HT2731 Problem with billing setup?

When I'm setting up my billing information in the itunes store, it tells me I need to contact itunes support to complete this transaction? Anyone else have this problem?

I have the smae problem, I can't figure out why.

Similar Messages

Problem with billing date at closed period

Hi
We have a problem with billing date in transaction . Previously we could set up different (earlier) billing date than the actual posting period and now it is not working. We receive an error message that the posting period is closed ) .
I attached an example invoice which we managed to post and where you can see what Iu2019m thinking about, parking number: 1024337, BILLING DOCUMENT: 841835. In this case the billing date was at 30.11.2007, but the posting in 15.07.2008 and we managed to post.
Pls help that issue
yps

hi,
it is due to posting period closed for the month of 07/2008.
u need to open posting during that period.
Regards,
Greeshma

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

HT204088 I have a problem with billing info.....

After the last purchase, it said that was a problem with billing the last purchase and need to verify my billing info, i put the password, trying to load and after few sec asks me again,i put again...the same....i tried at least 10 times and does that.....i check if my creditcard didnt have money and it has......i check the password it works (i tried a wrong pass and corrected me)......WHat is going on??? Please help....

I think iPhone is jus a bloody rip off I downloaded a app now I can't download another app I called customer service more then 10 times today they took away 15 pounds of my call time so I would recommend everyone not to use I phone they don't give much help but they love ripping poor customers like myself

I can't open my apple id. Says i have a problem with billing, but really i don't have any problem with my billing

I can't open my apple id. Says i have a problem with billing, but really i don't have any problem with my billing

If you see a message that's there's a billing problem, you need to contact Apple directly > Mac App Store - Apple Support

Problem with billing

says problem with billing and will place order later...
why?

Hi sekouc5321777,
I see you placed two orders today for an Acrobat subscription. One was "unauthorized," but I can't see why (maybe an typo on the credit card number or exploration date?). The other is currently processing.
Please let us know if you have additional questions.
Best,
Sara

Problem with TMS setup in HA systems

Dear colleagues,
Our team have installed a new production environmnent to ECC in HA. We have a ASCS in cluster and two dialog instance in each server(local instance).
A virtual host GPPR3CIB and two instances in local, node GPPR301 and node GPPR302. This is an ECC 6.0 on Windows 2003 Server and SQL server 2005.
The architecture is as follows:
- GPPR301 node:
   - Virtual ASCS ASCS_0 (message server)
   - ABAP Primary Instance PPR301_1 (disp+work)
   - ERS (Enqueue replication server) instace ERS_10
- GPPR302 node:
   -ABAP Additional Instance PPR302_2 (disp+work)
   -Virtual Database Instance GPPR3DB
   -ERS (Enqueue replication server) Instance ERS_10
Once the installation is complete you need to apply SAP Note No. 943334 - "TMS setup in high availability systems" to set up high availability STMS. The problem is to distribute the configuration after running
the report " 'TMS_MGR_LOADBALANCING" described in SAP note.
The message indicates problems trying to run the command tp.exe. It has followed the note No. 1010990 and we have checked the folder permissions of the kernel but the problem persists.
Any information or help regarding this type of setup would be welcome.
Thanks.

Hi,
We have solved the problem with STMS. After several tests, the problem was in the parameter SAPLOCALHOSTFULL. This parameter must be assigned the hostname of the local system for each profile instance. If you've assigned the virtual host in the cluster generates the error in the distribution of the STMS.
Regards.

Problem with Billing due list, relating to Returns Credits

Hi
I have a query/ problem with the billing due list
I cannot seem to be able to create billing documents via VF04 for Returns credits, only via VF01
I have changed Billing relevance of Item category REN to be A - Delivery related,
As we previously had problems with incorrect qty being billed IF returned delivery quantity was different to Returns order quantity - this resolved the problem but I now cannot create billing via billing due list
Messsage appears ' delivery type LR cannot be invoiced with billing type F2'
If i enter billing type RE then the document is not gettting picked up at all
when Billing relevance of item category was B, order related - all seemed to be working ok
I have copy controls set up from LR to RE with item category REN, with pricing type G
Please advise how i can get the Returns to appear in the billing due list
many thanks for your help
Tony

Hi,
In copy controll VTFL
LR to F2 at item level
REN >>> Deatila >>> Put billing quantity as - D delivery related
Kapil

Problem with Billing Information

Hello,
Just recently, about 5 months ago, I recieved a Visa giftcard for graduation. I used that as my billing information; chose VISA as the card and then put in the card number. After I was done picking my desired songs, it told me there was a problem with my information and that it had been declined or something. It also said I would have to resolve it before I would be able to purchase more songs.
So are we not allowed to use VISA gift cards? Now I have a iTunes gift card that I want to use and it wont let me because this previous problem has not been resolved. What do I need to do? I'd rather not have to repay this or have to use this iTunes gift card to pay for it. There was money on that VISA card and I used it to buy songs. I do not have a credit card to repay it either. What do I do?
Thank you so much.

I experienced the same problem around the same time. After several less than helpful and very frustrating emails from Apple Support, I happened upon a very simple solution that solved my problem. I went into "Edit Payment Information", and I re-entered my credit card information, security code, etc... just like I had tried a thousand times before. BUT this time, I TYPED IN A SPACE AFTER MY FIRST NAME. It worked. It finally accepted my credit card information.
They tell you to enter your name just as it appears on your bank statement. It just never occurred to me that they meant to include spaces. I would assume that if your bank prints your middle initial on your statement, you should include that in the "First Name" box as well along with any applicable punctuation. For example, Joe(space)S.(space).
I offered this advice to my friend as she was having the same problem, and it worked for her, too. So, you might want to give it a try.
Message was edited by: Max Colevan

Problem with J2SDK setup

Hi all,
I am experiencing problems with my J2SDK setup. I think my problem due to many previous versions of JDKs.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
I would be really grateful to you (and anyone else) for help with this problem.
Regards,
Vipul

Hi,
Thanks for getting back to me. I have altered my CLASSPATH and path. Unfortunately it is still not working. I have run java using the full path to the jdk and the jars are loaded in from the right place, but I still get the noclassdeffound error. I have removed all references to CLASSPATH and PATH. When I run with the verbose option (with no ref to the jdk in any variable), the jar files are loaded in from C\program files\java\j2re1.4.2_03! But there is no reference to this location in any variable.My j2sdk is installed in C:\j2sdk1.4.2_03.
Currently ,
CLASSPATH =".;C:\Program Files\eclipse\plugins\org.eclipse.swt.win32_2.1.1\ws\win32\swt.jar;C:\cygwin\usr\share\postgresql\java\postgresql.jar; C:\Program Files\Database Report Writers\DB Drivers\pg73jdbc.jar "
And PATH = " %SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\cygwin\bin;C:\Program Files\Common Files\Adaptec Shared\System;C:\MSSQL7\BINN;C:\tools\ant\apache-ant-1.5.3-1\bin;C:\Program Files\cvsnt;C:\tools\ant\apache-ant-1.5.3-1\bin;C:\tools\maven\maven-1.0-beta-11-SNAPSHOT\bin "
Please help.
Ciao,
Vipul

Problem with audio setup of IDT

Sorry, if this question isn't for this forum, but I need the solve of this problem
HP Pavilion dv6-6c53er.
Hello, it's me again.
My notebook is dv6-6c53er with two earphones outs and one microphone. So, I want to ask you a question. Can I set my earphones outs for different tasks or can I set them as independed outs. My English isn't so good, but that isn't so good, when i'm listening my music and when i get a message in skype - my music in earphones out is lost, but I hear Skype (soung of message), and music is playing on beats speakers, and past 2 seconds - again (in earphones - music, on speakers - nothing).
So, the problems are:
1) How I can set settings for each earphone out (to do it independed or to play different sounds)?
2) What Can I do with problem with Skype and outs?
3) Help me, please with settings in Traktor, because at Native Instruments forum I didn't receive resolve of my problem...
And problem with Traktor is:
I can't to set each earphone out for playing each deck in Traktor.
Help me, please with this problems!
Yours, Xardas007

I have the same problem. I was however able to install 9i. Then I was able to use the 9i Installer to install the 8.17 software. But I can not run the 8.17 Database Configuration Assistant. It will not start same as the 8.17 setup.exe.

Problem with keyboard setup.

Hi
I am having problem with my keyboard setup. When clicking the option key (alt) and a number key no symbols appear. Instead the computer gives away a beep. If I view the Keyboard viewer the symbols appear correct. I have created a new user and tried logged in as the new user. Then the symbols appear instead of the beep. What strange settings can I have made?
Thanks for your help.
/Erik

Yo
I seemed to have a folder in my users Library folder called KeyBindings and a file in there called DefaultKeyBinding.dict. When removing this everything was back to normal. So seems as though the file was steeling my option key mapping. Not good.
/E

Problem with Multiserver setup in LMS4.01

Hello,
we have a problem with a Multiserver setup in LMS4.01.The devices that should be manged in the slave server stay in unmanaged state.
Our goal configuation is:
Server-1 = DCR-Master
Managed devices = 4200
Apllications = RME, CM, IPM
Server-2 = DCR-Slave
Managed devices = 150 (this number is a subset of the 4200 devices on Server-1)
Applications = DFM + HUM
We created on the master-server a user-defined group with 150 critical devices and we configured a Master-Slave Setup as described in the documentation:
- Master Server - creating a peer user
- Slave Server - Creating a system identify user (with the same name/password as the peer user on the master server)
- Master + Slave Server - Creating certificate on slave + master server and import these certificates to each other
- Master Server - Enabling DCR-Master mode
- Slave Server - Enabling DCR-Slave mode
- Slave Server - Enabling at device allocation settings the functions <Inventory Mgmt>, <Fault Mgmt> and <Performance Mgmt> only
- Slave Server – Creating policy configuration for device allocation for the user-defined critical device group only
When I create the policy configuration on the slave server I can see all devices in the DCR and I can also see the user-defined group with the critical devices that I created on the master server. So there shouldn't be a problem with certifiactes or the peer/system identify users.
Now I would expect that I see the 150 imported devices in the slave server in a managed state. But when I check “Inventory> Device Administration> Manage Device State” in the slave server I see all 4200 devices in unmanaged state. And this looks wrong.
Any ideas about it?
Thanks + Regards
Hendrik

Hi Tomasz,
Nope. No solution from anyone. I had been fighting with it with several SAP Notes but not yet success. I opened a ticket with SAP but no solution yet.
I think it caused by our already existing SSL and integration with federated Portal.
I don't have any system with the same software to compare.
I followed all related notes by the book. My system was upgraded from BW 3.0B to NW04s SR1 SP Stack 10 then new Java add-in installation with usage BI-JAVA & EP SP Stack 10 .
I will conquer this some day- Wish me luck!
Thanks.
Mimosa

I have problems with billing information when setting my itunes

Hi, guys. I'm a new owner of an Ipad gen.3.
I was trying to use my itunes - in order to install and use other apps, and after entering all the info required on BILLING, the system wouldn't work, but sends me to contact AppleSupport. It does not specify what exactly is wrong. Do I have to wait for a while or what? I always had problem with understanding such technology, though I'm using my macbook since 2006.
Thanks in advance.
Regards
Wednesday

Hello, FridayWednesday.
Thank you for visiting Apple Support Communities.
If you are receiving a message to Contact Apple Support, I would recommend reaching out to us via the link below.
Contact Apple for support and service
http://support.apple.com/kb/he57
Cheers,
Jason H.

Problems with email setup on my E72

I have problems with my email setup, the phone will not notify me when a new email arrives. I have had the unit in the shop, tried to get help form my service provider, have sent it back for repairs and it still will not work properly. The repair centre told me that it does have the latest software on it and said it should work fine. It,s a brilliant phone but this so frustrating. I would appreciate some help to get this sorted. Thank you, fuzzy2

Check homescreen applications-> e-mail notification.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

HT2731 Problem with billing setup?

Similar Messages

Maybe you are looking for