How to assign BOM & Routing to Prod Version.

Dear Frndz,
Pls tell me how to assign BOM & Routing to Prod Version.This is to execute the REM flow.
Regards,
Srini

Hi,
Step1. Create Material MM01
Step2. Create BOM CS01
Step3. Create Rate Routing CA21
Step4. In MM02 for the above material, go to MRP4 View and click on production version pushbutton, and give Version Number and description and the validity dates and rem allowd indicator and then double click on the version line, it will take u to another screen, there you Select rate routing and assign the group & group counter in Planning Data and then in BOM Data u enter Alt BOM & BOM Usage details. For rem tick on REM Allowed check box and then click on Check, if all the assignment is OK then it will give you a message saying BOM & ROUTING available. Save the material master.
Regards
Vinod

Similar Messages

Sales Order Costing using prod version

Hi Guru,
My client use MTO and have prod version 1000 & 2000. When I create SO and choose prod.version 1000, prod.order created using BOM/Routing in prod.version 1000, so the prod order cost plan.
But in costing SO, prod version 2000 is use as base in qty structure, it's mean SO plan cost is based on prod version 2000, not 1000.
How the logic of SO costing ? where config to be set in order to get SO costing based on prod version choosen.
Reward will given to any input.
Thanks

You may want to have a look at OKK5 - Quantity structure determination.(QSD)
Choose the Quantity Structure control and double click. Then click on the BOM application. In there, there is section for override alternative selection from material master. There is a check box for production version. whose help reads as
This indicator shows that, when alternatives are selected automatically according to application, the production versions maintained in the material master record are used as selection criteria.
Dependencies
In the MRP view of the material master, in the requirements explosion data, the indicator for selecting alternative BOMs is maintained.
When you explode the BOM, only the alternatives for which selection by production version (2) is defined are taken into account for selection.

How to assign version in sales order and transfer to PP module

Hi all
Users say that customer will require to produce/deliver old goods (we active revision level. The newest material version is D. But customer want version B). How to assign version in sales order and let PP user know the version customer want (MRP run and production order must use version B's BOM)?
Regards,
Rita

Hi,
i have a query if you have implimented ECM this will serve the purpose but it also depends on how good the planning is, in ur client site ( out of SAP ) where planner will plan according to the customer requirement as to which version to be kept active for a date range.The ECO analysts(functional) or consultants will make the ECO changes for those dates.
In general for those type of customers (who needs old version) a different SO created under different document type which will create a production orders with specific order type depending on the assignment of requirement type and requirement class.
those specific production ordertypes can be inturn assigned to either different plant where your old version BOM's will be active.
You need to look into the custom settings in SAP to design the larchitecture to allign with other requirements.What i explained u is common methodology used.
Hope this is clear..
Prakash
Message was edited by:
prakash Uddagatti

Planned order to prod order----order type and prod version/ routing

Hi,
My client produces a material in three different locations. The process at all the locations is same. Each location has the set of same work centers. We have differentiated the workcenters at the three different locations by naming conventions. I am mainting three counters in the routing with different set of work centers.
We want different order types for the production orders processed at these three locations. Also I should be in a position to select the routing/ production version manually for the production orders processed at the three different locations. When I am creating a production order manually, I can select the order type and even the routing or production version.
But here I am converting the planned order to production order. The system is picking the order type as maintained in OPPE. In OPL8 I maintained manual selection of prod version. But version 1 is selected default by the system. Can I have any control over the selection of order type and prod version/ routing?
Thanks and Regards,
Raghu

Dear,
Selection of production version is only possible at manual creation of production order, but not when converting planned order to production order. you can manually change the production version if u want to in the planned order.When you have a planned order it would default contain a valid production version. So system would just take the Production version in the planned order to use the same in Production order. If you want to change the production version in production order then go to CO02-FunctionRead PP Master data and change it.
(Goto OPL8 and select Manual Selection of Production Order in Production Version field
And in MRP4 view of material master select - Selection only by production version as the option for the Selection method field )
Hope clear to you.
Regards,
R.Brahmankar

REM Prod Version: How to hide/disable Storage Location fields

Hi,
We are using REM.
For Issue storage locations, we are maitaining str location in BOM/MRP2 View.
For Receving Str locatiom, we are maitaining str location in MRP2 View.
Similarly, for REM assemblies, system provides str locations fields in Production Version.
Requst to guide on following points:
1. What is the application and priority of Strorage locations in Prod Version (PV)?
2. Can the Str locations in PV be hidden/disabled?
Regards
Nitin

Hi NITIN,
For receiving storage location of finished goods in REM system gives priority for selecting stor loc as below.
Production version (Rec.stor.loc) -> MRP view (prod stoarge loc)
For issue storage location of components in REM system gives priority for selecting stor loc as below.
BOM (issue storage loc) --> MRP view (prod stoarge loc) -->Production version (Rec.stor.loc)
why do u want disable the storage loc at production version.
please close reward and close or else come back for more doubt

How to assign PRT in routing

hi,
   please tell me how to assign PRT in routing.
        Thanks
         Parag

hi friend,
for assigning the PRTs in routing go through following ways:-
1. go in TC CF01
2. enter PRT (spanner.hammer,document,etc (only one)
3.enter
4.save the settings
5.go in routing CA01.
6. click on PRT ( first select the operation to which the PRT is to be assign)
7. click on OTHER
8. fill the requirements
9.enter and save.
hope this solution will solved your problem,
thanks and regards,
sachin.

Make to order with Prod version with object depedency

I m using 2 production version. In both case BOM & Routing having object dependency. Its make to order scenario. How can I select prod version in costing as well in configuration in sales order. Because by default its taking first version for both configuration & costing.How??
And if I select second version in sales order, in prod order it should automatically take second version. How??
Thanks
varun

Hello Varun,
If you have two valid production versions for a part then by default system take the first available production version. You have give some selection criteria through quota arrangement.
In ck11n you have the option for selecting the vesion in the quantity structure tab so i think there will be no problem for costing.
For selection of production version in the production order you have work with planning strategy 82. Or incase of MTO (strategy 20) run MRP from MD50...your assigned production version in sales order will be planned.
If helpful rewards your points
Regards
TAJUDDIN

BOM- Routing- cost estimate

Hello
i want to find out the relationship between BOM - Routing and cost estimate.
i know what a BOM is, not sure how its linked to Routing and its compulsary
to have a BOM and routing to update the costing run with quantity structure?
can someone throw some light on this process and explain the flow.
I have read sap help links but didnt find them very usefull.
for testing purposes i want to update all the cost components manually. I need to have a materila which has all the cost components in the costing 2 tab in MM03
is this possible?
Thanks
Zaid

Hi
Create an LSMW for CK11N and enter the Prod version of your choice in CK11N.. No need to create a BDC...
Ideally, you should create a Proc Alt in CK91N with each Prod Version and Mix ratio in CK94 for such cases.... If you want to release cost with only one version and want the cost of other versions only for name sake, you can maintain the Mix Ration in CK94 as 100 0 0 0 i.e. 100 for One Prod version and 0 for the rest
br, Ajay M

Which bom & routing selection for costing

hi
i have 9 multiple BOM for a finished product and 1 routing.
i want to run CK11 AND CK24 for standard cost estimate.
my problem is that which bom & routing should be considered for std. cost estimate.
for each combination calculated std. price in CK11 is different.
how i should address this issue so that i can calculate std. price

Hi Rajeev,
If you have ( BOMs and 1 Routing that means you have 9 different Production version or not than create it.
Now How system will pick the Production version for Costing.
it Depends on
- Costing Lot size - Costing 1 of Material Master.
Now as per your Costing Lot size system will pick the nearest prod. version.And If there are more than one Production version found which match the costing lot size then it will pick the first one (See the production version sequence in t.code C223).
And depends on that Production version system will pick the BOM and Routing attached to it.
But if you want to run MRP as per your Selection then Select BOM and Routing in Quantity Structuer or Production version in
Costing Data 1 View of Material Master.
It will become default Selection for BOM and Routing for Cost estimate.
Regards,
Dhaval

BOM, Routing and production order

Hello Guru,
we notice something, our material 1256 has maintain four alternative bom as of this date:
Alt BOM       MRP4 Prod version BOM stat       PV lot size Routing Grp    Route Lot
1                          ACA                            02                 0 to 0             5000001            0 to 999
2                          ACB                            02                 0 to 0             5000002            0 to 999
3                          ACC                            02                 0 to 0             5000003            0 to 999
4                          ACD                            01                 0 to 0             5000004            0 to 999
can the difference be of lot size can be a factor why still even though alt BOM 1 with PV ACA was still pick when we do CO01 and CO41 in creating production order? we have already set-up in master data MRP4 tab Selection method = 3 which a expert also advise us to do for those inactive bom material not create a order, but doing this still not solve our problem
and also does in MRP4, under the selection method, INDIVIDUAL/COLL can affect the selection of production version when creating order? what does the following works:
blank = ?
1 = individuals requirements only
2 = collective requirements only
thanks a lot
ryan
Edited by: Ryan on Dec 12, 2008 9:40 AM
Edited by: Ryan on Dec 12, 2008 9:42 AM

Hi Ryan,
- As all the production version containes same Lot size.So system will pick first which system finds in C223.
So each time you will find default selection of Production version ACA in Plan Order and Production Version.
blank = ?
1 = individuals requirements only
2 = collective requirements only
Blank means Individual and Collective both.
What I have observe with this selection is whenever you are going to plan for MTS system will plan with collective requirement and in case of MTO it will plan with Individual requirements.
May be others have some other idea (Actually I also want to verify it).
- No there is no impact of Individual/Collective requirements on Selection of Production Version.
Regards,
Dhaval

MRP run with lot size as per prod. version and capacity levelling

Dear PP experts,
Hi, We are working with strategy 10. For SFG and FG produced inhouse we have created BOM and recipe with production version.
For example:
I have a production version with batch size as 100 Kg.
I load PIR for 500 Kg in MD61.
I have maintained lot size as EX in the material master but I have not defined mini. and max. lot size.
Is it possible during the MRP to consider the production version batch size if the mini. and max. lot size is not maintained in the system and create 5 Planned Order of 100 Kg each.
I know, how it can be done by using lot size in material master or by maintaining schedule lines in MD61 or by maintaining quota. But if nothing is maintained is it possible for the system to create 5 Planned orders as per the production version batch size.
Pl. check if this is possible and revert back.
Regards,
Prashant

Hi
No, system will not consider the size that maintained in the production version for the creation of planned order while the mrp run .
This lost size is used to validate the bom/ routing combiation for the particular pv of the material

BOM Routing - CA02 - Material,Operation Number and PRT Documents - relationship

Hi Experts,
Need some info related to BOM Routing - CA02
I am trying to update multiple - Document , Document Type , Document Part ,Document version - for a operation in CA02 .
All i need to know is how find the relationship between Material and PRT - Document details.
In which table i can find the linkage?
Please share your views.
Cheers!!!
Karthik Rali

Hi
In my opinion, the behaviour is correct....
If you maintained the BOM for FG 1 Qty - Requiring 1 Qty of each component - Then what system did is correct
You should have maintained 1 Qty for Comp 1 and 0.9 of Component 2
Note that, the Qty of Components that you maintain in the BOM relates to the Header Material... and not to the Other Components in the BOM
br, Ajay M

How to assign a task to Reuestor in OIM 11g

How to assign a task to a requestor (who has raised a request for other user).
I created a Task assignment adapter and mapped variable in Process definition as
Map To: Request Info
Qualifier: Requester User Login
Still it returns null and default task is assigning to System adminstrator. I am pasting the Task Assignment code here. User key value coming as Null.
Do you have any idea what is the exact mapping required in Process definition.?? Pls note: I am using OIM version 11.1.1.5.0
public class TaskAssignmentToUserAdapter {
     Logger logger = Logger.getLogger("COM.IDM.PROV.COMMON.ADAPTERS");
     public String getTargetType(String targetType){
          return targetType;
     public String assignTaskToUser(String userKey,tcDataProvider dataProvider ){
          System.out.println("The user key value:" +userKey);
          return userKey;
     }

Not sure what sample code I can give you, but you need to do a query in your adapter like:
select REQUEST_KEY from OIU where ORC_KEY='?'
Here ORC_KEY should be mapped to the process instance key.
Once you have the Request key, you can use RequestServcie APIs to get the requester information. http://docs.oracle.com/cd/E14571_01/apirefs.1111/e17334/oracle/iam/request/api/RequestService.html#getBasicRequestData_java_lang_String_
Or if you don't care then get the requester key from the request table. Thus you can have the final query as:
select USR_LOGIN from USR where USR_KEY=(select REQUESTER_KEY from REQUEST where REQUEST_KEY = (select REQUEST_KEY from OIU where ORC_KEY='?'))
HTH,
BB

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

How to find out Integrated weblogic server version

hi experts,
am using jdev11.1.1.5.0
i h'd big doubt ;)
how to find out Integrated weblogic server version
i think am using weblogic10.1.3. but am not sure?
so how can i found out.
this my log. but i dont see any info about version.
*** Using port 7101 ***
"C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\DevSuiteHome_1\jdk\jre\bin\classic;C:\DevSuiteHome_1\jdk\jre\bin;C:\DevSuiteHome_1\jdk\jre\bin\client;C:\DevSuiteHome_1\jlib;C:\DevSuiteHome_1\bin;C:\DevSuiteHome_1\jre\1.4.2\bin\client;C:\DevSuiteHome_1\jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Duser.timezone="+05:30" -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 17, 2012 5:50:39 AM GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems Inc.>
<Feb 17, 2012 5:50:40 AM GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Feb 17, 2012 5:50:42 AM GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00220. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Feb 17, 2012 5:50:48 AM GMT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log00102. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log.>
<Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<MessageLocalizationHelper> <getLocalizedMessage> The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.
<Feb 17, 2012 5:51:02 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application GeneralLedger is not versioned.>
<Feb 17, 2012 5:51:07 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Rapppdf is not versioned.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00208. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Feb 17, 2012 5:51:27 AM GMT> <Warning> <Server> <BEA-002611> <Hostname "rmsys0061", maps to multiple IP addresses: 192.168.0.161, 192.168.2.161>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.2.161:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.0.161:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 51640 ms.
IntegratedWebLogicServer started.
[Running application frmtesting on Server Instance IntegratedWebLogicServer...]
[11:21:30 AM] ---- Deployment started. ----
[11:21:30 AM] Target platform is (Weblogic 10.3).
[11:21:31 AM] Retrieving existing application information
[11:21:31 AM] Running dependency analysis...
[11:21:31 AM] Deploying 2 profiles...
[11:21:32 AM] Wrote Web Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting\ViewControllerWebApp.war
[11:21:32 AM] Wrote Enterprise Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting
[11:21:32 AM] Deploying Application...
<Feb 17, 2012 5:51:33 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application frmtesting is not versioned.>
[11:21:40 AM] Application Deployed Successfully.
[11:21:40 AM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[11:21:40 AM] http://192.168.0.161:7101/frmtesting-ViewController-context-root
[11:21:40 AM] Elapsed time for deployment: 11 seconds
[11:21:40 AM] ---- Deployment finished. ----
Run startup time: 10812 ms.
[Application frmtesting deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7101/frmtesting-ViewController-context-root/faces/untitled6.jspxhttp://127.0.0.1:7101/console/login/LoginForm.jsp. it stated as weblogicserver 11g admin console
At the botton(copy right section) 10.3.5.0

Hi,
There is one more method,i know
Set the JAVA_HOME and PATH
then execute the
$WL_HOME\wlserver_10.3\server\bin>setWLSEnv.cmd
Go to directory which contains weblogic.jar ($WL_HOME\server\lib) and run below command
$WL_HOME\wlserver_10.3\server\lib>java -cp weblogic.jar weblogic.version
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255
Hope this will be helpful,
Regards
Fabian

How to assign BOM & Routing to Prod Version.

Similar Messages

Maybe you are looking for