Great N200! Works after being washed in was

It is a N200 256M player and was in the pocket of a pants with battery. I did not know that when I put those clothes into the washe and started a cotton washing process. I found out the player when I pulled those clothes out of the washer this morning. But to my surprise, when I turn the keys on, it still works. The sournd is still good. It is amazing! I will recommend it to every one of my friends.

Next time something like that happens it would be a good idea to remove the battery and not turn on the player for around 0 days or so to give the player a chance to dry out before turning it on. What is most likely to damage it is turning it on while it is wet.

Similar Messages

  • Satellite L870-165 does not work after being repaired by their service

    Laptop Toshiba warranty does not work after being repaired by their service twice.
    Model: Satellite L870-165
    Computer will not boot, stays with black screen stating: No bootable device-Please restart your system
    After reboot still happening the same.
    I called Toshiba phone incident and after trying several options I said take him to repair the service.
    They first told me it was the hard drive, then phoned me to indicate that reinstalling and finally it was the motherboard, which supposedly changed. The day after being picked computer repair returned to give exactly the same error, only malfunctioned one evening.
    After another call to 902 the Toshiba warranty service, I went back to take the service, this time I changed the hard drive. When I got home the computer did not start even once, again gives the same error.
    I believe that this team comes with a factory default so that its solution is not easy because even the technical service told me that I did not know what else to do with it.

    >Computer will not boot, stays with black screen stating: No bootable device-Please restart your system
    This message pops up because the notebook cannot find the Windows system.
    There could be either an problem with the HDD or maybe the HDD is OK but the Windows system isnt preinstalled properly.
    You said that the service agent changed the HDD. But did someone install the Windows system?
    You can try to do it yourself take your recovery disk (hopefully you created such disk in the past) and boot from the recovery disk in order to install the system.
    In case booting from the Disk would not be possible, go to BIOS (F2) and disable the secure boot and change from UEFI to CSM mode

  • Blackberry stoped working after being droped.

    Blackberry stoped working after being droped.

    Hi and Welcome to the Forums!
    Please open a new thread in the forum for your specific device so that those experts can help you:
     http://supportforums.blackberry.com/rim/?category.id=Smartphones
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • IPOD Nano 4th Gen still plays but has black screen after being washed

    A  few months ago my mother washed my iPOD Nano 4th Gen by accident - we had it in a bag of rice for a long time. After a while it refused to start up so we put in a drawer and hoped it would "magically" fix itself.
    Few months later... it works (plays music, can select menus..)!
    But the screen is black, lol.
    I have tried restoring it in iTunes, also resetting the Nano repeatedly with the buttons and fiddling with the hold button, but none of it works... Could the backlight be shot after being damaged in the wash? Is it possible for Apple to restore it even though my warrenty is now gone?
    Any help would be greatly appreciated!

    Welcome to the Apple Support Communities
    Your problem isn't covered by warranty, so you will get a refurbished iPod. See how much it will cost > http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod

  • Headphones no longer work after being plugged into speaker

    Hi i purchased a ipod touch 5th generation 32 gb bundle from target just over a week ago which came with the iCoustic 20 in 1 Accessory kit Model No : IC184. After plugging the ipod into the supplied speaker this morning trying to listen to music it kept making stacic like noises and changing volume it was alwful to try and listen so gave up and went back to taking it off speaker and playing it back through apple headphones but now after being plugged into the speaker the headphones wont work its just a buzzing sound if you turn the volume up all the way loud the music will come back through headphones then when turning it down it cuts out again or if you manage to get the music it will stop after a couple of seconds. I have done a factory reset but it has made no difference.Please help have a very upset daughter it is frustrating do we take this back for a refund and get a new one if so how do we keep the music and photos etc she has on this one? Thankyou.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

  • Flash drive no longer works after being connected to a Windows XP machine.

    After being opened on a Windows XP machine, the contents of my flash drive now shows up on my Macbook pro as a single .lnk file. What happened? It's MS-DOS (FAT32).
    Is there any way out of this or has all my data been lost? I've never experienced this issue previously.

    Thanks. I've now scanned it with both Sophos and ClamXav and both have come up negative for infection.
    At least while the scan was running I could see that all my data is still there as the name of each file appeared as it was going through the scan.
    My efforts to sort this out seem to have made things worse as now it opens up word whenever I try to see the contents. I'll try it on a PC tomorrow and see if I can figure out what happened. Looks like the file system has been damaged in some way.

  • HT1363 Is it possible for my i-pod classic to work after accidently washing it in a washing machine ?

    Is it possible for my i-pod classic to worg again after accidently being washed in the washing machine ?

    Thanks Tom, that did the trick. Appreciate your help and love your DVD and style. Cheers.

  • Mouse stops working after being left alone

    My issue is: If I don't use my mouse for an extended period of time (especially if afk, happenes when at the computer too though) it stops working and I need to replug it for it to work, the time seems to range from 2 seconds to half an hour or more without any real logic to it.
    Expected behavior: the mouse should remain functional even after not being used for a variable amount of time.
    Originally I suspected it was because it uses 5V 100mA but after examining my previous mouse and the USB spec I can conclude that is not the case as this behavior was not expressed with my previous mouse, further this behavior remains even after I move it from the usb hub to one of the ports on the computer.
    A quick $lsusb later and I have the device id
    Bus 002 Device 085: ID 056a:00dd Wacom Co., Ltd Bamboo Pen (CTL-470)
    Bus 002 Device 048: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller
    Bus 002 Device 047: ID 0421:026a Nokia Mobile Phones N97 (mass storage)
    Bus 002 Device 026: ID 05e3:0608 Genesys Logic, Inc. Hub
    Bus 002 Device 095: ID 1b1a:7004
    Bus 002 Device 092: ID 413c:2003 Dell Computer Corp. Keyboard
    Bus 002 Device 072: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
    Bus 002 Device 071: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
    Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 005: ID 04f2:b1d6 Chicony Electronics Co., Ltd CNF9055 Toshiba Webcam
    Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    1b1a:7004 seems to be an unknown device (seeing that it works fine on windows and mac based computers I can conclude that the hardware isn't faulty)
    Perhaps linux doesn't realize it requires 100mA? Or maybe it isn't getting 12MB/s speed but instead only 1.5?
    Very well, #udevadm can tell me this.
    looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1.2':
    KERNELS=="2-1.1.1.2"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{devpath}=="1.1.1.2"
    ATTRS{idVendor}=="1b1a"
    ATTRS{speed}=="12"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{busnum}=="2"
    ATTRS{devnum}=="95"
    ATTRS{configuration}==""
    ATTRS{bMaxPower}=="100mA"
    ATTRS{authorized}=="1"
    ATTRS{bmAttributes}=="a0"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{maxchild}=="0"
    ATTRS{bcdDevice}=="0110"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{version}==" 1.10"
    ATTRS{urbnum}=="11120"
    ATTRS{ltm_capable}=="no"
    ATTRS{manufacturer}==" USB Mouse "
    ATTRS{removable}=="fixed"
    ATTRS{idProduct}=="7004"
    ATTRS{bDeviceClass}=="00"
    ATTRS{product}==" USB Mouse "
    Well... apparently my theories are all incorrect, the LEDs stop pulsing when the mouse 'dies' and just remain on so at least I can conclude it doesn't power down.
    Any assistance would be greatly appreciated.

    $ sudo echo -1 >/sys/module/usbcore/parameters/autosuspend
    bash: /sys/module/usbcore/parameters/autosuspend: Permission denied
    ditto for $sudo for i in /sys/bus/usb/devices/*/power/autosuspend; do echo -1 > $i; done
    #for i in /sys/bus/usb/devices/*/power/autosuspend; do echo -1 > $i; done
    does execute without error but it changes nothing.
    the buttons do not wake the mouse which is why this is such a problem (well, the dpi button and LMB, RMB and MMB don't, there are two other buttons but I can't recall if I tested them)
    Physically unplugging and re-inserting the mouse and keyboard fixes the problem regardless of any changes. The thing is that I would like it to be working from boot, and not having to replug them.
    Obviously not working on my end though seeing I have to replug it every time it dies.
    thanks for linking the post though (I had already read it but going through it a second time at least proves it wasn't just a one off that I didn't do it right or something but that it actually doesn't work. Odd that root doesn't have permission to do some things though, seeing that root should have ultimate power).

  • Yamaha XG-AC Audio device not working after SP2 for XP was installed

    Hi,
    i'm new in this forum and maybe my question is a stupid one but i'm not able to solve this problem.
    My Satellite 5200-801 doesn't make any sound after i've installed SP2 for XP. I tried to find a new driver for Yamaha XG-AC Audio Device( the one that doesn't work is 6.13.10.2152 (date 19/07/2002)but i was not able to find anything.
    Please, could you help me ?
    Thanks
    Bruno

    Hi,
    I found another posting in this forum about this issue!
    Your Satellite 5200-802 has a sound chip called Yamaha YMF753 and it is built in different notebooks! This chip does make problems with Service Pack 2 because MS regards the Yamaha AC-XG sound driver as being unstable. When Service Pack 2 is installed, Windows will disable the sound driver.
    Here are some links which could help you!
    Yamaha Generic Driver:
    http://drivers.soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html
    Relevant links:
    http://www.yamaha.co.jp/english/lsiexp.html
    http://support.microsoft.com/default.aspx?scid=kb;en-us;328435
    Happy new year!
    TOK

  • Slow computer works after being in Safe Mode?

    I'm puzzled and I'm hoping someone can explain this.
    There was a user complaining about poor performance on his Dell Latitude 5530 with Windows 7 Pro. He said it started after some updates loaded on Saturday and has been like that since.
    I remoted in and it was indeed extremely sluggish. In task manager the CPU Usage was consistently near or at 100%. I looked at what I could think of and couldn't see anything obvious. Couldn't find any Malware, hardware passed diags, chkdsk ran and didn't
    find anything, checked the startup folder and MSConfig and didn't see anything obvious but I admit I'm not quite sure what to look for.
    I had him boot into Safe Mode and it was better but still sluggish with a CPU usage of around 35%. I finally gave up and we made plans to have him send it in for further testing or reimaging. Then, on my way home, I got a call from him and he said he restarted
    in normal mode and it's working fine now with a CPU usage around 1%.
    The only thing I can think of is that something might have gotten hung up and Safe Mode allowed it to un-hang? I guess I'll see if it's still working tomorrow but I would be greateful if anyone has an explanation or could offer some advice.
    Thanks.
    Chris Hansen

    TH
    If the user experiences a slow down again you can have them install then run windows performance recorder (if they have the skillset).  With the trace we should be able to find the cause.
    In order to diagnose your problem we need to run Windows performance toolkit the instructions for which can be found in this
    wiki
    If you have any questions feel free to ask
    Please run the trace when you are experiencing the problem
    Wanikiya and Dyami--Team Zigzag

  • Help - My macbook keyboard doesn't work after being sprayed with windex.

    My mom cleaned my keyboard with windex.  I'm assuming that this short-circuited something or other so the keyboard isn't being processed.  Anyways, I let it dry out for a day and some of the keys work now, but the macbook randomly shuts off.
    Should I let it dry off for a little longer?
    Do I need to replace the sheet underneath the keyboard?
    What should I do?
    Thanks.

    I have a new TX2 1300 also and i have the same exact problem.  When I use the touchsmart program in laptop mode - no issues with the keyboard.  BUT if I use the Touchsmart program while rotated in tablet mode - the keyboard turns off and is not usable until I reboot my laptop. Very repeatable.  I also verified I have the latest BIOS.  After I read your post yesterday I called the HP support and they were not able to reproduce the issue on their lab compter (a TX2Z 1000 - NOT a TX2Z 1300).  I updated my bios with the tech on the phone just to pacify them - and I still have the issue.  The tech then checked her database and amazingly enough HP knows of this issue and is working on a patch for the Touchsmart program.  They are going to email me when the patch is ready.
    I have another issue - and I am curious if you see it too.  My screen goes out of calibration constantly.  Basically I lose the touch sensitivity right around the WIndows start button on the lower right part of my screen.  Affects both capacitive (finger) and digital (pen).  I have to run the reset progam in the NTRIG Touch Tuning utility in the windows control panel to get that part of my screen to become responsive again.  Very disapointing - have you seen any issues with the touch screen sensitivity on any parts of the screen ?
    Thanks,
    Kevin K..

  • Dreamweaver CS5 ftp does not work after my host server was updated

    I'm on an iMac running Mavericks.
    I'm using Dreamweaver CS 5.5 from the creative suite.
    Suddenly the FTP function in Dreamweaver does not work.
    My website host stated that they were forced to upgrade their server software for FTP and the Dreamweaver was not compatible.
    Will there be an upgrade soon to resolve the problem? I'm having to use Filezilla to upload/download files from my site and it's a real pain compared to just using Dreamweaver.
    Please help ASAP! Thanks.
    Marcus

    DWCS5.5 hasn't received an update in years and is no longer supported by Adobe. The chances of there being an update for any new compatibility issue is pretty much slim to none.
    If (and it's a big if) your hosting company actually did something that made DW itself incompatible with the server, you would just have to use some other FTP program, like the free Filezilla client, to do your uploads.
    Not a big deal, just a small extra step.

  • Why 3G doesn't work after being updated my iphone 5 to IOS 6.1

    I've a problem with my iphone 5 since updating it´s operating system , I mean IOS 6.1 , so it was last thursday when I did that over the air , before I used perfectly my 3G but just after this update it doesn't work as usuall , I'm really disappointed about that and I hope that apple gonna give us the opportunity to correct that by another update this week , On the other hand I live in Casablanca , Morocco

    Same with mine. Its disaster. And now making my iphone 5 become warm. Pleaseeee apple don't just release anything that not fixed yet. Feel so sad how come apple like this.

  • IPad 3 Why 3G does not work after being on WiFi

    When I take my iPad 3 out of my house, I have to reboot it to get a 3G connection. The 3g icon shows that it is connected but when I try and access any connection it says no internet connection. My iPad 1 seemed to work ok. I've also tried putting it in Airplane mode and back again but this has no effect.
    Any suggestions please? Many thanks.

    All of you are not ALONE ! Most of us here in Singapore be it with Singtel, Starhub or M1 3G network, all of us with the "NewiPad" are sharing the same pain of this "Cellular data not connected" problem. When this problem occurred, one must power cycle or at least reset network setting to get the 3G data connection work again. A daily of power cycle 3~5 times for my new iPad was need. All methods like below tried but still DOES NOT fix the problem.
    1. Reset Network setting.
    2. Reset iPad back to default.
    3. Changed Singtel APN name from "e-ideas" to "internet" still the same.
    4. Changed a complete brand new sim card.
    My current fixed was, called up Singtel ISP to reset my iPad 21Mbps 3G Line in their system. In my end, I need to power off my new iPad to complete the cycle. So far it has been working fine for 42 hours now.
    By looking at the "General > About > Cellular Data Number" was "Unknown". This lead me to think it might be a bug in current new iPad iOS 5.1. To be more precise, it might narrow down to the "Big & Bad Qualcomm Radio chipset Driver" problem?
    If that was true, jess.. I truly dislike "Qualcomm inside" devices. It make me come to remembered Dopod/HTC D810 the most funniest released WM device in history. When D810 first hit the market, it does not features any gps function at all when in true fact D810 did come with "Qualcomm" GPS chipset built-in since day 1. Dopod/HTC took more than 6 months to release a very crippled firmware that included Qualcomm GPS chipset driver with lots of trouble and start announce all the customers in the world, including those who's bought D810 more than 6 months ago. What a joke!
    That's not all the "Qualcomm" funny facts. They then hit the wall again with Dopod/HTC Tytn-II, another WM cellphone with "Qualcomm 3D Graphic chip built-in, BUT WITH NO 3D DRIVER BUILT-IN". Hahaha.. what another big "QUALCOMM" historical joke of all time.
    Anyway, hopefully Apple can found the actual trouble or fixed "might be Qualcomm driver problem again?" in the next iOS 5.2 release.
    Until then, I've wishes everyone with the cellular data connection trouble eventually manage to solved your headache in any solutions provided by many and living happier with your new iPad, the same for me.

  • Why is my iphone 4 suddenly not working after being forced to "restore to iTunes" and automatic update to iOs7. Phone has been restored, reset and recovered. Will not activate to server. I need a new phone Apple!!

    I heard about all the problems with the new iOs 7 update but also heard Apple would force me to do it. I tried to update but didn't have enough space. Had to delete ALOT of my apps and still not enough space. Phone was working perfectly fine and message pops up that "I will not have any service until I restore to iTunes. I plug into laptop to restore and it forces me to update to iOs7. Takes 3 hours. It updates but phone doesn't restore. Have tried all the troubleshooting tips:reset to factory settings, recover etc. Got a new SIM card because it said I don't have one but I do. Apple support wouldn't help me because I was out of warranty, and said I would have to pay. Went to the Apple store and they couldn't fix it and said "it's a hardware issue" that will cost me $170.00+.  I FIRMLY BELIEVE THAT THE NEW iO7 FRIED MY PHONE'S HARDWARE. The phone is on the HELLO stage and keeps searching but will not activate to server- it's temporarily unavailable. Have tried multiple times.I have a 3 year contract with Rogers and the phone is less than 2 years old. Apple needs to take responsibility for crashing my phone. I NEED A FREE NEW PHONE!!!

    Restore it to factory settings, then set it up from your back up. Did this last year when I got my new iPod, and it worked. I have no idea why syncing OTA can sometimes glitch, but hopefully this will help.

Maybe you are looking for