How to get Docupresentment IDS 2.5 installed using MSMQ on Windows Server 2012 working?

The test command threads.bat reqtype=sss display=yes is hanging. Verify that the Oracle Docupresentment Watchdog Server is running.

The threads.bat reqtype=sss display=yes command actually finished after several minutes with an error "fail to retrieve response message...". The problem was in the security setting of the input/output queues. Whoever executes the above command needs to have proper permission to the queues.

Similar Messages

How to install Sticky Notes in Windows Server 2012 R2

I want to install Sticky Note in Windows Server 2012 R2. If this app is not available in Server 2012 then which is the
best "Sticky Note" application for this platform.
Thanks

Here are instructions for 2008 -
http://www.win2008r2workstation.com/sticky-notes/ I'm not sure about the legality of that, as I think Microsoft has some rules in their license about copying files from one distribution to another. You would need a lawyer to check on that.
Otherwise, a simple Bing search will turn up freeware apps you can download.
.:|:.:|:. tim

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

How to install device cals on Windows Server 2012 standard edition

Hello i have a windows server 2012 standard edition licence that i have taken on rent from an ISP.
i have created a domain controller on that.
By default only two users can use remote desktop to the server simultaneously.
My Requirement is 20 users can use remote desktop to the server at the same time.For that i have purchased 20 Delive CALs licences like volume licencing.
i have the licence number noted on the paper.
do i need to install remote desktop services first etc ?
Could anyone guide me step by step how can i install or configure so that 20 users can use remote desktop on the same time.

Hi,
Any update about the issue?
I would agree with others, you need to install Remote Desktop Services Client Access Licenses.
There are three methods by which you can install Remote Desktop Services client access licenses (RDS CALs) onto your license server:
• Install Remote Desktop Services Client Access Licenses Automatically
• Install Remote Desktop Services Client Access Licenses by Using a Web Browser
• Install Remote Desktop Services Client Access Licenses by Using the Telephone
https://technet.microsoft.com/en-us/library/cc725890.aspx?f=255&MSPPError=-2147217396
Then you can install both Per User and Per Device CALs onto the same license server.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can't get past OCX error when installing ODAC 11g on Windows Server 2003

I have been trying to install ODAC 11g on Windows Server 2003 and can't get past the OCX error when registering oravsdbgeng11w.dll. I've read every message on this forum even remotely related to this problem and tried every solution offered. I have done a clean install into a new Oracle home, and made sure Instant Client is always included. All service packs and automatic updates have been installed. For what it's worth I have successfully installed ODAC 11g on Windows XP Pro.
If anyone out there has been able to get this up and running and would care to share the wisdom that would be greatly appreciated.
Thanks!
Michael Young
Latitude Geographics
Victoria, BC

Michael, as you already noticed, every time I have seen this issue it has been because ODT was being installed into an Oracle home where no client exists, or perhaps installed into an old oracle home where the client was an old version (eg Oracle10), or the client was broken. Usually though, the user unchecked the instant client checkbox during the ODAC install.
So you say you checked instant client and you still got the error? That doesn't add up...
Are you using 32-bit windows? If you are using 64 bit windows be sure to tell us.
Why don't you try avoiding using instant client at all, in case it is somehow not getting installed properly.
You can do this as follows:
1) Under the download links on OTN, go to the database download page.
2) Download the Oracle Database client 11g for Microsoft Windows
3) Run this installer and Install ODP.NET 1.x and 2.x into a new Oracle home from this client install, but nothing else. If ODP.NET is not listed there (it has been a long time since I looked at that) than just install a minimal Oracle client install.
4) Close the installer
5) Go back and install ODAC and this time choose "Oracle Server" radio button during the install (rather than the client install)
6) Install ODT and ODP.NET at least and be sure they are being installed into the Oracle home created in the first steps above.
This will avoid use of Instant Client and will hopefully avoid the OCX error. Let me know if this solves your problem.
Christian

Install 2008 R2 on Windows Server 2012

Hi,
I am trying to install SQL Server 2008 R2 SP1 on Windows Server 2012 Datacenter.
However, I get below warning when running setup.exe:
"your version of microsoft sql server (2008 and 2008 r2) isn't compatible with this version of windows"
How do I find what prerequisite I need?
Thanks

Hi,
Apologies for very late response. SQL Server 2008 R2 is x64 and Windows Server 2012 Datacenter is x64.
When I try to install SQL Server I get this...
I click 'Run the program without getting help' and all looks ok...
Any ideas?
Thanks!
As you can see all rule check is fine you can move ahead.I usually get this message during installation but installation never fails
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Installing Exchange 2013 on Windows Server 2012 R2

Now that SP1 has been released, it is supported to run Exchange 2013 on Windows Server 2012 R2
But since it is not yet possible to download Exchange 2013 with integrated SP1 (slipstreamed), is the following installation procedure supported:
- Install Exchange 2013 (without SP1) on Windows Server 2012 R2
- Install SP1 on top of Exchange 2013
If this is not supported, can someone tell me when the Exchange 2013 with integrated SP1 (slipstreamed) download will be released?

yes the SP1 is the full product. if you need step by step instruction to migrate to this new version you can get info here : http://buenoflex.com/install-exchange-2013-sp1/
Arnaud Buonaccorsi - GSX Groupware Solutions
http://www.buenoflex.com
http://www.gsx.com <= The monitoring solution for Exchange and Sharepoint

Sharepoint 2013 - Error installing pre-requisite on Windows Server 2012 R2

I have been trying to get my Sharepoint 2013 installed on windows server 2012 R2. I was never able to get past the pre-requisite installer. It keeps failing at "Configuring Application Server Role, Web Server (IIS) Role" and was never able to get
past that.
In the last 3 days i tried almost all of the suggestions posted in various forums but was never able to get it work. Any insight in to this error and resolution is greatly appreciated.
Tried all things explained here but didn't work
KrisS

I voted for the SharePoint 2013 isn't supported yet link. I spent 4 hours resolving the issue. In my installation, there were many claims by the installer that the application server role is corrupt or unavailable. I dove deep into the installer files and
found 1 file that was not in the correct place. I am not going to mention it, because it is the reason the installer should fail.
Downloading and installing sharepoint 2013 sp1 was the answer. Why? Because Windows Server 2012 R2 was my operating system. Windows Server 2012 R2 was not a supported type of installation for SharePoint 2013 until SharePoint 2013 SP1 was released.
I hope this helps those whom have ben in dire need. Even though Paul was initially correct in his statement, the release of SharePoint 2013 sp1 opens doors.
@Microsoft, as a former PFE I think you could have done better.

Not able to install studio + controller on windows server 2012 r2

Hi,
i have installed windows server 2012 R2, now i want to install windows HCK 2.1 with controller + studio option but i am not able to install because that option is grey. what additional settings i have to do in order to successfully installation
of WHCK. please guide me.
ankur dubey

Hi, see the
Windows HCK Getting Started.
Note:
Controller isn't supported on Windows Server 2003, Windows Server 2008, Windows Vista®, Windows XP, or Windows 2000.
Controller isn't supported on an installation that has already been set up as a domain controller.
Controller isn't supported in a virtual PC or any third-party Hypervisor environment.
Greetings
Nino
...esistono i motori di ricerca, facci un salto e troverai molte delle risposte che ti darò io.

Install sharepoint 2013 on Windows server 2012, Microsoft Identity Extensions issue !!!!!!!!!

Sharepoint 2013 comes with prerequisitesinstaller.exe to install the software required for the actual Sharepoint installation.
I 've installed Windows server 2012 in the R2 edition as well as Standard edition, but installing the prerequisites ends with an issue for the Microsoft Identity Extensions (MIE) on both versions (screenshot).
The 2012 R2 server has been updated with all latest files by executing Windows update.
In case of the Server 2012 R2, MIE is already installed , but somehow the Sharepoint installation is missing something.
I al;so tried removing default install to let prerequisiteinstaller.exe to install it's own version, but that did not help.
When I skip the prerequisites remaining items, the Sharepoint installation stops directly , requesting the missing items.
I've tried several Sharepoint server installation files, including the 180 days free version.
Screenshots will be uploaded after my account has been checked......

Hi Jay,
Installing SharePoint Server 2013 on a computer that is running Windows Server 2012 R2 could lead to unexpected behavior, therefore, Microsoft does not support SharePoint Server 2013 in Windows Server 2012 R2.
SharePoint Server 2013 with Service Pack 1 and SharePoint Foundation 2013 with Service Pack 1 will offer support for Windows Server 2012 R2.
Refer to:
SharePoint 2013 Support for Windows Server 2012 R2
In addition, as Dave suggested, for the sharepoint server issue, please post in the dedicated forum for a better response.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unable to install Device CALs on Windows Server 2012 after OS Reinstall

Due to a hardware fault we had to reinstall Windows Server 2012. I have activated the Terminal Services licensing Server but I am unable to install Device CALs that we have purchased.
The error is as follows:
"Remote Desktop Services Licensing is unable to process your request. Make sure you provided correct information. If the problem persists, try other methods of activation. Error code is 800"
I tried contacting technical support over phone - they are also unable to resolve the issue.

Hi, thanks for response.
I contacted Clearing House over phone and provided them with all the details regarding authorization
number(s), license number(s) et al. However they also mentioned that there is some technical error from their "tool" and directed me to Technet Forum.
I shall try the Hotfix

Is it ok to install Exchange 2013 on Windows Server 2012 Standard?

Hello everyone,
I'd like to know if it is ok/safe to install Exchange Server 2013 on Windows Server 2012 Standard?
As I started doing some research and noticed a page where Microsoft states they don't recommend running Exchange on Server 2012 Standard, and recommend making 2 different servers one for Active Directory and another for Exchange.
On that page they also listed some features that wouldn't work in case of Exchange is running on Server 2012. And that it may put a larger data load if setup this way.
I am hoping someone knowledgeable can explain and tell me if it is safe to use such setup or if it is better to use something like SBS 2011 Standard instead, which has Exchange included?
Has anyone installed Exchange 2013 on Server 2012 Standard successfully and used it for more then several months without problems?
Also just to give an idea on my background, I've been in IT field fairly long but haven't really updated to newer versions much and mainly used SBS 2003 and 2008 only with a few clients so haven't used 2008 too much.
Thanks in advance.

Few things to note.
There is
NO SBS in 2012
All you need is a Std edition of Windows for Exchange 2013, as there is no difference in features between Std and Datacenter as far as Exchange is concerned.
For 10 users, you can have one box with both AD and Exchange. It is not MS recommeded, but it IS supported.
Rajith Enchiparambil |
http://www.howexchangeworks.com |

Unable to Install Oracle 12 on Windows Server 2012 R2

Hello:
I have attemted several times to install Oracle 12c Release 1 on a Windows 2012 R2 server but it fails during the Net Configuration phase. I've the log file but I am not able to dicern anything of value from it.
Any help will be appreciated.
Venki

user9023421 wrote:
Srini:
As per Oracle Database Quick Installation PDF, " Windows Server 2012 x64 - Standard, Datacenter, Essentials, and Foundation editions" is supported.
venki
This is for R1, not R2
Which version are you installing on ? R2 is currently not a certified OS
HTH
Srini

How to allow more than two users on remote desktop on windows server 2012 foundation?

i have a dell server power edge T300 with windows server 2012 foundation. I am unable to connect more than two remote desktop at once.

Hi,
Add to Brain, you cannot have more than 15 user accounts in Windows Server 2012 Foundation.
In order to access a hosted application, such as Microsoft® Office, a license for Windows Server 2012 Remote Desktop Services is required for each user account (not to exceed 15 user
accounts) that directly or indirectly uses RD Gateway to host a graphical user interface, including using Remote Desktop Connection (RDC) client. When using Remote Desktop Services, you may not install or use Remote Desktop Connection Broker or Remote
Desktop Virtualization Host role services. For more information about Remote Desktop CALs , see http://go.microsoft.com/fwlink/?LinkId=140238.
http://technet.microsoft.com/en-us/library/jj679892.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

How to enble trackpad gestures during a remote dekstop session to windows server 2012

Hello, do you know a trick to enable trackpad gesture as, swype, double touch and so on duringa remote dekstop connection to windows server 2012? because it only recognise the physical mous click,ù and it really annoying.
thank for help

Hi,
Add to Brain, you cannot have more than 15 user accounts in Windows Server 2012 Foundation.
In order to access a hosted application, such as Microsoft® Office, a license for Windows Server 2012 Remote Desktop Services is required for each user account (not to exceed 15 user
accounts) that directly or indirectly uses RD Gateway to host a graphical user interface, including using Remote Desktop Connection (RDC) client. When using Remote Desktop Services, you may not install or use Remote Desktop Connection Broker or Remote
Desktop Virtualization Host role services. For more information about Remote Desktop CALs , see http://go.microsoft.com/fwlink/?LinkId=140238.
http://technet.microsoft.com/en-us/library/jj679892.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

How to get Docupresentment IDS 2.5 installed using MSMQ on Windows Server 2012 working?

Similar Messages

Maybe you are looking for