How to find atp category of planned order in APO

Hello experts,
I have to change planned order ATP category in APO system. Is that category stored in any database table?
I'm using /SAPAPO/OM_ORDER_CHANGE to achieve this, but I want to know current ATP category of order before changing it.
Thanks in advance!
Kind regards!
Emanuel

Hello Emanuel,
The planned order ATP categories in APO are
AI PlOrd. Planned order (not firmed, unconfirmed)
AJ PlOrd. (F) Planned order (firmed, unconfirmed)
AK PlOrd.(NC) Planned order (not firmed, confirmed)
AL PlOrd.(CF) Planned order (confirmed, firmed)
Not sure whether you are asking how to find out the ATP category within the SAPAPO/OM_ORDER_CHANGE .
Regards
Gk

Similar Messages

  • Multi - item planned order in APO

    Hi
    In the MES multiple knife positions are possible in a single pattern. How to create a multi item planned order in APO based on the knife positions in the pattern? When the conversion indicator is set in APO the planend order need to be converted in to multi item production order in R/3. Please help how to configure the same in APO.
    Thanks in advance.
    Regards
    Dhaiva

    Hi,
    Are you using this for trim interface ?
    If yes, you need to use Template PDS/ppm for the same.
    For more info, you can have a look at SAP note 919080.
    Let me know if this info helps
    cheers
    Ram

  • How to Overrride ATP values during sales order creation

    Hi all,
    How i override ATP values during sales order creation.
    The scenario is that we need to migrate open orders from an existing legacy system to SAP.
    While migrating these orders, we need to make sure that dates on the schdule lines are same as they are in the old system. Hence we need to override ATP.
    Any suggestion welcome..
    Regards,

    Hi Kantur Shekar madhuri,
    Would you confirm the whether in your schedule line category is activated for "Product Allocation" or not.
    if not please activate and re run your scenario.
    Regards
    Arun

  • How to find print preview for purchase order like what we find in va03

    hi guru's
    how to find print preview for purchase order like what we find in va03
    let me share ur information
    thank u

    Hi
    You can see the Print Preview/printout etc using the Transaction ME9F for Purchase Order
    Execute the ME9F tcode and execute you will get lot of PO's select any Po and press display message
    you will see the print preview
    Similarly for RFQ output use the Tcode ME9A
    for Contrat use ME9K
    for GR output use MB90
    Reward points for useful Answers
    Regards
    Anji

  • How to find system status for production orders?

    How to find system status for production orders?
    looked into table AUFK, AFKO and AFVC but none of these tables, carry
    system status as part of the fields(STTXT)
    I tried to filter in COOIS, but not much help
    Able to find system status information in COHV,Is there any other way where
    I can find system status information for production orders
    Kindly guide

    Hi,
    Look into table, JEST, JSTO, AFPO & AFKO. CAUFV filed OBJNR, TJ02T filed ISTAT.
    But, it is very difficult to combine the details like Order and System status.
    Take the help of your ABAPer to generate Report for you.
    Regards,
    Siva

  • ATP Rule for Planned Orders

    Hi Experts,
    I have configured the ATP rule for Planned Orders. So I only want to check the component stock and Production Orders when running ATP check for the Parent Material.
    In OPJJ, I only selected the following options.
    Include Safety Stock : Ticked
    Check without RLT : Ticked
    Incl.production orders : X (Take all production Orders into account)
    No other options or boxes have been selected
    Also I have included the relevant Checking group in MRP 3 for the Parent Material (Checking Rule has been assigned to that Checking Group in Config) and also maintain the Plant Parameters for MRP (assign the checking rule to the plant)
    So, For an example :
    Parent : A
    Components : B and C
    Parent Material A has only 5 Planned Orders starting on same day 20.05.2014 each qty 5
    Components B got stock 300
    Components C got stock 1
    When I ran ATP Check for the Parent material A using COHV, qty 1 has been allocated to all the planned orders as committed. Why is this happening ?
    I also checked in CO09 for the Component Material C, and it says ATP Qty is only 1. I expected the system would allocate that stock 1 to one of the Orders but it seems to be not working as I expect.
    Any explanations will be much appreciated and will not hesitate to avoid the points.
    Kind regards,
    Ishara

    Hi DB49,
    Appreciate your reply. Please see the following comments.
    Right now I have been assuming that you have performed an availability check manually for one of the planned orders, and you got the same results (overconfirmation).  Please confirm.
    Yeah I have performed for one order and it gave me the same result.  Also, when I perform for the 2nd Order, it allocates the quantity.
    OK, basic things you should already have checked:
    You have maintained the checking rule for planned orders (OPPQ or OPPR)
    You have maintained the ATP group for the materials (OVZ2)
    You have assigned the ATP group to the Material Master of the components (MM02)
    You have maintained the scope of check according to the rules you mentioned earlier (OPPJ).
    You have no planning strategy in the component material that would have invoked a special ATP.
    I checked everything apart from point 2 (OVZ2). I have maintained that via MRP Group and that MRP Group has been linked to Master Data (MRP 3)
    Really appreciate your support in this.
    Kind regards,
    Ishara

  • How do I maintain storage location for Planned Orders in APO

    Dear all,
    Can you help us in maintaining storage location for planned orders in APO. The storage location from material master need to be updated in product master of APO and the same shall be automatically picked from product master during Supply Network Planning run.
    Material master CIF is live.
    We have got the following content error in CIF consistency check. How ever this is nt goging to harm any thing, but we would like to maintain in both R/3 and APO.
    Error:
    Plant and storage location in SAP APO: 2004
    Plant and storage location in SAP R/3: 2004 FGPA
    Thanks in advance
    Ram Mohan Rao Kolanupaka

    Instead of maintaining additional master data, i would rather use CCR user exits to switch off comparison of planned order at storage location level if the APO storage location is blank. This way you would not have to make changes to PPMs everytime a new scale out of the solution happens.
    In SE18 check the user exit /SAPAPO/CIF_DELTA3 (interface RELEVANT_FOR_COMPARE_ORDHEAD)
    If it is not possible to switch off this comparison then I guess changing master data is the next step. Do explore with a developer though about the first option.

  • How could I re-explode planned order in APO?

    Please adivse me how could I re-explode planned order in APO?

    Hi,
    Go to the planned order in the change mode, again adopt the source of supply and save.
    or you can use the PPDS heuristics "SAP_PP_021" New explosion to explode the orders.
    Thanks,
    nandha

  • How to delete Planned Order in APO

    Hi,
    How can I delete planned orders in APO? I already tried //RLCDELETE but it says "Order not in live cash" but I can see the order in //RRP3.
    Let me know if you know another TCODE for this.
    Thanks
    David

    Hello David -
    Please use /SAPAPO/DELETE_PP_ORDER to delete planned orders.
    thanks
    Varun

  • How to Find  Credit Check Released Sales Orders /Deliveries?

    Hi Gurus,
       How to Find Credit Check Released Sales Orders /Deliveries for a particular Customer.
    Regrds,
    Binayak
    Message was edited by:  Binayak
            Binayak Ghosh

    Hi,
    You can chech inthe Tcode VKM2 Released SD documents, and VKM4 SD documents.
    reward if useful
    Regards
    syed

  • Read the characteristics of a planned order in APO

    how can we read the characteristics of a planned order in APO.What Function Module can be used for this?
    how can we manually schedule the order activities based on the characteristics. Can we use the function module 
    /SAPAPO/OM_ACT_SCHEDULE by copying and making some changes in it for this purpose?

    Hi,
    if there are any orders in your system with characteristics (in planning version 000) then this report will find them:
    report  get_char.
    data:
       ls_genp     type /sapapo/om_gen_params,
       lt_orderid  type /sapapo/om_orderid_tab,
       lt_char     type /sapapo/om_charact_val_tab.
    ls_genp-simversion = '000'.
    call function '/SAPAPO/OM_ORDER_GET_ALL'
      exporting
        is_gen_params = ls_genp
        iv_simsession = ''
      importing
        et_orders     = lt_orderid.
    call function '/SAPAPO/OM_ORDER_GET_DATA'
      exporting
        is_gen_params       = ls_genp
        iv_simsession       = ''
        it_order            = lt_orderid
      importing
        et_charact_val_acts = lt_char.
    Best regards
    Thomas

  • Correlation of reservation with Planned order in APO.

    Hi,
    In R/3 in COGI we see reservations. my issue is I want to know for which planned orders in APO these reservations are.
    In the product view in APO we can see some reservations (PRDRES(W) - correct me if I am wrong). How to correlate these reservations with planned orders. I am looking in PP/DS module of APO.
    Thanks a lot in advance,
    Prabhat

    Hi Prashant,
                      You are correct and if product is showing the reservation then it is mean for all order in product view.
    You can check the Production Planning Table inside PPDS for wider view of reservation and orders.
    /n/sapapo/ppt1
    Check the SAP Note: SAP note 439596
    SAP Link is also useful:
    http://help.sap.com/saphelp_scm50/helpdata/en/64/dca63be2bc331be10000000a114084/content.htm
    http://help.sap.com/saphelp_scm50/helpdata/en/c1/147a375f0dbc7fe10000009b38f8cf/frameset.htm
    Let me know if it is sufficient.
    Regards,
    Vishal

  • Unable to see planned order in APO

    Dear Experts,
    I'm creating a Project manufacturing order in ERP. After that I do MRP run in SCM7.0. When I check in Product View (transaction /SAPAPO/RRP3), I do not see any planned order, though I can see orders in ERP (Tcode-md04).
    I guess transfer of network to APO is not happening.
    Same problem arises when I schedule a dummy project in ERP and after I do MRP run in SCM7.0, I do not see any planned order in planning board.
    The MRP run in SCM7.0 shows no error and no warnings and everything appear in green.
    I was able to see planned orders in APO before there was system upgrade from SCM 4.2 to SCM 7.0.
    Please provide some clue to solve this problem.
    Regards,
    Jyoti

    Hi Jyoti,
    There will be an "Iterate" button on the left hand corner in the result display of CCR.  Please click on this button so that these errors will get iterated and goes to the respective distinations.  After this, you go to smq1 and smq2 trasnaction codes of R/3 and clear all the queues.  Similarly you clear the queues in smq1 and smq2 transaction codes of APO.  Afterwards, check whether you are able to see the planned order.
    Please confirm
    Regards
    R. Senthil mareeswaran.

  • Deletion of Planned Order in APO PP/DS

    Hi All,
    I have a question on PP/DS ( IS-Auto ). Suppose if we are deleting the planned orders in APO so what will happen to the concerned PDS. I want to preserve the PDS so that we can use them later.
    If we delete the Planned Orders then will the PDS be also deleted ?
    Thanks,
    Prabhat

    Prabhat,
    Think of a PDS the same way you would think of a Production Version in ECC.  It is master data, and one or more of these can be assigned to a Material/Plant combination.
    http://help.sap.com/saphelp_scm70/helpdata/EN/4d/01be3d1abbe913e10000000a114084/frameset.htm
    A Planned order is Transactional data.  Creating/changing/deleting a Planned order has no impact on PDS Master data.  During the creation of a planned order, the system reads the PDS info, and copies selected bits of this master data into the Planned order.  At this point, then, certain parts of the planned order data can be changed.  Such changes generally do not affect the underlying master data.
    http://help.sap.com/saphelp_scm70/helpdata/EN/49/d565caf54535f5e10000000a42189c/frameset.htm
    Best Regards,
    DB49

  • How to read or change the planning book in APO ???

    Hi all ,
        can anybody tell me how to read or change the planning book in APO
      Regards,
      Tarang Shah

    Hi ,
    you can use the follwing BAPI
    BAPI_PBVARS_GETDETAIL to read the planning book
    BAPI_PBVARS_CHANGE_KEY* to change the planing book
    thanks and regards ,
    Ashok kumar

Maybe you are looking for