Orders will show up on the GR/IR at some time and should NOT be cleared. Nothing should be done to them through MR11.  When the normal business process is completed, the doument will no longer have a discrepancy between the GR and IR, and will not be on the list when you run MR11.
    During the normal business flow of the documents
    <b>Coming to F.13 -</b>
    Example :  in our client Cashier's office runs this procedures every afternoon after 4 p.m to clear the day's payments and their associated invoices.
    Program SAPF124 is involved in this .
    If you need additional information email to [email protected]  , i can send you detail document on MR11 with screens and snap shots.
    Please assign points if it is useful .
    Thanks.
    Ramesh Choragudi

  • MR11 - clearing not related stocks

    Hi Sirs,
    I would like to know, is it possible to maintain when we run trans.MR11, clearing posting not corresponding with account for stocks in warehouse? And where I have to change the accounts if it is possible?
    That's because our client want to change this solution.
    Thank you in advance.
    Regards,
    Dani

    Thank's for quick answer, but I need to know may I clear the difference to cost or profit account with mr11? And how to maintain this. I don't want to change the quantities and value of warehouse.
    And if i clear with f-03, how can i exclude the cleared amount and orders from mr11 report? Is it possible?
    Regards,
    Dani

  • GR/IR Clearing MR11 error

    Hi, Expert
    I want to clear the GR/IR account through MR11 when i run some item shows  the error  - System error: Error in routine VERARBEITEN_BZNK_DATEN, WE_BPMNG<0 Message no. M8607
    regards
    gk

    hi
    check this note Note 722438 - MR11: Error message M8 607/error log

  • ERROR IN MR11

    Dear Experts,
    I am trying to post a Purchase Order for Maintenance of GR/IR Clearing Account in MR11 with posting date 31.03.2010 on 02.04.2010. System is issuing error " Posting takes place in previous fiscal year " and not allowing to post.
    In MMRV T-Code, details are as,
    Current period   01 2010
    Previous Period 12 2009
    Allow posting to previous period has been ticked
    But still why system is issuing error?
    Kindly help me out to post the document. Also, i just want to know MR11 should be performed as Month/Year end activities?
    Expecting your valuable replies. Thanks in advance..
    Regards,
    Kumar
    Edited by: KUMAR LP on Apr 3, 2010 8:20 AM

    Dear Mathew,
    Thank you very much..As you said, FI period was not open for posting period. Edited the same in OB52.
    Thanks and expecting your support in future also..
    Regards,
    Kumar

  • MR11 and FAGLL03 not in balance

    Good Morning Gurus-
    Should GR/IR account via MR11 be in balance to FAGGLL03 G/L GR/IR for the same period?  What scenario would result these be different?  We have a minor difference.
    Thank you.

    I tried to run ASKB and found this  error.
    "When creating the accounting document, the system could not find account 'Capital. difference/Non-operatng expense' in depreciation area 35 for company code xx19.  "
    Depreciation area 35 is our delta dep area and I am trying to add the value to existing asset. It worked in Asset ledger but not reflected in GL.
    Can some give me  lead how to fix this error ?
    Thanks
    Satya

  • Mr11 not showing Purchasing Document

    I have a scenario where the purchasing document is not being shown in MR11. The GL view that is FAGLL03 shows this particular document but this is not revealed while mataining GR/IR account in MR11. This document is also shown after running MB5S that is list of GR/IR balances. Can anyone let me know the reasons of this not being shown in MR11.

    Hi
    Check if those PO are blocked for any reason. If yes, you may choose to release them. As far as I understand MR11 does not show blocked PO Line Items and PO
    Regards
    Sanil Bhandari

Maybe you are looking for