How to configure structured material

when I try to post material with movement type 319 by MB1B, system showed to me 'Movement type 319 can only be carried out for structured material'. Please tell me how to configure structured material? it is better to provide more detail information.thanks,

Hi
I can see the question has been in the forum for quite sometime, but I would like to provide input perhaps to enable you to close it. Structured material based on my experience only applicable to IS-Retail. It is meant for gift pack that contains a few articles in it. Since you log this question in this forum, I would assume you dont have IS Retail. Perhaps you should consider other mvt to solve the problem that you are facing right now.
cheers
kamal

Similar Messages

How to configure this material type We will treat it as consumable goods?

Dear Experts,
How to create new material type which we will treat as consumable goods?
Also, for all purchase, we want to have the GR Non-valuated checked so that the actual cost will not have effect after goods receipt but will be effective when the invoice has been entered. No inventory will be used. We will treat it as other consumable goods.
For GR Non-valuated, it means the actual cost will not happen in goods receipt only.
we will create po and gr and invoice and payment. can you tell me what we have to pay attention to ?
Best Regards,
Merry

you can use material type UNBW, because its having non valuted ticket and quantity updation also not there, and you can do PO, GR, Invoice and payment as a normal process, but the only difference is when you do GR the value of that GR is immediately charge out to an account or cost center including quantity. but you will do the MIRO to clear GR/IR account.
regards,
qsm sap

How to read configuration structure (SD)

Hello,
i've to read the whole configuration structure of an SD-order item, which isn't expanded to sub-positions. Means: the material in item 10 is an BOM head-material and a KMAT. The materials in the multi-level BOM are configured via the configuration of the head material. If you press the "Configuration" button in the SD-sales order, you see the whole configuration structure. Does anybody know how i can read the whole structure from the database if i know only the SD-order and the item number?
Thanks,
Richard

use FM to get config, you'll have to pass cuobj there.
call function 'CUCB_GET_CONFIGURATION'
   exporting
        instance                     = vbap-cuobj
   importing
        configuration                = z_instance_tab
   exceptions
        invalid_instance             = 1
        instance_is_a_classification = 2
        others                       = 3

How to configure Material Master

Dear Guru,
May I know how the steps to configure material master?
Thank you.
Rgds,
Goh Yen

Hi,
Follow the below steps for customization of material master
1. Material Number:
SPRO -> Logistic - General -> Material Master -> Basic Settings -> Define Output Format of Material Number
TCODE: OMSL
2. Define Field Reference:
SPRO -> Logistic - General -> Material Master -> Field Selection -> Maintain field Selection For data Screens
T CODE: OMS9
3. Define Industry Sector:
SPRO -> Logistic - General -> Material Master -> Field Selection -> Define industry Sectors and industry -sector- specific Field Selection
T.Code:OMS3
4. Material Type:
SPRO -> Logistic - General -> Material Master -> Basic Settings -> Material Type ->Define attribute of material Type
T.Code:OMS2
(Select Material Type: ROH for ur raw material( example) copy it and renamed it to UR RAW MATERIAL)
5. Define Screen Sequence:
SPRO -> Logistic - General -> Material Master -> Configuring the Material Master -> Define structure of Data Screens for each Screen Sequence
T.Code:OMT3B
(Select Screen Sequence: 21, copy it and renamed it to Z with any letter( Like ZA or ZB )
6. Ordering Screen Sequence:
SPRO -> Logistic - General -> Material Master -> Configuring the Material Master -> Maintain Order of main and Additional Screen
T.Code:OMT3R
7. Assign Screen Sequence to Industry Sector:
SPRO -> Logistic - General -> Material Master -> Configuring the Material Master -> Assign Screen Sequences to User/Material Type/Truncation/Industry Sector
T.Code:OMT3E
8. Assign Field Reference to Plant:
SPRO -> Logistic - General ->Material Master -> Field Selection -> Define Plant -Specific Field Selection and Plant -Specific Screen Selection
T.Code:OMSA
9. Define Material Group
SPRO -> Logistic - General -> Material Master -> Setting for Key Field -> Define Material Group
T.Code:OMSF
10. Define Number Range of Material:
SPRO -> Logistic - General -> Material Master -> Basic Settings -> Material Type ->Define Number Range for each Material Type
T.Code:MMNR
11. Define Purchasing Group:
SPRO -> Material Management->Purchasing->Create Purchasing Group
T.Code:OME4
Regards,
Biju K

How to configure new account assignment group of material

dear expert
how to configure new account assignmnet group of material
vicky

how to configure new account assignmnet group of material
Probably, the question should have been how to create Account Assignment Group for a material.
Go to IMG SD => Basic Functions => Account Assignment/Costing => Revenue Account Determination => Check Master Data Relevant for Account Asignment.
There select Materials : Account Assignment Groups and create as per the requirement and save. Now you can see the same while creating the material master.
thanks
G. Lakshmipathi

How to configure Material Ledger?

Does anybody knows how to configure material ledger? Please give me details on how to configure. Please and thank you.

Hi,
Here you need to define the valution method in t.code"OB59"
then you need to assign the GL like forex gain and fore loss accounts in t.code"OBA1", now if you think there is difference then you can valuate in t.code"F-05".
Hope understood and you can reward if you are cleared.
Thanks,
Vasu..

How to configure QTY per TON overhead rate for Output material

Hi,
Kindly advice me how to configure Per TON overhead rate on Output material?
Thanks
Supriya

Hi Supriya,
Whethere the system is calculating Overhead on the basis of Input Raw Materials or on the basis of Output Materials, completely depends on the Cost Element what you assign in the "Base Row".
If it is to be on Qty Consumption of Raw Materials, then, you need to assign the RM Consumption GL Account in the Base Row. If it is to be on the Output Quantity produced, you need to assign the GL which you created for External Settlement (22 category).
*Note: SAP only accounts for input materials and activities with units of quantity for quantity-based overhead that are updated in CO. Assigning the Output Qty GL will help you only for Actual Overhead calculation.*
Pls revert back for further explanation...
Srikanth Munnaluri

How to copy documents from SOLAR02 configuration structure into Solution

Hi,
in SOLOA02 we have stored our cross scenario configuration in the solution structure on top level node 'configuration' as described in the help 'Implementation and Upgrade Projects'->'projects'->'configuration'->'Edit cross scenario configuration'.
During hand-over from project to support I want to copy the information stored under configuration into our solution directory (TC SOLUTION_DIRECTORY). In the solution structure there is no top level node 'configuration'. Only 'Org Unkits, Master Dtaa, Business Scenarios, Interface Scenarios, Systems, Servers.
Can I customize the default solution structure and add the missing node? Is there another way to copy the documents?
Best regards,
Peter

Hi Peter,
the only way to relate the configuration structure from a project to a solution is via a maintenance project. You need to assign a maintenance project to your solution (on the solution settings tab). This will create a solution node in the maintenance project. You can now copy the configuration structure from your implementation project to the configuration structure underneath the solution node of the maintenance project.
Best regards,
Michael

Hi all anybody can contribute on how to configure Freegood for 3 items

HI all,
Can anybody share how to configure 1 free good for 3 items.Ex: When we purchase A,B&C items system should give D as a free good.
Thanks in advance,
Ram

hi
there are constraints for free godds scenario
1> Free goods are currently not supported with material structures like product selection, BOM, variants with Bom selection.
2>only supported on a 1:1 basis
3>only supported with sales orders with document category "c" not for quotation etc
4>are not currently supported for deliveries without reference to sales orders
5>are not supported for make to order production, third party scenario,and scheduling agreements
regards

How to use Structures of Variant Configuratin in BAPI_QUOTATION_CREATEFROM2

Can any one help me by telling How to use Structures of Variant Configuratin in BAPI_QUOTATION_CREATEFROM2
the structures are :QUOTATION_CFGS_REF, QUOTATION_CFGS_INST, QUOTATION_CFGS_PART_OF, QUOTATION_CFGS_VALUE.
What the necessary parameters to be passed ?
Thanks,
Mohan

Ankur,
I change the Structure Scope to B and Application SD01, but it seems conflict with the config strategy and variant matching. So, in VA21, material can't be determined by system automatically through choosing characteristics. System expands all the material of the top material. Like this:
AA
Aa
aa
ab
Ba
ba
bb
Are there some mistakes in my Item Category configuration?
Thanks.
Edited by: wayne wu on Jun 21, 2011 4:41 AM

[Forum FAQ] How to configure a Data Driven Subscription which get multi-value parameters from one column of a database table?

Introduction
In SQL Server Reporting Services, we can define a mapping between the fields that are returned in the query to specific delivery options and to report parameters in a data-driven subscription.
For a report with a parameter (such as YEAR) that allow multiple values, when creating a data-driven subscription, how can we pass a record like below to show correct data (data for year 2012, 2013 and 2014).
EmailAddress                             Parameter
Comment
[email protected]              2012,2013,2014               NULL
In this article, I will demonstrate how to configure a Data Driven Subscription which get multi-value parameters from one column of a database table
Workaround
Generally, if we pass the “Parameter” column to report directly in the step 5 when creating data-driven subscription.
The value “2012,2013,2014” will be regarded as a single value, Reporting Services will use “2012,2013,2014” to filter data. However, there are no any records that YEAR filed equal to “2012,2013,2014”, and we will get an error when the subscription executed
on the log. (C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles)
Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportParameterException: Default value or value provided for the report parameter 'Name' is not a valid value.
This means that there is no such a value on parameter’s available value list, this is an invalid parameter value. If we change the parameter records like below.
EmailAddress                        Parameter             Comment
[email protected]         2012                    NULL
[email protected]         2013                     NULL
[email protected]         2014                     NULL
In this case, Reporting Services will generate 3 reports for one data-driven subscription. Each report for only one year which cannot fit the requirement obviously.
Currently, there is no a solution to solve this issue. The workaround for it is that create two report, one is used for view report for end users, another one is used for create data-driven subscription.
On the report that used create data-driven subscription, uncheck “Allow multiple values” option for the parameter, do not specify and available values and default values for this parameter. Then change the Filter
From
Expression:[ParameterName]
Operator   :In
Value         :[@ParameterName]
To
Expression:[ParameterName]
Operator   :In
Value         :Split(Parameters!ParameterName.Value,",")
In this case, we can specify a value like "2012,2013,2014" from database to the data-driven subscription.
Applies to
Microsoft SQL Server 2005
Microsoft SQL Server 2008
Microsoft SQL Server 2008 R2
Microsoft SQL Server 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

For every Auftrag, there are multiple Position entries.
Rest of the blocks don't seems to have any relation.
So you can check this code to see how internal table lt_str is built whose first 3 fields have data contained in Auftrag, and next 3 fields have Position data. The structure is flat, assuming that every Position record is related to preceding Auftrag.
Try out this snippet.
DATA lt_data TYPE TABLE OF string.
DATA lv_data TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename = 'C:\temp\test.txt'
CHANGING
    data_tab = lt_data
EXCEPTIONS
    OTHERS   = 19.
CHECK sy-subrc EQ 0.
TYPES:
BEGIN OF ty_str,
a1 TYPE string,
a2 TYPE string,
a3 TYPE string,
p1 TYPE string,
p2 TYPE string,
p3 TYPE string,
END OF ty_str.
DATA: lt_str TYPE TABLE OF ty_str,
      ls_str TYPE ty_str,
      lv_block TYPE string,
      lv_flag TYPE boolean.
LOOP AT lt_data INTO lv_data.
CASE lv_data.
    WHEN '[Version]' OR '[StdSatz]' OR '[Arbeitstag]' OR '[Pecunia]'
         OR '[Mita]' OR '[Kunde]' OR '[Auftrag]' OR '[Position]'.
      lv_block = lv_data.
      lv_flag = abap_false.
    WHEN OTHERS.
      lv_flag = abap_true.
ENDCASE.
CHECK lv_flag EQ abap_true.
CASE lv_block.
    WHEN '[Auftrag]'.
      SPLIT lv_data AT ';' INTO ls_str-a1 ls_str-a2 ls_str-a3.
    WHEN '[Position]'.
      SPLIT lv_data AT ';' INTO ls_str-p1 ls_str-p2 ls_str-p3.
      APPEND ls_str TO lt_str.
ENDCASE.
ENDLOOP.

Please help me how to check a material does existed group code in system (w

Hi all,
Please help me...
I have inputted quantity for tx MC 94 but when I input them into tx MC94, I met a message " Structure not yet maintained for this conbination characterstics". Step by step to show a error message as below:
Step 1: Launch MC 94
step 2: Enter Planning
Step 3: Enter Prod.Code. Material (ex: enter material code :0101010260008, this code is existed Prod.Code )
Step 4: Click on "Inactive Version " button
==> A error message is showed.
Please help me how to check a material does existed group code in system (which table to check it)?
How to record the message" Structure not yet maintained for this conbination characterstics" to catch up it in my program?
Thank in advance.

Karenloria,
1. Check in MC8C, which Infostructure is used for Planning type "Planning" or the one you are entering in the intial screen of MC94.
2. Using transaction MC63 for the infostructure identified in step 1, check the planning hierarchy maintained. If this product is not maintined maintain using MC62.
You can also check using SE16 transction the current infostructe records(Plan) for the table name = infostructure identified in step 1.
Regards,
Prasobh

How to configure quality process with batch management.

Dear Friends,
we have a scenario,our client receive goods with 101movement type into quality inspection stock.
once stock is passed quality check stock,then we will take into unrestricted stock with 321 movement type.
failed in quality test will be rejected.please give me suggestion how to map the scenario.while i am testing
the process in my sandbox,its asking batch number.its not allowing me to post unrestricted stock with 321
movement type.how to make batch as optional in this scenario?if batch is mainted for the material,how to
configure the process.we are not using QM module.
please suggest me.
Regards,
Varun

In Batch management config in Logistic general, Check for the movement type 101 & 321 whether batch creation has been activated to Manual, Automatic, or no creation. In your case it looks like for mvt 321 batch creation is set to manual & for 101 no creation.
if batch creation is set to manual, enter a manual batch no & proceed.
But to cross verify wheter 101 has generated batch or not please check the stocks in MMBE.
Hope this helps.
Regards
Mithun

How to configure bulk breaking articles in SAP retail

hi frnds...
This is my client needs...
How to configure bulk breaking articles in SAP retail for hyper market..
Scenario is like this... Ex: for MEAT
There should be a Parent article & child articles process.
i.e Chicken X - 100 corcoss is divide into child articles (A,B,C,D,E,F) like
Brest bone - 5kg     - A
leg pieces - 2.5kg   - B
wings - 2.5kg         - C
P - 7.5kg                 - D
Q - 10kg                 - E
R - wastage - 50kg - F
these child articles wont consider for inventory
So how to configure this scenario in SAP Article master & to run this process.
Pl help me out with scenario

Please have alook at
[http://help.sap.com/erp2005_ehp_03/helpdata/en/2b/b03889df3611d1953b00a0c930e0da/content.htm]
Material type WERT is correct.
In Material type maintenance you can control at all if a store will be value only inventroy managmenet or both.
Further in the Site master WB02, you can control it on MC level.
regards
B

How to configure sales forcast and assign marketing budget

how to configure sales forcast and assign marketing budget

Hi,
As per my knowledge i am telling forecasting is done by Historical Data { MM & PP Module }
when you collect the data based that we have to plan every month how much you want to procure the raw material etc..,
that should be entered in the material master under "Forecasting" tab there we have to maintain monthly wise forecasting values
i think it should get some idea if i wrong please clarify
Regards,
Prasanna

How to configure structured material

Similar Messages

Maybe you are looking for