How to bring back deactivated depreciation area in AS02

Hello,
Accidentally, we deactivated one depreciation area in AS02 and saved it. Do you know how to bring it back? Thanks in advance.
Regards,
Peter

Hi Peter,
Please let me know that can you not able to activate in AS02. I mean is it shows in Display mode after changed the Flag.
Regards,
Venkata Raju

Similar Messages

  • How to bring back deactivated depreciation areas in AS92

    We deactivated 6 depreciation areas in AS92 for 1 asset.  How can we bring them back?  Thanks!

    OAYZ is to change activate/deactivate depreciation areas for the asset class.  In AS92, I can deactivate depreciation area for a particular asset but how do I reactivate the depreciation area that I deactivated in AS92?  THanks!

  • How to update the New Depreciation Area in Asset Master Data

    Hi,
    Please guide me
    How to update the New Depreciation Area in the Asset Master Data.
    Regards
    Srinivas

    Hi,
    a) The procedure is as follows:
    1. Create Depreciation area via OADB.                                                                               
    2. Activate Depreciation area via OAYZ.                                                                               
    3. Automatic opening of new depreciation are via AFBN and program  
       RAFABNEW :                                                                               
    3.1     Indicator: Leave values initial = not ticked.           
               Do not set this indicator if you want the system        
               to copy the values from depreciation area 01.                                                                               
    3.2     Indicator: Leave values initial = ticked.               
               Set this indicator if you want to open the newly created
               depreciation area without any values i.e. blank.                                                                               
    4. Recalculate depreciation via AFAR and program RAAFAR00.   
    b) Helpful notes:
    430618 (Procedure for setting up new depreciation area)                           
    301113 (Restrictions of RAFABNEW)                                                 
    421549  (RAFABNEW: Error with closed fiscal years)
    c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
    regards Bernhard

  • How to 'force in' the Depreciation Area for an Asset after it was created

    Hi,
    When I created an new asset under a new asset class, I forgot to set-up the depreciation area for that class. Now after I have saved/created the asset, I get this error : No depreciation areas have been defined for asset 1012500000-0. How do I 'force-in' the depreciation area now after it has been setup.

    try and read docu to tcode AFBN
    (if your problem is in production, consult SAP-OSS)
    A.

  • How to bring back the black dot on the red close button for edited/unsaved files?

    I've ticked the box for "Ask to keep changes when closing documents" System Preferences / General. I'm operating within Mac OS 10.8.4 (Mountain Lion).
    When I make changes to an open file in most every program, a black dot appears on the red close button in the top-left corner of the file's window. This convention goes back a decade to early Mac OS X, as I recall.
    However, I don't see this behavior in a few applications lately, such as Xcode 4.6.3 or QuickTime Player 10.2.
    Anyone know how to bring this functionality back?
    Thank you.

    Nobody knows? Not even administrators?
    Please it would be really nice to have help on that to take all the benefit of the remote app.
    Thank you very much in advance.

  • How to correct the derived depreciation area balances (Group Assets)

    Hi SAP Gurus....
    Due to some wrong configurations for one derived depreciation area (Group Assets) values have not updated in that derived depreciation area and related group assets. Now how to update the same APC values in derived depreciation area and Group Assets from already posted APC values in real depreciation areas.
    Thanks in advance.

    Hi All
    Any Comments.................

  • How to bring back the messages overview?

    Since I made the last update for Mavericks I can't see the conversations overview anymore. this is how it looks like:
    and it should look like this:
    How can I bring back this overview? on my airbook I made the update as well and there it looks fine.
    thanks for the help!

    Hi,
    The windowing info should be held in com.apple.ichat.plist
    In the Finder > Go Menu hold down the ALT key and select the Library that appears.
    Navigate to the Preferences folder
    Find com.apple.ichat.plist and drag it to the Trash (will delete it)
    Restart Messages.
    10:00 pm      Sunday; November 3, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Deactivated depreciation area & new GL

    Hi together,
    We are using release ECC 6.0 with activated new GL (ledgers 0L and N1)
    Although you deactivate a depreciation area which ist liked to N1 (trx. AS01), SAP creates entries in this ledger (e.g. trx. F-90).
    Thanks for any help

    Hi Peter,
    Please let me know that can you not able to activate in AS02. I mean is it shows in Display mode after changed the Flag.
    Regards,
    Venkata Raju

  • How to bring back an email that separated and flew off screen before finished?

    I had an email almost completed and the curser didn't move the screen up, so I tried to move the screen up by putting mouse on the bright blue line on the right side of the composed email. What happened was where the curser was pushed all the words up and off the composition without the blue line being moved. I cannot find the word anywhere and really have not idea where they are. They didn't go into the draft so I could bring the composing email back up. This never happened before and not sure why the blue line froze or didn't correspond when I tried to move it making 2/3rds of the email composed.

    Sorry, that is not a Firefox issue. You should contact your provider.
    Have you looked at your desktop to see if the file is there?

  • Mail window pane vanished - how to bring back?

    In Mail,
    When in the Inbox, there is usually a small list of emails (sent to me that perhaps i haven't read) at the top and if I click any of them I get the preview or email in text at bottom of screen below it (divided by a line).
    My wife was reading emails and scrolling down on the right, and somehow Mail quickly set itself to only have the emails (sent to me) only appear and now i have to double click any single email to see the email (which pops up in a new window).
    In other words, I believe the technical way to explain it is that the window pain on the bottom is no longer there. How do I bring it back to the way it use to act - do I need to selecting something from the "view" menu at the top?

    Hello,
    There is a spot in the middle of the bar at the bottom of the Mail window that is used to hide or reveal, or dragged to resize the message preview pane. Depending on your display resolution, you can see that this spot is actually multiple lines.
    Although not fully applicable to Mail 2.x and OSX 10.4, the following support document does provide a picture of this spot on the separator bar (which now you have at the bottom):
    http://docs.info.apple.com/article.html?artnum=25502
    This same out-of-date article is found as a link in the current Mail Help if you search with Preview Pane.
    Ernie

  • How to bring back project to iMovie project window?

    I created a project and want to edit more later days. Meanwhile I moved the project file to another hard drive to make more space on the original hard drive.
    When I open iMovoe the title of file is showing, but no content. How can I bring the project back to iMovie project window?

    First, move the Project back to the Movies/iMovie Projects folder on your Mac. In other words, move it back where it was to begin with.
    You should now see it in iMovie and be able to edit it, unless the Event folders were moved as well. If they were moved, move them back to Movies/iMovie Events.
    Now, you can move them back to the external drive and have them still work, but you need to do this from within iMovie.
    Your external drive must be formatted as Mac OS Extended (journaled). FAT 32 or NTFS drives will not work.
    In iMovie, click VIEW/EVENTS BY DISK. Your external drive should show up in the Project Library and in the Event Library in iMovie.
    To move the Project back to the external drive, hold down the Command key while dragging the icon for the project to the icon for the external drive in the Project Library.
    If you want to move the Events as well, you can right click on the Project (which is now on the external drive and select Consolidate Media...

  • How to get back windows that are off screen?

    I use my macbook at work with one attached display, and then at home with a different attached display. The two extra displays are different sizes. A lot of times when I plug it into the smaller of the two displays, some of the windows come up off screen and I can't figure out how to drag them back on. For example now I have a Microsoft Word window where the bottom half is on the screen, and the top half is up above the top of the screen. The only way I know to move a window is to grab the top edge and drag it, but the top edge is off the screen so I can't do that.
    Also sometimes a window is bigger than the screen height, and the only way I know to make it smaller is to drag the bottom right corner, but the bottom right corner is off the screen and the window height is bigger than the monitor height.
    Is there a way to get these windows back all the way onto the screen? Thanks.

    This is one of the most serious flaws of the Macintosh, and in many instances there is just NO answer. You could resort to writing a script using the Script Editor, but this seems a tough way to get round what is essentially a bug in the OS - it has been there for over 20 years and I don't think Apple are about to realise that the age of multiple screens and changing screen sizes is here NOW and it is time to change so we can resize from any border like all other modern OSs.
    If you want to try the script approach - try this link for help:
    http://www.transparen.com/macintosh-technical-support-group/window-offscreen

  • How to bring back status bar when opening Excel doc mail attachment?

    I have an iPad updated to 6.1.3.  When I open up an Excel document from mail it opens the attachment fine and the status bar across the top with the 'Done' option to close the doc appears then disappears altogether after a few seconds giving you full screen access to the file.  No problem there, but bringing it back to be able to close the document is tricky.  Tapping along the top works only sometimes....I haven't been able to find a consistent way to bring it back to close the document.  I can slide down across the top to bring up the notification center but tapping across the top to bring the bar back to close the file will only work after playing around with it for about 20 touches or so.  Is there a trick to this or a way to keep the status bar there?  Thanks in advance!!

    Then quit the mail app completely and reboot your iPad, then try again. What we are describing is the way that it is done. Your mail app might be just acting a little hinky now.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • How to bring back its original cursor.

    Before the original cursor or arrow is small and i chaned to make it bigger but now
    I want to bring it back to its original to small one but I forgot it. Can you help us.

    System Preferences --> Universal Access --> Mouse (& Trackpad)
    Adjust slider next to "Cursor size".

  • Pismo Dieing, how to bring back

    I have a beautiful Pismo that's served me well and now it won't boot. It started a few months ago with periodic not responding while I was working on it. I took out the 256 MB memory in the attic to see if that helped, and that did. I just got a HW test CD in the mail today and three runs of the long test say the remaining memory is fine.
    BUT, a few days ago, it wouldn't start (no event I know of is associated with this). It would go to the grey apple, and spins, and then to the blue but never get to the blue waving bar and "OS X" splash. Since then, I've reformatted the HD with zero-fill in OS 9, then reformatted in OS X to HFS non-journaled. Now it won't restart still. It gets to the splash and stop half way through (the blue even stops shimmering the opposite way as most apple progress bars do).
    One thing is that it never did the "welcome to OS X" thing. Not sure if that matters. Also, I'm waiting 10 minutes for the boot, so if it's slow, it's real slow.
    Any tips?
    OS 10.4.9, 256 MB (with one memory card out), 10 GB HD that came with the thing.
    I'm happy to replace parts if people are reasonably confident of a diagnosis.

    Paul:
    (1) where's the SMART status
    While booted from the install disk, lauch Disk Utility.
    Select HDD (Manufacturer ID) in sidebar
    S.M.A.R.T Status is at the bottom of the main panel along with other information about the disk.
    (2) is the original drive shipped with a Pismo likely to have it?
    Not the original Hard Disk Drive, but on the Disk Utility on the installer disk.
    (3) why buy $100 of software to save a $50 (replacement from OWC) drive.
    Good question. If it were to save the disk, it is an open question. However, these utilities will not save the HDD as hardware. Their function is to repair the directories in the formatted volume on the HDD. This can be very important if you have directory issues, as you can repair them, secure your data and continue using the computer. In addition, I use both DW and TTP at least monthly to check and repair the directories on my computer. I have my entire HDD backed up, but the information on my computer is important. I have over 70 GB of information, and would hate to lose it. Regular maintenance procedures can avert what can become disastrous consequences.
    Note the difference between the Hard Disk Drive which is hardware, and the formatted volume on the HDD, which contains electronic instructions called directories, for storing, organizing and maintaining your data.
    Please don't hesitate to post back with further questions or comments.
    Good luck.
    cornelius.

Maybe you are looking for

  • Exporting Crystal Report in PDF

    Post Author: amumahajan CA Forum: Exporting Hello guys, I'm trying to export a .rpt file into PDF. The exporting works fine without any problem. However, there is only one problem. Report has a time-based chart and the date format i want to show is d

  • Entry missing in but_hier_type?

    Hi All We are trying to replicate customer hierarchies (created via VDH1N) from ECC to CRM. I followed the steps in the SAP help: http://help.sap.com/saphelp_crm70/helpdata/en/a1/2bfc3f37c2e569e10000000a155106/content.htm In CRM download (RSA3) the D

  • To store Reports in Blob fields

    Hi, I need to generate report(PDF) and to keep it in a Blob field. Somebody has some idea? Thanks

  • Best way to move securities from one Active Directory (AD) to another ?

    Hi experts, We are currently moving all our employees from several Active Directories (AD) to a Global active directory (GAD). So user accounts and all our BPC securities set up will keep being the same. Only the active directory has to be changed. W

  • There is a strange small gear like circle on the black screen of my ipod touch 3g

    The ipod is unresponsive, is fully charged and this strange circle (looks like a little gear) is in the center of the screen, I've never seen this before and I don't know what to do to fix it, does any one know why it did this or how to fix it?