How to sent notification to a user depending on some condition?

Hi All,
I am working in iRecruitment Recruiter responsibility->iRecruitment Recruiter->Candidate
I have an requirement that for a particular applicant if HR is taking Interview and he forgot to add feedback.Then a notification has been sent to him after a day.
How to do it by workflow and Alert?
Please Help.
Thanks In Advance.
Edited by: SHD on Jan 20, 2011 10:48 PM

Perhaps you'll find this link useful. It gives a general idea of how you can create and adjust your custom renderer:
http://www.senun.com/Left/Programming/Java_old/Examples_swing/JTableExamples4.html
Hope it helps.
Eugene

Similar Messages

How disable subscription notifications to locked users?

Hi All,
We have some potal users locked (dont want to delete them at the moment).
Subscriptions notifications are sent to those users as well (at least admin notifications).
Is there a way not to sent subscription notification to locked users?
We have NW 7.01 SP3 Ep1.
Thanks.

HI Dimitri,
You can do but the process can be possible through manually so go to
Detail section -> Setting->Subscription-->Here you can cancel the subscription part
so that you cannot send any mail to that particular user or if the person already in a group so exclude them from the group so they should no longer to get the subscription as the same thing my friend said on previous forum messgae.
This will helpful to you.
Regards
RS

How to send notifications to different user groups based on payload value

Hi Gurus,
I have a scenario in BPM where i have to send notifications to different user groups based on the payload value.
ex:
Payload sample:
<employees>
<emp1>
<state>TX</state>
</emp1>
<emp2>
<state>AZ</state>
</emp2>
</employees>
Requirement: I have to send notification through Humantask to users of TX and AZ as mentioned in payload.
Can you please help me out in achieving this in BPM?
Thanks,
Raju
Edited by: user0808 on Mar 1, 2013 12:58 PM
Edited by: user080811 on Mar 4, 2013 11:06 AM
Edited by: user080811 on Mar 4, 2013 11:07 AM

Hi Daniel,
thanks a lot for your quick response.
I went through your blog and tried implementing the same.
But in my case i have to send parallel notifications to both the states.
Please correct me if i am wrong, using if conditions in rules is allowing me to send to only one state.
I also tried the following approach
1) setting the organization units in bpm workspace
2) passing values using human task parametric roles
3) and looping the subprocess that has the humantask for the count of states.
I am able to loop the subprocess but i am not able to change the parametric role value for the next iteration of the subprocess.
Can you please help me in resolving this?
thanks,
Raju

How to do readyonly field depending on some condition.

Dear All,
One seeded page in iProc having Table Region. That Table region having Item, Item Description, Quantity, Price, Amount etc....
I need to do Quantity field as readonly for some Items only..
Is it possible to do, if it is possible pls suggest how to do it..
Thanks in Advance,
Hanimi.

1. Extend the underlying VO
2. Create a transient attribute in the VO and set the value to true/false depending on yoru condition
3. Use spel on the item(using personalization) to enable/disable the item based on the VO Attribute created.
Refer to: http://oracle.anilpassi.com/spel-in-oa-framework-with-audio-visual-demo.html

Plot different data set depending of some conditions using labview and veristand

Hi Community,
i have a couple of points saved as XY data points on my desktop. The files are save as csv. the idea is to read the file utilizing the Read From Spreadsheet File vi when some conditions are met and then plot the XY data wiht XY Graph Addon of the veristand workspace.
for instance:
if case 1 is true read the corresponding file and then plot the first set of data
if case 2 is true read the corresponding file and then plot the second set of data
if case n is true read the corresponding file and then plot the n set of data.
Could you give some advices how to implement it (Labview and Veristand)?
I'm using LV and NIVS 2012
Thx
Mich
Attachments:
vide.vi ‏35 KB

Hi Michel,
I believe the easiest method will be to use the VeriStand .NET API to call into VeriStand and utilize LabVIEW for creating the decision making cases that you have. I have attached some examples of using the VeriStand API in LabVIEW.
Using the NI VeriStand .NET API in LabVIEW to Control a VeriStand System
https://decibel.ni.com/content/docs/DOC-32268
Where Can I Find LabVIEW Examples Using the NI VeriStand API?
http://digital.ni.com/public.nsf/allkb/E1066949FA67B6CE862578A7005988D5?OpenDocument
Please let me know if this helps.
Matt S.
Industrial Communications Product Support Engineer
National Instruments

How to make Page View Mode user dependent?

Greetings!
In our company there are a few developers working with Apex. Now some prefer the new "Tree View"-view on the page layout, I prefer the old "Component View" and often each one has to switch back to his own setting, because someone else changed it and we all log in under the same admin login. So to avoid this I am wondering how to keep the settings, that are set on one workstation. Is this depending on the user, so when our chief-admin creates another user for me, my settings will not affect the others? Or is there a way, that apex can store the settings for an individual id-address?
I hope this made clear what I am thinking about. :)
Thanks für advise,
Tobi

This is a user preference. For this—and a whole load of other excellent reasons—you should have individual user accounts.

How to Get HTML Cell in red depending on a condition while getting a output from Sharepoint powershell

In Below Script I am able to get "disksizerequired" number in red by below script but I want that whole Cell to be red.
Please let me know how to do it
# HTML code to format output
$b = "<style>"
$b = $b + "BODY{background-color:white;}"
$b = $b + "TABLE{border-width: 1px;border-style: solid;border-color: black;border-collapse: collapse;}"
$b = $b + "TH{border-width: 1px;padding: 0px;border-style: solid;border-color: black;background-color:thistle}"
$b = $b + "TD{border-width: 1px;padding: 0px;border-style: solid;border-color: black;}"
$b = $b + "</style>"
# Variable initializing to send mail
$TXTFile = "C:\Abhishek\test\test231.html"
$SMTPServer = "mapintmail.lab.com"
$emailFrom = "[email protected]"
$emailTo = "[email protected]"
$subject = "Sharepoint Farms Content databases Report"
$emailBody = "Dailyreport on Sharepoint Farms Content databases"
$encrypted ="01000000d08c9ddf0115d1118c7a00c04fc297eb0100000097606a1d1a7321488a23f2056c613f690000000002000000000003660000c000000010000000ebf48a9bd08c88a4de367597a1b86b390000000004800000a0000000100000006fa6c5ca0af8ad180e19cc6e5a42765e200000009a2551a74c5da425a1fa63705d1d7469fa0bb94409bf9a43ba951ee5c64d7ff614000000c9c659511fda53078b9f2e00f3b673349962affa"
$usser1 = "lab\abhi"
$usser2 = "labb\abhi"
$password = ConvertTo-SecureString -string $encrypted
$cred1 = new-object -typename System.Management.Automation.PSCredential -argumentlist $usser1,$password
$cred2 = new-object -typename System.Management.Automation.PSCredential -argumentlist $usser2,$password
# Creating PSSession and Loading Snapin
$s1 = New-PSSession -Authentication CredSSP -Credential $cred1 -ComputerName LROSHRPTL01
$s2 = New-PSSession -Authentication CredSSP -Credential $cred2 -ComputerName LROSHRPTL03
Invoke-Command -Session $s1 -ScriptBlock {Add-PSSnapin Microsoft.SharePoint.PowerShell}
$f1 = Invoke-Command -Session $s1 -ScriptBlock {Get-SPWebApplication | Get-SPContentDatabase}
$g1 = $f1 | Select-Object DisplayName,WebApplication,disksizerequired,CurrentSiteCount,WarningSiteCount,MaximumSiteCount | ConvertTo-Html -Fragment DisplayName,WebApplication,CurrentSiteCount,WarningSiteCount,MaximumSiteCount,@{label="disksizerequired";expression={
if($_.disksizerequired -gt 1024*1204*1024)
{"#font"+$_.disksizerequired+"font#"}
else
{$_.disksizerequired}
$g1 = $g1 -replace "#font","<font color='red'>"
$g1 = $g1 -replace "font#","</font>"
Invoke-Command -Session $s2 -ScriptBlock {Add-PSSnapin Microsoft.SharePoint.PowerShell}
$f2 = Invoke-Command -Session $s2 -ScriptBlock {Get-SPWebApplication | Get-SPContentDatabase}
$g2 = $f2 | Select-Object DisplayName,WebApplication,disksizerequired,CurrentSiteCount,WarningSiteCount,MaximumSiteCount | ConvertTo-Html -Fragment DisplayName,WebApplication,CurrentSiteCount,WarningSiteCount,MaximumSiteCount,@{label="disksizerequired";expression={
if($_.disksizerequired -gt 1024*1024*1024)
{"#font"+$_.disksizerequired+"font#"}
else
{$_.disksizerequired}
$g2 = $g2 -replace "#font","<font color='red'>"
$g2 = $g2 -replace "font#","</font>"
ConvertTo-HTML -head $b -Body "<h1>$(Get-Date) Sharepoint Farm Database Content DB Report</h1> <br /> <h2>SharePoint_Config_UAT2010 $g1 SharePoint_Config_Intranet2010 $g2</h2>" | Out-File C:\Abhishek\test\test231.html
Invoke-Expression C:\Abhishek\test\test231.html
# Code to Send Mail
Send-MailMessage -SmtpServer $SMTPServer -From $emailFrom -To $emailTo -Subject $subject -Body $emailBody -Attachment $TXTFile

If I understand the script correctly, what it will be doing at the moment is setting the font colour to red, instead of the background colour. To do this, you'd normally have to sent the attribute on the <td bgcolor='red'>, rather than using <font
color='red'>, but you might try using a span instead.
$g2 = $g2 -replace "#font","<span style='background-color:red;'>"
$g2 = $g2 -replace "font#","</span>"
If this isn't what you're looking for (because there may be an untidy margin around the span, or something), you'll need to give the <td> a classname, and then change the css for that class within $b instead. Let me know if you prefer to try that.
OWA For SmartPhone

How to populate values dynamically & allows user to edit some other columns

Hi..I am new to Apex..please help me to sove it out...
I have a scenario like editing the some of the Customer details where as one field is dynamically populating from a different table.
Columns like Include, Frequency, Communication, Address and Exclude has to be displayed in tabular format and data should be stored in a table called "om_customer_catalog ".
In this "Communication " column value is dynamically populating from a table called "om_customer_settings" and the no. of records in the om_customer_settings table may vary time to time as per the settins in the Admin module.
I want the user to edit all details except Communication column for all the rows which is displayed and the no. of rows should be displayed dynamically as per the settings.
how can i achieve this?...which way i need to proceed like whether report kind of thing..or someother way..
hope some reply....
More Column details:
Include - a Check box with editable(values Y or N)
Communication - text field with display only(values like Promotional Email, All Email etc.)
Frequecny - Drop downbox with editable(values Annually/Monthly/Weekly etc)
Address - Drop down with editable(static values like Me, Father, Mother,Brother etc)
Exclude Reason - text field with editable(any text value)
Apply - a button for saving the changes
thanks in advace...
renjish

Hello Renjish,
Solution is quite tricky, You have to make a procedure which select each row of your tabular form and executes the update statement (customized).
e.g
to select each row of table use
begin
FOR I in 1..APEX_APPLICATION.G_F01.COUNT
LOOP
insert into table_name values(APEX_APPLICATION.G_F01(i),'PENDING',sysdate,'RESOURCE','','','','');
end loop;
end;
here APEX_APPLICATION.G_F01(i) will return the value of the first column of selected row. Pick the values and make a cutomized update command.
Regards,
bhanwar

Processing raw data in different ways depending on some condition

Hi,
I am receiving a raw data stream through a UDP port. The values contained in the raw data are all stored in 32 bits but are of different formats i.e I have 16 bit signed integer, 32 bit signed integer, 8 bit unsigned integer and 32 bit single precision floating point number. I have a spreadsheet which tells me the measured parameter, the data type and the address of the parameter within the stream (ie parameter 1 is address 1 and is the 1st 32 bits, parameter 2 is address 2 and is the following 32 bits, and so on...) I need to use the "data type" column from the spreadhseet as a condition to a case structure which will then display the 32 bits of data in the correct format. Ideally I want my output to be an array of numbers under each Parameter (or address) so I can save to a TDMS file. I have an idea of how to do this part but I am struggling to link the 'data type' condition and case stucture successfuly. Any ideas or pointer would be greatly appreciated. I have attached my VI so far...
Attachments:
UDP_Case_Struct.vi ‏24 KB

TGL wrote:
At the moment the input to the case structure is an array of data types. Is this maybe causing a problem as a single data type is not being fed into the selector terminal?
You are indexing out a 2D array, thus you need to wire both indices to get a scalar element suitable to be wired to the case structure. If you leave one index unwired, you get an entire row or column respectively.
How often does the file change? If it is always the same, it would be sufficient to read it once before the loop.
LabVIEW Champion . Do more with less code and in less time .

Enable/disable zoom depending on some conditions

Hi All,
I am trying to enable zoom functionality by modifying the custom.pll.
Click on zoom will take to a new form which has 2 fields carried over from the calling form.
Now the requirement is "Only if there is a record in the called form the zoom should be enabled."
I have added the following code in the custom.pll
form_name varchar2(30) := name_in('system.current_form');
block_name varchar2(30) := name_in('system.cursor_block');
blk_status varchar2(10) := NULL;
begin
if (form_name = 'FNDPOMPO' and block_name = 'PROFILE_OPTIONS') then
message('Inside If');
blk_status := get_block_property(block_name, STATUS);
message('Block status is ' || blk_status);
if blk_status != 'NEW' then
return TRUE;
else
return FALSE;
end if;
end if;
end zoom_available;
But I see the message "Inside If" and "Block status is NEW"
When the form is opened, but when i query for the records, these are not displayed again.
I tried adding the logic to the Event procedure in custom.pll.
In the event function, if the event is zoom and the parameters to be passed to the new form are NULL...
then a message is displayed on click of the zoom.
But the zoom will still be enabled.
How to disable the zoom itself when the parameters have no values?
Please let me know how to get this done.

First and foremost, the Zoom functionality is a feature of the Oracle Enterprise Business Suite (EBS) not a feature of Oracle Forms. Please post your question in the General EBS Discussion forum. If you have a general Forms question, by all means, ask it here! ;-)
Craig...

How can i end the Process chain based on some condition

HI All,
I have a scenario where i have a main pc chain which call the new chain at the end which in turn again call pc1. So its more like a closed loop .
pc1-->pc2->pc1
What main chain does is it reads some field value from a dso and assign that to some variable and set some flag to identify that value has been used. My second chain just run the report using the same variables assign by first chain. Now i have to design the main chain such that when all the values have been read from the dso, it should exit and should not trigger 2nd chain. How can i achieve this scenario.
Thanks
Prashant

Hi,
For this try using Process Type-"Decision between multiple Alternatives" in your main chain.It helps you the set condieion based on some formulas
Pls refer links
Decision Between Multiple Alternatives
thanks
nilesh
Edited by: npathak on Aug 11, 2010 1:16 PM

How do i export the table data based on some condition for backup

Is is syntax correct
exp scott@orcl92 file=emp_29aug.dmp tables=emp
query=\"where emp_no in (1,2,3,4) \".
How do i take the backup of more than one table?
what is the syntax for that
Thans

Thanks for your response
If i want to add more than one condition in the query, then how do i do that
exp scott/tiger@orcl file=scott.dmp tables=(emp, dept) query=\"where deptno = 30\" and emp_no in (1,2,3,4);
how do i do that

How to disable view buttons on some condition-webdynpro abap

Hi ALL,
i have a two buttons in my view ......initially one button must be enable,depending on some condition i want to disable one button on the same view .........in which i am displaying my alv data ........(in the same view).

check the properties with property name Visible.
Take one attribute with name as visibile and Type ( WDUI_VISIBILITY-Data Type for "visible" Properties)
then bind this attribute with property visible.
then in run time according to the condition pass value '01'-for no visibility and '02' for visible.
Hope this helps you.
Regards,
sarath

How do I do this. Users without FormsCentral accounts or accounts with unverified email addresses cannot receive email notifications. No notifications will be sent until the accounts are created and verified.

How do I do this. Users without FormsCentral accounts or accounts with unverified email addresses cannot receive email notifications. No notifications will be sent until the accounts are created and verified.

Moving this discussion to the FormsCentral forum.

Tracking notifications sent from BPM process - User Messaging Service

Hi,
I have a requirement to track the notifications sent from all the BPM processes in one place.
My Requirement is to (1. Check the status, sender, receiver of the notification, 2. view the actual content of the notification, 3. Resend the notification)
Few options I have explored are below. Need experts advice please
1. Enterprise Manager gives the option to check each notification status and option to resend the message. I have two problems with this option
     a) It does not solve my requirement of 'viewing the content of the message'. It does not show what is the actual message content. though we can see other notification details like sender, receiver etc...
     b) users does not want to go to enterprise manager. They need a separate UI based on ADF.
2. Tried to build a UI based on UMS EJB API and UMS WebService API. Both the APIs provide the operations to check the status of the message. But there is no API that returns the actual content of the message
     a) It does not solve my requirement of 'viewing the content of the message'. Both the APIs does not expose any operation to retrieve the message/message content. I see AccessPoint as one options but, In my      case, Application need to track the messages sent to all the users, not particular address.
     b) There is no operation exposed to resend the message. Not sure how it is being done through enterprise manager.
3. Tried by directly accessing the ORASDPM schema of UMS to fetch the content of the message. found that the content of the message is stored in 'MESSAGE_OBJECT' Blob column of 'MESSAGE' table.
     Built an ADF application based on ORASDPM schema. Following issues:
     a) could not parse the BLOB column data. Tried using a blob converter which converts the stream to text. but the conversion is not happening properly.
     b) Need to figure out how to resend the message.
My environment: Oracle 11g , JDeveloper 11g Release 1 11.1.1.6.0
Thanks in Advance.

Hi,
try this question on a BPM forum please.
Frank

How to sent notification to a user depending on some condition?

Similar Messages

Maybe you are looking for