How to Report a Peripheral Skill Group in half hour intervals

I have a requirement to report on our service desk's incoming calls during half hour intervals between the hours of 8am - 6pm Monday - Friday between the dates of 22/5/13 - 22/10/13.
Unfortunately when I run this report at the moment, it includes half hour intervals after 6pm, all the way through to before 8am the following morning. (The report also includes weekends)
This causes an issue in terms of the maximum number of rows the report can generate and I think it may essentially mean that I need to manually run this report daily and collate all the figures together.
Is there anyone that can provide any advice on how I can get the data I require?
Further Information:
Using:
Cisco Unified Communications
Sb2-wmal-hdsa
Skill Group
Peripheral

Are you using WebView or CUIC? CUIC will let you limit the results to data within a specific time period and on certain days of the week.
If you're doing this in WebView, I would run a few separate reports (whatever date range is small enough to not cut off data), export them to Excel, combine the data in there, and filter based on the time and day of week. The excel formulas are fairly easy to build with a little practice.
-Jameson

Similar Messages

CUIC-Total Answered Call in Peripheral Skill Group are different with Skill Group Abandon-Answer

Hi UCCE/CUIC Expert,
I have CUIC 9.1(1). Now I am trying to access Cisco Historical Report (Stock).
When I accessed Peripheral Skill Group Historical All Fields, I found total "Answered" are different when I produced using Skill Group Abandon-Answer Distribution Historical.
My question is:
- What kind of call will produce symptom above?
- Is there any miss step in ICM Script so that CUIC will produce this report?
Thanks in advance,
Heribertus

Hi
Some, but not all, Half_Hour tables now have an equivalent Interval table. The Half_Hour tables still appear in the database, but are no longer populated. For CUIC only (and not for WebView) the equivalent Interval tables are populated by either half-hour or fifteen-minute data, based on configuration. WebView uses “half-hour views” to pull 30-minute data from the Interval tables.
While configuring the PG, you will give whether the Reporting interval should for 15 minutes or 30 Minutes, If you have 15 minutes selected then will see 15 minutes Interval in the Agent_Skill_Group_Interval Table.
Regards,
Senthil

I have tried to download the update 3 times and it always takes so long I have to quit. How long is it supposed to take? Half hour, hour, etc?

I keep getting the pop-up telling me there is a n update to install, but when I try to install, it takes over 20 minutes. I can't stop all work for that length of time, and keep canceling the update. How much time is needed to install this update?

Go to http://www.mozilla.org/en-US/firefox/new/ and download the full installer. Run the installer and you will be up-to-date. Sometimes the updater just gets in a weird state...

Query Skill Group - Translation Route mapping from Routing Script

Hi,
Is there a way we can query against the individual routing scripts and extract the PSG-TR mapping?
In ICM we can map any particular Peripheral Skill Group (PSG) to a specific Translation Route (TR) defined on the same Peripheral Gateway through ICM routing scripts.
The PSG and TR are both configured through ICM configuration manager and the details are stored in the ICM DB which can be queried against.
However the mapping between the PSG and TR is done through a routing script using Script Editor.
We would like to make an SQL query where we can see PSGs associated to a Translation route on Routing Scripts.
Product: Unified Contact Center Enterprise (UCCE)
Version: 8.5(4)

Hi Gergely - how would you then query this data if you required it? Is there a way to map the PSGs to the Translation routes they are associated to?
Thanks!

How to find the maximum of group sums within a specific column using report builder 3.0

Hi
For each part number I am trying to find out in which week of a month did the largest daily shipment occur... so using report builder 3.0
in SSRS 2012 I can find daily, weekly and monthly totals for the units shipped but I am having a hard time thinking through the logic to find the daily max for each week.
in my data I can have multiple orders/shipments for the same product on the same day.
The ultimate goal is to set inventory levels
So..
In my matrix report I have
Row groups:
Classid => Product class
InvtID => Item Part Number
Column Groups:
FiscYr=> Fiscal Year
PerPost => Month or period the transaction occurred
Week_period => the week the transaction occurred
Day_period => The day that the transaction occurred
The aggregations are
Sum(case_shipped)
Max(case_shipped)
The Sum(case_shipped) is working as desired but the Max(case_shipped) is picking out the max amount shipped on any one order when looking
at the week, month or fiscal period and that is not what I need.
I have attached a screenshot since a picture is worth more than my words. I have also included some sample data
I would very much appreciate any thoughts on this. I am guessing that the solution has something to do with using the inscope function but
I can't wrap my head around how to use it
Thank you
Tom D
Here is some sample data for Product A
Invtid Case_ship Trandate FiscYr PerPost week_period day_period
A 10 1/1/2104 2014 1
1 1
A 3 1/1/2014 2014 1
1 1
A 50 1/2/2104 2014 1
1 2
A 30 1/3/2014 2014 1
1 3
A 20 1/9/2104 2014 1
2 2
A 5 1/9/2104 2014 1
2 2
A 20 1/10/2014 2014 1
2 3
A 60 1/10/2104 2014 1
2 3
On 1/1/2104 I shipped a total of 13 cases
On 1/2/2104 I shipped a total of 50 cases
On 1/3/2104 I shipped a total of 30 cases
On 1/9/2014 I shipped a total of 30 cases
On 1/10/2014 I shipped a total of 80 cases
On 1/9 I shipped a total of 25 cases
I would like to show that in week 1 the maximum number of cases shipped on any day is 50 (1/2/2014)
I would like to show that in week 2 the maximum number of cases shipped on any day is 80 (1/10/2104)
I would also like to show that in perpost (month) 1 the maximum
number of cases shipped on any day is 80 (1/10/2104)

Hi
I was able to find a solution
I built a new dataset in report builder using the same table as before but tried out the "Group and Aggregate" function and for the case_ship
field I chose "Sum" as my aggregate.... In essence this gave me a very cool and easy daliy sum of the shipped cases.
When I used this new dataset and built my matrix report I was able to easily get the max daily shipment for each product by week, month and
year.
Tom

How to set different default interactive reports for different user groups?

I'm probably overlooking an obvious solution, but how do I set different default interactive report for different user groups?
For the same interactive report, I want one set of users to see a default where the default filter is based on column X. However, another group of users doesn't have authorization to see that column so I need to set the default filter to something else for them.
Thanks

You can set a filter on a report in a URL - would that help? I think with apex 4.x you can also link to a saved default report or alternative report...

How can I get the second group and report totals in Matrix report?

Hi,
I have created a matrix report with 2 break Groups.
Iam getting columns totals for the first group, but not for the second group and the report totals.
How can I get the second group and report totals for each month?
Thanks.
Ram.

Hi Ram,
If you want a total at any group-level, go to the particular group in the data model, insert a summary column in the group, and select
Reset At > appropriate Group Name
For report level summaries, you must create the summary column outside of all groups.
Navneet.

How do I print a contact report for a select group?

How do I print a contact report for a select group?

You should be able to select the group instead of all contacts. Older article.
Contacts – Print Contact Information

How to add the Profit center Group in the PA report KE33.

Hi Frnds,
How to add the Profit center Group in the PA report KE33.Iam not able to find PC group in the list to add to the Charateristics already added.

Hi
PC group is not available as a Char in COPA..
if you want to do that, either create a Char Hierarchy in KES3 for the Char Profit Center
OR
Create a WW char in KEa5 and write a derivation rule using the method "Enhancement" .. Write ABAP Code in COPA0001 exit
bt, Ajay M

Hold Tim calculation in Agent & Agent Skill Group Reports

Please can someone confirm if I have this correct AHT is = to HandledCallsTime/CallsHandled HandledCallsTime = HandledCallTalkTime + HoldTime + Wrap.
If this is correct can someone confirm what constitues HoldTime - is InCallsOnHoldTime part of the overall hold time?
I have created and AVG Hold time HoldTime/CallsHandled, AVG Talk Time HandledCallsTalkTime/CallsHandled & AVG Wrap WrapTime/CallsHandled and all of those added together = AHT
If I run the report and look at AHoldT that is showing a calculation of InCallsOnHoldTime/InCallsOnHold
My query is this, I take a call, I speak to the customer for 60 secs, put them on hold whilst I make an outgoing call 30 secs, then come back to them and speak to them for a further 30secs and do 10 secs of Wrap...
Where does my Hold time with regards to me making a call sit..
As when I run this report I get the following output attached.
Arcadia wants to ensure that the Hold time that is happening whilst I am making another call is counted within the AHT... AS far as I can see it isn't!

Hi,
no, you did not. Just 'reporting' and 'cuic'.
Er... it's not really the SQL query, but anyway, I if I substitute AgentSkillGroup for Agent_Skill_Group_Interval, then the explanation for the HoldTime is this - kind of fuzzy, though:
>>
>> Number of seconds where all calls to the agent are on hold during the
>> reporting interval. HoldTime is counted only while the agent is doing no
>> other call-related activity. HoldTime is included in the calculation of
>> LoggedOnTime.
>>
I am not absolutely sure about this, but logically, the IncomingCallsOnHoldTime is a subset of HoldTime. I mean, HoldTime being the global HoldTime (including all types of calls), and IncomingCallsOnHoldTime is related only to inbound ACD calls. This is actually in the schema doc, but again, it's kind of fuzzy:
>>
>> IncomingCallsOnHoldTime
>> Total number of seconds that inbound ACD calls calls that an agent
>> associated with this skill group placed on hold that ended during the
>> reporting interval. The value is counted when the after-call work time
>> associated with the call (if any) is completed, and the database is updated
>> every reporting.
>>
Well, this does not explain that, does it.
This way: do you have access to the HDS database? Would be interesting to take a look at the Agent_State_Trace table for a particular agent and then do the calculations. I know, it's kind of complicated, but let's just wait and see if someone else comes up with a better explanation.
G.

How to build a Matrix with Group Left Report

I want to build a Matrix with Group Left Report,not Matrix with Group Above Report,i am still finding the solution, any help is useful.
thanks
<[email protected]>

Hi,
The problem in your output is not clear. The report output should appear like:
Order Mode.....Sales_Rep_ID > 10..11..12..
Online.........Order Status
...............A..............x....x...x
...............B..............x....x...x
...............C..............x....x...x
Order Mode.....Sales_Rep_ID > 10..11..12..
Retail.........Order Status
...............A..............x....x...x
...............B..............x....x...x
...............C..............x....x...x
Here "Order Mode" is the group field (it repeats for every group). Could you pl specify what output you are getting?
If the problem is that you don't want the Title (like "Order Mode" in the above example) to print in every group, just place it outside the group repeating frame. It will print only once.
Navneet.

How to see the consolidate report of Gl banlance (Group chart of account)

Dear All ,
We have 10 company code ,Each company code we assigned same chart of account.But Consolidate and reporting purpose we created Group chart of account.
Because when i saw the gl account balance ,it showing 10 company code line item for this reason we created Group chart of account created and assigned all gl account in operating chart of account.and group chart of account assigned in operating chart of account.
But now i am not able to see the consolidate report of all company code totals.
Can you guide me where i can see the consolidate report.of all company code trail balance and balance sheet.
Thanks in advance
thanks and Regards
Girish.

Hi Javeed,
Thanks for immediate respose.
But when i run f.08 it will show company code wise.But i want to see total balance of all company code so that i created group chart of account.
Is there any method to see the total balance of all company code
OR
Any other method to see all company code total balance.
thanks and regards
Girish

Skill Group Name is not coming on Cisco CTI Tool Kit real time status

Hi,
I have UCCE 9.0.3 in my environment but when supervisor is monitoring agent state on CTI Toolkit Team Real Time Status we are not able to see Skill Group name.
For your reference I have enclosed screen shot of that.

Hi,
first, read this document: Recommended Tracing Levels for Troubleshooting IPCC Issues. Apply the recommended trace levels to the following services:
CTI OS Server
CTI Server
But first take note of the original values (so you can switch back to normal tracing).
Dump the logs for both the above services: How to Use the Dumplog Utility.
For instance: dumplog ctisvr /hr 1 /of c:\temp\ctisvr.log
Post the logs to here.
G.

Reporting on Strategic Skills Priority from table T5W8P (SAP-HR)

Hi all,
I have a requirement to report on Strategic Skills Priority which is held in table T5W8P in ECC6.
So I need to load this through to BW somehow, and I guess create it as an attribute of the Qualification.
However I cannot see this field in any of the standard extractors and don't seem to be able to create this table as a datasource using RSO2.
Can anyone tell me how I can bring this field through to BW?
Many thanks
Mischa

Hi,
I tried that and get an error message "Entry T5W8P does not exist in DD02L (check entry)"
I am not sure if this is something that has to be done on the SAP side, or if this is something specific to our system. Has anyone seen this error before?
Thanks again
Mischa

Consumption report Date to date ,Group & itemwise

Dear Sap Expets,
Can you please advise me that i want to make consumption report Date to date ,Group & itemwise ,in summary report (Total Qty and Value consumed).How is the possible it?
Thanks
mohit

Hi,
Use MB5B report for the same, it will give you qty & values for overall receipts and issues for certain period or else refer report MC.2
Hope this will resolve your issue.
Thanks & Regards,
Sandesh Sawant

How to Report a Peripheral Skill Group in half hour intervals

Similar Messages

Maybe you are looking for