HP Printer doesn't work after changing computers

After a recent change to a new ASUS computer running Windows 7, I cannot get the Deskjet to print. It was working perfectly before the changeover. I have downloaded HP Print and Scan Doctor. I am told that the driver is already in the Windows 7 software, however the Doctor reports that " the full software solution for your product is not installed on this computer".
I have tried disconnecting and reconnecting the USB link, but with no success. (he USB cable is linked via a cord-mounted
25 pinDIP connector to the Deskjet.
It seems that no communication is happening between computer and printer.
I'd much appreciate some helpful comment!
Thanks
Rodney

Thank you for your question re my DeskJet710C printing problem.
Yes there is a problem listed in my Device Manager Universal Serial Bus Controllers.
It mentions an Unknown Device with Port_#0002.Hub_#0004. It says no driver files are loaded or have been required for this device. I have tried changing this Port to 0001 without success.
There is a similar port called USB Printing Support listed with the Device Manager, giving a Driver File:
C:\Windows\System 32\DRIVERS\usbprint.sys ..... but this doesn't seem to exist on my current system.
I have tried downloading it from the net, but without success - I guess it needs installing on the Registry (?).
Should I use something like RegCure to get this installed?
Many thanks
Rodney

Similar Messages

My Canon printer doesn't work after updating

Hi everybody.
Everytime when I update software, my printer doesn't work. I use Canon i-sense lbp3010b. For example, when I try to print out a document, I press the PRINT button (in any application) and it opens the printer application. It shows the message "Printing…" for some 3 minutes, then shows "Paused". I try to resume the process, but it doesn't help-the same scenario, again. Once, I have another problem on printer, which printed only graphics, not text. I solved this problem downloading the printer driver from canons austrian web-site, but it doesn't help either anymore.

Might be best to delete device driver for printer before updating. Then try setting your printer up afterwards. The update may have some compatibility issues. I'm sure there will be updates and bug fixed in the near future. There have been a lot of issues with the recent lion software updates especially. Best thing I can say is be patient and make sure you submit this issue to apple.

EPSON CX5600 PRINTER DOESN'T WORK AFTER MOUNTAIN UPDATE

Hello Dear,
I've using my Epson Stylus CX5600 for a long time with OSX 10.7 Lion on my Mac.
The printer is connected in another computer (Windows 7) and I can print fine from my macbook air
After my system update for OSX Mountain Lion yesterday, my printer works fine only on Windows computer
on my macbook doesn't works anymore
I've re-installed a lot but when I try to print the sheets appears in blank
The driver-version available in Mountain Lion is 1.5
I guess this is the problem and need a urgent correction driver update
I'm looking forward to the internet and Epsons websites but didn't find nothing,
in Epson website doesn't
Can you help me please?
Thankyou

Hi my friend,
I've tryed Bonjour, but only works Windows to install a print for Mac.
I need the opposite... print from Mac to Windows.
Yes, I've a lot of problems to install a printer on Lion, but after 3 days I got success
I can't remember but I did this:
1. In iMac System Preferences->Print&Fax->"+"
2. In "Add Printer" click and Tool Bar->Customize Toolbar...
3. Add "Advanced" to Tool Bar and click "Done"
4. Click Advanced->Type->LPD/LPR Host or Printer
5. URL: lpd//user:[email protected]/EPSON%20Stylus%20CX5600&20Services
6. Printer Using->Select Printer Software... (EPSON Stylus CX5600 Services)
I did this and on Lion works fine. But now on Mountain Lion I can install, but I've received the error message
Do you have any idea?
Thank's again

Printer doesn't work after Panther to Tiger upgrade

After upgrading from Panther to Tiger my usb connected Canon PIXMA iP5000 printer no longer works. In printer setup utility when I click "add" I see the ip5000 but the "Print Using" dialog box says "please select a driver or printer model". In the drop down list under Canon there is no driver listed that corresponds to my iP5000 (also, only gimp-print drivers are listed for some reason).
I reinstalled the printer software from the disk that came with the printer but still nothing relevant appears in the list under Canon. I installed a newer OSX driver from the Canon website but still nothing relevant (and still only the gimp-print drivers in the list under Canon).
Using the finder search function I located a file called ip5000.ppd on the hard drive. I selected this file in the "Print Using" dialog box and was then able to add the printer. When I try to print though nothing comes out of the printer.
I installed a driver from www.printfab.com for the iP5000. This works fine but apparently I have to buy a license for $61 to use the software?
Can anyone out there tell me what's going on? Why is the driver from the Canon web site not showing up under the Canon tab in the printer setup utility? Any idea where it is or what file extension it should have so I can search for it?
Thanks,
Stickman007
imac G5 PowerPC Mac OS X (10.4.8)

In step 3, I moved the contents of the BJPrinters
folder to the desktop instead of deleting them
(deleting is so final).
We need to delete and empty the trash. It seems that for some setups, leaving the files on the system (including the trash) interferes with the new driver installation/operation.
In step 4, the only file that seemed close to what
you mentioned was CanonPrinterDrivers.pkg. I moved
it to the desktop also.
This is the original package included with the OS for the Canon BJ drivers we are deleting. In case you ever need to add an old Canon driver then it would be best to put this file back. But it is odd that there is no other Canon package. I expected there to be one for the iP5000 that you installed.
The result was the same as before - when I try to add
the printer the "Print Using" menu still shows a
greyed out "please select a driver of printer model".
The Canon folder still shows the same gimp-print
options, none of which are related to the iP5000.
Yes. The iP5000 won't appear in the list as it hasn't been written to do so. As I said before, the driver, upon detection of the printer, adds the printer to the list. You cannot browse to it.
Let me know if you have any other ideas (or if I need
to delete the files rather than just move them to the
desktop).
So, I think you need to do the steps again, this time delete the contents of the CanonBJ folder and empty it from the trash. The thing I would add this time is turn off the iP5000 (unplug the power cord but leave the USB connected) at Step 6 (you may need to shutdown rather than restart the Mac). Then start the Mac, install the latest driver (which is v4.1.9) do the disk permissions and then, before you open the Printer Setup Utility, reconnect the power cord to the printer. Hopefully now the driver will detect the printer and add it to the list.
Paul

Wrt300n- wireless doesn't work after changing default IP scheme

When I change the 192.168.1.0 default network scheme my wireless connection doesn't work to the internet I can get to the router's configuration ( I need to change for VPN reasons) The LAN connections work fine. Any ideas or settings that I can look at.

Reset your router by holding down the reset button on the back for 30 sec. This should get you on the net but you will need to configure your router wireless settings to secure it. Good Luck!

IMessage doesn't work after changing the sim. New number isn't even recognised.

I changed my sim from a German to a French one and the card is already active and calls are possible, but iMessage doesn't work. The new number is not recognised and iMessage cannot be activated.
I tried to switch it off and and and I reset the network, but nothing. I even removed the card a few times, but no change.
How can I make it work?

Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
On my SD TV... Notice the black bars on the top and bottom. Once I go in and out of the guide the black bars are gone. I have reported this but if you are confirming the issue I will report it again.
jaytee1019 wrote:
I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

Printing doesn't work after 10.1.3 update...

We did a deployment with System Center 2010 and the majority of our workers cannot print from the reader.
The solution for now is deleting their profile. As you might imagine it's not a great solution.
We didn't had any issues with the 10.1.2 but now we do... you say the printing issue is fixed but for us the printing issue just started after 10.1.3.
Anyone found out which file \ configuration \ registry key is making this happen? We tried deleting the adobe reader folders inside the user profile but didn't solve the issue.
Thanks.

Any update to this? I have the same issue with 10.1.4. If I disable protected mode it works.
Also other users on the same machine can print the same PDF with protected mode on.

Incoming email doesn't work after changing to iCloud

After changing to iCloud, my email cannot receive mail any more, but I can still send.

Hello,
I understand, we need to know what version of Mac OS X your PowerBook is running in order to assist you.
If you don't know you can go to the Apple logo on the top left and click 'About This Mac'
It will tell you what Mac version your PowerBook is running, for example Mac OS X 10.4
When you say emails icon, do you also mean the 'Mail' that has the icon as a stamp?

Firefox doesn't work after changing networks.

I take my laptop to work and use it at home, with different networks (VPN at home) and I always put my laptop to sleep. The firefox window doesn't update when I switch networks and if I refresh, it keeps uploading and eventually says "timed out". I have to restart firefox to make it work.

See --> [https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading to Firefox]
Links to instructions for settings for '''''McAfee Internet Security 2009 or 2010''''' and '''''McAfee Security Center (McAfee Total Protection, McAfee AntiVirus, or McAfee Internet Security 2011)''''' can be found on this page (scroll down to list of firewall applications) --> [[Firewalls]]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

3D Doesn't work after changing the LCD Screen

Hi, I had a problem with my Toshiba Qosmio F755-3D350 the LCD screen broke and I have to replace it with a new screen.
The new screen is the same model : B156HB01 V.0 from Au electronics, that the original screen on my laptop had.
everything works fine the resolution, the camera but when it comes the 3D it doesnt work the Leds on the web camera doesn't turn on and activate the wiggle stereoscopy.
How can i activate again the 3D or Where is the problem?
Thanks.

Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
On my SD TV... Notice the black bars on the top and bottom. Once I go in and out of the guide the black bars are gone. I have reported this but if you are confirming the issue I will report it again.
jaytee1019 wrote:
I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

Filter button doesn't work after changing worksheet name

I am using Bex 7.10. I have a workbook with 2 queries. I want to change the name on the Tab for each sheet but when I do that the Filter and Information buttons no longer work. Is there a way to do this?

Check in the Design mode and right click on the Filter tab and check do you see all the filters listed?
If not you can reinsert the query to a new workbook and try.
@AK

SD Override doesn't work after changing the channel

I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
On my SD TV... Notice the black bars on the top and bottom. Once I go in and out of the guide the black bars are gone. I have reported this but if you are confirming the issue I will report it again.
jaytee1019 wrote:
I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

Touchpad doesn't work after changing from Vista to XP Satellite A210

Hi everybody!
I have changed Windows and now something is wrong with Touchpad. It works only as a mouse (cursor moves, right and left buttons are also ok).
Before with Vista I had email button, wireless connection, something else and sound changing, and plus it had extra blue light. Now these buttons are not active and no etrxa light.
Laptop Satellite A210.
I've tried all possible drivers already but maybe you could advice me something else.
thanks in advance!

please try this one
http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-20070809133247.zip
and give us feedback if this driver helps or not
thx

My iphone doesn't work after changing cards from us to polish ones

Hi, I've got a problem. I took my iphone 5s from usa to poland i put polish card and everything was ok but then i changed cards twice and my iphone is blocked now. It says it is not the fault of the phone but i should install the card SIM which is serving but when i put an American card it is also the same i hope you can help me to deal with it.

Hello emilcia,
Thanks for using Apple Support Communities.
Did you unlock your iPhone? The following support article explains about the process of unlocking:
iPhone: About unlocking
http://support.apple.com/kb/HT5014
Take care,
Alex H.

HP Officejet 7410 All-In-One Doesn't work after installing Snow Leopard

installed Snow Leopard yesterday ....my HP 7410 printer doesn't work properly ....take a look at the response the HP Service Center gave me:
+Hello Charles,+
+Thank you for contacting HP Total Care.+
+I understand from your email that you want the 'HP Officejet 7410 All-in-One Printer' software driver for 'MAC OS X 10.6'.+
+I appreciate for the opportunity to assist you.+
+*Charles, I regret to inform you that the unit does not support the operating system. I recommend you change the OS to Microsoft Windows to avail the unit software driver.*+
+I will be more than happy to assist you when you change the OS.+
+For information on keeping your HP and Compaq products up and running, please visit our Web site+
at:
+http://www.hp.com/go/totalcare+
Sincerely,
Sentinaro
+HP Total Care+
+Our advice is strictly limited to the question(s) asked and is based on the information provided to us. HP does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information. Always back upyour data.+
+For more information, including technical information updates, please visit our Web site at http://www.hp.com/support.+
+HP does not require you to send any financial data in your reply to this email. As a prudent reminder, do not insert credit card details or other financial information in any e-mail replies.+

Help! I've spent hours researching this and can't find a solution...
I upgraded 3 Intel Macs in the house to Snow Leopard last weekend. All went differently...but all were successful. I found that the connection to my HP Officejet 7410 (connected wirelessly to 802.11g Airport Express (AEX) network) was "broken". Deleted then "re-intalled". Documents could now be printed. I then found out scan function was "broken". Figured out how to scan with new Snow Leopard "baked-in" driver and Scan tab...different, but it worked.
Then, tonight, on the eve of my birthday, I was given the green light to purchase an Airport Extreme 802.11n (dual-band) base station (AEBS). I set it up and got 2.5X speed on the two 802.11n laptops in the household. Glorious! Then I went to work to ensure print and scan functions were still operational. Tried to re-connect HP OJ 7410 to wireless network...when it found the network it asked for the "WEP" key (on previous AEX network I was secured utilizing WPA2/Personal)...I entered the WPA2/Personal password (same as previous network) and got the error message "Key must be 5 or 13 characters OR 10 or 26 length with 0-9 and A-F (hex)". So I turned off the wireless radio and instead plugged the 7410 into the AEBS via USB. Deleted the previous queue and re-installed. Found the printer no problem but now without the Scan tab or function anywhere...despite following all the recommendations found both on the HP site and here in the Apple Forums. I print fine. Can't for the life of me figure out what the problem with the now lost again Scan function is.
Only strangeness I can think of is the following: When setting up the network(s), I had the option of naming the 5 ghz band something different. I set mine up with the same name of the 2.4 ghz network with 5ghz in parenthesis (i.e. BobbyG and BobbyG (5 Ghz)).
Sorry for the long post but we need the scan function in the house for my wife's teaching purposes. Any assistance would be GREATLY appreciated.
Very Respectfully,
Bobby G.

HP Printer doesn't work after changing computers

Similar Messages

Maybe you are looking for