How to block goods exit regarding a reservation?

When I reserve all the goods in stock, somebody else still could consume the quantity in stock even though it is reserved by me. Is there a possible way to block the amount of stock which is reserved?
I mean the system should not allow 201 movement when there is already a reservation made for that material in stock.

Various reading suggest following solution
solution 1. check the system messages
go to SE91 check the relavent message - M7 362, and control the same in system message setting*
solution 2. The concerned userexit is MBCF0002 and it would check whether the goods issue was against a reservation or not. If yes, then it would go through. If no, it would check the open reservations which were due for the day and compare quantities. If the remaining stock was not enough to satisfy the reservations, it would give a warning. This was originally made error, then changed to warning when we found that the system prevented emergency issues. Also, people made reservation for higher quantity than required - by mistake in some case and for safety in most cases - just to ensure that they got the required stock even if someone issued out of turn.

Similar Messages

Preventing goods exit more than reservation quantity

Is it possible to avoid goods exit against a reservation, more than the reservation quantity?
I mean, we have reserved 20 units of goods, but it was possible to take 25... Could I prevent this? (Even if there's a free stock)

Go to transaction code OMCQ and change the category of error M7 024 to E.

How to block sale order

Hi
Can anybody clarify me how to block sale order at material level (One sale order for no. of materials). While searching for it got solution using XD05 Tcode which blocks at customer level. For my scenario one customer having more than one material. How to block it?
Regards,
K.V.Manikandan

HI,
Listing and exclusion functionality are used to block customer for particular material which is readily available in standard SAP.Use standard exclusion type B001 and create condition record for all customer material combination for which you want to block the customer,
Path: Spro-IMG-Sales and distribution-basc function-listing and exclusion:
Second way: You can also block particular customer at sales area level by assign 01 at sales org level against field "DChain-spec. status'
This will resolve your problem if you want to block the material for particular customer.
Regards
Jitendra singh

Exit/BADI For Blocking Good Receipt(MIGO0

Hi,
I have requirement ,that if Standard Price(MBEW-STPRS) is equal to zero while doing MIGO , I have to block Goods Receipt. Is there any exit/badi to do it
thanks
Pankaj

Transaction Code - MIGO                     Goods Movement
Exit Name           Description
MBCF0002            Customer function exit: Segment text in material doc. item
MBCF0005            Material document item for goods receipt/issue slip
MBCF0006            Customer function for WBS element
MBCF0007            Customer function exit: Updating a reservation
MBCF0009            Filling the storage location field
MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011            Read from RESB and RKPF for print list in MB26
MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
No of Exits:          8
Reward points if find useful..........
Regards,
Minal

How to block a sales order when there is a free good item .

Hello Gurus ,
How to block a sales order when there is a free good item , only the authorised person should have authorisation to release those blocked Sales orders.
Reason - They want to have a track of free goods given to customer & to avoid the misusing things
Looking for your inputs
Thanks in advance
Regards
Venkat

Hi
I think you can try with Status Profile in BS02 define and assign for item category TANN.
In status profile you can block the delivery and also billing unless some changes the object status as released.
Just try and explore
regards
Prashanth

How to block all goods movements incurs to a warehouse?

Hi all,
I am wondering if you can provide me a way, a transaction code on how to perform the following?
How to block all goods movements incurs to a warehouse.
I am trying to execute LX23 (Stock comparison IM/WM) and try to remove the differences using batch input file.
SAP document indicates the prerequisite to use this feature is that all inventory movements to the warehouse be blocked before clearing the differences (i.e. adapt the IM figure to that of WM figure).
Appreciates.
Daniel

I think the requirement here is to block inventory movement (GR, GI, PCN etc.) to storage locations which are connected to your warehouse. Blocking movement on storage types in your warehouse does not serve this purpose.
Is it really necessary to block inventory movement when running LX2? LX23 eventually will need to correct the stock via IM posting at the end.
Anyway, if storage location level authorisation check is not currently in use in your system (OLMB -> Authorisation Management -> Authorisation check on storage location), you may try to activate authorisation check on storage locations connected to your warehouse so that those who has no M_MSEG_LGO assigned won't be able to post inventory movement to the warehouse.

How to block wrong serial numbers for goods receipt.

"while doing grn via migo t code serial numberes are entered wrongly.
means current serial number is 4 digits 2000,2001,2002,,, but 8 digit serial numbers(20002001) are entered wrongly in migo ,101m type. when i am going to do grn for that materiall it is taking 8 digit serial number
how to block those 8 digit serial numbers? How to continue current serial number series as(2000)"
how to initialize serial numbers for a particular material

This means that you are not mapped as a worker in the system
Go to HRMS resp..create employment...then go to sysadmin user form and query the user for which u want to associate..
then in the person field map the user which u created employment
Then you should be able to access the all the purchasing forms
Mahendra

How to block the creation of a Sales Orders without a linked Purchase Order

Hi. I'm trying to block the creation of a Sales Order that doesn't have a linked Purchase Order. The first thing I did is using the SBO Transaction Notification as follows:
IF @transaction_type = 'A' AND @object_type='17'
BEGIN
     IF (SELECT PoPrss FROM ORDR WHERE DocEntry = @list_of_cols_val_tab_del) = 'N'
     BEGIN
          SET @error = 1
          SET @error_message = 'Purchase Order Missing...'
     END
END
This works good. I create the Sales Order, I tick the purchase order field on the logistics tab, I click Add, and then the purchase order window appears...
Then, the problem begins... If I click the Cancel button, the purchase order is obviously not created, but the Sales Order is created.
Can someone tell me how to block the creation of the sales order If the user press the cancel button on the purchase order window (and the purchase order is not created)
As far as I can see, after clicking the add button in the sales order document, the Sales Order is created on the DB. If there's no way of blocking the creation of the Sales Order, can I avoid closing the purchase order window by the SBO_TransactionNotification? (if the purchase order has not been created)
Thanks...

Hi Yail,
I think you can't close the purchase order with the stored procedure.
Try to catch the Event when the user click on Cancel button.
So you can list the vents with event logger : https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ede3be37-0e01-0010-1883-cd1b5293473e
You can block the cancel button and force the user to create the purchase order.
Hope i help you
Best regards
Michael

How to block a material that not to creation of service notification thru-IW51

Hi All,
I have tried in all over areas ( MM02 level and MM06 level ) to block a material that not to create service notification with that material but didn't get a solution.If any one knows solution for this kindly provide me.
"How to block a material that not to create a service notifcation thru IW51?"
Best Regards,
Narendra Konnipati

Narendra,
1. I do not see any possibility without using this exit. It is a very simple and effective thing for your ABAPer and you too.
2. In case of many Materials-Notification type combinations, you can maintain similar code by joining several elseif s.
3. Alternatively, you can maintain a Z Table as under:
QMART
MATNR
S3
10000000099999
S3
10000000099988
S1
10000000088988
S2
12000000088988
Means, for every Notification type there will be one or more prohibited materials. The coding will not be difficult, but will have around 15/20 lines.Finally, if you have to get your issue resolved, I feel this is the way and also easy way through your ABAPer.
Tell me in case of any further opinions.
Best of Luck
KJogeswaraRao

Blocking goods receipt based on unprinted purchase order

Hello,
I want to block goods receipt based on purchase order that hasn't been printed yet. How can I do it? Thanks.

Hi,
I dont think In standard setting you cannot acheive this.
First maintain print immediately while saving the application in condition record.
Please provide the list of P.O's which you are investigating in ME9F, provide the application as EF and Processing Status as 0 (Not processed)
This way, you will get the whole list of P.O's which have not been printed out, please note that outputs can only be processed on successfully released Purchase Orders.
Show this to your technical team. They can develop a report using the same logic used above by the report and validate the PO as PO listed in the above report.
and use exit in MIGO to validate.
I have not tried this, I think you can achieve the requirement with help of technical consultant.
hope it helps
sBk
Edited by: Sujithbk on Dec 27, 2011 12:09 PM

How to block invoice posting for quality reasons

how to block invoice posting for quality reasons.For example while doing Goods receipt the material is posted to quality inspection stock. Then the material is rejected for some reasons. Once the decision is made then the standard system allows to post invoice. But I want to restrict invoice posting once the material is rejected for quality reasons.

posting of invoice is always allowed, the only thing you can restrict with customizing of QM in Procurement is the payment.
if you want to block invoice posting, then you have to control this in a user exit.

How to Create Menu Exit

Hi,
Please tell me steps for how to create Menu Exit. Please Help me

MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
There are 'only' 177 Menu exits in standard - I couldn't see the right one, too.
But you could search the implemented exits, this should be only a small number. Go to transaction CMOD, enter * and F4, information system (F5), show all selections (Shift+F7) and then you can restrict to search only menu exits.
Of course there is the possibility, that these are added in a different way...
... at least you can be sure, if it's a normal menu exit.
Check this sap help..
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.sapbrainsonline.com/TUTORIALS/default.html
You can achieve this functionality by configuring in IMG.
Please find the info regarding User-Exit's in the following links:
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec07a25db911d295ae0000e82de14a/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
Re: doubt on user exits
user exits and Badis
User exits is the enhancements provided by SAP
You can use them in transactions. Each transaction will have user exits.
If you want to use your own requirements by making your coding while the transaction is run you can use user exits.
For example if you want to run the MRP in MD02 specific to MRP controller you can user exit.
Please also refer the document below.
USEREXIT
Userxits allow us to add our own functionality to SAP standard program
without modifying it . These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
All Userexits start with the word USEREXIT_...
FORM USEREXIT_..
z..
ENDFORM.
The problem lies in finding the correct userexit and how to find it if one exists for the purpose. Once the correct userexit is found the necessary customer code is inserted in the customer include starting with the z.. in the form routine.
e.g. USEREXIT_SAVE_DOCUMENT_PREPARE
Certain application like SD still provide this form of enhancement using userexit but this practice is no longer being followed for newer extensions instead they are using EXITs which come bundeled in enhancement packages . Neverthiless existing USEREXITS will be supported by SAP an all the newer versions of SAP.
HOW TO FIND USEREXITS
Userexits can be found in number of ways:
1) To find userexits in SD module , goto object navigator(SE80) and select
development class from the list and enter VMOD in it. All of the userexits in SD are contained in the development class VMOD. Press enter and you will find all the includes which contain userexits in SD for different functions like PRICING, ORDER PROCESSING etc. Select the userexit according to the requirement and read the comment inserted in it and start coding .
Some examples of userexits in SD(SALES & DISTRIBUTION ) are:
1)ADDING OF NEW FIELDS IN PRICING
In Pricing in SD the fields on the basis of which pricing is done are derived from the FIELD CATALOG which is a structure KOMG .This structure is used to transfer transaction data to the pricing procedure in SD and is also known as communication structure.This structure KOMG consists of two tables KOMK for Header related fields and KOMP for item related fields. The fields which are not in either of the two tables KOMK and KOMP cannot be used in pricing .Sometimes a need arises when the pricing is to be based on some other criteria which is not present in the form of fields in either of the two tables. This problem can be solved by using USEREXITS which are provided for pricing in SD. Pricing takes place both when the SALES ORDER ( Transaction VA01) is created as well as when INVOICING ( Transaction VF01) is done.Hence SAP provides 2 userexits ,one for sales order processing which is
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
Depending upon which table (KOMK or KOMP) the new fields were inserted we use either of the above two userexits.These userexits are found in include MV45AFZZ of the standard SAP sales order creation program SAPMV45A.
In the case of userexit which will be called when invoicing is done ,these
are provided in the include RY60AFZZ which is in the standard SAP program SAPMV45A. The name of the userexits are same. i.e
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
These userexits are used for passing the data from the communication structure to the pricing procedure, for this we have to fill the newely created field in the communication structure KOMG for this we fill the code in the above userexit using the MOVE statement after the data that has to be passed is taken from the database table by using the SELECT statement. The actual structure which is visible in these userexits and which is to be filled for that particular field is TKOMP or TKOMK.
Before the coding for these userexits is done ,it is necessary to create a new field in either of the two tables KOMK or KOMP .For this purpose includes are provided in each of them .
To create the field in header data(KOMK) the include provided is KOMKAZ
and to create the field in item data(KOMP) the include provided is KOMPAZ.
One possible example for the need of creating new fields can be e.g. Frieght to be based upon transportation zone ,for this no field is available in field catalog and hence it can be created in KOMK and then above userexits can be used to fill the transportation data to it.
2)The other method of finding userexit is to find the word USEREXIT in the
associated program of the transaction for which we want to determine userexit using SE38.
3)The other method of finding userexits is to find the include in case of SD/MM applications where the userexits are located ,this can be found in the SAP reference IMG generally in the subfolder under SYSTEM MODIFICATION.
Some other examples of userexits in SD are:
USEREXIT_NUMBER_RANGE
This userexit is used to assign a different internal document number to the
sales order(VA01) when it is created depending on some criteria like a different SALES ORGANIZAION(VKORG) .
USEREXIT_SAVE_DOCUMENT_PREPARE
This userexit is used to insert the ABAP code which will be called when
the document (sales order VA01) is just about to be saved.This userexit is used generally for custom checks on different fields , to display some information before the order will be saved or for making changes to certain fields before the sales order will be saved.
Exits & Enhancements
There are mainly six types of EXITs in sap which have been collected in the form of enhancement packages and attached to standard code in SAP.
These are different from USEREXIT in the way that they are implemented
in the form of FUNCTIONs while in USEREXITS we use form routines for their implementation. These are also sometimes known as function exits .
These start from the word EXIT_ followed by the program name and then followed by a three digit number.
e.g. EXIT_SAPMV45A_002
This exit is found in SD in enhancement V45A0002.
TYPES OF EXITS
1)MENU EXITS
2)FUNCTION EXITS
3)TABLE EXITS
4)SCREEN EXITS
5)KEYWORD EXITS
6)FIELD EXITS
We use SAP transactions CMOD and SMOD to manage exits. Before implementing an exit , it is required to create the project by using CMOD
selecting the enhancement e.g. V45A0002 and selecting the component
(one which fulfills our need) i.e the exit which will be implemented in SMOD and after coding has been done the project has to be activated.
An exit can be coded only once.
FUNCTION EXITS
These are used to add functionality through ABAP code . These start from the word EXIT_programname_NNN ending in a 3 digit number. No access code is required to implement any tupe of exit including function exits.
The function exits are called from the standard SAP program in the form
of ABAP statement
CALL CUSTOMER-FUNCTION 'NNN'
This is in contrast to USEREXITs where PERFORM statement is used to call
the required userexit.
To implement the FUNCTION EXITs first of all the project is created and a suitable enhancement package is selected and from its compnents the function exit to be implemented is selected and on double clicking it the exit code will appear in ABAP EDITOR(se38) where a Z include will be found and the customer code should be entered in this include.
e.g.
ADDING A DEFAULT SOLD-TO-PARTY in Sales Order Creation
To show a default sold-to-party in this field when the user creates a sales order (VA01) we can use a function exit .This function exit is located in enhancement no V45A0002 . Before we can choose the exit we have to create a project in CMOD after that enter V45A0002 in the enhancement field and click on the components . In the components you will see the exit EXIT_SAPMV45A_002 . This exit is used for our purpose.
Double clicking on this exit will takes us to function builder (SE37) . This
function exit has one exporting parameters and two importing parameters, we are interested in exporting parameter which is E_KUNNR of type KNA1-KUNNR i.e if we move the desired customer name to this structure(E_KUNNR) it will be shown in the field as the default value when we create the sales order. This function also contains a customer include ZXVVA04 . This include will be used to write our custom code .
Double clicking on this include and it will prompt us that this include does not exists do you want to create this object ,select yes and the include will be created .In this include we can write our own code that will fill the field E_KUNNR.
e.g. E_KUNNR = 301.
Activate the include and Activate the project. Now when ever the SALES ORDER will be created , sold-to-party field will come up with a predefined customer .
FIELD EXITS
The field exits are managed,created,activated through program RSMODPRF. The field exit is associated with a data element existing in ABAP dictionary and hence to the screen field using that data element.
The format of field exit is :
FIELD_EXIT_dataelement_A-Z or 0-9
If a particular screen and program name is not specified than the field exit will effect all the screens containing that data element.
The function module associated with field exit shows two parameters
INPUT and OUTPUT. Input parameter contains the data passed to the field exit when the field exit was invoked by the R/3 , We can write our own code to change the output parameter depending upon our requirements.
Before the field exit can have any effect the system profile parameter
ABAP/FIELDEXIT in all the application servers should be set to YES
ABAP/FIELDEXIT = YES.
Reward points Please ...

How To Block Movement Type

Dear Experts
How to Blocked Movement type to do any movement .
which field in OMJJ for blocking the Posting of Any movement
Rgds
Pankaj Agarwal

Hi,
Inform your basis personnel to modify the authorization object -
M_MSEG_BWA Goods Movements: Movement Type
To ensure that the field BWART does not contain the movement type which you want to block. This will ensure that users will not be able to use this movement type.
Hope the above answers your query.
Regards,
Vivek

How to Block the GRN,

Dear Experts
How to block the GRN, to avoid the excess inventory for the particular material.

Hi Raja
I assume that you are referring to stopping GRN of goods with resepect to the PO qty
In that case If you want to stop the GR of more goods than the quantity ordered, you can use delivery
tolerance settings in either material master data or purchase info record data.
Regards
Vikrant

How to block mac address in 2800 router

sir
how to block mac addresses in cisco 2800 router

Hi,
To block mac addresses you can simply create Mac based ACLs which ranges between
700 to 799
Example:
access-list 700 deny xxxx.xxxx.xxxx.xxxx
access-list 700 permit yyyy.yyyy.yyyy.yyyy
now you can apply it on interface:
int f0/0
access-group 700 in
exit
Regards,
Rahul Chhabra
Network Engineer
Spooster IT Services

How to block goods exit regarding a reservation?

Similar Messages

Maybe you are looking for