HT201263 i tried this but it didnt work, i restored it, but it still says connect to itunes! now what do i do?
my 4th generation ipod is stuck in recovery mode. ive restored it a few times but its still in recovery mode. what do i do now?
http://support.apple.com/kb/HT1212
Similar Messages
-
please help!!!!! i dont want to loose all my data, cant itunes please send it to me?
As user Wjosten previously replied to another user with that problem:
"Then you'll have to force the phone/touch into recovery mode & restore it:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still dont see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new." -
I restored and updated my iPod, but when I turned it on, it still says connect to iTunes
My brother just got an ipod for Christmas, and we told him not to put a passcode on it because he would forget... but he did it anyways and he did forget! He ended up disabling it trying to unlock it. It said ''Connect to iTunes." When I connected to iTunes, it said it was disabled and needed the passcode to do whatever, but I held the top button and the home button down for ten seconds to Restart it because we don't know the passcode! It said to Restore and Update, so I did that. Now it's in Recovery mode... and I can't get past that part! I thought I had done it right, but when it turns back on, it still says connect to iTunes! Help??
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I just restored my ipod and backed it up but it still says connect to itunes
I just restored my ipod and backed it up but it still says connect to itunes.Help.
If the restore was successful, that is went through all the steps without errors then likely:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. . -
can some one help with my iphone 4 not switching on , well it show swipe to switch on wich says configure , when swipe it says connect to itunes.
so hae done that but then what??Try holding the sleep/wake and home button til the phone turns off then turn it back on using the sleep/wake button. This resets the phone. If you still have trouble connecting to the netwok then try Settings>General>Reset>Reset network settings. This should clear it up. If not then try to restore your phone using itunes.
-
I am trying to set up my new iPhone 5s with iTunes, I've connected my phone to the computer and synced all of my apps and music, but the screen on my phone still continues to say connected to iTunes and doesn't seem to be continuing on with the set up. Any ideas on what's wrong?
Hi Bomag,
If you are having issues restoring your iPhone and are unable to get past the Connect To iTunes screen, you may find the troubleshooting steps outlined in the following article helpful:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
- Brenden -
My iPod Touch just keeps saying "Connect to iTunes" when it is connected to iTunes. I've tried everything, too.
Since the maximum OS X version for an eMac is 10.5, how are you running OS X 10.7.5 on the eMac?
http://support.apple.com/kb/TS1591 -
Everytime I power on my iphone it says connect to itunes and when I do itunes says restore iphone but all my infomation is saved to my iclouds but its not giving me that option to restore it and without it I cannot do anyting with my phone. Please help me this is so stressful.
UNABLE TO RESTORE (connect to iTunes with cable logo)
If you are trying to restore and you device shows an image of a USB cable and connect to iTunes then carefully follow -
my ipad was in recovery mode and it went back to the home screen and it found my info on itunes to the point where i can put music on it but it still says connect to itunes
sarahwood wrote:
.. it said my iPod was in recovery mode and I needed to restore it?
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
To minimise loss... after the successful Recovery... Restore from the most recent Backup...
See Restore from Backup here
http://support.apple.com/kb/ht1766 -
how do i restart my ipod touch if the power off button does not work and it is disabled and it say connect to Itunekyl
Place the iPod in recovery mode using this program. and then restore via iTunes.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
my phone 4s is locked and I cant unlock it unless I connect to ITunes but when I connect it, it doesn't work.
what do I do ?Have you tried any troubleshooting?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
Restore: Connect your iPhone to iTunes on your computer, backup, and then select Restore to Factory -
I cannot get past the connect to itunes to activate screen, i can't even get to the home page with apps and stuff. I bought the iphone used, and was hoping to set it up with prepaid, but I can't get it to activate. I connect it to itunes, and it downloads the new software, and still will not go past the activation screen.
It sounds like you bought a jailbroken phone (assuming you didn't jailbreak it yourself). Take it back for a refund.
-
An icon has appeared on my desktop called colour sync utility. I clicked on it, and it came up with information about needing to repair something which I tried to do but it didnt work. What is this and shouldI be worried ?
The Color Sync Utility is part of OSX and usually resides in the Application/Utilities folder.
Don't know how it appeared on your desktop.
But it is no malware, spyware or the like but as said part of OSX.
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8476.html
Stefan -
I have Photoshop and Elements 9, and im getting a new computer. I would like to put them on the new one. I tried my serial number but it didnt work. I dont know what to do?
Error "The serial number is not valid for this product" | Creative Suite
-
i forgot my password to my new gold 5s iphone got it 2 days ago. i got locked out after trying mant codes i did one very fast and got in i tried to change the password but i forgot it again! i got locked out again and it says iphone is disable connect to itunes.i tried to reset my phone but i didnt work.
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Maybe you are looking for
-
Error: Path to object does not exist at Request
Hi experts, i have a scenario asynchronous/syncrhonous: file to rfc and get back response rfc to other file. I have 3 communication channel: 1 sender file, 1 receiver file, 1 receiver RFC. The communication channel sender file show the follow error:
-
Firefox 6.0 AND 6.1 ALWAYs loads compatibity check and then what's new page as well as my home page
<blockquote>Locking duplicate thread.<br> Please continue here: [[/questions/866032]]</blockquote> The problem is that EACH TIME I open Firefox 6.0 and now 6.1 I just installed it runs a compatibility ad-on check AND then opens the "what's new?" page
-
Setting the Link Group Name in Deep Link based on the value of a column
Using Jdeveloper 11g, Jheadstart 11g Is it possible to override the link group name in deep linking. For example can I conditionally set that field based on the value of the item. Regards Edited by: aliegeh on Jul 25, 2010 8:35 AM Edited by: aliegeh
-
Why does a black and white picture come out with a tint? iPhoto, Canon
When I print a black and white picture from iPhoto, it comes out with a tint. How do I prevent that? iPhoto, Canon MX310
-
Simple slideshow, will not work in as 3.0
L.S. I have this little slideshow, it is for practise for my students. It always worked well in as 2.0, 5 slides, and two buttons: back and next. The script in2.0 has: prevFrame and nextFrame in the code and for the exceptions in frame 1, and frame 5