Why is my iphone 4 suddenly not working after being forced to "restore to iTunes" and automatic update to iOs7. Phone has been restored, reset and recovered. Will not activate to server. I need a new phone Apple!!

I heard about all the problems with the new iOs 7 update but also heard Apple would force me to do it. I tried to update but didn't have enough space. Had to delete ALOT of my apps and still not enough space. Phone was working perfectly fine and message pops up that "I will not have any service until I restore to iTunes. I plug into laptop to restore and it forces me to update to iOs7. Takes 3 hours. It updates but phone doesn't restore. Have tried all the troubleshooting tips:reset to factory settings, recover etc. Got a new SIM card because it said I don't have one but I do. Apple support wouldn't help me because I was out of warranty, and said I would have to pay. Went to the Apple store and they couldn't fix it and said "it's a hardware issue" that will cost me $170.00+.  I FIRMLY BELIEVE THAT THE NEW iO7 FRIED MY PHONE'S HARDWARE. The phone is on the HELLO stage and keeps searching but will not activate to server- it's temporarily unavailable. Have tried multiple times.I have a 3 year contract with Rogers and the phone is less than 2 years old. Apple needs to take responsibility for crashing my phone. I NEED A FREE NEW PHONE!!!

Restore it to factory settings, then set it up from your back up. Did this last year when I got my new iPod, and it worked. I have no idea why syncing OTA can sometimes glitch, but hopefully this will help.

Similar Messages

  • My phone has been losing calls and according to the apple store i need to reset it due to a software fault - i have done this and still have the same problems. how do i reset the phone without reinstalling the soft ware fault by way of icloud backup

    my phone has been losing calls and according to the apple store i need to reset it due to a software fault - i have done this and still have the same problems. how do i reset the phone without reinstalling the soft ware fault by way of icloud backup

    Well, it appears that your backup is corrupt, thus causing your issue. So, you'll have to restore as a new device, & not from backup. Follow this by syncing your content back to your phone:
    http://support.apple.com/kb/ht1414
    Do not restore from backup.

  • Satellite L870-165 does not work after being repaired by their service

    Laptop Toshiba warranty does not work after being repaired by their service twice.
    Model: Satellite L870-165
    Computer will not boot, stays with black screen stating: No bootable device-Please restart your system
    After reboot still happening the same.
    I called Toshiba phone incident and after trying several options I said take him to repair the service.
    They first told me it was the hard drive, then phoned me to indicate that reinstalling and finally it was the motherboard, which supposedly changed. The day after being picked computer repair returned to give exactly the same error, only malfunctioned one evening.
    After another call to 902 the Toshiba warranty service, I went back to take the service, this time I changed the hard drive. When I got home the computer did not start even once, again gives the same error.
    I believe that this team comes with a factory default so that its solution is not easy because even the technical service told me that I did not know what else to do with it.

    >Computer will not boot, stays with black screen stating: No bootable device-Please restart your system
    This message pops up because the notebook cannot find the Windows system.
    There could be either an problem with the HDD or maybe the HDD is OK but the Windows system isnt preinstalled properly.
    You said that the service agent changed the HDD. But did someone install the Windows system?
    You can try to do it yourself take your recovery disk (hopefully you created such disk in the past) and boot from the recovery disk in order to install the system.
    In case booting from the Disk would not be possible, go to BIOS (F2) and disable the secure boot and change from UEFI to CSM mode

  • HT5312 I keep getting an email from Apple telling me that my Apple Id has been successfully reset when I did not reset them.  Started early June 2013 and in a month i have had to reset it three times. Apple support was not helpful.  Any suggestions?

    I keep getting an email from Apple telling me that my Apple Id has been successfully reset.  I did not reset it.  Since early June 2013 to now i have had to reset it 3 times.  It is not an easy one to remember either. Initally I thought it was some pfishing expedition but no purchases have been confirmed by my visa.  My kids use my Apple Id to download APs and I am informed when this happens.  Nothing strange happening on the financial site at all. Just frustrating as we have to keep updating the ID to use messenger, I cloud etc on all of the devices.  I called Apple Support and the girl initally said she knew nothing about this but then spoke to someone else and they are aware of this ongoing problem and are working on it.  Any suggestions? Are others having the same problems?

    If the system didn't ship with Mountain Lion originally and you didn't purchase Mountain Lion yourself, then you will need to purchase. A purchase by the system's original owner cannot be transferred to you.
    Unless you have another system on which you have purchased Mountain Lion, you will need to first install Mac OS X 10.6.8 on the iMac, for which you'll need either the original installation disks, if the iMac came with 10.6, or a retail copy of 10.6. Install 10.6 and upgrade to at least 10.6.6, and then you can buy Mountain Lion from the Mac App Store, presuming of course that the imac can support Mountain Lion. See:
    http://www.apple.com/osx/how-to-upgrade/
    Regards.

  • My phone has been restored using iTunes.  All of my previous photo are not downloaded on my phone and I'm unable t delete - no trash bin.

    My phone has been restored using iTunes.  All of my previous photo are downloaded. I'm unable to delete the photos from the phone - no trash bin.  It has utilized all my storage and I'm unable to use any of my apps.

    Hello there, Jeanne2919.
    There is a great Knowledge Base article that is right up your alley:
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    Specifically this section:
    To delete synced photos and videos
    In iTunes, select the device icon in the Devices list on the left. Click the Photos tab in the resulting window.
    Choose "Sync photos from."
    On a Mac, choose iPhoto or Aperture from the pop-up menu.
    On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
    Choose "Selected albums" and deselect the albums or collections you want to delete.
    Click Apply.
    To delete Camera Roll photos and videos
    There are two methods to delete items from the Camera Roll:
    Import the Camera Roll to your computer, choosing to delete items after import.
    or
    Delete photos and videos from your device manually. Open the Photos application, open the Camera Roll, tap the Action button, tap each photo to select it, and tap the Delete button.
    Note: For photos and videos you want to save for later, import them to your computer before deleting them from the Camera Roll.
    Thanks for reaching out to Apple Support Communities!
    Cheers,
    Pedro D.

  • IN TROUBLE! Phone has been restored, lost everything - forgotten Apple ID and Password!!! HELP

    IM IN TROUBLE! Phone has been restored, lost everything - forgotten Apple ID and Password!!! HELP

    As for forgetting your Apple ID, head to If you forgot your Apple ID password - Apple Support  and follow those instructions.
    As for those things you lost, well that's your own fault for not syncing to iCloud or your computer. You can re download most previously downloaded items once you log into your Apple account in iTunes or the AppStore.

  • My i phone has a passcode onit so it will not allow me to connect to itunes my phone has froze and dosent allow me to type in my passcode what shall i do

    my i phone has a passcode onit so it will not allow me to connect to itunes my phone has froze and dosent allow me to type in my passcode what shall i do?!!!

    Check here http://support.apple.com/kb/HT1808

  • MacBook Pro 10.6.8  My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it.  All this after a scheduled software update. Any ideas??

    MacBook Pro 10.6.8  My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it.  All this after a scheduled software update. Any ideas??

    kwmlr439 wrote:
    CSOUND Read the title please:
    Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
    The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
    10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
    Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
    Message was edited by: Shootist007
    Message was edited by: Shootist007

  • I lost my iPhone recently. It has since disappeared from support profile. Does this suggest that the phone has been restored and synced with another account?

    I lost my iPhone recently. It has since disappeared from support profile. Does this suggest that the phone has been restored and synced with another account?

    See:
    What to do if your Apple ID has been hacked
    (Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.)

  • Apple Ipad has been factory reset and removed from manage devices but the new user can't register it under a new ID

    iPad generation 2 has been factory reset, removed from managed devices, apple support, and the device still continues to say it's locked by my ID and cannot be unlocked and registered to a new ID.
    HELP!

    Even if you are sure you have done all of this, do it again slowly and in the order given:
    Prepare your device to sell or give away
    If there is still a problem, post back with the exact complete wording of the error message
    received.

  • IPad 3 Why 3G does not work after being on WiFi

    When I take my iPad 3 out of my house, I have to reboot it to get a 3G connection. The 3g icon shows that it is connected but when I try and access any connection it says no internet connection. My iPad 1 seemed to work ok. I've also tried putting it in Airplane mode and back again but this has no effect.
    Any suggestions please? Many thanks.

    All of you are not ALONE ! Most of us here in Singapore be it with Singtel, Starhub or M1 3G network, all of us with the "NewiPad" are sharing the same pain of this "Cellular data not connected" problem. When this problem occurred, one must power cycle or at least reset network setting to get the 3G data connection work again. A daily of power cycle 3~5 times for my new iPad was need. All methods like below tried but still DOES NOT fix the problem.
    1. Reset Network setting.
    2. Reset iPad back to default.
    3. Changed Singtel APN name from "e-ideas" to "internet" still the same.
    4. Changed a complete brand new sim card.
    My current fixed was, called up Singtel ISP to reset my iPad 21Mbps 3G Line in their system. In my end, I need to power off my new iPad to complete the cycle. So far it has been working fine for 42 hours now.
    By looking at the "General > About > Cellular Data Number" was "Unknown". This lead me to think it might be a bug in current new iPad iOS 5.1. To be more precise, it might narrow down to the "Big & Bad Qualcomm Radio chipset Driver" problem?
    If that was true, jess.. I truly dislike "Qualcomm inside" devices. It make me come to remembered Dopod/HTC D810 the most funniest released WM device in history. When D810 first hit the market, it does not features any gps function at all when in true fact D810 did come with "Qualcomm" GPS chipset built-in since day 1. Dopod/HTC took more than 6 months to release a very crippled firmware that included Qualcomm GPS chipset driver with lots of trouble and start announce all the customers in the world, including those who's bought D810 more than 6 months ago. What a joke!
    That's not all the "Qualcomm" funny facts. They then hit the wall again with Dopod/HTC Tytn-II, another WM cellphone with "Qualcomm 3D Graphic chip built-in, BUT WITH NO 3D DRIVER BUILT-IN". Hahaha.. what another big "QUALCOMM" historical joke of all time.
    Anyway, hopefully Apple can found the actual trouble or fixed "might be Qualcomm driver problem again?" in the next iOS 5.2 release.
    Until then, I've wishes everyone with the cellular data connection trouble eventually manage to solved your headache in any solutions provided by many and living happier with your new iPad, the same for me.

  • Ipod touch not working after being attached to new charger

    I have a 3G ipod touch, and recently bought a mains charger. Although the charger isn't an Apple, it is compatible with the itouch (i checked with around 4 different retailers). As soon as I plugged it in, the touch heated up incredibly, so I unplugged it straight away, and now the touch won't work at all - doesn't reboot, isn't recognised on the PC, won't charge via the computer etc. The retailer admits that the charger is faulty - they've tried in on another ipod and nothing happened at all - but I'm not sure if they will accept liability for my ipod. They are saying I should contact Apple.

    Have you tried the sandard fixes:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Retore from backup
    - Restore to factory defaults/new iPod.

  • TS1702 My cars 2 app mate app is not working after upgrading from ipad to ipad 2...... synced.... uninstalled and re installed several times as well as wiped ne ipad out and re did the whole proccess several times. how can I get this app working?

    I have installed the cars 2 app mate on a ipad 2 from an ipad 1 synced with itunes account.. all is working except this app. After many times of un installing and re installing aswell as talking to apple tech suport this app is still not working.... its there it just has no function...... how can i get this installed and working, my grandson is autistic and uses this app many hours a day........ it is important for me to get this up and running again for him.......

    (1) So, I found a youtube video showing how to open up my iMac and replace a Disk drive. I opened it. I removed the disk drive. I opened the metal cover of the lid of the disk drive. It was clean and immaculate; so, it destroyed and debunked the dirty drive theory. But, just to make sure I sucked around the optical sensor with a vacuum and gently brushed it with a Q-tip.
    (2) I then watched a you tube video showing how the drive operated (it was a drive supplied with power outside an iMac with a transparent cover unlike the opaque metal cover that we have on our drives). My scientific curiosity started to wonder if somehow the mechanical part (of the electro-mechanical assembly) was locked or jammed. So, I started messing with the arms with the utmost care after watching the video to see if i could move them manually. Yes on some. The main arm that is linked with the drive motor was immovable. The rest I played with a little bit, took great notice in the start of the video to see how the arms looked before inserting a disk. I then put it all back together.
    It works now. My guess is that taking it out and then placing it back in along with the resetting options that others have done was the trick. I believe it is a possibility that the hard drive became locked mechanically in some strange manner after ejecting a DVD in conjunction with the uploading of the new OS. I believe the actual removal, reinstallation, and resetting of the drive put everything back into sync. My computer sits in a climate controlled dust free environment. I knew for a fact that this hard drive was OKAY.

  • IPod is not working after being formatted and restored.

    This isn't the first time this has happened to my iPod classic. In a span of about 5 months, I've visited the Genius Bar, and one has been replaced under warranty. Now, the newly replaced one has suffered the same things that the old iPod has experienced. One day, as I was syncing new music, iTunes suddenly froze and had to abort the sync, making me eject the iPod without the sync completing. So, iTunes deleted all of my data (music, photos, videos, etc.). Now, each time I plugged in my iPod following that, iTunes had always frozen, and did not let me access the Devices tab and restore my iPod. Then, having a PC, I formatted it to its default settings, seeing that my computer recognized the iPod and iTunes did not. A pop-up box came up saying if I wanted to fix the problem on the iPod, and I prompted to do so. It completed, and it said my iPod was fully functional. Soon after, it was recognized by iTunes again, and said that it had corrupted files and needed to be restored, seeing that the iPod was under the Devices tab once again. I did so, the restoration was completed, and iTunes said that once after the iPod restarted, it would appear once again under the Devices tab. But, however, it did not appear, after leaving it plugged in for about 5 minutes. iTunes froze again, and now the process begins all over again.
    I have fully updated my iTunes, and I am using an HP Pavillion Notebook, under Windows 7.
    I need help. I don't want to go back to make a reservation at the Genius Bar since the iPod is no longer under warranty, and perhaps I can fix it on my own. Will they  be able to fix it under no charge? What should I do?

    Also, if I eject it from the folder where all Devices are on my computer, the iPod restarts, and the restoration process on iTunes starts all over again.

  • I'm trying to change my apple ID and it says it has been verified, but it still will not change on my phone, so I cannot access my iCloud or iMessage, what am I supposed to do to fix this problem?

    I have been trying to change my Apple ID for my iPhone account because the e-mail on there is an old e-mail that I cannot use anymore. I have went on the website and went through all of the steps of changing it, and I've changed everything to my updated e-mail and verified it as well. On my phone, it still has my old e-mail address, and keeps popping up any time I try to access iCloud, iMessage, etc. that my password or e-mail is invalid. I'm not sure why it's not changing on my phone or what other steps I'm supposed to take in changing it.

    If they are no longer in your camera roll, save them to your camera roll before deleting the account (open your my photo stream album, tap Select, tap the photos, tap the share icon -- box with upward pointing arrow, the tap Save to Camera Roll).

Maybe you are looking for

  • JSP and XML...need help

    hello i have a simple issue i have an xml file with various elements lets say and element named Uni with the values UTS, UNSW, USYD etc and each of the differenet element values have a attribute i.e CourseNo and ListOFSubjects <UNI>      <name>UTS</n

  • Error during installing Adobe LifeCycle Designer

    Hi all, I am trying to install Adobe LifeCycle Designer 8.1 , already downloaded all files from service marketplace. But while running set up,getting below error message: The SAP Front-End Installer executable is unable to process the XML files.Resta

  • Adobe Captivate and DPS/InDesign - Simulations

    Hi, we're working on an elearning/ebook product into which we want to include some practice simulations. (The ebooks are for training on specific software.) I've successfully created the type of simulations we'd want to build (just a simple one for a

  • How pass parameter to a Page

    I have created link (item style : staticStyledText and CSS Class : OraLinkText). I add destination Uri like OA.jsp?page=/oracle/apps/...../webui/xxxPG&partyNumber={@PartyId}&partyName={@PartyName}&retainAM=N when i am checking value in New Page , I a

  • EXS24 off by half-step

    I've been having a wierd problem repeatedly: I will create a region using the EXS24 and it works fine. I save the song and quit logic. When I next return to the song, it opens fine (no error messages). Tracks with other audio instruments work fine, b