How delivery costs will hit after service entry ?

Dear gurus ,
I have a issue that i mention below :
Please find below screen shot :
1st screen the delivery cost is showing, but in the 2nd screen delivery cost is not showing.
screen shot 1 : http://lh5.ggpht.com/_w387jXfUKEE/TKG3PH9_y5I/AAAAAAAAG_g/PlLuWO8joiA/s800/28-09-2010%204-34-07%20PM.png
screen shot 2: http://lh5.ggpht.com/_w387jXfUKEE/TKG3POrH55I/AAAAAAAAG_c/xfgd2JR3H1I/28-09-2010%204-35-17%20PM.png
Kindly guide, how the delivery costs will hit after service entry.
Could you please give me some info ?
Thanks & Regards
Edited by: the_gadfly on Sep 28, 2010 11:51 AM

Hi Shashidhar ,
Set the indicator against ur Mvt Type and try it.
SproMaterials ManagementInventory Management and Physical InventoryGoods ReceiptFor GR-Based IV, Reversal of GR Despite Invoice
Regards
Ramesh Ch

Similar Messages

  • HOW TO SET DELETION FLAG TO SERVICE ENTRY SHEET ?

    Dear Experts,
    Can anybody explain how to set deletion flag to Service entry sheet created ?
    Service Entry sheet has been accepted and saved, i want to set deletion flag to the Service Entry sheet.
    Thanks in Advance

    Hi,
    Go to ML85 and give your service entry sheet no in Entry sheet data and select "cancel release" check box and give the corresponding release code and execute and save. The release gets cancelled.
    The other way is go to ML81N and give your Po and service entry sheet and click on the icon "cancel release" (reverse arrow mark) give the corresponding release code for cancellation and save. Now the service entry sheet will go to "No acceptance" mode. again go to the change mode and select the line item and delete it by clicking on delete icon.
    regards,
    Kannaiah Naidu

  • Unplanned delivery cost will lead to negative value

    Hi everyone,
    i have this issue.  I m trying to cancel an incoice document from MR8M.When i do that i get a message: No m8281, unplanned delivery cost will lead to negative value.
    Can someone help me with this? what do i need to do?
    Regards

    Hi,
    This problem is caused by a program error.
    Refer the notes 1377622, 992146
    You use transaction MIRO "Enter Incoming Invoice" to enter an invoice that has a reference to a purchase order. Based on your Customizing settings, the unplanned delivery costs are distributed to the individual items.
    1. You enter negative unplanned delivery costs on the "Details" tab page. The negative unplanned delivery costs lead to a negative invoice amount.
                  The system does not issue error message M8 281 "Unplanned delivery costs will lead to negative value".
                  Negative invoice values (EKBE-WRBTR, EKBE-DMBTR) are written in the purchase order history. This results in an error in transaction MCE7 "Material Analysis (PURCHIS): Selection".
    2. You post a subsequent credit. You enter unplanned delivery costs on the "Details" tab page. The unplanned delivery costs lead to a negative total invoice amount.
                  The system does not issue error message M8 281 "Unplanned delivery costs will lead to negative value".
                  The negative total invoice amount (the total of EKBE-WRBTR or EKBE-DMBTR) leads to an unexpected distribution of unplanned delivery costs for the next invoice document.
    (SAP Customizing Implementation Guide -> Materials Management -> Logistics Invoice Verification -> Incoming Invoice -> Configure How Unplanned Delivery Costs Are Posted)
    Other terms
    Negative, delivery costs (DLC), bnkan_fw, rewwr, M8 281, rewrt
    Reason and Prerequisites
    This problem is caused by a program error.
    Solution
    The Support Package for Releases 4.70, 5.00, 6.00, 6.02, 6.03 and 6.04 corrects this error.
    Advance correction: implement the correction instructions.
    Header Data

  • Shipment cost delete/change after service acceptance

    Dear Friends,
    After creation of service PO the shipment cost is done and service acceptance is also done,can i change the shipment cost or i have to cancel it and create new document? accounting not done.
    Regards,
    jack

    To cancel service entry sheet follow below steps
    1. Go to ML81N Tcode
    2. enter your service entry sheet number
    3. Go tochange mode
    4. Unrelease service entry sheet by selecting Menupath Service entry
    ->Set Status -> cancel release
    5. Then selct Menupath as Entry sheet -> delete
    This will cancel service entry sheet.
    Next step then VI02 undo cost transfer then you can change or delete the Shipment cost document.Before that check any invoice made against service entry in Purchase Order.

  • Delivery Cost in MIGO of Service PO

    Hi,
    User has created service PO with the freight condition. He created the service entry sheet against the PO. so for each service entry sheet in PO history delivery cost quantity  generated. now he did the MIRO for delivery cost using the full delivery cost quantity with less amount. now he want to do the miro of remaining freight amount but system in not allow to do the miro.
    Please suggest the solution so user can post the miro for remaining amount.

    If you want Hit to freight clearing account, You can make Credit memo to freight venodor with reference of Purchase order.
    If your Goods provider & Transport vendor is same, You can post the Freight charge in Details tab----Unplanned deliver cost while posting Miro.
    Before that, Check The Freight clearing G/L account is availble in system. if not, Please concern with FI consultant.
    Thanks & regrads
    Nitesh

  • How to set deletion indicator to SERVICE ENTRY SHEET

    Dear Experts,
    Please explain, is it mandatory to set Deletion indicator to Service entry sheet before Start of Archiving Service  entry sheet.
    Also explain Procedural steps to set deletion indicator to service entry sheet.
    Thanks in Advance

    Dear,
    First of all Revoke Acceptacne as
    Entry Sheet --> Set Status --> Revoke Acceptance .
    After that you can delete....but no Invoice must be exist.

  • How to make Fields mandatory in service entry sheet

    Dear Experts,
    I need to make  "Quality of Service" and "Service Timeliness" fields mandatory for user entry  in VENDOR EVALN tab during Service Entry Sheet.
    Kindly help..

    Check the note attached to the configuration node.
    + for required (mandatory) field
    . for optional field
    - for hide
    for display
    Double click on the line showing ...+++...
    It will open up a list of fields grouped logically and you now have a radiobutton style way of changing status.

  • Have to cahnge G/L account in Servie PO after service entry sheet posting

    Hi 
    Could you help me with this ?
    “We have created service-order and reception have been made for service order .Now G/L Account was wrong and we want to cancel reception. We try to cancel reception in MIGO- and MBST –transaction, but we got error “Transaction code MBST (=> use transaction ML81/ML85) not defined”
    For transaction ML81 I don’t have authorization, ML85 I do. How should we cancel reception, when we are dealing with service orders (so that we can change right account)?”

    You cannot use MIGO or MBST for cancelling service entry sheet acceptance.
    You have to do so only in ML81N or ML85.
    In ML85, there is an option in the selection screen - whether you want to post acceptance or cancel acceptance. Select the correct option and you can cancel acceptance.
    Lakshman

  • HT201274 how to erase iphone 4s after service has been terminated

    how to erase iPhone 4s content after service has been terminated

    Man I don't know what else you can do.
    you can log into icloud.com, but you can't erase the phone, because you aren't connected to wifi or cellular data.

  • Service PO is getting unreleased after Service entry creation

    Hi All,
    In our scenario user is able to unrelease service purchase order even if a valid service entry exist for it in system.
    I want to know that is there any system message available for restricting the user from unreleasing a po if valid service entry exist.
    Thanks & Regards
    Rashid

    Hi,
    Make changability option as "1" - Cannot be changed in release indicator setting of PO release strategy.
    Then system won't allow you to revoke PO.
    Path  SPRO > MM > PURCHASING > PURCHASE ORDER > RELASE PROCEDURE > DEFINE RELEASE PROCEDURE.
    Regards,
    Sandesh Sawant

  • Impossible to find out what my monthy cost will be after my contract ends

    My contract ends on Saturday.  I've tried online chat twice and phone twice - 2nd phone call was on hold over an hour. NO ONE can tell me what will happen to the price of my Verizon services if I don't sign a new 2 year contract before the current one ends on Jan 17.
    Currently I pay $99.99 for Triple Play, Extreme HD, 75/75 MBs Internet, and Phone. I have an offer on screen that tells me I can get the same deal for 12 months for $119.99, but I can't add it to my cart! 
    If I click the buttons to keep the same package, it's $149.99/month. That's $50 more and nothing to show for it. $1,200!
    While I would much rather get the same deal for the same price, $119.99 isn't looking so bad compared to $149.99.
    The thing is, no one on chat or phone can see the $119.99 price.
    When I ask them what my price will be if I do nothing, I've been told $149.99, $129.99, $124.99, and "I don't know".
    My questions are:
    1.  What will the price be if I don't renew my contract.
    2.  Will I go to a month-to-month plan or will I be locked into a 12-month or 24-month agreement without my consent?
    3.  Why is it impossible to get a straight answer?
    Thank you,
    Kathy

  • How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item

    Dear Experts:
    could you please share with me the knowledge for below topic:
    How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item, because these three objects use three different pricing procedures, and different condition type.
    how did the condition type of service entry sheet know to copy the value of whcih condition type in the pricing procedure of shipment cost document?
    Is this SAP standard function OR there need an enhancement to do that?
    I didn’t find related condition value copy setting in background, could you please share related setting with me? Thank you very much for your kind help!
    Best regards,
    Andy

    Hi, Gopi,
    Glad to see your feedback, but i still have question on your feedback:
    which condition type in the pricing procedure of service entry sheet should know to capture the net value of shipment cost doc? becasue there are so many condition types,
    And i have checked the corresponding condition type (PRSX) of service entry sheet pricing procedure in my SAP system, this is a self-defined condition type, but NO any calculation routine maintained for the condition type (PRSX), how did the condition type (PRSX) know to copy the total cost of shipment cost document?
    Below is the example and another question:
    what the relationship between the pricing procedures at service PO item level and service line item level?
    1. The freight cost in shipment cost document—including used condition type and pricing procedure
    The pricing procedure of shipment cost document
    2. The freight cost in service entry sheet—including used condition type and pricing procedure
    The pricing procedure of service entry sheet--the pricing procedure at service line item level
    3. The freight cost in service PO item—including used condition type and pricing procedure:

  • Shipment cost: number of items in service entry sheet

    Dear Experts,
    Is there a customizing setting that restricts the maximum allowed number of lines in service entry sheets?
    Context:
    Once I transfer shipment costs, several goods receipt sheets and service entry sheets are created.
    I first thought that there was a one-on-one releationship between a shipment cost item and a service entry sheet. I.e. if there are e.g. 7 shipment cost items, than 7 service entry sheets are created.
    The shipment cost distribution level is set on "delivery item": if for one shipment cost item, there are 250 delivery items, the cost is distributed all over these 250 delivery items. For each delivery item, a line is created in the service entry sheet. However, in my case 3 service entry sheets are created with on:
    - 1st service entry sheet: 99 items
    - 2nd service entry sheet: 99 items
    - 3nd service entry sheet 52 items
    Is there a way to avoid that several entry sheets are created for one . In my case that only 1 entry sheet with 250 items is created after transfer.
    Thanks for the help!
    Kind Regards
    Thiago Santos

    If you are not posting the delivery cost on the material value, then use A - Shipment costs item in the item category.
    Delivery sub-item - A shipment cost sub-item will be created for every relevant delivery sub-item.
    Shipment costs item - One shipment cost sub-item will be created.

  • How to Map SRM confirmation Text to Service Entry sheet

    I ran the report /SAPSRM/GET_TEXT_CUST_ERP in SRM and got all the texts to SRM.
    I have also mapped LTXT and TX01 in the configuration.  Still I can't get the text copied to service entry sheet.  Any suggestions.
    Thanks

    Hi experts,
    kindly give me any suggestions ?
    How to capture PO text in service entry sheet accounting document. As of now by default it is capturing service master text.
    Instead of service master text we require to capture po text .
    thanks & regards,
    Raghul

  • Unplanned delivery cost account assignment

    Dear Friends,
    I have configure the transaction key UPF in obyc. Here I have entered Inc/Dec account, but during the MIR7 Simulation, The Unplanned delivery cost is hitting Inventory Account of material.
    Can You please suggest, where the issue may be and how to resolve it.
    Rgds, Kraheja.

    Hi,
    Check the settings in the below mention path
    SPRO--  MM -- Invoice Verification --- Logistics Invoice Verification -- Incoming Invoice --Configure How Unplanned Delivery Costs Are Posted Assign 2 against your company code. It will help you to post in another line item
    reagrds

Maybe you are looking for