How to increase parallel jobs for TA SGEN

Hi all,
we did an SGEN load for an AIX ApplServer and a LinuxAppServer to know, which load has a longer runtime.
We saw, that the linux server has more than twice than the AIX server ... But we also noticed in joblog, that
AIX had 37 parallel jobs for sgen und linux only 20 ...
I don't know, where to configure, that linux also uses 37 parallel jobs for sgen ...
I found an notice in help.sap, that perhaps TA rz12 could help me, but how !?
Kind regards
Andreas

Hi,
SGEN uses the configured quota for asynchronous RFC. Do the following:
RZ12 => select group "parallel_generators" (probably the group already exists, otherwise create it and assign to the instance(s) you wish to participate in this group)
For each instance that is a member of the parallel_generators group:
- Double-click on the entry
- The relevant quota are "Max. Number of WPs Used (%)" and "Minimum Number of Free WPs". The first is treated as a percentage of the number of DIA processes. The second indicates how many DIA processes must be kept free.
Save the changes you make.
Example: assume that an instance has 20 DIA processes and you configure "Max. Number of WPs Used (%)" = 50 and "Minimum Number of Free WPs" = 5. This means that SGEN will start 10 parallel jobs (50% of 20 processes), unless so many DIA processes are busy on other activities that the number of free DIA would fall below 5.
Hope this helps,
Mark

Similar Messages

How to increase page size for balance file upload in Workspace.

Hi All,
Please suggest how to increase page size for balance file upload in shared Workspace pages.
Thanks,

A word of caution is in order regarding changing from facing to non-facing and back again. If you have overridden master page items, you'll get a second, non-overridden copy on all the even-number pages when that half of the master page is re-applied. This applies to master text frames which override automatically when text flows into them as well as to objects you manually override. I think you'll find this particular technique also only works for master text frames, whereas the Layout Adjustment should work in all situations where frames snap to guides.

How to activate parallel valuation for SAPBanking Loan ?

Hi, I'd like to know how to activate parallel valuation for SAPBanking Loan.
When I deal general loan contract with bank, I have to customize FS-CML,
however any other treasury deals are handled in FSCM (e.g. secrities, money-market, foreign exchange and delivatives).
FS-CML doesn't have parallel valuation functions in its own.
So, I think I must customize both FS-CML and FSCM.
I'll wait for your kind answer. Thank you.
Yugo

Hi
It is not possible to activate in such case, u should not have any stock.
With regards
Pavan

How to increase the time for detect a device down on Prime 2.0

Hi,
I would like to know how to increase the time for detect when a device has lost connection, currently I monitor several stand alone Access Points that are paleced on differents locations connected to prime through 256 Mbps Links, so when the location has very high bandwith utilization, an e-mail notification about the unreachable Access Point is sent, but if we check te reachability, the Access Point is reachable, and we don´t want to receive to many of this notificatios,
thanks for your help

Go to the Console, Select the server --> configuration --> tuning tab,
Stuck Thread Max Time and Stuck Thread Timer Interval (give your required time)
This will definitely increase the Stuck Thread time interval.
or
by using work manager also you can define Stuck Thread Max Time interval by editing deployment descriptor file
<work-manager>
<name>wm_name</name>
<max-stuck-thread-time>30</max-stuck-thread-time>
<stuck-thread-count>5</stuck-thread-count>
</work-manager>

How to schedule a job for transaction CG36, incl. variant?

Hi all,
When you enter transaction CG36, you need to select a User Exist (EHS_DXSDB). After that you need to define a file path.
I would like to schedule a job for transaction: CG36 > Define User Exit: EHS_DXSDB (Import Dok-X material Safety Data Sheets) > and define a path. With transaction SE93, I found program name: RC1RIMPS (program is allowed to be job scheduled), only I can't create a Variant (to define the user exit and file path, no selectionscreen), how to create a variant?
The following programs can't be scheduled either (as they are not of type 1 or J):
SAPLC131
SAPLC1EO
SAPLC3G
Thank you in advance!
Kind regards,
Roy Derks

Hello Roy
I am sorry. To my knowledge up to ECC 6.0 Enhancement Pack 4 there is no SAP EH&S process available there you can do what you are requesting. The "problem" is that you need to "answer" the user dialog. Therefore you can not generate/prepare a variant which could be processed as a job according to my knowledge.
Therefore in my opinion you have this option only: prepare a copy of the transaction (or only the report) using either "Z" or "Y (customer reports). Then you need to exclude some line in the code (which gives rise to the user dialog) and prepare some customer specific coding so that the resulting report can be used in such a way that a variant is possible, but you must make sure that the process later (the real upload process) is processed too in this "job" queue. IN any case: you need to check the log of the report and this must be done by an user. Therefore an automatic process does have some "risks"
The topic of import of reports is used in most cases during a set up of EH&S, because of mergers/acustions but not in the daily work with EH&S and there I believe that SAP does not support this demand.
With best regards
C.B.

How to increase the memory for my weblogic server in Jdeveloper 12.1.2.0.0 ?

Hey everyone,
So as my title says, i'm trying to increase the memory for my weblogic server in my windows 7 64 bit machine, with 8GB ram.
The values appear to be: JAVA Memory arguments: -Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=512m
I've done some search from this forum and i've added this to my jdev.conf:
AddVMOption -XX:MaxPermSize=1536M (in this one i've only changed the value)
AddVMOption -Xmx1536M
AddVMOption -Xms1536M
And i've changed this: MEM_ARGS="-Xms1024m -Xmx1024m" in my startNodeManager.sh file
I'm still getting the same line in my server but i need to change the values since i'm not getting the server to run my application very well (it gets stucked in loading my databases and graphs) and i think it will continue untill i get a heap exception error.
Any ideas of how to change this?
Regards,
Frederico.

Thanks Alejandro .
I'm going to ask you another question and this one is quite important.
Whenever i run my project a couple of times, i'm not able to retrieve the page, it just gets stuck on loading.
It just stops the loading, like its a really really slow page. I'm not using a lot of rows in my database so i don't take to much memory but it doesn't load and i know everything is fine but i just added some graphs after testing it.
Do you know why?
In the console it says that everything is fine and shows the link for the page but it never loads completely until it gives a error because it does not respond in 600 seconds.
Strange right?

How to increase memory allowed for an application

Before in OS 9 and below we can expand the quantity of memory for an application, we can't do same in OS X.
OS X is able to set himself the amount of memory for an application. This seems to work but I think there is a limit sets by OS X.
My question is how to increase this amount of memory ?
I tried to increase it in terminal using "ulimit -d unlimited" but this is not working enough.
I use to do calculation with matrix systems and iterations in Mapple software but on my iMac with 4 GB of RAM memory, when application reaches 450 MB, I get a memory error message. Activity monitor at same time says there is more than 2 GB free !
Has somebody a solution to free this limit, even for a small time or for only an application ?
Thanks for your help.

The full message is :
"Kernel connection has been lost. The kernel returned the following message :
Execution stopped : Memory allocation failed.
Please sea ?alloc for more detail.
You should save this worksheet and restart Maple
Executing commands in Mapple requires a connection to the Maple kernel.
Firewalls have been known to cause problems with kernel connections in Maple. Please ensure that any firewall software is configured to allow Maple to create connections to the kernel. Consul the FAQ for more information."
I checked the firewalls of OS X, they are shutdown and no restrictions seems to be set for processes.
We are expecting for a new version of Maple with some modifications due to Snow.

How to increase max thread for SOAP adapter ?

Hi PI Expert,
I have problem with Synchronous SOAP transaction in PI 7.0 EHP1 SPS2. The interface actually using ccBPM.
IDOC ---> ccBPM -
> synchronous call to SOAP adapter.
The problem is there are always timeout call from Integration server to SOAP adapter after several transaction success.
it seems like the soap adapter is doesn't has enough thread to receive call from IS.
the pattern is like success, success, failed, success, success, failed. it always 1 errror within 1 minutes for 4-5 transaction in the same minutes.
is that any log in adapter that i can check or how to increase soap adapter thread ?
Please advise ?
Best Regards
Fernand

Hi Fernand,
please check this blog:
Adapter Specific Queues in PI
/people/sunil.singh13/blog/2009/03/30/adapter-specific-queues-in-pi
Regards,
Gábor

How to create Background job for Dialog program

Hi Experts,
I have copied Standard tcode to Z-tcode (CS12 tcode).
Now my requirement is to create background job for this program (but program is not a 'E' type its 'I').
How we can schedule Dialog program to Background.
Pls suggest me.
Regards
SK

Hi do as below :
Reefer below :
Bakcground Job Creation
You will have to submit your report using Submit statement ,
then inside the submitted report write open_job.
Regards,
Uma

How to Increase Instance size for ALBPM-Err:'Max instance size exceeded.

HI,
Can anybody in How to increase maximum instance size for
1. ALBPM Studio
2. runtime i.e. process administrator?
Look forward for help.
Cheers
The exception in detail is:
Error while persisting the transaction data: 'Max instance size exceeded.
Current size is 33262, whereas the maximum size is 16384. This occurs with instance 'Process1' at activity 'StartExecution[Process1DownloadMessage]' of process '/Process1Download#Default-1.0''
Details:
Max instance size exceeded.
Current size is 33262, whereas the maximum size is 16384. This occurs with instance 'Process1' at activity 'StartExecution[Process1DownloadMessage]' of process '/Process1Download#Default-1.0'
fuego.server.exception.MaxInstanceSizeRuntimeException: Max instance size exceeded.
Current size is 33262, whereas the maximum size is 16384. This occurs with instance 'Process1' at activity 'StartExecution[Process1DownloadMessage]' of process '/Process1Download#Default-1.0' at fuego.server.ProcInst.getComponentData(ProcInst.java:792) at fuego.server.ProcInst.mustStoreComponent(ProcInst.java:2777) at fuego.server.persistence.jdbc.JdbcProcessInstancePersMgr.executeUpdateInstance(JdbcProcessInstancePersMgr.java:2870) at fuego.server.persistence.jdbc.JdbcProcessInstancePersMgr.updateInstance(JdbcProcessInstancePersMgr.java:2272) at fuego.server.persistence.Persistence.updateProcessInstance(Persistence.java:1008) at fuego.server.execution.EngineExecutionContext.persistInstances(EngineExecutionContext.java:1819) at fuego.server.execution.EngineExecutionContext.persist(EngineExecutionContext.java:1109) at fuego.transaction.TransactionAction.beforeCompletion(TransactionAction.java:132) at fuego.connector.ConnectorTransaction.beforeCompletion(ConnectorTransaction.java:685) at fuego.connector.ConnectorTransaction.commit(ConnectorTransaction.java:368) at fuego.transaction.TransactionAction.commit(TransactionAction.java:302) at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:481) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551) at fuego.transaction.TransactionAction.start(TransactionAction.java:212) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123) at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:63) at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42) at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:264) at fuego.server.execution.ToDoItem.run(ToDoItem.java:559) at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:773) at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:753) at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142) at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134) at fuego.fengine.ToDoQueueThread$PrincipalWrapper.processBatch(ToDoQueueThread.java:446) at fuego.component.ExecutionThread.work(ExecutionThread.java:837) at fuego.component.ExecutionThread.run(ExecutionThread.java:408)

First take a look at your instance variables in your processes. Determine if some could be changed to be Separated instance variables. Once an instance variable's category changes from "Normal" to "Separated", it is not included in the instance size calculation.
If you cannot mark variables as Separated, then in Studio's "Project Navigator" tab, right mouse click the name of your project -> click "Engine Preferences" -> with the "Engine" selected as the Category, click the "Advanced" tab on the upper right change the "Maximum Instance Size" to 64KB (4x the original 15kb value) and change the "Instances Cache" to 1250 (1/4th the original value).
What version of Enterprise are you on (Standalone or WLS)? There is a similar setting on Enterprise, but it is slightly different between the two types of Enterprise Engines.
Dan

How to terminate background job for MRP

Hi dudes,
how to terminate background job set earlier and i want start again with fresh scheduling. as user discontinued using the MRP process.
thanks inadvance for quick response.
Robert.

Robert,
Just though of sharing the alternate way to do this work, instead of DELETE use CHANGE option.
1. Execute transaction SM37 for the program "RMMRP000" and Job name what you have specified with job status "Scheduled" check box activated. Job Overivew screen appears
2. Now select the job in the Job Overivew screen and use Menu bar: Job--->Change or Ctrl+F11. Change Job Screen appears
3. In the change Job screen Hit the function button Start Condition (Green Flag). Start time screen appears.
4. In the Start time screen define your Job schedule and save the time parameters and save change job screen. Now your job is scheduled with new parameters what you have entered.
Regards,
Prasobh

How to manage parallel processing for queue JMS/MDB?

Hello, we are developing a system in WebLogic Server 10g (10.3.0) that contains multiple JMS queues associated with each in an MDB. We need know how manage the parallelism of the message for each queue? for example:
Queue 1: up to 4 messages in parallel
Queue 2: up to 2 messages in parallel
Queue 3: up to 5 messages in parallel
Can also perform this configuration from the WebLogic Server Admin Console?
Thank you very much,
Lucas.

Thanks a lot Tom for the reply, I have read about the descriptor setting 'max-beans-in-free-pool' and I searched this concept at the Administration Console without success.
I suppose other way is create a “Session Pools” under the JMSServer, and then create a “Consumer” and define the setting “Messages Maximum”. One of the disadvantages is that “Session Pools” don’t support JTA, from the documentation:
+Session pools enable an application to process messages concurrently. Session pools are now used rarely, as they are not a required part of the J2EE specification, do not support JTA user transactions, and are largely superseded by message-driven beans (MDBs), which are a required part of the J2EE specification.+
I continue reading the MDB chapter of the performance and tuning guide in the documentation, thanks for any contribution to the topic.
Lucas.

How to increase the time for threadstuck jdeveloper weblogic server

Hi,
This is a requirement for increasing the time for threastuck detection in jdeveloper weblogic server.
Few of my threads take a longer time than the default value for threastuck detection.
Could you please share the suggestions on how to do it?
i have tried by creating workmanager from the administration console but not aware of how to apply it to application(in web.xml).
Share inputs on this.
Thanks,
Devender

You are posting this on the wrong forum. All this in one of the server forums.
Timo

How to increase log level for SUNW.oracle_listener resource type

I understand that i can increase logging level for a resource with "clrs set -p "Debug_level=$LEVEL", but the SUNW.oracle_listener resource type doesn't seem to have this property. Is there some other way of increasing log data to debug an issue with a listener resource? I ask because we have a strange situation where our database listener is being restarted every once in a while. With the log data I have, it appears that the listener is being stopped or dies, and then the monitor restarts it when it detects the fault, however our DBA's believe that it is the cluster that is actually the one cycling it because the monitor fails or is unable to connect because it is too busy to respond in time or something along those lines.
Maybe I am incorrect and it is the cluster, but I'd expect to see something before a "Attempting to restart listener" log entry, something along the lines of the monitor failing or a "no response in given time" before the resource says it is restarting.
Here are the logs from when this first happens, if anyone can advise, I would really appreciate it.
Sep 28 14:17:48 SC[SUNWscor.oracle_listener.monitor]:oracle:oraclels: Attempting to restart listener oracle.
Sep 28 14:17:50 SC[SUNWscor.oracle_listener.monitor_stop]:oracle:oraclels: Stopping fault monitor using pmfadm tag ORALSNR_MON_oraclels
Sep 28 14:17:52 SC[SUNWscor.oracle_listener.stop]:oracle:oraclels: Stopping listener oracle.
Sep 28 14:17:52 SC[SUNWscor.oracle_listener.stop]:oracle:oraclels: Using method 'run_setuid_prog' to execute shutdown commands
Sep 28 14:18:00 SC[SUNWscor.oracle_listener.stop]:oracle:oraclels: Listener oracle stopped successfully
Sep 28 14:18:02 SC[SUNWscor.oracle_listener.start]:oracle:oraclels: Starting listener oracle.
Sep 28 14:18:02 SC[SUNWscor.oracle_listener.start]:oracle:oraclels: Using method 'run_setuid_prog' to execute start commands
Sep 28 14:18:06 SC[SUNWscor.oracle_listener.start]:oracle:oraclels: Listener oracle started.
Sep 28 14:18:08 SC[SUNWscor.oracle_listener.monitor_start]:oracle:oraclels: Starting monitor

Thanks for the reply Thorsten. The logs I included in the original post are actually from /var/opt/SUNWscor/oracle_listener/messages_log.$RESOURCE. I'd like to bump up the verbosity on the oracle_listener logs like I can with the oracle_server logs, but for whatever reason there is no debug_level parameter for the oracle_listener resource type. Sounds like I may be SOL, but thought I'd check with the forum and verify.

How to create a job for proces chain

Hi All,
I have a process chain that gets a trigger (.txt Trigger file) in AL11 inbound foulder.....
we will check for the same trigger in AL11...if it is available..we will trigger the chain using sm64 ...
now, i want to create a job for the same and schedule it automatically everyday.....
Any help will be appreciated....

Dear Sam2027,
you can set a "recurrence" within the schedule options where you can decide not only the day but also the time.
The recurrence can also be use in conjunction with your trigger .txt (which I believe it's a file event): in this case both of them need to be satisfied in order for your schedule to run.
I hope this will help.
Regards,
Samanta

How to increase parallel jobs for TA SGEN

Similar Messages

Maybe you are looking for